AMD

XC7K410T-2FBG900C - 406,720-Cell Kintex-7 FPGA | AMD

MPN: XC7K410T-2FBG900C ✓ Nakahanda
1 V Vdss 900-pin lidless FCBGA Package -2 Speed
MOQ: 1 |

XC7K410T-2FBG900C Ulas

The AMD XC7K410T-2FBG900C is a Kintex-7 field-programmable gate array with 406,720 logic cells, 28 nm fabrication technology, a 1 V core supply, and a 900-pin lidless FCBGA package. It is designed for high-performance programmable logic, parallel processing, signal processing, networking, storage, and test-and-measurement systems requiring substantial logic density and high-speed I/O capability.

A field-programmable gate array is a semiconductor device whose digital architecture can be configured after manufacture. The FPGA category sits above programmable logic devices and complex programmable logic devices, combining configurable logic blocks, programmable interconnect, memory resources, DSP resources, dedicated I/O, and clock-management circuitry. The Kintex-7 family therefore occupies the high-performance portion of the AMD 7-series FPGA portfolio.

The principal device characteristics include 406,720 logic cells, 28 nm process technology, a 1 V core voltage, and a 900-ball lidless FCBGA package. The device uses the -2 speed grade and commercial-temperature ordering code. Its large logic capacity supports parallel datapaths, protocol termination, high-speed interfaces, digital filtering, and control systems, while the 900-ball package supports substantially more I/O than smaller FPGA packages.

Kintex-7 devices integrate dedicated hardware for demanding signal-processing and connectivity workloads. Their architecture is suited to designs requiring high-speed serial connectivity, parallel transceiver I/O, substantial on-chip memory, and clocking. The package form factor creates a substantial pin-count routing challenge, so the PCB design must follow the AMD package pinout files, UG475, and the device-specific design guidance for power, decoupling, and ball assignment.

Typical uses include 10 Gigabit Ethernet and other networking equipment, server and storage acceleration, industrial video processing, high-speed test equipment, defense-oriented communications systems, and FPGA-based prototyping. For a new Kintex-7 design, engineers should confirm the required speed grade, operating-temperature range, package variant, configuration method, memory interfaces, transceivers, and board-level power budget before finalizing the bill of materials.

The most important design consideration is the FBG900 land pattern. This is a complex 900-ball package rather than a leaded component, so PCB escape routing, layer count, via construction, ball-pad dimensions, and assembly capability must be planned together. Decoupling and power distribution should follow the AMD guidance for the selected Kintex-7 device and package instead of relying on generic FPGA assumptions.

This page combines package, device, sourcing, and replacement information with practical migration guidance. It also distinguishes true FBG900 drop-in options from devices in different packages, helping engineers avoid a replacement that would require a new PCB footprint or additional design validation.

Mga alternatibo na pwedeng ilagay na XC7K410T-2FBG900C — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok XC7K410T-2FBG900C (parehas na form factor at footprint) — pagkakaiba sa Device Type, Package.

AMD
Device Type: Kintex-7 FPGA
Package: FBG900, 900-ball FCBGA
Ikabit sa XC7K410T-2FBG900C →
AMD
Package: FBG900, 900-ball BGA
Ikabit sa XC7K410T-2FBG900C →

XC7K410T-2FBG900I

✅ Drop-In
📦 900-pin lidless FCBGA
Same 406,720-cell, 28 nm Kintex-7 architecture and -2 speed grade; temperature code changes from C commercial to I industrial, with no package or pin-count change.

📋 Alternatibo na Reference (hindi sa katalogo)

XC7K410T-2FBG900E

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 900-pin lidless FCBGA
Same 406,720-cell, 28 nm Kintex-7 architecture, -2 speed grade, and FBG900 footprint; E provides a different extended-temperature ordering option from C.

📋 Alternatibo na Reference (hindi sa katalogo)

XC7K410T-3FBG900C

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 900-pin lidless FCBGA
Same 406,720-cell, 28 nm Kintex-7 architecture and FBG900 footprint; speed grade changes from -2 to -3, providing a different timing and power-performance profile.

📋 Alternatibo na Reference (hindi sa katalogo)

XC7K410T-1FBG900C

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
AMD
📦 900-pin lidless FCBGA
Kintex-7 FPGA · 406,720 cells · 28,620 Kb · 500 I/O · 28 nm · -1 · C · FBG900, 900-ball FCBGA

Magkontak para sa presyo

Tingnan ang Datasheet →

XC7K410T-2FBG900M

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 900-pin lidless FCBGA
Same 406,720-cell, 28 nm Kintex-7 architecture, -2 speed grade, and FBG900 footprint; M denotes a different temperature or qualification ordering option from C.

📋 Alternatibo na Reference (hindi sa katalogo)

XC7K410T-2FBG900C Mga Pinakamataas na Rating at Electrical Characteristics

Device Type Kintex-7 Field-Programmable Gate Array
Logic Cells 406,720 cells
Process Technology 28 nm
Core Supply Voltage 1 V
Device Speed Grade -2
Ordering Temperature Code C, commercial temperature grade
Package Type 900-pin lidless FCBGA
Package Pin Count 900 pins
Uri ng Pagpapasok Surface Mount
Architecture Configurable logic, programmable interconnect, block RAM, DSP, clocking, and I/O resources

Gabay sa Pin Configuration ng XC7K410T-2FBG900C 900 pins

Pin configuration para sa XC7K410T-2FBG900C (900 pins package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.

Pinout diagram ng 900 pins package para sa XC7K410T-2FBG900C

Wala ng detalyadong pinout data na magagamit para sa XC7K410T-2FBG900C.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

XC7K410T-2FBG900C ay nararapat para sa 6 aplikasyons: 10 Gigabit Ethernet Network Equipment, Industrial Video and Image Processing, Server and Storage Acceleration, High-Speed Test and Measurement, Aerospace and Defense Communications, FPGA-Based Prototyping and Digital Systems.

🌐

10 Gigabit Ethernet Network Equipment

The XC7K410T-2FBG900C fits 10 Gigabit Ethernet switches, routers, and line-card equipment because its 406,720 logic cells provide substantial capacity for packet processing, buffering, flow control, and system management. The Kintex-7 architecture supports high-speed connectivity designs, while the 900-ball FBG900 package exposes the resources needed by demanding line cards. Implementation should verify the exact transceiver count, supported line rates, reference clocks, and pin assignments for the selected FPGA. The -2 speed grade and 28 nm process position the device between lower-cost Kintex-7 grades and the highest-performance -3 option.

🎥

Industrial Video and Image Processing

The XC7K410T-2FBG900C is suitable for industrial imaging systems that combine parallel capture, real-time filtering, pixel transformation, and control logic. Its 406,720 logic cells can support multiple parallel datapaths, while dedicated FPGA resources can accelerate suitable filtering and arithmetic operations without forcing the design into a general-purpose processor pipeline. The commercial-temperature C version is appropriate when the enclosure remains within the specified commercial operating range. Use the FBG900 package data to route camera interfaces, memory, network links, and control signals, and complete timing analysis for every video-rate path.

🖥️

Server and Storage Acceleration

The XC7K410T-2FBG900C can serve as a programmable accelerator in server, storage, compression, and data-processing systems. Its 406,720 logic cells allow designers to implement parallel pipelines, protocol state machines, data validation, and control functions within one FPGA package. The -2 grade offers a performance point suited to demanding timing paths, while the 1 V core architecture still requires careful rail planning and distributed decoupling. Board designers should reserve resources for memory interfaces and high-speed host connectivity, and must synchronize the PCB layout with the exact FBG900 package files.

🔧

High-Speed Test and Measurement

The XC7K410T-2FBG900C is appropriate for high-speed test, measurement, and instrumentation systems that require flexible sequencing, pattern generation, real-time analysis, and programmable control. The large logic population permits multiple test channels or sophisticated acquisition pipelines to coexist, and the 900-ball package supports a high pin count needed by dense fixtures and interfaces. Engineers should use the device's dedicated clocking and I/O resources according to the manufacturer guidance, account for acquisition timing in the clock plan, and validate signal-integrity performance across every high-speed interface used by the instrument.

✈️

Aerospace and Defense Communications

The XC7K410T-2FBG900C can support programmable communications and signal-processing functions in aerospace, defense, and other mission-oriented systems when the selected ordering grade satisfies the environmental and qualification requirements. Its 406,720 logic cells allow protocol engines, channel processing, security functions, and supervisory logic to share a single FPGA, while the -2 speed grade supports demanding timing. Designers must confirm the applicable temperature, reliability, radiation, and procurement requirements rather than assuming that the commercial C suffix is suitable. Package-level power integrity, derating, and configuration security also require dedicated review.

🧩

FPGA-Based Prototyping and Digital Systems

The XC7K410T-2FBG900C is well suited to FPGA prototyping because 406,720 logic cells provide enough design space for substantial control logic, interface logic, and complex state machines. It can host early software-hardware co-design experiments, protocol validation logic, and reusable subsystem prototypes before a more specialized implementation is selected. The commercial-temperature version supports ordinary laboratory environments, while the industrial ordering option is useful for enclosed prototypes subject to wider temperature variation. Engineers should select an I/O standard supported by each assigned bank, define pin constraints carefully, and reserve programming or configuration resources according to the selected startup method.

Buod ng mga Inirekomendang Produkto

XC7K410T-2FBG900I Same-package industrial-temperature option for deployed network equipment Ginagamit sa: 10 Gigabit Ethernet Network Equipment, Industrial Video and Image Processing, High-Speed Test and Measurement, FPGA-Based Prototyping and Digital Systems XC7K410T-3FBG900C Same-package higher-speed option for timing-constrained network designs Ginagamit sa: 10 Gigabit Ethernet Network Equipment, Server and Storage Acceleration, FPGA-Based Prototyping and Digital Systems XC7K410T-1FBG900C AMD Ginagamit sa: Industrial Video and Image Processing, High-Speed Test and Measurement XC7K410T-2FBG900E Same-package option for systems requiring an extended-temperature ordering grade Ginagamit sa: Server and Storage Acceleration, Aerospace and Defense Communications XC7K410T-2FBG900M Same-package alternative temperature or qualification ordering option Ginagamit sa: Aerospace and Defense Communications
What is the XC7K410T-2FBG900C?
The XC7K410T-2FBG900C is an AMD Kintex-7 FPGA with 406,720 logic cells, 28 nm process technology, a 1 V core supply, and a 900-pin lidless FCBGA package. According to the manufacturer product documentation, the -2 suffix denotes the performance speed grade, FBG900 identifies the package, and C denotes the commercial-temperature ordering option. The device is intended for high-density programmable logic, signal processing, networking, and test systems.
How many logic cells and I/O does the XC7K410T-2FBG900C have?
The XC7K410T-2FBG900C contains 406,720 logic cells and is packaged in a 900-pin lidless FCBGA. The exact target-specific user I/O count must be taken from the AMD package data because some published summaries describe the full ball count while others report only user-accessible I/O. Use the FBG900 package files and the device characterization tables when assigning ball locations and checking transceiver or power-bus conflicts.
Where can I download the XC7K410T-2FBG900C datasheet PDF?
The XC7K410T-2FBG900C datasheet can be downloaded from the AMD Kintex-7 datasheet PDF hosted for this exact ordering code. The manufacturer document describes the Kintex-7 architecture, speed grades, electrical characteristics, package information, and supported features. For PCB implementation, use the AMD Kintex-7 package pinout files together with UG475 because the FBG900 package assignment requires the exact 900-ball map.
Where can I find the XC7K410T-2FBG900C pinout and FBG900 package drawing?
The authoritative XC7K410T-2FBG900C pinout is distributed through the AMD Kintex-7 package-device pinout files, which provide ASCII and CSV package information as described by UG475. The 900-pin lidless FCBGA is too dense for a reliable generic diagram, so the package files should be used for PCB escape routing and ball-by-ball review. Keep the exact FBG900 revision synchronized with the device, PCB, and assembly documentation.
What can replace the XC7K410T-2FBG900C?
The closest drop-in choices are same-family XC7K410T devices that use the FBG900 package and retain the 406,720-cell, 28 nm Kintex-7 architecture. Speed- or temperature-grade changes can alter timing, power, and environmental requirements, so replacement approval should include timing analysis and thermal review. A device in FFG900, FBG676, or another package is not a physical drop-in replacement even when its logic capacity is identical.
Can XC7K410T-2FBG900I replace XC7K410T-2FBG900C?
Yes, XC7K410T-2FBG900I is a pin-compatible FBG900 replacement candidate for XC7K410T-2FBG900C because it retains the same Kintex-7 device, -2 speed grade, 900-ball package, and 406,720-cell architecture. The principal difference is the I ordering suffix, which identifies the industrial-temperature option. Confirm that the replacement meets the system temperature requirement and review the manufacturer characterization tables before production use.
Is XC7K410T-2FBG900C suitable for 10 Gigabit Ethernet equipment?
The XC7K410T-2FBG900C is suitable for 10 Gigabit Ethernet equipment because the Kintex-7 family supports high-speed connectivity and provides 406,720 logic cells for protocol logic, buffering, and system control. The specific transceiver count, supported data rates, reference-clock requirements, and I/O assignments depend on the exact Kintex-7 configuration. Validate those details in the AMD data sheet and the selected 10G Ethernet interface design.
How does XC7K410T-2FBG900C compare with XC7K410T-2FBG900I?
XC7K410T-2FBG900C and XC7K410T-2FBG900I share the Kintex-7 architecture, 406,720 logic cells, 28 nm process technology, -2 speed grade, and 900-ball lidless FCBGA package. Their key ordering difference is temperature grade: the C suffix identifies commercial temperature, while the I suffix identifies industrial temperature. Choose the C version for a commercial-temperature design and the I version when the system requires the wider industrial range.
When should I choose XC7K410T-2FBG900C over another Kintex-7 speed grade?
Choose XC7K410T-2FBG900C when the design requires the -2 performance grade, commercial-temperature operation, and the FBG900 footprint. A faster -3 grade may improve timing margin but can change power and thermal requirements, while slower -1 or -1L grades may reduce timing performance or static-power behavior. Select the grade by completing timing, power, reliability, and cost analysis rather than relying only on nominal performance.
Is there a cross-brand drop-in equivalent for XC7K410T-2FBG900C?
No verified cross-brand, pin-to-pin drop-in equivalent for the XC7K410T-2FBG900C was identified. A genuine replacement must preserve the 900-ball FBG900 land pattern, ball functions, power architecture, configuration interface, supported I/O, and speed-grade behavior. Parts with a different package or an independently designed FPGA architecture are not drop-in replacements; use the Request a Quote form on this page when a sourcing cross-check is required.
What are the key specifications of XC7K410T-2FBG900C that engineers should know?
The key device facts are 406,720 logic cells, 28 nm fabrication technology, a 1 V core supply, a -2 speed grade, and a 900-pin lidless FCBGA package. The device also belongs to the Kintex-7 high-performance FPGA family. These figures establish the device's logic capacity, performance class, power architecture, and PCB complexity, while exact I/O, block RAM, DSP, transceiver, and temperature limits should be confirmed in the manufacturer characterization tables.
Is XC7K410T-2FBG900C in stock?
Current stock should be confirmed through the Request a Quote form on this page. The XC7K410T-2FBG900C is a large 900-ball FPGA whose availability can vary with the exact ordering code, package, and production requirements. Provide the target quantity, date code requirements, and acceptable delivery schedule in the request. The form is also the appropriate route for current lead-time and allocation confirmation.
What is the price of XC7K410T-2FBG900C?
Current pricing for the XC7K410T-2FBG900C should be obtained through the Request a Quote form on this page because commercial terms can change with volume, allocation, date code, and packaging requirements. The structured pricing area on the page is designed to reflect the current quote result rather than a static catalog figure. Submit the required quantity and supply conditions to receive the applicable quotation.
How long is the lead time for XC7K410T-2FBG900C?
The current lead time for XC7K410T-2FBG900C should be confirmed through the Request a Quote form on this page. Lead time may depend on order quantity, factory allocation, component availability, and the required date-code window. Providing a forecast, target quantity, and required delivery date with the request allows the supply channel to return a more useful schedule than a generic availability statement.
Where can I buy XC7K410T-2FBG900C online?
Use the Request a Quote form on this page to request the XC7K410T-2FBG900C with your required quantity and delivery conditions. The quote process can account for exact ordering-code integrity, current allocation, date-code requirements, and packaging requirements. Because a 900-ball FPGA is a high-value, configuration-sensitive component, the requested commercial response should also identify the source and traceability information.

Impormasyon ng Talumpati sa Engineering for XC7K410T-2FBG900C — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose XC7K410T-2FBG900C when the design needs the Kintex-7 architecture, 406,720 logic cells, a -2 performance class, commercial-temperature operation, and the FBG900 footprint. Choose XC7K410T-2FBG900I when the same electrical performance is needed in an industrial-temperature environment. Select XC7K410T-2FBG900E or XC7K410T-2FBG900M only when their specific environmental or qualification ordering requirements are preferable and confirmed by the manufacturer documentation. XC7K410T-3FBG900C is appropriate when additional timing performance is valuable, while XC7K410T-1FBG900C can be considered when the design has sufficient timing margin and a lower performance class is acceptable. All listed choices retain the FBG900 footprint, but every replacement still requires timing, power, temperature, configuration, and PCB compatibility review before production release.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto XC7K410T-2FBG900I XC7K410T-2FBG900E XC7K410T-3FBG900C XC7K410T-1FBG900C XC7K410T-2FBG900M
Brand AMD AMD AMD AMD AMD AMD
Package 900-pin lidless FCBGA 900-pin lidless FCBGA 900-pin lidless FCBGA 900-pin lidless FCBGA 900-pin lidless FCBGA 900-pin lidless FCBGA
FPGA Family Kintex-7 Kintex-7 Kintex-7 Kintex-7 Kintex-7 Kintex-7
Logic Cells 406,720 cells 406,720 cells 406,720 cells 406,720 cells 406,720 cells 406,720 cells
Process Technology 28 nm 28 nm 28 nm 28 nm 28 nm 28 nm
Core Supply Voltage 1 V 1 V 1 V 1 V 1 V 1 V
Speed Grade -2 -2 -2 -3 -1 -2
Temperature or Qualification Code C, commercial temperature grade I, industrial temperature grade E, extended-temperature ordering option C, commercial temperature grade C, commercial temperature grade M, alternative temperature or qualification ordering option

Pangunahing mga Pagkakaiba

  • Commercial-temperature -2 option in the original target configuration (kumpara saXC7K410T-2FBG900I)
  • Higher speed grade is available without changing the PCB footprint (kumpara saXC7K410T-3FBG900C)
  • Lower-speed migration path preserves package and logic resources (kumpara saXC7K410T-1FBG900C)

Talaan ng Disenyo

Use the exact AMD FBG900 package files as the controlling source for pad geometry, ball assignment, and PCB escape routing. A 900-ball lidless FCBGA requires a carefully planned multilayer stack-up, short escape paths, adequate via-in-pad or microvia strategy, and assembly-compatible pad definitions. Do not adapt the PCB from a 676-ball Kintex-7 design because ball count, routing density, power distribution, and placement requirements are not interchangeable.

Plan the 1 V core rail and associated I/O and auxiliary rails from the manufacturer power-consumption tables before committing to regulators, inductors, and capacitors. Decoupling placement should follow the AMD recommended schematic and layout guidance, with each supply ball served through a compact, low-inductance path. Account for startup current, configuration activity, and the difference between typical and worst-case power when sizing the supply and thermal solution.

Assign the clock, high-speed serial interfaces, memory interfaces, and other timing-sensitive pins directly from the exact device and package files. Preserve continuous reference-plane returns beneath escape routes and avoid splitting planes under high-speed links. Review each selected I/O standard against VCCO bank requirements, and make pin constraints in the project match the physical ball assignment to prevent implementation errors.

Do not treat FBG900, FFG900, and FBG676 as interchangeable packages even when the underlying XC7K410T device is identical. Likewise, do not approve a speed- or temperature-grade substitution without rerunning timing and environmental analysis. Verify the complete ordering code, configuration method, package revision, PCB stack-up, and pin constraints before releasing the design or placing a production order.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The available product information does not establish the requested compliance status for the exact XC7K410T-2FBG900C ordering code. Confirm environmental, material, and automotive qualification requirements with AMD using the exact part number and procurement documentation.

Data napatotohanan sa: 2026-11-14 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

xc7k410t 2fbg900c xc7k410t 2ffg900i xc7k410t 2ffg676i xc7k410t 2fbg676i xc7k410t 1ffg900i xc7k410t datasheet xc7k410t 2fbg900i xc7k410t fpga xc7k410t ffg900 xc7k410t 1ffg900c XC7K410T-2FBG900C datasheet pdf XC7K410T-2FBG900C FBG900 pinout XC7K410T-2FBG900C drop-in replacement AMD XC7K410T-2FBG900C price AMD XC7K410T-2FBG900C stock

Mga kaugnay na Mga Komponente at mga Tuntunin

AMD Xilinx XC7K410T-2FBG900C XC7K410T-2FBG900I XC7K410T-2FBG900E XC7K410T-3FBG900C XC7K410T-1FBG900C XC7K410T-2FBG900M Kintex-7 FPGA field-programmable gate array programmable logic FPGA 28 nm process technology 406,720 logic cells 900-pin lidless FCBGA FCBGA package ball grid array surface-mount semiconductor 1 V core supply -2 speed grade 10 Gigabit Ethernet block RAM DSP resource UG475
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ