XC5VLX30-1FFG676C - 30K Logic Cell FPGA | AMD
MPN: XC5VLX30-1FFG676C ✗ Akhir HayatXC5VLX30-1FFG676C Ringkasan
A field-programmable gate array, or FPGA, is a programmable digital semiconductor whose logic fabric and interconnect can be configured after fabrication. An FPGA belongs to the broader semiconductor and programmable-logic hierarchy, where it sits between fixed-function ASICs and software-programmable processors. It combines configurable lookup tables, flip-flops, block RAM, programmable I/O, dedicated hard processors, and digital clock-management resources on one device.
The XC5VLX30 provides 30,720 configurable logic cells for parallel data processing, protocol bridging, control logic, signal acquisition, and embedded system functions. Its stated 400 I/O supports connections to external memory, interfaces, converters, and custom peripherals. Block RAM supports buffering, packet storage, and data-plane functions, while dedicated DSP slices accelerate multiply-accumulate operations commonly used in communications and signal processing.
The 65 nm CMOS implementation belongs to the Virtex-5 generation of AMD FPGA technology. Its configurable architecture allows a common board design to support multiple firmware or bitstream configurations, reducing the need for separate custom silicon. Selection still requires verification of the selected I/O standard, clock topology, memory interface requirements, pin constraints, and timing closure for the target design.
Typical applications include industrial communications equipment, test and measurement systems, video and image processing, network interface controllers, high-speed data acquisition, and embedded control platforms. The large logic capacity and 676-ball package make the device appropriate for designs requiring substantial parallel resources rather than simple interface bridging or small control tasks.
Board implementation must follow the AMD Virtex-5 package pinout and layout guidance. Decoupling, power-plane integrity, clock routing, and high-speed signaling are especially important in a 676-ball FCBGA design. PCB stackup, via counts, controlled-impedance routing, and thermal management should be reviewed before the footprint and power architecture are released.
This page combines the exact ordering information, package identity, technology details, verified drop-in candidates, and application-specific engineering guidance needed to evaluate the XC5VLX30-1FFG676C. It also highlights the limits of automatic substitution, particularly when speed grade, temperature grade, device generation, or bitstream compatibility differs.
Pilihan pengganti yang segera untuk XC5VLX30-1FFG676C — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera XC5VLX30-1FFG676C (sama faktor bentuk dan kaki) — berbeza dalam Device Type, Package, Temperature Grade, Terminal Form, Logic Cells.
XC5VLX30-1FFG676I
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →XC5VLX30-2FFG676C
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →XC5VLX30-3FFG676C
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →XC6VLX30-1FFG676C
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
XC5VLX30-1FFG676ES
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
XC5VLX30-1FFG676C Penilaian maksimum & Ciri-ciri Elektrik
| Device Type | Virtex-5 LX Field-Programmable Gate Array |
| Logic Cells | 30,720 cells |
| Number of I/O | Approximately 400 I/O |
| Fabric Memory | 1,179,648 bits |
| Process Technology | 65 nm CMOS |
| Core Supply Voltage | 1 V |
| Kemasan | 676-ball FCBGA |
| Package Designation | FFG676 |
| Speed Grade | -1 |
| Temperature Grade | Commercial |
| Technology Family | Virtex-5 LX |
| Programmability | SRAM-configurable FPGA |
| Jenis Pemasangan | Surface mount |
| Kiraan Pin | 676 balls |
Panduan Konfigurasi Pin XC5VLX30-1FFG676C ffg676
Konfigurasi pin untuk XC5VLX30-1FFG676C (ffg676 pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk XC5VLX30-1FFG676C.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
XC5VLX30-1FFG676C patut untuk 6 aplikasis: Industrial Communication Equipment, Test and Measurement Systems, High-Speed Data Acquisition, Video and Image Processing, Network Interface Controllers, Embedded Control and Instrumentation.
Industrial Communication Equipment
The XC5VLX30-1FFG676C fits industrial communication systems that require parallel protocol conversion, buffering, and supervisory logic around multiple external interfaces. Its 30,720 logic cells and approximately 400 I/O provide substantial capacity for Ethernet or industrial bus bridging, packet classification, and control-plane functions. The commercial C suffix must remain within its specified operating-temperature limits; use the XC5VLX30-1FFG676I candidate when industrial-temperature operation is mandatory. A 676-ball FCBGA also requires a multilayer PCB with carefully controlled power delivery and signal-integrity design.
Test and Measurement Systems
The Virtex-5 LX architecture is suitable for test and measurement instruments that combine acquisition control, pattern generation, timing logic, and data processing in one FPGA. The XC5VLX30's 30,720 logic cells can implement parallel state machines and control channels, while its fabric memory supports buffers and temporary test-pattern storage. Designers should allocate specific I/O standards to the ADC, DAC, clock, and trigger interfaces, then confirm pin placement against the 676-ball package file. Clock jitter, termination, analog-device grounding, and FPGA power sequencing are central to repeatable measurement performance.
High-Speed Data Acquisition
The XC5VLX30-1FFG676C can support high-speed data-acquisition systems by combining configurable digital logic with approximately 400 package I/O. Parallel interface logic, capture control, data formatting, and downstream processing can be implemented in the 30,720-logic-cell device. Performance depends on correct I/O-standard selection, source-synchronous clock routing, board-level impedance control, and timing closure. The commercial temperature grade should be checked against the acquisition enclosure's worst-case ambient conditions, and the design should include margin for FPGA power consumption during wide-lane transfers.
Video and Image Processing
The XC5VLX30-1FFG676C is applicable to video and image-processing systems requiring parallel pixel pipelines, frame buffers, timing generation, and control interfaces. The device's 30,720 logic cells and 1,179,648 fabric-memory bits provide resources for pipeline processing and temporary buffering, while the large I/O count supports parallel sensor and display connections. Memory-mapped frame-buffer traffic must be balanced against available block RAM and external-memory bandwidth. Video designs should also verify whether legacy Virtex-5 video IP, clocking architecture, and licensing requirements still match the product roadmap.
Network Interface Controllers
The XC5VLX30-1FFG676C can implement network-interface and packet-processing logic where several channels, queues, and protocol layers must operate concurrently. Its 30,720 logic cells support parallel datapaths and state machines, while fabric memory provides storage for packet buffers and descriptors. External PHY or serializer interfaces require careful assignment of I/O standards, differential-pair routing, and reference-clock distribution in the 676-ball FCBGA layout. For production continuity, verify that required network IP, bitstream-generation tools, and device support are appropriate for a legacy Virtex-5 design.
Embedded Control and Instrumentation
The XC5VLX30-1FFG676C can serve as the central programmable controller in sophisticated instrumentation that requires simultaneous motor sequencing, sensor conditioning, safety interlocks, and data processing. Programmable logic can coordinate multiple I/O, implement deterministic control paths, and isolate timing-critical functions from a higher-level processor. A 676-ball package exposes substantial connectivity but also demands careful escape routing and a stable multilayer power architecture. The commercial-grade suffix limits environmental suitability, so temperature margins and protective enclosure design must be reviewed before deployment in variable industrial conditions.
Data referensi kejuruteraan untuk XC5VLX30-1FFG676C — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | XC5VLX30-1FFG676I | XC5VLX30-2FFG676C | XC5VLX30-3FFG676C | XC6VLX30-1FFG676C | XC5VLX30-1FFG676ES |
|---|---|---|---|---|---|---|
| Package | 676-ball FCBGA | 676-ball FCBGA | 676-ball FCBGA | 676-ball FCBGA | 676-ball FCBGA | 676-ball FCBGA |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| FPGA Family | Virtex-5 LX | Virtex-5 LX | Virtex-5 LX | Virtex-5 LX | Spartan-6 | Virtex-5 LX |
| Speed Grade | -1 | -1 | -2 | -3 | -1 | -1 |
Penyeberangsung Jelas
- Directly matches the original commercial-grade configuration (vsXC5VLX30-1FFG676I)
- Provides a faster timing candidate without changing the package (vsXC5VLX30-2FFG676C)
- Supports the broadest same-package speed upgrade (vsXC5VLX30-3FFG676C)
- Offers a same-package migration path to a newer FPGA family (vsXC6VLX30-1FFG676C)
Catatan Desain
Use the official AMD Virtex-5 package file to assign every one of the 676 balls before schematic capture is released. The FFG676 footprint requires dense escape routing, adequate power and ground connectivity, and a multilayer PCB designed for the selected I/O standards. Verify exposed-pad or thermal-via requirements, package dimensions, solder-mask clearance, and assembly-handling allowances against the controlled AMD package drawing.
Plan the 1 V core rail and auxiliary I/O rails as a complete power tree with correct sequencing, decoupling, and point-of-load regulation. Follow the AMD recommended schematic and PCB guidance for rail partitioning and capacitor placement. Estimated: at a 1 V core rail and 1 A total core current, core-rail dissipation is 1 W before accounting for I/O and auxiliary supplies; actual device power depends on the implemented logic and switching activity.
Assign high-speed interfaces only after checking the supported I/O standards, clock requirements, and board-level reach of every lane. Use the device speed grade for timing analysis, because replacing a -1 grade with -2 or -3 can alter timing margins and power behavior. Validate source-synchronous interfaces, differential pairs, external memory routing, and impedance-controlled nets with the complete system, not only the FPGA.
Model worst-case FPGA activity, ambient temperature, airflow, and board copper when selecting the PCB stackup and cooling strategy. Estimated: each watt of local dissipation in a 65 nm FPGA can materially raise junction temperature in a dense 676-ball package. Use the AMD power-dissipation methodology and package thermal data for final calculations, then reserve copper and vias around the device where the package construction permits.
Maklumat Kesediaan
The commercial C suffix is identified in the ordering information. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from current manufacturer or lot documentation.