XC5VLX50-1FFG324CES - 46,080-Cell Virtex-5 LX FPGA | AMD
Référence : XC5VLX50-1FFG324CES ✗ Fin de vieXC5VLX50-1FFG324CES Présentation
A field-programmable gate array, or FPGA, is a programmable digital logic device whose configuration defines interconnect paths and circuit behavior after manufacture. In the semiconductor hierarchy, an FPGA belongs to programmable logic devices and combines the flexibility of software-programmed logic with the deterministic timing, parallelism, and high I/O density of an application-specific integrated circuit. This makes FPGA devices useful when algorithms, interfaces, or system requirements evolve faster than fixed-function silicon development cycles.
The XC5VLX50 part contains 46,080 logic cells and 220 user I/O in a single 324-pin FCBGA. A reported configuration density of 1,769,472 is associated with the device family in its technical listing. The -1 suffix denotes a particular speed grade, and the 324-pin BGA construction supports dense board-level integration without exposing leads. The 19 mm by 19 mm package also requires careful PCB escape routing, adequate via access beneath the device, and thermal analysis because the large BGA concentrates heat beneath the package.
The core device is manufactured on a 65 nm CMOS process and operates from a nominal 1 V core supply. This combination of logic capacity and process technology supports parallel datapaths, protocol bridging, control-plane processing, DSP pipelines, and high-speed interface aggregation. Because FPGA performance depends on routing, constraints, clocking, and tool flow rather than processor clock speed alone, final timing closure must be verified with the appropriate AMD FPGA design tools and the selected Vivado or ISE generation supported by the device.
Typical uses include industrial control and monitoring, communications infrastructure, test and measurement, embedded signal processing, high-speed data acquisition, and networking equipment. The 220 I/O support is especially useful where the design must connect multiple buses, clocks, serial links, status signals, and high-speed parallel interfaces. The same device can implement multiple independent logic functions, and unused pins should be handled according to the manufacturer package and design guidance rather than treated as general-purpose inputs.
PCB design should prioritize a continuous, low-impedance supply plane and short connections from decoupling capacitors to the relevant power balls. High-speed nets require controlled-length routing where timing relationships exist, while BGA escape paths should follow the AMD package pinout files. Thermal design should model normal operation and worst-case utilization because power dissipation varies with configuration, clocking, I/O activity, and the selected design. Configuration storage, startup behavior, clock sources, and JTAG access must also be planned before PCB release.
This product page combines the exact ordering information, package identity, technical specifications, sourcing structure, drop-in family alternatives, comparison parameters, and practical PCB guidance for XC5VLX50-1FFG324CES. It is intended to support hardware planning, legacy-design maintenance, and qualification of this specific 324-BBGA Virtex-5 LX device rather than generic FPGA selection.
Alternatives de remplacement direct pour XC5VLX50-1FFG324CES — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec XC5VLX50-1FFG324CES (même facteur de forme et même empreinte) — différant par Package, Device Type, Package Type, Core Supply Voltage, Logic Cells.
XC5VLX50-1FFG324C
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →XC5VLX50-1FFG324I
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →XC5VLX50-2FFG324C
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →XC5VLX50-1FF324C
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →XC5VLX50-1FF324I
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →XC5VLX50-1FFG324CES Valeurs maximales et caractéristiques électriques
| Device Type | Virtex-5 LX field-programmable gate array (FPGA) |
| Logic Cells | 46,080 cells |
| User I/O | 220 I/O |
| Reported Configuration Density | 1,769,472 |
| Process Technology | 65 nm CMOS |
| Core Supply Voltage | 1 V nominal |
| Boîtier | 324-BBGA FCBGA |
| Package Dimensions | 19 mm x 19 mm |
| Nombre de broches | 324 pins |
| Speed Grade | -1 |
| Device Family | Virtex-5 LX |
| Programmable Logic Type | FPGA |
| Type de montage | Surface-mount ball grid array |
Guide de configuration des broches du XC5VLX50-1FFG324CES 19 mm x 19 mm
Configuration des broches du XC5VLX50-1FFG324CES (boîtier 19 mm x 19 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour XC5VLX50-1FFG324CES.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
XC5VLX50-1FFG324CES convient pour 6 applications: Industrial Control and Automation, Communications and Network Interface, Test and Measurement Instrumentation, High-Speed Data Acquisition, Embedded Signal Processing, Aerospace and Defense Systems.
Industrial Control and Automation
The XC5VLX50-1FFG324CES fits industrial controllers that combine machine logic, sensor acquisition, communications, and safety-adjacent monitoring in one programmable device. Its 46,080 logic cells and 220 user I/O provide substantial parallel connectivity for digital I/O, counters, timers, interlocks, motor-control sequencing, and industrial protocol bridges. The -1 speed grade and nominal 1 V core make it appropriate for systems whose timing closure was established around this device family. During design, use the released AMD ball map to allocate banked I/O, isolate configuration pins, and maintain continuous power planes across the 19 mm by 19 mm FCBGA footprint.
Recommandé
Communications and Network Interface
XC5VLX50-1FFG324CES is suitable for network-interface equipment requiring deterministic parallel datapaths, buffering, packet processing, and multiple external interfaces. Its 220 I/O can accommodate control channels, clocks, status signals, and parallel data paths, while the programmable Virtex-5 LX fabric can implement protocol state machines, FIFO logic, and traffic classification concurrently. The 1 V core and 65 nm process support a compact, high-density implementation without a separate processor for every interface function. Engineering teams should constrain clocks and high-speed interfaces carefully, account for package escape delays, and validate signal integrity against the selected I/O standards.
Recommandé
Test and Measurement Instrumentation
The XC5VLX50-1FFG324CES fits modular test and measurement equipment that requires flexible acquisition, sequencing, trigger logic, and instrument-bus connectivity. Its 46,080 logic cells can implement parallel data paths, digital calibration tables, pattern engines, and control sequences, while 220 I/O provide access to sensors, relays, counters, clocks, and high-speed test ports. Programmability permits a single platform to support multiple test configurations without redesigning fixed ASICs. For accurate results, the PCB should provide clean references, low-noise supplies, robust clock distribution, and carefully controlled input thresholds, with timing closure checked using the constraints appropriate to the selected instrument architecture.
Recommandé
High-Speed Data Acquisition
XC5VLX50-1FFG324CES can serve as the digital control and acquisition fabric in systems that combine parallel sensors, converters, memory, and real-time processing. The device's 220 I/O support parallel sample buses and associated control signals, and its programmable logic permits flexible channel multiplexing, digital filtering, timestamp generation, and buffer management. The 65 nm Virtex-5 LX implementation offers substantial logic density for parallel rather than sequential architectures. Board designers should separate analog and digital return currents, provide multiple decoupling paths to the FCBGA power balls, and use the AMD pinout files to route every high-speed acquisition signal without introducing excessive skew between channels.
Recommandé
Embedded Signal Processing
XC5VLX50-1FFG324CES is suitable for fixed-point filtering, correlation, waveform generation, and other parallel signal-processing functions that benefit from hardware pipelines. Its 46,080 logic cells allow multiple arithmetic pipelines to operate concurrently, while the programmable interconnect lets designers place registers and arithmetic stages for timing optimization. The fixed function of the FPGA also avoids the overhead of executing repetitive filtering operations in software. Engineers should use the device documentation to confirm DSP, block-memory, and clock resources, then apply placement and timing constraints so pipeline stages meet the required throughput without relying on assumptions about general-purpose processor performance.
Recommandé
Aerospace and Defense Systems
XC5VLX50-1FFG324CES can support legacy aerospace, defense, and mission-critical subsystem functions where programmable logic, deterministic behavior, and high I/O density are valuable. Typical uses include telemetry processing, command decoding, redundant control logic, interface conversion, and built-in test. The 46,080-cell Virtex-5 LX device and 220 I/O allow multiple channels to be integrated without relying on a fixed instruction set. However, spacecraft or military qualification cannot be inferred from the FPGA family name. The exact ordering suffix, radiation performance, operating temperature, package documentation, and long-term availability must be reviewed against the applicable program and certification requirements before new deployment.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour XC5VLX50-1FFG324CES — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | XC5VLX50-1FFG324C | XC5VLX50-1FFG324I | XC5VLX50-2FFG324C | XC5VLX50-1FF324C | XC5VLX50-1FF324I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 324-BBGA FCBGA | 324-BBGA FCBGA | 324-BBGA FCBGA | 324-BBGA FCBGA | 324-BBGA FCBGA | 324-BBGA FCBGA |
| Device Family | Virtex-5 LX | Virtex-5 LX | Virtex-5 LX | Virtex-5 LX | Virtex-5 LX | Virtex-5 LX |
| Logic Cells | 46,080 cells | 46,080 cells | 46,080 cells | 46,080 cells | 46,080 cells | 46,080 cells |
| User I/O | 220 I/O | 220 I/O | 220 I/O | 220 I/O | 220 I/O | 220 I/O |
| Speed Grade | -1 | -1 | -1 | -2 | -1 | -1 |
Principaux différenciateurs
- Exact legacy ordering-code identification (vs XC5VLX50-1FFG324C)
- Same core silicon capacity across primary family options (vs XC5VLX50-1FFG324I)
- Broader speed-grade option without changing package or logic density (vs XC5VLX50-2FFG324C)
Notes de conception
Use the released AMD Virtex-5 package pinout file as the authority for all 324 ball assignments. The 19 mm by 19 mm FCBGA requires multiple PCB layers to escape signal and power balls without long stubs. Place decoupling capacitors close to the associated supply and ground balls, provide a low-impedance plane under the device, and include accessible test points. Confirm the PCB stack-up, via-in-pad requirements, solder-mask rules, and assembly process with the selected package documentation before layout release.
Plan the power tree around the device's nominal 1 V core requirement and its separate I/O voltage domains. Do not assume that every bank can use the same external supply. Analyze worst-case core and I/O activity, configure the FPGA for the required operating mode, and include adequate bulk and local decoupling. If the clock or the -1 speed grade changes during an ECO, repeat power and timing analysis because utilization and switching activity can alter both current draw and thermal behavior.
Thermal design must account for heat spreading through the full 324-BBGA package rather than only the FPGA's nominal core voltage. Place the device over an uninterrupted ground or power-plane region, minimize thermal discontinuities in the multilayer PCB, and use the component's package heat-spreader and exposed-thermal features exactly as specified. Validate the final junction-temperature estimate against the highest sustained logic, clock, and I/O activity expected in the application, including worst-case ambient conditions.
A family-level match is not enough for a drop-in change. Compare the complete ordering suffix, speed grade, operating-temperature classification, released ball map, power-ball connections, configuration behavior, and lifecycle status. For example, XC5VLX50-2FFG324C changes the speed grade while XC5VLX50-1FFG324I changes the ordering classification. Rebuild the device constraints and programming file after any substitution, and rerun timing, power, and bitstream-generation checks instead of reusing an old implementation file.
Informations de conformité
No product-specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were included in the product records. These statuses must be confirmed for the exact legacy ordering code before use in regulated equipment.