XC5VLX50-1FFG324I - 46,080-Cell Virtex-5 LX FPGA | Xilinx
Référence : XC5VLX50-1FFG324I ✗ Fin de vieXC5VLX50-1FFG324I Présentation
A field-programmable gate array, or FPGA, is a programmable semiconductor containing configurable logic, memory, and input/output resources. Within the product hierarchy, an FPGA is a programmable logic device and a semiconductor. The Virtex-5 LX platform combines general-purpose programmable logic with block RAM, dedicated DSP resources, and high-speed selectable I/O, allowing one device to implement parallel processing, control, protocol, and data-acquisition functions.
Key device features include 46,080 logic cells organized into 3,600 configurable logic blocks, 1,769,472 total block-RAM bits, and 220 user I/Os. The FFG324 designation identifies the 324-contact fine-pitch ball-grid-array package. The -1 suffix denotes the device speed grade, while the industrial I suffix identifies the temperature grade. These features make the device suitable for telecommunications, industrial control, test equipment, signal processing, and embedded computing systems.
The Virtex-5 architecture is based on 65 nm CMOS technology and a 1 V core supply. Its distributed and block memory resources support high-throughput data handling, while dedicated DSP slices accelerate multiplication, filtering, and other arithmetic operations. Selectable I/O resources permit system designers to optimize interface rates and signaling according to board-level requirements.
Typical applications include network interface controllers, protocol bridges, video and image-processing pipelines, industrial automation controllers, radar and communications signal-processing modules, and high-speed test-and-measurement systems. The 220 available user I/Os support substantial external connectivity while the large logic capacity accommodates multiple parallel processing channels.
Design around the 1 V core rail and provide separate, properly decoupled auxiliary supplies according to the manufacturer power guidelines. Because the FFG324 package is a large ball-grid array, inspect every ball mechanically and electrically before assembly; a single defective solder joint can prevent configuration and make field diagnosis difficult.
This page combines device characteristics, package details, qualified drop-in alternatives, comparison parameters, and practical design guidance for engineers evaluating the XC5VLX50-1FFG324I.
Alternatives de remplacement direct pour XC5VLX50-1FFG324I — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec XC5VLX50-1FFG324I (même facteur de forme et même empreinte) — différant par Package, Device Type, Core Supply Voltage, Temperature Grade, Package Type.
XC5VLX50-1FFG324C
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →XC5VLX50-2FFG324C
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →XC5VLX50-1FF324I
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →XC5VLX50-1FF324C
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →XC5VLX50-1FFG324CES
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →XC5VLX50-1FFG324I Valeurs maximales et caractéristiques électriques
| Product Type | Field-Programmable Gate Array (FPGA) |
| FPGA Family | Virtex-5 LX |
| Logic Cells | 46,080 cells |
| Configurable Logic Blocks | 3,600 CLBs |
| Total Block RAM | 1,769,472 bits |
| User I/O Count | 220 I/Os |
| Process Technology | 65 nm CMOS |
| Core Supply Voltage | 1 V |
| Speed Grade | -1 |
| Temperature Grade | Industrial |
| Package Type | 324-pin FCBGA |
| Package Designation | FFG324 |
| Package Dimensions | 19 mm x 19 mm |
| Type de montage | Surface Mount |
| Manufacturer | AMD / Xilinx |
| Programming Support | Configurable programmable logic device |
Guide de configuration des broches du XC5VLX50-1FFG324I 19 mm x 19 mm
Configuration des broches du XC5VLX50-1FFG324I (boîtier 19 mm x 19 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour XC5VLX50-1FFG324I.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
XC5VLX50-1FFG324I convient pour 6 applications: Industrial Automation Controllers, Telecommunications Protocol Processing, Video and Image Processing, DSP and Digital Signal Processing, Test and Measurement Systems, Aerospace and Defense Control Systems.
Industrial Automation Controllers
The XC5VLX50-1FFG324I suits industrial automation controllers that combine machine control, safety-adjacent monitoring, and communications in one FPGA. Its 46,080 logic cells can implement multiple control loops, state machines, and protocol engines, while 220 user I/Os provide broad connectivity to sensors, actuators, and field buses. The 1 V core supply and 65 nm architecture support predictable integration into multi-voltage control boards. Designers should partition the FPGA between real-time control and supervisory communication, then apply timing constraints to every clock domain. Industrial use also requires thermal analysis across the full ambient range, robust power sequencing, and isolation practices appropriate to the external interfaces.
Recommandé
Telecommunications Protocol Processing
The XC5VLX50-1FFG324I can implement parallel framing, classification, buffering, and packet-processing functions for telecommunications equipment. Its 3,600 configurable logic blocks support multiple concurrent pipelines, while 1,769,472 block-RAM bits provide on-chip storage for packet queues and timing relationships. The 220 user I/Os allow high-speed interfaces to be distributed across the device without relying entirely on external buffering. A practical design uses the block RAM for wide data paths and the logic fabric for control and header processing. Power and thermal analysis must account for simultaneous switching activity because a busy fabric can consume substantially more power than a lightly loaded configuration.
Recommandé
Video and Image Processing
The XC5VLX50-1FFG324I is appropriate for parallel image pipelines, pixel classification, and real-time preprocessing where multiple stages must operate at line or frame rates. Its 46,080 logic cells can balance pixel operations across parallel lanes, and the 1,769,472 block-RAM bits can hold line buffers, lookup tables, and intermediate frames. The 220 user I/Os provide connections to video capture devices, serializers, and memory. Clock-domain crossings require registered boundaries and carefully constrained timing to prevent metastability. Because video designs often switch many lanes simultaneously, PCB power distribution and thermal design should be evaluated for worst-case activity rather than average utilization.
Recommandé
DSP and Digital Signal Processing
The XC5VLX50-1FFG324I supports parallel filtering, correlation, modulation, and fixed-point arithmetic pipelines built around its 46,080 logic cells and dedicated Virtex-5 processing resources. Block RAM can provide coefficient storage, delay lines, and circular buffers, while the 220 user I/Os connect converters and digital interfaces. Engineers should map the data path to exploit parallel arithmetic and avoid routing critical delay chains through general interconnect. Fixed-point growth, pipeline latency, and clock-domain crossings must be planned early. The device's 1 V core supply also requires a low-noise supply arrangement and close decoupling to prevent logic errors in long arithmetic chains.
Recommandé
Test and Measurement Systems
The XC5VLX50-1FFG324I fits programmable test systems that must coordinate acquisition, pattern generation, timing control, and real-time analysis. Its 3,600 configurable logic blocks can run multiple acquisition channels and sequencing engines, while 1,769,472 block-RAM bits support deep capture and comparison buffers. The 220 user I/Os provide broad instrument and fixture connectivity, and the industrial grade supports operation outside consumer-only temperature environments. Clock jitter, output skew, and input threshold performance are often more important than raw logic count in a measurement instrument. Those requirements should be verified against the device's speed-grade specifications and the complete external analog and digital timing chain.
Recommandé
Aerospace and Defense Control Systems
The XC5VLX50-1FFG324I can support legacy aerospace, defense, and rugged embedded-control platforms that require deterministic programmable logic and extensive I/O. Its 46,080 cells permit fault-tolerant control, monitoring, and communication functions, while the 220 user I/Os support redundant interfaces and sensor acquisition. The industrial-temperature ordering suffix identifies the intended environmental class, but a finished system must undergo its own qualification for shock, vibration, temperature cycling, radiation, and long-term availability. Because this mature device is not automatically qualified for every aerospace procurement program, engineers should confirm program-specific requirements, documentation, sourcing controls, and screening criteria before integration.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour XC5VLX50-1FFG324I — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | XC5VLX50-1FFG324C | XC5VLX50-2FFG324C | XC5VLX50-1FF324I | XC5VLX50-1FF324C | XC5VLX50-1FFG324CES |
|---|---|---|---|---|---|---|
| Brand | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx |
| Package | 324-pin FCBGA (FFG324) | 324-pin FCBGA (FFG324) | 324-pin FCBGA (FFG324) | 324-pin FCBGA (FF324) | 324-pin FCBGA (FF324) | 324-pin FCBGA (FFG324) |
| FPGA Family | Virtex-5 LX | Virtex-5 LX | Virtex-5 LX | Virtex-5 LX | Virtex-5 LX | Virtex-5 LX |
| Logic Cells | 46,080 cells | 46,080 cells | 46,080 cells | 46,080 cells | 46,080 cells | 46,080 cells |
| Configurable Logic Blocks | 3,600 CLBs | 3,600 CLBs | 3,600 CLBs | 3,600 CLBs | 3,600 CLBs | 3,600 CLBs |
| Block RAM | 1,769,472 bits | 1,769,472 bits | 1,769,472 bits | 1,769,472 bits | 1,769,472 bits | 1,769,472 bits |
| User I/O Count | 220 I/Os | 220 I/Os | 220 I/Os | 220 I/Os | 220 I/Os | 220 I/Os |
| Process Technology | 65 nm CMOS | 65 nm CMOS | 65 nm CMOS | 65 nm CMOS | 65 nm CMOS | 65 nm CMOS |
| Core Supply Voltage | 1 V | 1 V | 1 V | 1 V | 1 V | 1 V |
| Speed Grade | -1 | -1 | -2 | -1 | -1 | -1 |
Principaux différenciateurs
- Exact -1 speed-grade alignment (vs XC5VLX50-2FFG324C)
- Identical 46,080-cell resource architecture (vs XC5VLX50-1FFG324CES)
- Matching 220-I/O interface capacity (vs XC5VLX50-1FF324I)
Notes de conception
The XC5VLX50-1FFG324I operates from a 1 V core supply, so core-rail distribution must maintain low impedance from the regulator to the device. Follow the manufacturer guidance for auxiliary rails, bypass capacitors, and power-supply sequencing. Place the smallest decoupling capacitors at the nearest package balls, use adequate via arrays at power and ground balls, and separate sensitive core routing from noisy external-interface return paths. Estimated power depends on utilization, clocking, I/O activity, and voltage; obtain the device power-estimation tool or characterization data rather than relying on a single nominal value.
Treat the 19 mm by 19 mm FFG324 footprint as a high-density assembly constraint. Verify every ball location against the exact device package file, including power, ground, configuration, clock, and user-I/O balls. Avoid placing tall components or heat sinks where they could interfere with the BGA assembly process. After soldering, inspect for missing or bridged balls with appropriate X-ray or cross-section methods because visual inspection alone cannot validate hidden interconnections. Plan the PCB around the ball-pitch requirements and include expansion for the complete manufacturing process.
Distribute clock, configuration, and high-fanout nets with deliberate topology, and keep sensitive configuration and serial-programming connections away from noisy interface regions. The configuration architecture relies on a correct startup and bitstream-loading chain; route programming signals for adequate signal integrity and provide deterministic reset behavior. Check unused I/O states and board-level test requirements before finalizing the layout. For multi-drop or externally exposed signals, use appropriate terminations and isolation rather than relying on FPGA internal configuration alone.
Estimate worst-case junction temperature from total device power, board thermal resistance, ambient temperature, and airflow. The large FCBGA can lose heat through many ground balls, so the PCB should use a dense ground-ball array and uninterrupted copper planes rather than isolated thermal vias. Estimated: junction temperature equals ambient temperature plus device power multiplied by the effective junction-to-ambient thermal resistance. Validate the estimate with a thermal model or board measurement because package construction, copper area, airflow, and adjacent heat sources materially affect the result.
Do not select a replacement from the device name alone. Virtex-5 LX orderings can share cell count, speed grade, and the 324-pin FCBGA format while differing in package suffix, commercial classification, or lead-free designation. Before substitution, compare the exact package-ball file, pin mapping, temperature grade, voltage requirements, configuration interface, and lifecycle status. Also verify that the replacement's bitstream and timing constraints remain acceptable; a matching cell count does not by itself prove PCB compatibility.
Informations de conformité
The I ordering suffix identifies an industrial temperature grade, not an AEC-Q100 qualification. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation for the exact ordering code.