XC6SLX45-L1FGG484C - Spartan-6 LX FPGA | AMD Xilinx
Référence : XC6SLX45-L1FGG484C ✓ ActifXC6SLX45-L1FGG484C Présentation
A field-programmable gate array is a semiconductor whose digital logic and interconnect can be configured after manufacture. An FPGA belongs to the broader programmable-logic hierarchy, alongside CPLDs and other programmable devices, while providing substantially greater parallelism and on-chip memory than a fixed-function controller. Spartan-6 devices combine that flexibility with relatively low system cost and a mature 45 nm process technology.
The principal device figures are 43,661 logic cells, 316 package I/O, 45 nm CMOS fabrication, and a 1 V core voltage. The -L1 suffix identifies the low-voltage, -1 performance designation within the Spartan-6 LX ordering system. Its 484-pin FBGA package supports high I/O density for boards that must route substantial parallel data, control signals, clocks, and serial interfaces while retaining the programmable resources needed for multi-channel logic.
Spartan-6 LX devices integrate programmable logic, block RAM, DSP resources, and dedicated I/O capability into one configurable device. This mixed resource model allows designers to implement parallel datapaths, control logic, protocol handling, and limited digital signal processing without requiring several separate devices. Because the device is programmable, one PCB design can support multiple product configurations when the pinout, power requirements, and timing constraints remain unchanged.
Typical uses include industrial automation, embedded control, communications interfaces, test equipment, video processing, sensor acquisition, and compact embedded systems. The 316 package I/O make the device appropriate for designs with several buses and substantial external memory. The -1 speed grade should be checked against the timing closure target because faster Spartan-6 speed grades are available for designs requiring greater clock performance.
PCB implementation requires careful treatment of the BGA footprint, power rails, decoupling, configuration access, clocking, and high-speed I/O return paths. Use the manufacturer package files to confirm every ball assignment and keep sensitive configuration, JTAG, clock, and I/O routing away from sources of excessive EMI. Apply the AMD Spartan-6 package pinout files when defining the land pattern and schematic symbol.
This page combines the verified device identity, package details, source links, compatible ordering variants, and practical FPGA design considerations in one engineering-focused reference. It helps distinguish speed, package, and temperature variants before a PCB footprint or configuration strategy is committed to production.
Alternatives de remplacement direct pour XC6SLX45-L1FGG484C — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec XC6SLX45-L1FGG484C (même facteur de forme et même empreinte) — différant par Package, Speed Grade, Block RAM, Process Technology, Family.
XC6SLX45-1LFGG484C
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
XC6SLX45-2FGG484C
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →XC6SLX45-2FGG484I
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →XC6SLX45-3FGG484C
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →XA6SLX45-3FGG484I
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
XC6SLX45-L1FGG484C Valeurs maximales et caractéristiques électriques
| Device Type | Spartan-6 LX field-programmable gate array |
| Logic Cell Count | 43,661 cells |
| Process Technology | 45 nm CMOS |
| Core Supply Voltage | 1 V |
| Package I/O Count | 316 I/O |
| Boîtier | 484-pin FGG BGA |
| Package Family | FBGA |
| Speed Grade | -1 |
| Low-Voltage Designation | L |
| Device Family | Spartan-6 LX |
| Programmable Logic Type | FPGA |
| Type de montage | Surface mount |
Guide de configuration des broches du XC6SLX45-L1FGG484C fbga
Configuration des broches du XC6SLX45-L1FGG484C (boîtier fbga). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour XC6SLX45-L1FGG484C.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
XC6SLX45-L1FGG484C convient pour 6 applications: Industrial Automation Controller, Communications Interface, Embedded Sensor Acquisition, Test and Measurement Equipment, Video and Image Processing, Embedded Control Platform.
Industrial Automation Controller
The XC6SLX45-L1FGG484C fits industrial automation controllers that need programmable logic for sequencing, machine-state evaluation, data conversion, and communications. Its 43,661 logic cells provide substantial parallel processing capability, while 316 package I/O leave room for digital field-bus connections, encoders, discrete sensors, actuator outputs, and supervisory control. The 1 V core and 45 nm CMOS implementation also place it in the established Spartan-6 LX low-voltage family. During implementation, confirm the -1 timing margin against the control-loop and communication timing requirements, and use the AMD Spartan-6 package pinout files to validate every BGA assignment.
Recommandé
Communications Interface
The XC6SLX45-L1FGG484C can support communications aggregation, protocol conversion, framing, and buffering when several independent datapaths must operate concurrently. Its 43,661 logic cells allow designers to combine transmit and receive state machines, FIFO-like storage, CRC processing, and interface adaptation within one programmable device. The 316 package I/O provide substantial connectivity for parallel buses, memory interfaces, clocks, and control signals. Validate serial-line rates, impedance, timing margins, clock topology, and I/O standards against the AMD datasheet, because nominal logic-cell count alone does not establish the achievable interface performance.
Recommandé
Embedded Sensor Acquisition
The XC6SLX45-L1FGG484C is suitable for multi-channel sensor-acquisition systems that must combine parallel sampling control, digital filtering, calibration, and data packaging. The 45 nm Spartan-6 LX device provides programmable logic alongside DSP and block-memory resources, allowing acquisition pipelines to be consolidated without a fixed sequence of separate digital components. Its 316 package I/O can accommodate sensor inputs, capture triggers, clocks, status signals, and downstream data buses. Engineers should budget I/O and memory utilization during architecture planning, then confirm the selected -1 grade closes timing with the intended clock frequency and acquisition-rate targets.
Recommandé
Test and Measurement Equipment
The XC6SLX45-L1FGG484C fits programmable test and measurement equipment requiring flexible sequencing, timing control, data capture, and numerous instrument-facing I/O. The 43,661 logic cells support parallel measurement channels and reusable control logic, while the 316 package I/O can connect converters, trigger signals, status lines, and communication interfaces. A single programmable device can simplify sequencing across multiple tests, but analog excitation, input bandwidth, output stability, and clock accuracy remain external system constraints. Validate the -1 grade against the instrument timing specification and use the manufacturer package files for the land pattern.
Recommandé
Video and Image Processing
The XC6SLX45-L1FGG484C can implement parallel video timing, pixel transport, color conversion, and preprocessing when the design requires configurable logic rather than a fixed accelerator. Its 43,661-cell Spartan-6 LX resource level and 316 package I/O provide enough connectivity to interface with memory and external video or control components. Parallel pipelines can improve throughput, although video timing, memory bandwidth, and external interface rates must be established before architecture selection. Check timing closure for the target pixel clock and review power, decoupling, and thermal conditions in the implementation tools.
Recommandé
Embedded Control Platform
The XC6SLX45-L1FGG484C is well suited to compact embedded platforms that combine control logic, peripheral adaptation, event handling, and programmable data paths. The 484-pin FGG BGA provides 316 package I/O for external memories, buses, and control peripherals, while the 43,661 logic cells allow a reusable hardware platform to serve multiple product variants. Its 1 V core operation requires a correctly designed multi-rail power architecture, and configuration storage or an external configuration source must be included in the system plan. Verify startup behavior, JTAG access, clock sources, and timing against the manufacturing configuration.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour XC6SLX45-L1FGG484C — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | XC6SLX45-1LFGG484C | XC6SLX45-2FGG484C | XC6SLX45-2FGG484I | XC6SLX45-3FGG484C | XA6SLX45-3FGG484I |
|---|---|---|---|---|---|---|
| Package | 484-pin FGG BGA | 484-pin FGG BGA | 484-pin FGG BGA | 484-pin FGG BGA | 484-pin FGG BGA | 484-pin FGG BGA |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Device Family | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX |
| Performance Grade | -1 | -1 | -2 | -2 | -3 | -3 |
| Ordering Suffix | L1FGG484C | 1LFGG484C | 2FGG484C | 2FGG484I | 3FGG484C | 3FGG484I |
Principaux différenciateurs
- Lower speed grade supports designs that do not require the margin of faster variants (vs XC6SLX45-3FGG484C)
- Retains the high-density 484-pin package and 316 package I/O (vs XC6SLX45-2CSG484C)
- Provides 43,661 logic cells in a mature 45 nm CMOS Spartan-6 LX implementation (vs XA6SLX45-3FGG484I)
- Commercial-grade ordering option provides a distinct supply choice from industrial suffix variants (vs XC6SLX45-2FGG484I)
Notes de conception
Use the AMD Spartan-6 package-device pinout files as the authority for every ball location, especially power, ground, configuration, clock, and dedicated I/O connections. The FGG484 BGA requires a land pattern with controlled solder-mask and paste behavior; verify the package drawing, PCB stack-up, via-in-pad allowance, and assembly process with the board fabricator. Do not derive the footprint from the unrelated CSG324-family listings.
Design the 1 V core rail and auxiliary I/O rails separately, following the manufacturer power-supply topology and sequencing requirements. Place decoupling capacitance at the appropriate power and ground balls with short, low-inductance paths, and verify transient requirements across the -1 timing corner. A BGA package can hide poor current distribution if plane connections and vias are not arranged carefully.
Route clocks and high-speed interfaces as controlled-impedance nets, with continuous return paths and minimal stubs through the BGA field. Validate external memory, source-synchronous, and differential interfaces against the selected I/O standard and package ball assignments. If timing margin on the -1 grade is marginal, evaluate a faster ordering variant rather than using uncontrolled timing changes.
A common design error is assuming that any XC6SLX45 FGG484 ordering code is interchangeable. Speed grade, low-voltage designation, commercial or industrial suffix, qualification, and lifecycle requirements can differ. Before substitution, compare the exact manufacturer ordering table, check configuration and power compatibility, rerun timing, and confirm that the replacement remains available for the product lifecycle.
Informations de conformité
No definitive compliance declaration for the exact XC6SLX45-L1FGG484C ordering code was present in the referenced product records. Check the current AMD environmental and product-compliance documentation before making a compliance claim.