XC7Z012S-2CLG485I - 766MHz Zynq SoC | AMD
MPN: XC7Z012S-2CLG485I ✓ AktifXC7Z012S-2CLG485I Genel Bakış
A Zynq-7000S SoC is a programmable system-on-chip that merges a hard processor subsystem with FPGA fabric in one device. The Cortex-A9 core executes operating-system-level software, control logic, and network protocols, while the Artix-7 fabric accelerates parallel algorithms and interfaces directly to external peripherals. This system-on-chip hierarchy combines an Arm Cortex-A9 processor, an FPGA, a programmable SoC, and a semiconductor into a single highly integrated architecture.
The device provides 55K logic cells, a 766 MHz processor operating point, and 130 I/O according to the AMD device documentation and product listings. The CLG485 package contains 485 balls in a 19 mm by 19 mm CSPBGA configuration. Its integrated SoC architecture reduces the number of discrete devices needed when a design requires both deterministic programmable logic and a conventional processor runtime.
The single Cortex-A9 core provides the software-processing side of the architecture, while the FPGA fabric supports parallel datapaths, protocol termination, custom accelerators, and time-critical I/O. CoreSight debug capabilities make the processor and programmable logic easier to bring up under a unified development flow. Exact memory-interface, transceiver, and configuration details should be selected from the complete AMD Zynq-7000 datasheet before schematic and PCB signoff.
Typical uses include industrial IoT gateways, motor-control systems, embedded vision, industrial networking, test equipment, and low-power edge processors. In an embedded-vision controller, the processor can manage image transport and control software while FPGA fabric handles pixel pipelines or sensor interfaces. In communications equipment, programmable logic can implement custom packet handling while the processor runs network services and supervisory code.
PCB design must account for the CSPBGA footprint, ball assignment, power rails, decoupling, configuration storage, and high-speed routing requirements. Follow the AMD package placement, pinout, and design-guideline documents exactly; validate differential pairs and length matching in the target stack-up. Commercial availability and lead time should be confirmed through the Request a Quote form on this page.
This product summary combines the verified AMD and distributor device identification with practical guidance on FPGA/SoC partitioning, package constraints, and design qualification. It is intended to accelerate component selection while keeping critical PCB and electrical decisions tied to AMD's authoritative package and datasheet documentation.
Drop-in alternatifler için XC7Z012S-2CLG485I — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller XC7Z012S-2CLG485I (aynı form faktörü ve ayağa oturma) — farklı olan Operating Temperature Range, Processor Core, Mounting Type, Device Type, Package.
XC7Z012S-2CLG485E
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →XC7Z012S-1CLG485I
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →XC7Z012S-1CLG485E
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
XC7Z012S-1CLG485C
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →XC7Z012S-2CLG485C
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
XC7Z012S-2CLG485I Maksimum Değerlendirmeler & Elektriksel Özellikler
| Device Type | Zynq-7000S system-on-chip |
| Processor Core | Single Arm Cortex-A9 MPCore |
| Processor Maximum Frequency | 766 MHz |
| Debug Support | CoreSight |
| FPGA Family | Artix-7 |
| Logic Cells | 55K |
| User I/O | 130 |
| Package Type | 485-CSPBGA |
| Package Dimensions | 19 mm x 19 mm |
| Number of Package Balls | 485 |
| Montaj Türü | Surface mount |
| İşletim Sıcaklığı Aralığı | -40 °C to +100 °C |
| Process Technology | 28 nm |
| Yaşam Döngüsü Durumu | Active |
| RoHS Durumu | RoHS3 compliant |
| Minimum Order Quantity | 1 |
| Manufacturer Lead Time | 16 weeks |
XC7Z012S-2CLG485I 485 Pin Yapısı Kılavuzu
XC7Z012S-2CLG485I (485 paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: XC7Z012S-2CLG485I.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
XC7Z012S-2CLG485I için uygundur 6 uygulamas: Industrial IoT Gateway, Machine Vision Controller, Industrial Motor Control, Industrial Networking Equipment, Test and Measurement Equipment, Embedded Video Processing.
Industrial IoT Gateway
XC7Z012S-2CLG485I fits an industrial IoT gateway that must combine Linux-capable application processing with deterministic hardware interfaces. The 766 MHz Arm Cortex-A9 core can run networking services, data acquisition, protocol conversion, and supervisory software, while the 55K Artix-7 logic cells can implement custom serial interfaces or accelerate packet processing. Its 130 user I/O provide options for multiple industrial buses and status signals, while the -40 °C to +100 °C industrial range supports equipment deployed outside controlled room environments. The 19 mm by 19 mm CLG485 package also helps reduce board area compared with separate processor and FPGA implementations, although careful power, thermal, and signal-integrity planning remains essential.
Önerilen
Machine Vision Controller
XC7Z012S-2CLG485I is well suited to machine-vision controllers that divide sensor ingestion, image processing, and system control between hardware and software. FPGA fabric can implement deterministic pixel pipelines, trigger logic, or camera-interface functions, while the 766 MHz Cortex-A9 core handles image algorithms, buffering, networking, and operator interfaces. With 55K logic cells and 130 user I/O, the device provides substantial integration without requiring separate discrete devices for logic-heavy tasks. The CLG485 package needs careful ball-escape planning and multilayer PCB routing, and the design should reserve configuration storage, clocking, and high-speed memory resources according to the AMD device documentation before assigning image-processing blocks.
Önerilen
Industrial Motor Control
XC7Z012S-2CLG485I supports industrial motor-control systems that require flexible timing, deterministic logic, and supervisory software in one device. The Cortex-A9 processor can execute control algorithms, diagnostics, communications, and safety-administration tasks, while FPGA fabric can generate precise timing sequences, process encoder signals, or isolate time-critical control paths from operating-system jitter. The 55K logic-cell capacity and 130 user I/O allow multiple control and communication channels to be consolidated in a compact 19 mm by 19 mm CSPBGA package. Engineers must allocate FPGA resources carefully, design isolated power rails for sensitive analog sections, and validate timing against the selected clocking architecture. The industrial temperature rating supports equipment operating from -40 °C to +100 °C.
Önerilen
Industrial Networking Equipment
XC7Z012S-2CLG485I can consolidate protocol processing and network management in industrial networking equipment. The processor subsystem handles routing, configuration, management-plane software, and protocol services, while the FPGA fabric can accelerate packet classification, filtering, framing, or custom physical-layer functions. Integrating these functions in one Zynq-7000S device reduces the number of interconnects and may simplify synchronization compared with separate processor and FPGA components. The device's 130 user I/O provide flexible connectivity for multiple network interfaces and status channels, and its 766 MHz processor supports a responsive management plane. In practice, designers must separate I/O voltage domains, follow AMD high-speed routing rules, and confirm that the selected CLG485 power configuration meets processor and fabric requirements.
Önerilen
Test and Measurement Equipment
XC7Z012S-2CLG485I fits programmable test and measurement equipment where control software, acquisition logic, and data processing must operate together. The Cortex-A9 core can run the instrument-control application, graphical interface, calibration routines, and communication services, while FPGA fabric implements fast sampling, stimulus sequencing, protocol handling, or digital signal-processing chains. Its 55K logic cells provide useful parallel-processing capacity, and the 130 user I/O support multiple data, trigger, and synchronization channels. The industrial temperature range supports laboratory, factory, and field-test equipment. The CLG485 package demands careful escape routing, low-noise power distribution, and a thermal design that accounts for processor plus FPGA activity. Boundary, impedance, and clock-quality requirements should be validated using the complete AMD design guidance.
Önerilen
Embedded Video Processing
XC7Z012S-2CLG485I supports embedded video systems that benefit from hardware-assisted pipelines and a general-purpose processor. FPGA fabric can perform frame handling, color conversion, filtering, compression assist, or camera timing, while the 766 MHz Cortex-A9 core controls buffers, streams video to storage or network interfaces, and runs application software. Consolidating these functions in one 55K-logic-cell SoC can reduce board area and shorten data movement compared with a separate FPGA and processor arrangement. The 130 user I/O provide substantial connectivity for sensors, displays, storage, and communications, but external memory bandwidth must be evaluated against the selected architecture. Designers should use the official CLG485 placement diagram and confirm pin assignments for memory, clocks, configuration, and high-speed interfaces before layout release.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: XC7Z012S-2CLG485I — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | XC7Z012S-2CLG485E | XC7Z012S-1CLG485I | XC7Z012S-1CLG485E | XC7Z012S-1CLG485C | XC7Z012S-2CLG485C |
|---|---|---|---|---|---|---|
| Package | 485-CSPBGA, 19 mm x 19 mm | 485-CSPBGA, 19 mm x 19 mm | 485-CSPBGA, 19 mm x 19 mm | 485-CSPBGA, 19 mm x 19 mm | 485-CSPBGA, 19 mm x 19 mm | 485-CSPBGA, 19 mm x 19 mm |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Processor Configuration | Single Arm Cortex-A9 | Single Arm Cortex-A9 | Single Arm Cortex-A9 | Single Arm Cortex-A9 | Single Arm Cortex-A9 | Single Arm Cortex-A9 |
| Processor Speed Grade | -2, 766 MHz | -2, 766 MHz | -1, lower performance grade | -1, lower performance grade | -1, lower performance grade | -2, 766 MHz |
| Logic Cells | 55K | 55K | 55K | 55K | 55K | 55K |
| User I/O | 130 | 130 | 130 | 130 | 130 | 130 |
| Temperature Grade | Industrial, -40 °C to +100 °C | Extended temperature | Industrial, -40 °C to +100 °C | Extended temperature | Commercial temperature | Commercial temperature |
| FPGA Family | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| Debug Support | CoreSight | CoreSight | CoreSight | CoreSight | CoreSight | CoreSight |
Ana Farklılayıcılar
- Higher -2 processor operating point (karşılaştırma:XC7Z012S-1CLG485I)
- Industrial temperature qualification (karşılaştırma:XC7Z012S-2CLG485E)
- Same-package qualification with industrial temperature range (karşılaştırma:XC7Z012S-2CLG485C)
Tasarım Notları
Use the AMD XC7Z012-CLG485 package placement diagram as the authoritative land-pattern and ball-assignment reference. The 485-CSPBGA package is too dense for a generic BGA drawing, so verify every power, ground, configuration, clock, and high-speed escape route against the official package files before releasing the PCB artwork.
Partition the power design by processor and FPGA requirements rather than treating the SoC as a single unregulated supply. Follow AMD's recommended power topology, place decoupling capacitance at the associated CLG485 balls, and validate steady-state and transient current using the selected XC7Z012S speed grade and enabled FPGA resources.
Plan high-speed memory, clock, configuration, and programmable I/O routes in the PCB stack-up before assigning the remaining general-purpose I/O. Keep clock and configuration nets away from noisy interfaces, follow AMD length-matching and via guidance, and use the CLG485 package files to confirm that escape routing does not compromise signal integrity.
Uyumluluk Bilgisi
The industrial supply listing identifies the device as RoHS3 compliant. No AEC-Q100 qualification claim or additional REACH, lead-free, halogen-free, or conflict-minerals status was identified.