AMD

XC7Z030-2FFG676E - Dual Cortex-A9 Zynq-7000 SoC | AMD

MPN: XC7Z030-2FFG676E ✓ פעיל
0.95 V to 1.05 V Vdss 676-ball FCBGA, 27 x 27 mm Package 800 MHz Speed
כמות הזמנה מינימלית: 1 |

XC7Z030-2FFG676E סקירה

AMD/Xilinx XC7Z030-2FFG676E is a programmable system-on-chip combining a dual-core Arm Cortex-A9 processor with a Kintex-7 FPGA fabric, 125K logic cells, and an 800 MHz processor clock in a 676-ball FCBGA package measuring 27 x 27 mm. The device also integrates CoreSight debugging and programmable logic for embedded control, signal processing, and hardware acceleration.

A Zynq-7000 SoC belongs to the FPGA & CPLD category while also functioning as a heterogeneous microprocessor-plus-logic device. Its Arm processing subsystem executes operating systems, networking stacks, and control software, while the FPGA fabric implements parallel datapaths, custom interfaces, and real-time signal-processing functions. This combination creates a single-chip platform for systems that otherwise might require a separate processor and programmable logic device.

The XC7Z030-2FFG676E provides two Arm Cortex-A9 MPCore processors, 125K Kintex-7 logic cells, and an 800 MHz operating clock. Its programmable architecture allows designers to partition workloads between software and hardware. CoreSight support provides integrated debug visibility, while the broad fabric can accelerate functions such as video processing, packet handling, sensor fusion, control loops, and custom peripheral bridging without requiring a discrete FPGA.

The FFG676 package provides 676 ball-grid contacts on a 27 x 27 mm square substrate and supports the compact board density required by industrial, communications, aerospace, and embedded-compute systems. Device-specific electrical characteristics, power rails, memory interfaces, and configuration limits must be implemented according to the AMD Zynq-7000 data sheet. Because the FCBGA package contains many power, ground, high-speed, and configuration balls, PCB escape routing, layer transitions, and thermal management require careful implementation.

Typical applications include industrial automation controllers, industrial Ethernet and network equipment, embedded vision systems, communications infrastructure, test and measurement platforms, and high-performance embedded Linux products. The Arm subsystem is appropriate for control-plane software, while FPGA resources can accelerate parallel data movement or implement deterministic hardware functions beside the processor.

A sound design begins with the AMD package pinout file and the Zynq-7000 data sheet, then validates power sequencing, configuration interfaces, memory topology, clocking, and differential I/O against the selected board stack-up. Because this device combines software execution with high-speed programmable logic, thermal design, signal integrity, and embedded software bring-up should be planned together rather than treated as independent tasks.

This product overview consolidates the exact device identity, package characteristics, processor and logic resources, alternative-part constraints, and practical implementation considerations needed for initial design selection. It also distinguishes verified catalog attributes from engineering details engineers must confirm in the family documentation and their specific reference design.

חלופות תחליף ישיר עבור XC7Z030-2FFG676E — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם XC7Z030-2FFG676E (אותו גורם צורה וטביעת רגל) — שונים ב Device Type, Processor Core, Mounting Type, Package, Package Type.

AMD
Device Type: Zynq-7000 SoC with programmable logic and ARM processor
Processor Core: Dual ARM Cortex-A9 MPCore
Package Type: 676-FCBGA
השווה עם XC7Z030-2FFG676E →
AMD
Mounting Type: Surface-mount BGA
Package: 676-FCBGA
השווה עם XC7Z030-2FFG676E →
AMD
Device Type: Zynq-7000 Kintex-7 system-on-chip (SoC)
Processor Core: Dual ARM Cortex-A9 MPCore
Mounting Type: Surface mount, ball grid array
השווה עם XC7Z030-2FFG676E →

XC7Z030-1FFG676E

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 676-ball FCBGA (27 x 27 mm)
Processor speed grade is -1 versus -2 on the target, while the XC7Z030 FFG676 package and 125K logic-cell configuration remain the same.

📋 חלופה להתייחסות (לא בקטלוג)

XC7Z030-3FFG676E

✅ Drop-In ⚠️ מפרטים לא מאומתים
AMD
📦 676-ball FCBGA (27 x 27 mm)
Zynq-7000 Kintex-7 system-on-chip (SoC) · Dual ARM Cortex-A9 MPCore · 1 GHz · 125K logic cells · Kintex-7 · -3 · E extended-temperature designation · CoreSight

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

XC7Z030-2FFG676I

✅ Drop-In
AMD
📦 676-ball FCBGA (27 x 27 mm)
Zynq-7000 system-on-chip with dual-core Arm Cortex-A9 and Kintex-7 FPGA · Dual-core Arm Cortex-A9 MPCore · 800 MHz · 125K logic cells · Kintex-7 · Zynq-7000 · FPGA · CoreSight

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

XC7Z030-1FFG676I

✅ Drop-In ⚠️ מפרטים לא מאומתים
AMD
📦 676-ball FCBGA (27 x 27 mm)
Zynq-7000 SoC with programmable logic and ARM processor · Dual ARM Cortex-A9 MPCore · 2 cores · 667 MHz · Kintex-7 FPGA · 125K logic cells · CoreSight · 676-FCBGA

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

XC7Z030-3FFG676I

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 676-ball FCBGA (27 x 27 mm)
Uses the -3 speed grade and I temperature ordering code versus the target’s -2 grade and E ordering code, while retaining the XC7Z030 FFG676 package.

📋 חלופה להתייחסות (לא בקטלוג)

XC7Z030-2FFG676E דירוגים מרביים ומאפיינים חשמליים

Device Type Zynq-7000 programmable system-on-chip
Processor Core Dual-core Arm Cortex-A9 MPCore
Processor Clock 800 MHz
FPGA Family Kintex-7
Logic Cells 125K
Debug Support CoreSight
מארז 676-ball FCBGA, 27 x 27 mm
Terminal Count 676 balls
Package Shape Square
Package Code S-PBGA-B676
Technology CMOS
טווח טמפרטורת פעולה 0 °C to 100 °C
Core Supply Voltage 0.95 V to 1.05 V
Programmable Architecture Arm Cortex-A9 processing subsystem with Kintex-7 programmable logic

מדריך תצורת פינים של XC7Z030-2FFG676E s-pbga-b676

תצורת פינים עבור XC7Z030-2FFG676E (מארזת s-pbga-b676). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת s-pbga-b676 עבור XC7Z030-2FFG676E

אין נתוני פריסת פינים מפורטים עבור XC7Z030-2FFG676E.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

XC7Z030-2FFG676E מתאים עבור 6 יישוםs: Industrial Automation Controller, Industrial Networking Equipment, Embedded Vision Processing, Communications Infrastructure, Test and Measurement Equipment, Aerospace and Defense Control.

🏭

Industrial Automation Controller

The XC7Z030-2FFG676E fits industrial automation controllers that need a high-level operating system alongside deterministic hardware functions. Its dual Arm Cortex-A9 configuration provides software execution capability, while the 125K-cell Kintex-7 fabric can implement machine-vision preprocessing, motion-control interfaces, or specialized I/O logic. The 800 MHz processor configuration supports responsive control software without requiring a separate programmable-logic device. A practical design places the SoC between isolated industrial interfaces and network processors, using FPGA resources for time-critical acquisition and the Arm subsystem for configuration, networking, and supervisory functions.

🌐

Industrial Networking Equipment

The XC7Z030-2FFG676E is suitable for protocol-heavy networking equipment where software flexibility and hardware throughput must coexist. The Arm Cortex-A9 MPCore subsystem can run control software, management daemons, or an embedded network stack, while the Kintex-7 fabric can accelerate packet classification, traffic shaping, or custom interfaces. Its 125K logic cells provide parallel hardware alongside an 800 MHz processor configuration. In a typical implementation, the FPGA fabric handles deterministic data movement and the processor manages control-plane functions, reducing the need for separate programmable logic and simplifying the board-level architecture.

📷

Embedded Vision Processing

The XC7Z030-2FFG676E supports embedded vision systems that divide image processing between programmable logic and software. The 125K Kintex-7 logic cells can accelerate pixel transport, filtering, thresholding, or fixed-function preprocessing, while the dual Arm Cortex-A9 subsystem runs higher-level control, networking, and user-facing software. The 800 MHz processor configuration helps coordinate acquisition and system services. A typical camera-processing board routes image data into FPGA logic for parallel operations, then transfers reduced or tagged data to the processor for recognition, storage, or network transmission.

🌐

Communications Infrastructure

The XC7Z030-2FFG676E can be used in communications infrastructure requiring programmable throughput and embedded software integration. Its Arm subsystem is suited to protocol management and configuration, while the 125K-cell Kintex-7 fabric can implement custom packet handling, framing, or interface conversion. The processor configuration reaches 800 MHz, allowing meaningful software processing beside hardware pipelines. In a typical design, FPGA logic manages sustained data traffic and the processor handles control, diagnostics, and network management, creating a compact alternative to a processor-plus-FPGA board.

🖥️

Test and Measurement Equipment

The XC7Z030-2FFG676E is appropriate for test and measurement products that combine instrument control, data processing, and hardware acquisition. The dual-core Arm Cortex-A9 configuration can execute control software, while the programmable Kintex-7 fabric can implement parallel data capture, correlation, filtering, or waveform processing. The 125K available logic cells allow dedicated measurement pipelines beside the processor rather than forcing every operation through software. A practical instrument may use the FPGA fabric for continuous acquisition and real-time transformation while the processor performs calibration, storage, remote control, and graphical data presentation.

✈️

Aerospace and Defense Control

The XC7Z030-2FFG676E can support compact embedded-control systems that need programmable logic for deterministic I/O and an Arm processor for higher-level supervision. The 125K-cell Kintex-7 fabric can execute parallel control, monitoring, or data-validation functions, while the dual Cortex-A9 subsystem at up to 800 MHz handles sequencing and diagnostics. The 676-ball FCBGA package allows substantial integration on a dense board. Deployment in aerospace or defense equipment requires a separate program-specific qualification review; the documented E ordering code and family documentation do not alone establish every application-specific certification.

What is the AMD XC7Z030-2FFG676E?
The AMD XC7Z030-2FFG676E is a Zynq-7000 programmable SoC combining two Arm Cortex-A9 MPCore processors with a 125K-cell Kintex-7 FPGA fabric. According to the AMD Zynq-7000 product documentation, the device operates at up to 800 MHz and is packaged in a 676-ball FCBGA measuring 27 x 27 mm. It is designed for embedded systems that need both conventional software processing and programmable hardware acceleration.
What are the key specifications of XC7Z030-2FFG676E?
The XC7Z030-2FFG676E provides a dual-core Arm Cortex-A9 MPCore subsystem, an 800 MHz processor clock, 125K Kintex-7 logic cells, CoreSight debug support, and a 676-ball FCBGA package. According to the AMD Zynq-7000 data sheet, the package occupies a 27 x 27 mm square footprint. These attributes make it suitable for Linux-capable embedded control, communications, industrial automation, and hardware-assisted signal-processing designs.
Where can I download the XC7Z030-2FFG676E datasheet PDF?
The official XC7Z030-2FFG676E data sheet is available through the AMD documentation link on this page, covering XC7Z030 and related Zynq-7000 devices. According to AMD, the document describes the device family covering XC7Z030, XC7Z035, XC7Z045, and XC7Z100 variants. Use the FFG676 package placement diagram and package pinout files for board-level ball assignments and escape-routing requirements.
Where can I find the XC7Z030-2FFG676E pinout?
The XC7Z030-2FFG676E pinout should be taken from the AMD Zynq-7000 package device pinout files and the XC7Z30-FBG676/FFG676 package placement diagram. According to AMD, the placement diagram identifies the package ball locations for the FFG676 device. Use those files rather than assigning connections from a generic BGA drawing because power, configuration, memory, and high-speed balls have device-specific functions.
Is XC7Z030-2FFG676E suitable for embedded Linux systems?
The XC7Z030-2FFG676E is suitable for embedded Linux because it integrates a dual-core Arm Cortex-A9 MPCore processing subsystem with programmable logic. According to the AMD Zynq-7000 documentation, the Arm subsystem operates at up to 800 MHz while the Kintex-7 fabric supplies 125K logic cells. A typical design uses the processor for the operating system and control software while offloading suitable datapaths to the FPGA fabric.
How does the XC7Z030-2FFG676E compare with XC7Z035-2FFG676E?
Both devices use the Zynq-7000 architecture and 676-ball FFG676 packaging, but the XC7Z035-2FFG676E belongs to a different Zynq model with a different mix of processing and programmable-logic resources. According to AMD’s Zynq-7000 family documentation, XC7Z030 and XC7Z035 are separate device variants. The XC7Z030 is identified with 125K logic cells and an 800 MHz Cortex-A9 configuration, so migration to XC7Z035 requires a complete resource and pin-level review.
When should I choose XC7Z030-2FFG676E over XC7Z045-2FFG676E?
Choose XC7Z030-2FFG676E when a design needs the Zynq-7000 combination of Arm software processing and Kintex-7 programmable logic but does not require the larger resources of the XC7Z045 variant. According to AMD’s family data sheet, XC7Z030 is specified with 125K logic cells and an 800 MHz processor configuration. XC7Z045 should be considered when its additional processing or logic resources are needed.
What is the best drop-in replacement for XC7Z030-2FFG676E?
The closest drop-in candidate is another XC7Z030 device using the identical FFG676 ball pattern, such as a different speed-grade or temperature-marking variant of XC7Z030-2FFG676E. AMD’s package placement resources cover the XC7Z30-FBG676 and FFG676 families, but each replacement still requires verification of speed grade, temperature grade, power behavior, and ordering code. A larger Zynq model is not automatically a drop-in replacement.
Can XC7Z030-3FFG676E replace XC7Z030-2FFG676E?
The XC7Z030-3FFG676E is a higher-speed grade in the same XC7Z030 FFG676 package family, so it can be a pin-compatible upgrade when its electrical, thermal, configuration, and software requirements remain acceptable. According to AMD’s Zynq-7000 documentation, the XC7Z030 is covered by the family data sheet. Verify the complete ordering information and device-speed constraints before using it as a production substitute.
Can XC7Z030-2FFG676I replace XC7Z030-2FFG676E?
The XC7Z030-2FFG676I uses the same XC7Z030 FFG676 package family and nominal 800 MHz processor configuration, making it a candidate for pin-compatible substitution. According to AMD’s family documentation, XC7Z030 devices are covered in the Zynq-7000 data sheet. Before replacing the E-marked device, confirm the exact operating-temperature grade, production qualification, and temperature-dependent limits for the installed system.
Where can I buy XC7Z030-2FFG676E and check its lead time?
Use the Request a Quote form on this page to request XC7Z030-2FFG676E availability, lead time, and order quantities. The AMD/Xilinx part is listed by the Mouser product result and by other catalog sources, while the verified listing also identifies the device as a 676-ball FCBGA Zynq-7000 SoC. A quotation request allows the exact suffix, quantity, and delivery requirements to be checked together.
What is the price of XC7Z030-2FFG676E?
Current commercial pricing for XC7Z030-2FFG676E should be requested through the Request a Quote form on this page because quotations can depend on quantity, packaging, delivery schedule, and market conditions. The verified manufacturer and distributor results identify the exact device and its 676-ball FFG676 package. Use the quote request to obtain a current unit quotation for the quantity actually required.
Is XC7Z030-2FFG676E in stock?
Stock status for XC7Z030-2FFG676E should be confirmed through the Request a Quote form on this page. The Mouser result identifies the exact AMD/Xilinx orderable MPN, while other catalog results include the same XC7Z030 family and package. Because FPGA availability can vary with lot, configuration, and order quantity, request confirmation for your exact suffix and delivery schedule.
What is the XC7Z030-2FFG676E operating temperature range?
The XC7Z030-2FFG676E catalog entry specifies a 0 °C to 100 °C operating range. According to the product listing, the device uses CMOS technology and is supplied in a 676-terminal grid-array package. For production qualification, confirm this range against the official AMD ordering information and the temperature-dependent electrical limits published in the Zynq-7000 family documentation.
What can replace the XC7Z030-2FFG676E?
A replacement should be selected from XC7Z030 devices that retain the FFG676 package and pin arrangement, such as XC7Z030-1FFG676E or XC7Z030-3FFG676E after checking operating limits. According to AMD’s XC7Z30 package placement resources, FFG676 is an established package family. Treat the ordering suffix, speed grade, temperature grade, power requirements, and software configuration as separate acceptance criteria.

נתוני עזר הנדסיים עבור XC7Z030-2FFG676E — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose XC7Z030-2FFG676E when an embedded system needs the Zynq-7000 combination of dual Arm Cortex-A9 processing, 125K Kintex-7 logic cells, and a 676-ball FCBGA without moving to a larger Zynq model. XC7Z035-2FFG676E is appropriate when additional processing or programmable-logic capacity is required, while XC7Z045-2FFG676E should be considered for substantially larger workloads. For drop-in sourcing within the XC7Z030 family, XC7Z030-3FFG676E offers a higher speed grade, and XC7Z030-2FFG676I changes the temperature ordering code while retaining the nominal processor and package configuration. Treat every substitution as an engineering change: confirm ball assignments, operating limits, configuration requirements, power, and the device identifier recognized by the embedded software before production release.

השוואה עם חלופות

פרמטר מוצר זה XC7Z030-1FFG676E XC7Z030-3FFG676E XC7Z030-2FFG676I XC7Z030-1FFG676I XC7Z030-3FFG676I
Brand AMD AMD AMD AMD AMD AMD
Package 676-ball FCBGA (27 x 27 mm) 676-ball FCBGA (27 x 27 mm) 676-ball FCBGA (27 x 27 mm) 676-ball FCBGA (27 x 27 mm) 676-ball FCBGA (27 x 27 mm) 676-ball FCBGA (27 x 27 mm)
Speed Grade -2 -1 -3 -2 -1 -3
Temperature Ordering Code E E E I I I
Processor Configuration Dual-core Arm Cortex-A9 MPCore, 800 MHz Dual-core Arm Cortex-A9 MPCore; speed grade -1 Dual-core Arm Cortex-A9 MPCore; speed grade -3 Dual-core Arm Cortex-A9 MPCore, 800 MHz Dual-core Arm Cortex-A9 MPCore; speed grade -1 Dual-core Arm Cortex-A9 MPCore; speed grade -3
FPGA Logic Cells 125K 125K 125K 125K 125K 125K
Programmable Logic Family Kintex-7 Kintex-7 Kintex-7 Kintex-7 Kintex-7 Kintex-7
Debug Capability CoreSight CoreSight CoreSight CoreSight CoreSight CoreSight

מבדילים עיקריים

  • Integrated dual-core processing and programmable logic (לעומתXC7Z035-2FFG676E)
  • Direct speed-grade option in the same package (לעומתXC7Z030-3FFG676E)
  • Temperature-code substitution option (לעומתXC7Z030-2FFG676I)

הערות תכנון

Use the AMD XC7Z30-FBG676/FFG676 package placement diagram and the official package pinout files to assign every ball before routing. A 676-ball FCBGA on a 27 x 27 mm package requires deliberate escape routing, especially for configuration, memory, clocks, and high-speed interfaces. Preserve symmetry between supply and ground planes, minimize stub lengths, and validate layer transitions against the selected PCB stack-up.

Plan the complete power tree from the AMD data sheet rather than assuming that the 0.95 V to 1.05 V core range describes every internal rail. Define startup sequencing, voltage tolerances, decoupling, and load-current requirements for each supply. Verify configuration pins during reset and use local bulk and high-frequency decoupling where the recommended schematic and layout guidance call for it.

Estimate junction temperature from actual FPGA utilization, processor activity, board copper, enclosure airflow, and ambient temperature rather than processor clock alone. The Kintex-7 fabric and Arm subsystem can consume substantial dynamic power under real workloads. Use thermal simulation and the AMD power-estimation methodology during architecture selection, then verify the assembled board at worst-case activity and temperature.

Route memory, clocks, serial links, and other high-speed interfaces according to the AMD data sheet and board-design guidelines. Keep clock routing short, provide clean references, avoid unnecessary vias, and apply length matching only where required by the selected interface. Signal-integrity simulations should use the actual transceiver settings, connector or package escape geometry, and board material properties.

Do not treat a shared XC7Z030 package name as proof that every ordering suffix is interchangeable without qualification. Confirm speed grade, temperature grade, supported I/O standards, power limits, configuration behavior, and software-device identification. Also avoid using FCBGA placement drawings from another device family; ball assignments are device-specific even when the physical package dimensions match.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The catalog information identifies the device as CMOS technology but does not establish the requested compliance declarations. Program-specific qualification remains necessary for aerospace, defense, automotive, and other regulated deployments.

הנתונים אומתו בתאריך: 2026-11-14 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

xc7z030 2ffg676i xc7z030 1ffg676i xc7z030 1fbg676i xc7z030 2fbg676i xc7z030 1sbg485i xc7z030 2sbg485i xc7z030 1sbg485c xc7z030 2fbg484i xc7z030 1fbg484i xc7z030 3ffg676e XC7Z030-2FFG676E datasheet XC7Z030-2FFG676E pinout XC7Z030-2FFG676E equivalent XC7Z030-2FFG676E replacement AMD XC7Z030-2FFG676E price

רכיבים ומונחים קשורים

AMD AMD/Xilinx XC7Z030-2FFG676E XC7Z030-1FFG676E XC7Z030-3FFG676E XC7Z030-2FFG676I XC7Z030-1FFG676I XC7Z030-3FFG676I XC7Z035-2FFG676E XC7Z045-2FFG676E Zynq-7000 system-on-chip SoC FPGA CPLD Kintex-7 Arm Cortex-A9 MPCore CoreSight programmable logic FCBGA 676-ball FCBGA embedded Linux industrial automation hardware acceleration signal processing
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר