XC7A100T-3FTG256E - 101440-Cell Artix-7 FPGA | AMD
Référence : XC7A100T-3FTG256E ✓ ActifXC7A100T-3FTG256E Présentation
An FPGA is a reconfigurable digital semiconductor whose logic, memory, and signal-processing resources can be programmed after manufacture. The Artix-7 family belongs to the broader 7-series FPGA hierarchy and combines programmable logic cells, DSP48 slices, block RAM, clock-management resources, and general-purpose I/O. These resources allow designers to implement parallel algorithms, control logic, protocol bridges, image pipelines, and interface controllers without relying on a fixed application-specific instruction set.
The XC7A100T provides 101,440 logic cells, 170 I/Os, and 28 nm process technology. Its -3 ordering designation identifies the performance grade, while the FTG256 suffix identifies the 256-ball TFBGA package. The E suffix denotes the extended commercial temperature option. These characteristics place the device above smaller Artix-7 members in fabric capacity while maintaining the family's focus on performance per watt and cost-sensitive implementation.
The XC7A100T-3FTG256E architecture supports parallel data paths and substantial on-chip storage for demanding control and signal-processing workloads. Its 170 I/Os allow external memory, network interfaces, converters, sensors, and display or camera interfaces to connect directly to the programmable fabric. The 256-ball package also supports high-density PCB routing, but the fine-pitch BGA footprint requires careful fanout, ground-plane continuity, and assembly-process control.
Typical applications include industrial automation, test and measurement, wireless baseband equipment, high-definition video pipelines, embedded vision, and communications infrastructure. Its logic density is useful when several fixed-function controllers or parallel algorithm stages would otherwise require multiple devices. Separate companion FPGAs in the Artix-7 family can support related control, interface, or low-cost co-processing roles.
For a new design, verify the exact FTG256 land pattern, pin assignments, power rails, configuration interface, clocking scheme, and decoupling network against the manufacturer package files and device documentation. Device migration within the XC7A100T family can require a new bitstream even when the package remains unchanged, so timing constraints, I/O standards, and configuration memory must be reviewed before substitution.
This page organizes the key electrical, package, sourcing, and replacement information for the XC7A100T-3FTG256E, while adding application guidance and design considerations that support faster engineering review and sourcing decisions.
Alternatives de remplacement direct pour XC7A100T-3FTG256E — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec XC7A100T-3FTG256E (même facteur de forme et même empreinte) — différant par Package, Temperature Grade, Mounting Type, Logic Cells, Performance Grade.
XC7A100T-1FTG256E
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
XC7A100T-2FTG256E
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
XC7A100T-1FTG256I
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →XC7A100T-2FTG256I
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →XC7A100T-1FTG256C
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →XC7A100T-3FTG256E Valeurs maximales et caractéristiques électriques
| Device Type | Artix-7 Field Programmable Gate Array (FPGA) |
| Logic Cells | 101,440 cells |
| User I/O | 170 I/Os |
| Process Technology | 28 nm |
| Performance Grade | -3 |
| Boîtier | 256-ball TFBGA (FTG256) |
| Package Type | LBGA |
| Type de montage | Surface mount |
| Temperature Grade | Extended commercial (E) |
| Product Family | Artix-7 |
| Core Supply Voltage | 1 V |
Guide de configuration des broches du XC7A100T-3FTG256E lbga
Configuration des broches du XC7A100T-3FTG256E (boîtier lbga). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour XC7A100T-3FTG256E.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
XC7A100T-3FTG256E convient pour 6 applications: Industrial Automation and Motion Control, High-Definition Video Processing, Communications and Wireless Baseband, Test and Measurement Instrumentation, Embedded Vision and Image Sensors, Aerospace and Defense Support Electronics.
Industrial Automation and Motion Control
The XC7A100T-3FTG256E fits industrial controllers that combine machine sequencing, motor-control logic, communications, and sensor processing in one FPGA. Its 101,440 logic cells provide substantially more parallel capacity than a small control FPGA, while 170 user I/Os support encoder inputs, isolated digital interfaces, analog front ends, and field-bus transceivers. The -3 performance grade is useful when control loops must meet aggressive timing margins. Designers should reserve continuous ground connectivity, place decoupling at the power balls, and use the AMD package files to assign the 256-ball FTG256 footprint before routing high-speed control and communication interfaces.
Recommandé
High-Definition Video Processing
The XC7A100T-3FTG256E is well suited to real-time HD video pipelines that perform parallel pixel routing, color conversion, scaling, filtering, and interface bridging. Its 101,440 logic cells can host multiple concurrent processing stages, and the 170 available I/Os can connect directly to video serializers, deserializers, memory interfaces, and capture devices. Using the -3 grade provides additional timing margin for demanding pixel-clock paths. The design should establish deterministic clock domains, constrain video interfaces according to their standards, and provide local decoupling and uninterrupted return paths to minimize data corruption and jitter.
Recommandé
Communications and Wireless Baseband
The XC7A100T-3FTG256E can implement communications protocol handling, packet processing, symbol-rate conversion, and baseband filtering in a cost-sensitive FPGA. The 101,440-cell fabric supports parallel datapaths, while 170 I/Os allow connection to transceivers, memory, clocks, and network interfaces without relying exclusively on external processors. The -3 grade offers useful timing headroom for high-throughput datapaths. Designers must control clock skew, isolate noisy transceiver supplies, terminate interfaces correctly, and validate protocol timing with the exact speed grade selected for production.
Recommandé
Test and Measurement Instrumentation
The XC7A100T-3FTG256E fits modular test and measurement equipment requiring simultaneous acquisition, triggering, pattern generation, and analysis functions. Its 101,440 logic cells support parallel acquisition channels and real-time decision logic, while 170 I/Os provide connections to converters, memory, displays, and synchronization interfaces. The higher -3 performance grade can improve timing margin for high-speed sampling and trigger paths. Instrument designs should isolate analog and digital sections, use controlled clock distribution, and verify the FTG256 power, ground, and configuration connections against the manufacturer package documentation.
Recommandé
Embedded Vision and Image Sensors
The XC7A100T-3FTG256E supports embedded vision systems that must capture images, perform parallel pixel operations, and deliver results to another processor. Its 101,440 logic cells allow substantial pre-processing in the FPGA, including demosaicing, thresholding, filtering, and object-feature extraction, while 170 I/Os can support camera sensors, memory, and high-speed parallel links. The -3 grade provides additional timing margin for image pipelines. Signal-integrity measures should include short sensor connections, controlled impedance routing, clean reference clocks, and carefully placed decoupling around the 256-ball package.
Recommandé
Aerospace and Defense Support Electronics
The XC7A100T-3FTG256E can be evaluated for support functions in aerospace and defense systems, including data conditioning, command decoding, telemetry formatting, and fault logging. Its 101,440 logic cells and 170 I/Os allow several parallel functions to share a programmable device, reducing board area compared with multiple fixed controllers. The -3 grade supplies additional logic timing margin, but qualification and environmental suitability are not established solely by the ordering code. Engineers must review the exact device qualification, radiation, temperature, security, and procurement requirements before using it in a flight-critical design.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour XC7A100T-3FTG256E — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | XC7A100T-1FTG256E | XC7A100T-2FTG256E | XC7A100T-1FTG256I | XC7A100T-2FTG256I | XC7A100T-1FTG256C |
|---|---|---|---|---|---|---|
| Package | 256-ball TFBGA (FTG256) | 256-ball TFBGA (FTG256) | 256-ball TFBGA (FTG256) | 256-ball TFBGA (FTG256) | 256-ball TFBGA (FTG256) | 256-ball TFBGA (FTG256) |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Series | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| Logic Cells | 101,440 cells | 101,440 cells | 101,440 cells | 101,440 cells | 101,440 cells | 101,440 cells |
| User I/O | 170 I/Os | 170 I/Os | 170 I/Os | 170 I/Os | 170 I/Os | 170 I/Os |
| Performance Grade | -3 | -1 | -2 | -1 | -2 | -1 |
| Temperature Suffix | E - Extended Commercial | E - Extended Commercial | E - Extended Commercial | I - Industrial | I - Industrial | C - Commercial |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
| Core Supply Voltage | 1 V | 1 V | 1 V | 1 V | 1 V | 1 V |
| Bitstream Requirement After Change | Programmed for the selected device | New bitstream and timing closure required | New bitstream and timing closure required | New bitstream and timing closure required | New bitstream and timing closure required | New bitstream and timing closure required |
Principaux différenciateurs
- Higher performance grade within the same XC7A100T FTG256 family (vs XC7A100T-2FTG256E)
- Broader operating-temperature class than commercial alternatives (vs XC7A100T-1FTG256C)
- Maximum family speed grade for timing-sensitive designs (vs XC7A100T-1FTG256I)
Notes de conception
Treat the FTG256 footprint as a fine-pitch BGA layout rather than a generic land pattern. Use the AMD package drawing and pinout files to define ball locations, power and ground assignments, and component keepouts. Provide uninterrupted ground-plane coverage beneath the device, route high-speed interfaces with controlled impedance, and use short connections from the FPGA to its decoupling network. The 170 user I/Os do not imply that every available ball can be used as a general-purpose signal in every design.
Implement separate core and I/O power distribution according to the manufacturer power architecture. The indexed device information identifies a 1 V core supply, while the complete rail requirements and decoupling values must be confirmed in the device documentation. Place recommended bulk and high-frequency capacitors at their designated package balls, use very short power and ground loops, and plan power sequencing if multiple rails or external loads require controlled startup. Validate droop and ripple at the FPGA under maximum switching activity rather than relying on supply-nameplate values.
Estimate worst-case junction temperature from actual utilization, clock activity, I/O loading, ambient temperature, and the assembled PCB's heat-spreading area. The TFBGA relies heavily on thermal vias and PCB copper, so an exposed-pad assumption is not enough by itself. Distribute power across multiple balls as specified, add thermal-via structures beneath the device, and avoid placing heat sources or airflow obstructions directly over the package. Recheck thermal margin after clock, design-utilization, and board-layout changes.
Do not treat a similar XC7A100T ordering code as an automatic production substitution. Performance grade, temperature suffix, package, configuration, and device status can all affect the migration. Changing from -3 to -2 or -1 can invalidate timing margins, and changing the E temperature option to I or C can alter the permitted environmental envelope. Generate a new bitstream, rerun static timing, verify configuration memory behavior, and compare all used pins and power rails against the official package files.
Informations de conformité
The indexed product information does not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm the current declarations for the exact ordering code before production release.