XC7Z012S-2CLG485I - 766MHz Zynq SoC | AMD
Référence : XC7Z012S-2CLG485I ✓ ActifXC7Z012S-2CLG485I Présentation
A Zynq-7000S SoC is a programmable system-on-chip that merges a hard processor subsystem with FPGA fabric in one device. The Cortex-A9 core executes operating-system-level software, control logic, and network protocols, while the Artix-7 fabric accelerates parallel algorithms and interfaces directly to external peripherals. This system-on-chip hierarchy combines an Arm Cortex-A9 processor, an FPGA, a programmable SoC, and a semiconductor into a single highly integrated architecture.
The device provides 55K logic cells, a 766 MHz processor operating point, and 130 I/O according to the AMD device documentation and product listings. The CLG485 package contains 485 balls in a 19 mm by 19 mm CSPBGA configuration. Its integrated SoC architecture reduces the number of discrete devices needed when a design requires both deterministic programmable logic and a conventional processor runtime.
The single Cortex-A9 core provides the software-processing side of the architecture, while the FPGA fabric supports parallel datapaths, protocol termination, custom accelerators, and time-critical I/O. CoreSight debug capabilities make the processor and programmable logic easier to bring up under a unified development flow. Exact memory-interface, transceiver, and configuration details should be selected from the complete AMD Zynq-7000 datasheet before schematic and PCB signoff.
Typical uses include industrial IoT gateways, motor-control systems, embedded vision, industrial networking, test equipment, and low-power edge processors. In an embedded-vision controller, the processor can manage image transport and control software while FPGA fabric handles pixel pipelines or sensor interfaces. In communications equipment, programmable logic can implement custom packet handling while the processor runs network services and supervisory code.
PCB design must account for the CSPBGA footprint, ball assignment, power rails, decoupling, configuration storage, and high-speed routing requirements. Follow the AMD package placement, pinout, and design-guideline documents exactly; validate differential pairs and length matching in the target stack-up. Commercial availability and lead time should be confirmed through the Request a Quote form on this page.
This product summary combines the verified AMD and distributor device identification with practical guidance on FPGA/SoC partitioning, package constraints, and design qualification. It is intended to accelerate component selection while keeping critical PCB and electrical decisions tied to AMD's authoritative package and datasheet documentation.
Alternatives de remplacement direct pour XC7Z012S-2CLG485I — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec XC7Z012S-2CLG485I (même facteur de forme et même empreinte) — différant par Operating Temperature Range, Processor Core, Mounting Type, Device Type, Package.
XC7Z012S-2CLG485E
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →XC7Z012S-1CLG485I
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →XC7Z012S-1CLG485E
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
XC7Z012S-1CLG485C
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →XC7Z012S-2CLG485C
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
XC7Z012S-2CLG485I Valeurs maximales et caractéristiques électriques
| Device Type | Zynq-7000S system-on-chip |
| Processor Core | Single Arm Cortex-A9 MPCore |
| Processor Maximum Frequency | 766 MHz |
| Debug Support | CoreSight |
| FPGA Family | Artix-7 |
| Logic Cells | 55K |
| User I/O | 130 |
| Package Type | 485-CSPBGA |
| Package Dimensions | 19 mm x 19 mm |
| Number of Package Balls | 485 |
| Type de montage | Surface mount |
| Plage de température de fonctionnement | -40 °C to +100 °C |
| Process Technology | 28 nm |
| Statut du cycle de vie | Active |
| Statut RoHS | RoHS3 compliant |
| Minimum Order Quantity | 1 |
| Manufacturer Lead Time | 16 weeks |
Guide de configuration des broches du XC7Z012S-2CLG485I 485
Configuration des broches du XC7Z012S-2CLG485I (boîtier 485). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour XC7Z012S-2CLG485I.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
XC7Z012S-2CLG485I convient pour 6 applications: Industrial IoT Gateway, Machine Vision Controller, Industrial Motor Control, Industrial Networking Equipment, Test and Measurement Equipment, Embedded Video Processing.
Industrial IoT Gateway
XC7Z012S-2CLG485I fits an industrial IoT gateway that must combine Linux-capable application processing with deterministic hardware interfaces. The 766 MHz Arm Cortex-A9 core can run networking services, data acquisition, protocol conversion, and supervisory software, while the 55K Artix-7 logic cells can implement custom serial interfaces or accelerate packet processing. Its 130 user I/O provide options for multiple industrial buses and status signals, while the -40 °C to +100 °C industrial range supports equipment deployed outside controlled room environments. The 19 mm by 19 mm CLG485 package also helps reduce board area compared with separate processor and FPGA implementations, although careful power, thermal, and signal-integrity planning remains essential.
Recommandé
Machine Vision Controller
XC7Z012S-2CLG485I is well suited to machine-vision controllers that divide sensor ingestion, image processing, and system control between hardware and software. FPGA fabric can implement deterministic pixel pipelines, trigger logic, or camera-interface functions, while the 766 MHz Cortex-A9 core handles image algorithms, buffering, networking, and operator interfaces. With 55K logic cells and 130 user I/O, the device provides substantial integration without requiring separate discrete devices for logic-heavy tasks. The CLG485 package needs careful ball-escape planning and multilayer PCB routing, and the design should reserve configuration storage, clocking, and high-speed memory resources according to the AMD device documentation before assigning image-processing blocks.
Recommandé
Industrial Motor Control
XC7Z012S-2CLG485I supports industrial motor-control systems that require flexible timing, deterministic logic, and supervisory software in one device. The Cortex-A9 processor can execute control algorithms, diagnostics, communications, and safety-administration tasks, while FPGA fabric can generate precise timing sequences, process encoder signals, or isolate time-critical control paths from operating-system jitter. The 55K logic-cell capacity and 130 user I/O allow multiple control and communication channels to be consolidated in a compact 19 mm by 19 mm CSPBGA package. Engineers must allocate FPGA resources carefully, design isolated power rails for sensitive analog sections, and validate timing against the selected clocking architecture. The industrial temperature rating supports equipment operating from -40 °C to +100 °C.
Recommandé
Industrial Networking Equipment
XC7Z012S-2CLG485I can consolidate protocol processing and network management in industrial networking equipment. The processor subsystem handles routing, configuration, management-plane software, and protocol services, while the FPGA fabric can accelerate packet classification, filtering, framing, or custom physical-layer functions. Integrating these functions in one Zynq-7000S device reduces the number of interconnects and may simplify synchronization compared with separate processor and FPGA components. The device's 130 user I/O provide flexible connectivity for multiple network interfaces and status channels, and its 766 MHz processor supports a responsive management plane. In practice, designers must separate I/O voltage domains, follow AMD high-speed routing rules, and confirm that the selected CLG485 power configuration meets processor and fabric requirements.
Recommandé
Test and Measurement Equipment
XC7Z012S-2CLG485I fits programmable test and measurement equipment where control software, acquisition logic, and data processing must operate together. The Cortex-A9 core can run the instrument-control application, graphical interface, calibration routines, and communication services, while FPGA fabric implements fast sampling, stimulus sequencing, protocol handling, or digital signal-processing chains. Its 55K logic cells provide useful parallel-processing capacity, and the 130 user I/O support multiple data, trigger, and synchronization channels. The industrial temperature range supports laboratory, factory, and field-test equipment. The CLG485 package demands careful escape routing, low-noise power distribution, and a thermal design that accounts for processor plus FPGA activity. Boundary, impedance, and clock-quality requirements should be validated using the complete AMD design guidance.
Recommandé
Embedded Video Processing
XC7Z012S-2CLG485I supports embedded video systems that benefit from hardware-assisted pipelines and a general-purpose processor. FPGA fabric can perform frame handling, color conversion, filtering, compression assist, or camera timing, while the 766 MHz Cortex-A9 core controls buffers, streams video to storage or network interfaces, and runs application software. Consolidating these functions in one 55K-logic-cell SoC can reduce board area and shorten data movement compared with a separate FPGA and processor arrangement. The 130 user I/O provide substantial connectivity for sensors, displays, storage, and communications, but external memory bandwidth must be evaluated against the selected architecture. Designers should use the official CLG485 placement diagram and confirm pin assignments for memory, clocks, configuration, and high-speed interfaces before layout release.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour XC7Z012S-2CLG485I — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | XC7Z012S-2CLG485E | XC7Z012S-1CLG485I | XC7Z012S-1CLG485E | XC7Z012S-1CLG485C | XC7Z012S-2CLG485C |
|---|---|---|---|---|---|---|
| Package | 485-CSPBGA, 19 mm x 19 mm | 485-CSPBGA, 19 mm x 19 mm | 485-CSPBGA, 19 mm x 19 mm | 485-CSPBGA, 19 mm x 19 mm | 485-CSPBGA, 19 mm x 19 mm | 485-CSPBGA, 19 mm x 19 mm |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Processor Configuration | Single Arm Cortex-A9 | Single Arm Cortex-A9 | Single Arm Cortex-A9 | Single Arm Cortex-A9 | Single Arm Cortex-A9 | Single Arm Cortex-A9 |
| Processor Speed Grade | -2, 766 MHz | -2, 766 MHz | -1, lower performance grade | -1, lower performance grade | -1, lower performance grade | -2, 766 MHz |
| Logic Cells | 55K | 55K | 55K | 55K | 55K | 55K |
| User I/O | 130 | 130 | 130 | 130 | 130 | 130 |
| Temperature Grade | Industrial, -40 °C to +100 °C | Extended temperature | Industrial, -40 °C to +100 °C | Extended temperature | Commercial temperature | Commercial temperature |
| FPGA Family | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| Debug Support | CoreSight | CoreSight | CoreSight | CoreSight | CoreSight | CoreSight |
Principaux différenciateurs
- Higher -2 processor operating point (vs XC7Z012S-1CLG485I)
- Industrial temperature qualification (vs XC7Z012S-2CLG485E)
- Same-package qualification with industrial temperature range (vs XC7Z012S-2CLG485C)
Notes de conception
Use the AMD XC7Z012-CLG485 package placement diagram as the authoritative land-pattern and ball-assignment reference. The 485-CSPBGA package is too dense for a generic BGA drawing, so verify every power, ground, configuration, clock, and high-speed escape route against the official package files before releasing the PCB artwork.
Partition the power design by processor and FPGA requirements rather than treating the SoC as a single unregulated supply. Follow AMD's recommended power topology, place decoupling capacitance at the associated CLG485 balls, and validate steady-state and transient current using the selected XC7Z012S speed grade and enabled FPGA resources.
Plan high-speed memory, clock, configuration, and programmable I/O routes in the PCB stack-up before assigning the remaining general-purpose I/O. Keep clock and configuration nets away from noisy interfaces, follow AMD length-matching and via guidance, and use the CLG485 package files to confirm that escape routing does not compromise signal integrity.
Informations de conformité
The industrial supply listing identifies the device as RoHS3 compliant. No AEC-Q100 qualification claim or additional REACH, lead-free, halogen-free, or conflict-minerals status was identified.