XC7K410T-2FBG900C - 406,720-Cell Kintex-7 FPGA | AMD
Référence : XC7K410T-2FBG900C ✓ ActifXC7K410T-2FBG900C Présentation
A field-programmable gate array is a semiconductor device whose digital architecture can be configured after manufacture. The FPGA category sits above programmable logic devices and complex programmable logic devices, combining configurable logic blocks, programmable interconnect, memory resources, DSP resources, dedicated I/O, and clock-management circuitry. The Kintex-7 family therefore occupies the high-performance portion of the AMD 7-series FPGA portfolio.
The principal device characteristics include 406,720 logic cells, 28 nm process technology, a 1 V core voltage, and a 900-ball lidless FCBGA package. The device uses the -2 speed grade and commercial-temperature ordering code. Its large logic capacity supports parallel datapaths, protocol termination, high-speed interfaces, digital filtering, and control systems, while the 900-ball package supports substantially more I/O than smaller FPGA packages.
Kintex-7 devices integrate dedicated hardware for demanding signal-processing and connectivity workloads. Their architecture is suited to designs requiring high-speed serial connectivity, parallel transceiver I/O, substantial on-chip memory, and clocking. The package form factor creates a substantial pin-count routing challenge, so the PCB design must follow the AMD package pinout files, UG475, and the device-specific design guidance for power, decoupling, and ball assignment.
Typical uses include 10 Gigabit Ethernet and other networking equipment, server and storage acceleration, industrial video processing, high-speed test equipment, defense-oriented communications systems, and FPGA-based prototyping. For a new Kintex-7 design, engineers should confirm the required speed grade, operating-temperature range, package variant, configuration method, memory interfaces, transceivers, and board-level power budget before finalizing the bill of materials.
The most important design consideration is the FBG900 land pattern. This is a complex 900-ball package rather than a leaded component, so PCB escape routing, layer count, via construction, ball-pad dimensions, and assembly capability must be planned together. Decoupling and power distribution should follow the AMD guidance for the selected Kintex-7 device and package instead of relying on generic FPGA assumptions.
This page combines package, device, sourcing, and replacement information with practical migration guidance. It also distinguishes true FBG900 drop-in options from devices in different packages, helping engineers avoid a replacement that would require a new PCB footprint or additional design validation.
Alternatives de remplacement direct pour XC7K410T-2FBG900C — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec XC7K410T-2FBG900C (même facteur de forme et même empreinte) — différant par Device Type, Package.
XC7K410T-2FBG900I
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
XC7K410T-2FBG900E
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
XC7K410T-3FBG900C
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
XC7K410T-1FBG900C
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →XC7K410T-2FBG900M
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
XC7K410T-2FBG900C Valeurs maximales et caractéristiques électriques
| Device Type | Kintex-7 Field-Programmable Gate Array |
| Logic Cells | 406,720 cells |
| Process Technology | 28 nm |
| Core Supply Voltage | 1 V |
| Device Speed Grade | -2 |
| Ordering Temperature Code | C, commercial temperature grade |
| Package Type | 900-pin lidless FCBGA |
| Package Pin Count | 900 pins |
| Type de montage | Surface Mount |
| Architecture | Configurable logic, programmable interconnect, block RAM, DSP, clocking, and I/O resources |
Guide de configuration des broches du XC7K410T-2FBG900C 900 pins
Configuration des broches du XC7K410T-2FBG900C (boîtier 900 pins). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour XC7K410T-2FBG900C.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
XC7K410T-2FBG900C convient pour 6 applications: 10 Gigabit Ethernet Network Equipment, Industrial Video and Image Processing, Server and Storage Acceleration, High-Speed Test and Measurement, Aerospace and Defense Communications, FPGA-Based Prototyping and Digital Systems.
10 Gigabit Ethernet Network Equipment
The XC7K410T-2FBG900C fits 10 Gigabit Ethernet switches, routers, and line-card equipment because its 406,720 logic cells provide substantial capacity for packet processing, buffering, flow control, and system management. The Kintex-7 architecture supports high-speed connectivity designs, while the 900-ball FBG900 package exposes the resources needed by demanding line cards. Implementation should verify the exact transceiver count, supported line rates, reference clocks, and pin assignments for the selected FPGA. The -2 speed grade and 28 nm process position the device between lower-cost Kintex-7 grades and the highest-performance -3 option.
Recommandé
Industrial Video and Image Processing
The XC7K410T-2FBG900C is suitable for industrial imaging systems that combine parallel capture, real-time filtering, pixel transformation, and control logic. Its 406,720 logic cells can support multiple parallel datapaths, while dedicated FPGA resources can accelerate suitable filtering and arithmetic operations without forcing the design into a general-purpose processor pipeline. The commercial-temperature C version is appropriate when the enclosure remains within the specified commercial operating range. Use the FBG900 package data to route camera interfaces, memory, network links, and control signals, and complete timing analysis for every video-rate path.
Recommandé
Server and Storage Acceleration
The XC7K410T-2FBG900C can serve as a programmable accelerator in server, storage, compression, and data-processing systems. Its 406,720 logic cells allow designers to implement parallel pipelines, protocol state machines, data validation, and control functions within one FPGA package. The -2 grade offers a performance point suited to demanding timing paths, while the 1 V core architecture still requires careful rail planning and distributed decoupling. Board designers should reserve resources for memory interfaces and high-speed host connectivity, and must synchronize the PCB layout with the exact FBG900 package files.
Recommandé
High-Speed Test and Measurement
The XC7K410T-2FBG900C is appropriate for high-speed test, measurement, and instrumentation systems that require flexible sequencing, pattern generation, real-time analysis, and programmable control. The large logic population permits multiple test channels or sophisticated acquisition pipelines to coexist, and the 900-ball package supports a high pin count needed by dense fixtures and interfaces. Engineers should use the device's dedicated clocking and I/O resources according to the manufacturer guidance, account for acquisition timing in the clock plan, and validate signal-integrity performance across every high-speed interface used by the instrument.
Recommandé
Aerospace and Defense Communications
The XC7K410T-2FBG900C can support programmable communications and signal-processing functions in aerospace, defense, and other mission-oriented systems when the selected ordering grade satisfies the environmental and qualification requirements. Its 406,720 logic cells allow protocol engines, channel processing, security functions, and supervisory logic to share a single FPGA, while the -2 speed grade supports demanding timing. Designers must confirm the applicable temperature, reliability, radiation, and procurement requirements rather than assuming that the commercial C suffix is suitable. Package-level power integrity, derating, and configuration security also require dedicated review.
Recommandé
FPGA-Based Prototyping and Digital Systems
The XC7K410T-2FBG900C is well suited to FPGA prototyping because 406,720 logic cells provide enough design space for substantial control logic, interface logic, and complex state machines. It can host early software-hardware co-design experiments, protocol validation logic, and reusable subsystem prototypes before a more specialized implementation is selected. The commercial-temperature version supports ordinary laboratory environments, while the industrial ordering option is useful for enclosed prototypes subject to wider temperature variation. Engineers should select an I/O standard supported by each assigned bank, define pin constraints carefully, and reserve programming or configuration resources according to the selected startup method.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour XC7K410T-2FBG900C — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | XC7K410T-2FBG900I | XC7K410T-2FBG900E | XC7K410T-3FBG900C | XC7K410T-1FBG900C | XC7K410T-2FBG900M |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 900-pin lidless FCBGA | 900-pin lidless FCBGA | 900-pin lidless FCBGA | 900-pin lidless FCBGA | 900-pin lidless FCBGA | 900-pin lidless FCBGA |
| FPGA Family | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 |
| Logic Cells | 406,720 cells | 406,720 cells | 406,720 cells | 406,720 cells | 406,720 cells | 406,720 cells |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
| Core Supply Voltage | 1 V | 1 V | 1 V | 1 V | 1 V | 1 V |
| Speed Grade | -2 | -2 | -2 | -3 | -1 | -2 |
| Temperature or Qualification Code | C, commercial temperature grade | I, industrial temperature grade | E, extended-temperature ordering option | C, commercial temperature grade | C, commercial temperature grade | M, alternative temperature or qualification ordering option |
Principaux différenciateurs
- Commercial-temperature -2 option in the original target configuration (vs XC7K410T-2FBG900I)
- Higher speed grade is available without changing the PCB footprint (vs XC7K410T-3FBG900C)
- Lower-speed migration path preserves package and logic resources (vs XC7K410T-1FBG900C)
Notes de conception
Use the exact AMD FBG900 package files as the controlling source for pad geometry, ball assignment, and PCB escape routing. A 900-ball lidless FCBGA requires a carefully planned multilayer stack-up, short escape paths, adequate via-in-pad or microvia strategy, and assembly-compatible pad definitions. Do not adapt the PCB from a 676-ball Kintex-7 design because ball count, routing density, power distribution, and placement requirements are not interchangeable.
Plan the 1 V core rail and associated I/O and auxiliary rails from the manufacturer power-consumption tables before committing to regulators, inductors, and capacitors. Decoupling placement should follow the AMD recommended schematic and layout guidance, with each supply ball served through a compact, low-inductance path. Account for startup current, configuration activity, and the difference between typical and worst-case power when sizing the supply and thermal solution.
Assign the clock, high-speed serial interfaces, memory interfaces, and other timing-sensitive pins directly from the exact device and package files. Preserve continuous reference-plane returns beneath escape routes and avoid splitting planes under high-speed links. Review each selected I/O standard against VCCO bank requirements, and make pin constraints in the project match the physical ball assignment to prevent implementation errors.
Do not treat FBG900, FFG900, and FBG676 as interchangeable packages even when the underlying XC7K410T device is identical. Likewise, do not approve a speed- or temperature-grade substitution without rerunning timing and environmental analysis. Verify the complete ordering code, configuration method, package revision, PCB stack-up, and pin constraints before releasing the design or placing a production order.
Informations de conformité
The available product information does not establish the requested compliance status for the exact XC7K410T-2FBG900C ordering code. Confirm environmental, material, and automotive qualification requirements with AMD using the exact part number and procurement documentation.