XC7Z030-2FFG676E - Dual Cortex-A9 Zynq-7000 SoC | AMD
Référence : XC7Z030-2FFG676E ✓ ActifXC7Z030-2FFG676E Présentation
A Zynq-7000 SoC belongs to the FPGA & CPLD category while also functioning as a heterogeneous microprocessor-plus-logic device. Its Arm processing subsystem executes operating systems, networking stacks, and control software, while the FPGA fabric implements parallel datapaths, custom interfaces, and real-time signal-processing functions. This combination creates a single-chip platform for systems that otherwise might require a separate processor and programmable logic device.
The XC7Z030-2FFG676E provides two Arm Cortex-A9 MPCore processors, 125K Kintex-7 logic cells, and an 800 MHz operating clock. Its programmable architecture allows designers to partition workloads between software and hardware. CoreSight support provides integrated debug visibility, while the broad fabric can accelerate functions such as video processing, packet handling, sensor fusion, control loops, and custom peripheral bridging without requiring a discrete FPGA.
The FFG676 package provides 676 ball-grid contacts on a 27 x 27 mm square substrate and supports the compact board density required by industrial, communications, aerospace, and embedded-compute systems. Device-specific electrical characteristics, power rails, memory interfaces, and configuration limits must be implemented according to the AMD Zynq-7000 data sheet. Because the FCBGA package contains many power, ground, high-speed, and configuration balls, PCB escape routing, layer transitions, and thermal management require careful implementation.
Typical applications include industrial automation controllers, industrial Ethernet and network equipment, embedded vision systems, communications infrastructure, test and measurement platforms, and high-performance embedded Linux products. The Arm subsystem is appropriate for control-plane software, while FPGA resources can accelerate parallel data movement or implement deterministic hardware functions beside the processor.
A sound design begins with the AMD package pinout file and the Zynq-7000 data sheet, then validates power sequencing, configuration interfaces, memory topology, clocking, and differential I/O against the selected board stack-up. Because this device combines software execution with high-speed programmable logic, thermal design, signal integrity, and embedded software bring-up should be planned together rather than treated as independent tasks.
This product overview consolidates the exact device identity, package characteristics, processor and logic resources, alternative-part constraints, and practical implementation considerations needed for initial design selection. It also distinguishes verified catalog attributes from engineering details engineers must confirm in the family documentation and their specific reference design.
Alternatives de remplacement direct pour XC7Z030-2FFG676E — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec XC7Z030-2FFG676E (même facteur de forme et même empreinte) — différant par Device Type, Processor Core, Mounting Type, Package, Package Type.
XC7Z030-1FFG676E
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
XC7Z030-3FFG676E
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →XC7Z030-2FFG676I
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →XC7Z030-1FFG676I
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →XC7Z030-3FFG676I
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
XC7Z030-2FFG676E Valeurs maximales et caractéristiques électriques
| Device Type | Zynq-7000 programmable system-on-chip |
| Processor Core | Dual-core Arm Cortex-A9 MPCore |
| Processor Clock | 800 MHz |
| FPGA Family | Kintex-7 |
| Logic Cells | 125K |
| Debug Support | CoreSight |
| Boîtier | 676-ball FCBGA, 27 x 27 mm |
| Terminal Count | 676 balls |
| Package Shape | Square |
| Package Code | S-PBGA-B676 |
| Technology | CMOS |
| Plage de température de fonctionnement | 0 °C to 100 °C |
| Core Supply Voltage | 0.95 V to 1.05 V |
| Programmable Architecture | Arm Cortex-A9 processing subsystem with Kintex-7 programmable logic |
Guide de configuration des broches du XC7Z030-2FFG676E s-pbga-b676
Configuration des broches du XC7Z030-2FFG676E (boîtier s-pbga-b676). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour XC7Z030-2FFG676E.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
XC7Z030-2FFG676E convient pour 6 applications: Industrial Automation Controller, Industrial Networking Equipment, Embedded Vision Processing, Communications Infrastructure, Test and Measurement Equipment, Aerospace and Defense Control.
Industrial Automation Controller
The XC7Z030-2FFG676E fits industrial automation controllers that need a high-level operating system alongside deterministic hardware functions. Its dual Arm Cortex-A9 configuration provides software execution capability, while the 125K-cell Kintex-7 fabric can implement machine-vision preprocessing, motion-control interfaces, or specialized I/O logic. The 800 MHz processor configuration supports responsive control software without requiring a separate programmable-logic device. A practical design places the SoC between isolated industrial interfaces and network processors, using FPGA resources for time-critical acquisition and the Arm subsystem for configuration, networking, and supervisory functions.
Recommandé
Industrial Networking Equipment
The XC7Z030-2FFG676E is suitable for protocol-heavy networking equipment where software flexibility and hardware throughput must coexist. The Arm Cortex-A9 MPCore subsystem can run control software, management daemons, or an embedded network stack, while the Kintex-7 fabric can accelerate packet classification, traffic shaping, or custom interfaces. Its 125K logic cells provide parallel hardware alongside an 800 MHz processor configuration. In a typical implementation, the FPGA fabric handles deterministic data movement and the processor manages control-plane functions, reducing the need for separate programmable logic and simplifying the board-level architecture.
Recommandé
Embedded Vision Processing
The XC7Z030-2FFG676E supports embedded vision systems that divide image processing between programmable logic and software. The 125K Kintex-7 logic cells can accelerate pixel transport, filtering, thresholding, or fixed-function preprocessing, while the dual Arm Cortex-A9 subsystem runs higher-level control, networking, and user-facing software. The 800 MHz processor configuration helps coordinate acquisition and system services. A typical camera-processing board routes image data into FPGA logic for parallel operations, then transfers reduced or tagged data to the processor for recognition, storage, or network transmission.
Recommandé
Communications Infrastructure
The XC7Z030-2FFG676E can be used in communications infrastructure requiring programmable throughput and embedded software integration. Its Arm subsystem is suited to protocol management and configuration, while the 125K-cell Kintex-7 fabric can implement custom packet handling, framing, or interface conversion. The processor configuration reaches 800 MHz, allowing meaningful software processing beside hardware pipelines. In a typical design, FPGA logic manages sustained data traffic and the processor handles control, diagnostics, and network management, creating a compact alternative to a processor-plus-FPGA board.
Recommandé
Test and Measurement Equipment
The XC7Z030-2FFG676E is appropriate for test and measurement products that combine instrument control, data processing, and hardware acquisition. The dual-core Arm Cortex-A9 configuration can execute control software, while the programmable Kintex-7 fabric can implement parallel data capture, correlation, filtering, or waveform processing. The 125K available logic cells allow dedicated measurement pipelines beside the processor rather than forcing every operation through software. A practical instrument may use the FPGA fabric for continuous acquisition and real-time transformation while the processor performs calibration, storage, remote control, and graphical data presentation.
Recommandé
Aerospace and Defense Control
The XC7Z030-2FFG676E can support compact embedded-control systems that need programmable logic for deterministic I/O and an Arm processor for higher-level supervision. The 125K-cell Kintex-7 fabric can execute parallel control, monitoring, or data-validation functions, while the dual Cortex-A9 subsystem at up to 800 MHz handles sequencing and diagnostics. The 676-ball FCBGA package allows substantial integration on a dense board. Deployment in aerospace or defense equipment requires a separate program-specific qualification review; the documented E ordering code and family documentation do not alone establish every application-specific certification.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour XC7Z030-2FFG676E — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | XC7Z030-1FFG676E | XC7Z030-3FFG676E | XC7Z030-2FFG676I | XC7Z030-1FFG676I | XC7Z030-3FFG676I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 676-ball FCBGA (27 x 27 mm) | 676-ball FCBGA (27 x 27 mm) | 676-ball FCBGA (27 x 27 mm) | 676-ball FCBGA (27 x 27 mm) | 676-ball FCBGA (27 x 27 mm) | 676-ball FCBGA (27 x 27 mm) |
| Speed Grade | -2 | -1 | -3 | -2 | -1 | -3 |
| Temperature Ordering Code | E | E | E | I | I | I |
| Processor Configuration | Dual-core Arm Cortex-A9 MPCore, 800 MHz | Dual-core Arm Cortex-A9 MPCore; speed grade -1 | Dual-core Arm Cortex-A9 MPCore; speed grade -3 | Dual-core Arm Cortex-A9 MPCore, 800 MHz | Dual-core Arm Cortex-A9 MPCore; speed grade -1 | Dual-core Arm Cortex-A9 MPCore; speed grade -3 |
| FPGA Logic Cells | 125K | 125K | 125K | 125K | 125K | 125K |
| Programmable Logic Family | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 |
| Debug Capability | CoreSight | CoreSight | CoreSight | CoreSight | CoreSight | CoreSight |
Principaux différenciateurs
- Integrated dual-core processing and programmable logic (vs XC7Z035-2FFG676E)
- Direct speed-grade option in the same package (vs XC7Z030-3FFG676E)
- Temperature-code substitution option (vs XC7Z030-2FFG676I)
Notes de conception
Use the AMD XC7Z30-FBG676/FFG676 package placement diagram and the official package pinout files to assign every ball before routing. A 676-ball FCBGA on a 27 x 27 mm package requires deliberate escape routing, especially for configuration, memory, clocks, and high-speed interfaces. Preserve symmetry between supply and ground planes, minimize stub lengths, and validate layer transitions against the selected PCB stack-up.
Plan the complete power tree from the AMD data sheet rather than assuming that the 0.95 V to 1.05 V core range describes every internal rail. Define startup sequencing, voltage tolerances, decoupling, and load-current requirements for each supply. Verify configuration pins during reset and use local bulk and high-frequency decoupling where the recommended schematic and layout guidance call for it.
Estimate junction temperature from actual FPGA utilization, processor activity, board copper, enclosure airflow, and ambient temperature rather than processor clock alone. The Kintex-7 fabric and Arm subsystem can consume substantial dynamic power under real workloads. Use thermal simulation and the AMD power-estimation methodology during architecture selection, then verify the assembled board at worst-case activity and temperature.
Route memory, clocks, serial links, and other high-speed interfaces according to the AMD data sheet and board-design guidelines. Keep clock routing short, provide clean references, avoid unnecessary vias, and apply length matching only where required by the selected interface. Signal-integrity simulations should use the actual transceiver settings, connector or package escape geometry, and board material properties.
Do not treat a shared XC7Z030 package name as proof that every ordering suffix is interchangeable without qualification. Confirm speed grade, temperature grade, supported I/O standards, power limits, configuration behavior, and software-device identification. Also avoid using FCBGA placement drawings from another device family; ball assignments are device-specific even when the physical package dimensions match.
Informations de conformité
The catalog information identifies the device as CMOS technology but does not establish the requested compliance declarations. Program-specific qualification remains necessary for aerospace, defense, automotive, and other regulated deployments.