AMD

XCKU040-3SFVA784E 468-I/O Kintex UltraScale FPGA | AMD

Référence : XCKU040-3SFVA784E ✓ Actif
784-ball FCBGA, 31 mm x 31 mm Package -3 Speed
MOQ : 1 |

XCKU040-3SFVA784E Présentation

AMD XCKU040-3SFVA784E is a Kintex UltraScale field-programmable gate array with 468 I/O, 53,025 logic cells, and a 21,606,000-gate implementation capacity, supplied in a 784-ball FCBGA package. It combines programmable logic, high-speed I/O, embedded memory, programmable clocking, and dedicated resources for demanding parallel-processing and signal-processing systems. The -3 designation identifies the device speed grade, while SFVA784 identifies its 784-ball package and pin arrangement.

A field-programmable gate array is a semiconductor device whose digital logic, interconnect, and I/O behavior are configured after manufacture. Within the semiconductor hierarchy, an FPGA belongs to programmable logic devices and provides a hardware-level alternative to implementing extensive functions in software. Kintex UltraScale devices combine substantial parallel logic capacity with high-performance fabric resources, making them suitable for demanding signal processing, data acquisition, communications, and embedded systems.

The XCKU040 device provides 468 user I/O and a 21,606,000-gate implementation capacity in one package. Its 784-ball FCBGA format supports dense, high-speed PCB layouts, while the 53,025 logic-cell figure identifies the logical resource scale of the selected family member. The -3 speed suffix supports performance-oriented designs where deterministic parallel operation and interface bandwidth are important. Configuration, clocking, power-management, and I/O implementation should follow the AMD UltraScale design guidance.

Kintex UltraScale devices integrate programmable logic with selectable I/O standards, clock-management resources, block RAM, DSP resources, and dedicated networking or accelerator blocks. This combination allows one device to consolidate functions that might otherwise require several discrete devices. Designers can assign interfaces according to system timing constraints, derive multiple internal clocks, and place data-processing pipelines in parallel rather than executing every operation sequentially.

Typical applications include high-speed data acquisition, industrial image processing, communications infrastructure, test and measurement systems, embedded control, and high-throughput digital signal processing. A designer can use the Kintex UltraScale fabric for parallel algorithms while assigning appropriate banks to memory, clocks, serial links, and external interfaces. Final resource allocation depends on the selected I/O standards, memory interface requirements, timing constraints, and device configuration.

The 784-ball FCBGA package requires careful PCB layout, power planning, decoupling, and thermal design. Follow the AMD package pinout files and UG575 guidance when assigning every ball, configuring the power rails, and routing high-speed interfaces. Validate signal integrity, power sequencing, and junction-temperature margins before releasing the PCB for fabrication.

This page combines the exact device identity and package information with practical guidance for FPGA resource planning, PCB implementation, lifecycle sourcing, and equivalent-part evaluation. It also distinguishes speed-grade and temperature-grade options so engineers can assess replacement risk before changing a production design.

Alternatives de remplacement direct pour XCKU040-3SFVA784E — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

XCKU040-1SFVA784E

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 784-BFBGA, FCCSP
Speed grade changes from -3 to -1, giving approximately one lower relative performance class while retaining the SFVA784 footprint and extended-temperature suffix

📋 Alternative de référence (hors catalogue)

XCKU040-2SFVA784E

✅ Remplacement direct ⚠️ Spécifications non vérifiées
AMD
📦 784-BFBGA, FCCSP
Kintex UltraScale FPGA · Kintex UltraScale · 530,000 cells · 21,606 Kb · 1,920 slices · 468 I/O · 20 nm · -2

Contactez-nous pour le prix

Voir la fiche technique →

XCKU040-1SFVA784I

✅ Remplacement direct
AMD
📦 784-BFBGA, FCCSP
Kintex UltraScale field-programmable gate array · 530,250 logic elements · 30,300 LABs/CLBs · 21,606,000 bits · 468 user I/O pins · 784-FCBGA, 784-BFBGA, FCCSP · Flip-chip ball grid array · 784 balls

Contactez-nous pour le prix

Voir la fiche technique →

XCKU040-2SFVA784I

✅ Remplacement direct ⚠️ Spécifications non vérifiées
AMD
📦 784-BFBGA, FCCSP
Kintex UltraScale FPGA · Kintex UltraScale · AMD · 20 nm · -2 · -3, -2, -1, and -1L · 468 I/O

Contactez-nous pour le prix

Voir la fiche technique →

XCKU040-3SFVA784I

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 784-BFBGA, FCCSP
The -3 speed grade is retained, but the temperature suffix changes from E to I, making the industrial-temperature ordering code a conditional substitute

📋 Alternative de référence (hors catalogue)

XCKU040-3SFVA784E Valeurs maximales et caractéristiques électriques

Device Type Kintex UltraScale field-programmable gate array
Logic Cells 53,025 logic cells
Gate Count 21,606,000 gates
User I/O Count 468 I/O
Boîtier 784-ball FCBGA, 31 mm x 31 mm
Package Code SFVA784
Terminal Count 784 terminals
Terminal Form Ball
Package Shape Square
Speed Grade -3
Temperature Grade Extended-temperature grade indicated by E suffix
Programmable Logic FPGA configurable logic and interconnect

Guide de configuration des broches du XCKU040-3SFVA784E square

Configuration des broches du XCKU040-3SFVA784E (boîtier square). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.

Schéma de brochage du boîtier square pour le XCKU040-3SFVA784E

Aucune donnée de brochage détaillée disponible pour XCKU040-3SFVA784E.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

XCKU040-3SFVA784E convient pour 6 applications: High-Speed Data Acquisition, Industrial Signal Processing, Communications Infrastructure, Test and Measurement Systems, Machine Vision and Image Processing, Embedded Control Platform.

📡

High-Speed Data Acquisition

XCKU040-3SFVA784E fits parallel data-acquisition systems requiring wide capture bandwidth, deterministic real-time processing, and multiple clock domains. Its 468 user I/O can support wide parallel buses, while the 53,025 logic cells provide capacity for acquisition pipelines, filtering, decimation, and buffer management. The -3 speed grade offers additional timing margin for demanding clock targets. Engineers must assign I/O standards to compatible package banks, derive clocks through AMD clocking resources, and confirm achievable input rates through board-level timing analysis and static timing analysis.

🏭

Industrial Signal Processing

The XCKU040-3SFVA784E is appropriate for industrial signal-processing equipment that combines sensor acquisition, digital filtering, and real-time control in one programmable device. Its 21,606,000-gate implementation capacity and 53,025 logic cells support parallel arithmetic pipelines and control state machines, while 468 I/O simplify connection to sensors, converters, and actuators. The -3 grade favors higher clock frequencies and improved timing margin. For deployed equipment, verify the extended-temperature rating, isolate analog and digital sections, and use AMD timing and power constraints to ensure reliable operation.

🌐

Communications Infrastructure

XCKU040-3SFVA784E supports communications infrastructure functions requiring parallel packet processing, clock-domain crossing, high-speed memory interfaces, and extensive control logic. The programmable fabric can implement framing, filtering, queueing, and protocol adaptation, while dedicated I/O banks can be assigned to suitable external interfaces. The -3 speed grade helps improve timing closure on wide internal datapaths. Designers should use AMD clocking and I/O resources, validate SerDes or parallel-interface requirements for the selected speed grade, and complete signal-integrity analysis for board-level links.

🖥️

Test and Measurement Systems

The XCKU040-3SFVA784E is well suited to modular test and measurement equipment requiring concurrent acquisition, pattern generation, timing control, and data processing. Its 468 I/O provide broad instrument connectivity, while the large Kintex UltraScale logic capacity supports multiple parallel channels and sophisticated trigger logic. The -3 grade can improve margin in high-rate test paths, subject to the electrical limits of the selected I/O standard. System design should include calibrated clock distribution, controlled-impedance routing, bank-specific power planning, and AMD timing constraints for every major interface.

📺

Machine Vision and Image Processing

XCKU040-3SFVA784E can support machine-vision systems that combine high-bandwidth image capture with parallel filtering, feature extraction, and classification. The 468 user I/O allow connection to multiple sensors or image sensors, while 53,025 logic cells provide substantial parallel processing capacity. The -3 speed grade is useful when pipeline stages must operate at elevated clocks. Interface standards, supported resolutions, frame rates, and memory bandwidth must be evaluated together. Power and thermal analysis should account for sustained image-processing utilization and the dense 784-ball package.

🔧

Embedded Control Platform

The XCKU040-3SFVA784E can serve as the programmable control core in an embedded platform requiring deterministic timing, extensive peripherals, and configurable hardware logic. Developers can implement motor sequencing, safety interlocks, communications gateways, and real-time diagnostics in parallel within the FPGA fabric. Its 468 I/O provide flexible connectivity to sensors and actuators, while the -3 grade supports higher internal clock targets. Safety and reliability designs should separate critical functions, perform exhaustive state-machine verification, validate watchdog and fault paths, and confirm the exact temperature and lifecycle requirements.

What is XCKU040-3SFVA784E?
XCKU040-3SFVA784E is an AMD Kintex UltraScale FPGA with 468 user I/O, 53,025 logic cells, a 21,606,000-gate implementation capacity, and a 784-ball FCBGA package. The device is a -3 speed-grade part in the SFVA784 package. According to the AMD UltraScale FPGA Product Tables and Product Selection Guide, its programmable logic, memory, clocking, and I/O resources support high-performance parallel processing, data acquisition, communications, and embedded signal-processing designs.
How many I/O and logic cells does XCKU040-3SFVA784E have?
XCKU040-3SFVA784E provides 468 user I/O and 53,025 logic cells, with an implementation capacity of 21,606,000 gates. These figures place it in the Kintex UltraScale performance range and allow substantial parallel datapaths to be implemented in one device. I/O availability in a finished design can be lower than the device total when dedicated configuration, clock, power, memory, or other package balls are reserved according to the AMD package pinout.
Where can I download the XCKU040-3SFVA784E datasheet?
The official AMD UltraScale FPGA Product Tables and Product Selection Guide is available at https://docs.amd.com/v/u/en-US/ultrascale-fpga-product-selection-guide. It identifies the XCKU040 family and SFVA784 package selection information. For authoritative ball assignments, use AMD's UltraScale Package Device Pinout Files page together with UG575. Those documents show the complete package, power, configuration, clock, and user-I/O connections needed for PCB implementation.
Where is the XCKU040-3SFVA784E pinout located?
The XCKU040-3SFVA784E pinout is published through AMD's UltraScale Package Device Pinout Files and the UG575 package documentation. SFVA784 is a 784-ball FCBGA package, so the pin map must be assigned ball by ball rather than inferred from a simplified symbol. AMD also publishes downloadable ASCII TXT and CSV package files for use with board-design and pin-planning workflows. Match all package balls, power connections, and decoupling requirements against the selected device speed and temperature grade.
Is XCKU040-3SFVA784E suitable for high-speed data acquisition?
Yes, XCKU040-3SFVA784E is suitable for high-speed data acquisition when the selected I/O standard, clocking resources, and acquisition rate satisfy the system requirements. Its 468 user I/O and 53,025 logic cells allow wide parallel capture and substantial real-time processing. The -3 speed grade favors performance-oriented implementations. Actual input bandwidth is determined by the pin-capable I/O standards, board-level timing, memory interface performance, and the AMD timing constraints for the completed design.
What can replace XCKU040-3SFVA784E without changing the PCB footprint?
The closest identified drop-in candidate is XCKU040-1SFVA784I, which retains the XCKU040 device and 784-BFBGA footprint but changes speed and temperature grading. Pin-compatible alternatives in the same SFVA784 family can also include -1 and -2 speed-grade variants when their exact ordering codes are confirmed. A replacement must be checked for the required speed grade, temperature range, resource compatibility, configuration scheme, power behavior, and lifecycle status; a matching package alone does not establish functional interchangeability.
XCKU040-3SFVA784E vs XCKU040-1SFVA784I: which is better for industrial use?
XCKU040-1SFVA784I is generally the better candidate for an industrial-temperature requirement because its ordering code explicitly carries the industrial temperature suffix, while XCKU040-3SFVA784E carries the extended-temperature suffix. Both use the XCKU040 silicon family and 784-BFBGA package, but the speed grades differ: -3 versus -1. Choose XCKU040-3SFVA784E when maximum relative performance is more important, and select -1SFVA784I when the specified temperature grade and cost profile take priority.
When should I choose XCKU040-3SFVA784E over a lower-speed XCKU040?
Choose XCKU040-3SFVA784E when timing closure at the highest relative speed grade is required, such as demanding parallel-processing pipelines or high-throughput interfaces. Its -3 grade should provide better timing performance than -1 and -2 grades, allowing a higher clock target or more timing margin. A lower-speed grade may be preferable when the design meets timing comfortably, power or availability constraints dominate, or the operating-temperature grade is more important. Final selection must be based on static timing analysis.
Is XCKU040-3SFVA784E suitable for industrial control and communications equipment?
XCKU040-3SFVA784E is suitable for communications and industrial-control designs when its extended-temperature grade, I/O standards, and long-term availability satisfy the product requirements. Its 468 user I/O support parallel control, sensor, and data paths, while the programmable fabric can implement protocol logic, state machines, and real-time processing. Confirm the exact operating-temperature limits, EMC requirements, power-supply tolerances, and lifecycle commitments before using the device in a deployed industrial system.
Where can I buy XCKU040-3SFVA784E and check current stock?
Use the Request a Quote form on this page to request the current XCKU040-3SFVA784E price, stock position, and lead time. The form is the appropriate route for an exact-match quote because availability for large FPGA packages can vary by lot and authorized channel. Include your target quantity, date code requirements, shipment destination, and packaging needs when requesting the quote so the supply response can be matched to the production schedule.
What is the price of XCKU040-3SFVA784E?
The current XCKU040-3SFVA784E price is best obtained through the Request a Quote form on this page. Large Kintex UltraScale devices may be priced according to quantity, procurement volume, date-code availability, and supply status. Provide the required order quantity, acceptable date-code window, and shipment country. The quote process also allows the request to be matched to programmed-device, tray, or other authorized supply requirements without relying on a static market figure.
What is the lead time for XCKU040-3SFVA784E?
The current lead time for XCKU040-3SFVA784E should be confirmed through the Request a Quote form on this page. Lead time can vary with the number of pieces, allocation, date-code constraints, and the required delivery schedule. State the production demand and required ship date in the request. For supply-risk mitigation, consider asking for a quotation covering both the exact -3SFVA784E ordering code and an approved same-family alternative, then compare timing and qualification requirements.
Is XCKU040-3SFVA784E in stock?
Current XCKU040-3SFVA784E inventory should be checked through the Request a Quote form on this page. The request should identify the exact MPN, required quantity, acceptable date code, and delivery location. Because FPGA supply can move between lots and distribution channels, a general marketplace inventory count is not a reliable production commitment. Ask for confirmation of the quantity available for shipment and the proposed lead time when submitting the request.
What programming tools are compatible with XCKU040-3SFVA784E?
The XCKU040-3SFVA784E is programmed through AMD's programmable-logic tool flow, with device support confirmed in the installed Vivado Design Suite release. Engineers also use simulation, synthesis, implementation, bitstream generation, and hardware programming tools from that suite. Because package, speed-grade, and bitstream support depend on the tool release, consult AMD's supported-device list and Vivado documentation. Use the JTAG configuration path specified in the AMD reference design for the intended board.
What compliance documents are available for XCKU040-3SFVA784E?
RoHS, REACH, halogen-free, and conflict-minerals status should be confirmed using AMD's current product environmental and compliance documentation for the exact XCKU040-3SFVA784E ordering code. Compliance statements can vary by package, date code, and documentation revision, so generic family-level assumptions should be avoided. Request the applicable material declaration or product compliance report through the component documentation channel and retain it with the production bill of materials.
What are the key specifications engineers should know about XCKU040-3SFVA784E?
The key device facts are 468 user I/O, 53,025 logic cells, a 21,606,000-gate implementation capacity, a -3 speed grade, and a 784-ball FCBGA package with the SFVA784 code. The device is an AMD Kintex UltraScale FPGA intended for high-performance parallel logic, signal processing, communications, and data-acquisition systems. Its dense package also demands exact AMD pinout files, careful power-plane construction, high-quality ball-grid-array layout, and thermal analysis before fabrication.
What is the best drop-in replacement for XCKU040-3SFVA784E?
No universal drop-in replacement can be declared from package identity alone. XCKU040-1SFVA784I is the closest identified alternative because it preserves the XCKU040 family and 784-BFBGA footprint, but it differs in speed grade and temperature suffix. Same-family -1 and -2 SFVA784 devices may also be candidates when their ordering codes and operating grades fit. Validate the replacement with AMD device support, static timing analysis, power analysis, configuration checks, and a formal lifecycle review.

Données de référence d'ingénierie pour XCKU040-3SFVA784E — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose XCKU040-3SFVA784E when the design needs the highest relative speed grade among the listed XCKU040 SFVA784 options and its E temperature suffix satisfies the deployment environment. Select XCKU040-2SFVA784E or XCKU040-1SFVA784E when the design closes timing at the lower grade and that reduction can simplify qualification or supply planning. Use XCKU040-1SFVA784I when the industrial-temperature suffix is required and the -1 performance grade is sufficient. XCKU040-2SFVA784I combines the -2 grade with the I suffix, while XCKU040-3SFVA784I retains the target speed grade but changes the temperature suffix. For every substitution, confirm package balls, voltage and I/O standards, configuration compatibility, static timing, dynamic power, thermal behavior, Vivado support, and lifecycle requirements. A footprint-compatible part is not automatically equivalent in timing or environmental performance.

Comparaison avec les alternatives

Paramètre Ce produit XCKU040-1SFVA784E XCKU040-2SFVA784E XCKU040-1SFVA784I XCKU040-2SFVA784I XCKU040-3SFVA784I
Brand AMD AMD AMD AMD AMD AMD
Package 784-BFBGA, FCCSP 784-BFBGA, FCCSP 784-BFBGA, FCCSP 784-BFBGA, FCCSP 784-BFBGA, FCCSP 784-BFBGA, FCCSP
Package Code SFVA784 SFVA784 SFVA784 SFVA784 SFVA784 SFVA784
Device Family Kintex UltraScale Kintex UltraScale Kintex UltraScale Kintex UltraScale Kintex UltraScale Kintex UltraScale
User I/O 468 I/O 468 I/O 468 I/O 468 I/O 468 I/O 468 I/O
Logic Cells 53,025 logic cells 53,025 logic cells 53,025 logic cells 53,025 logic cells 53,025 logic cells 53,025 logic cells
Speed Grade -3 -1 -2 -1 -2 -3
Temperature Suffix E E E I I I
Terminal Count 784 terminals 784 terminals 784 terminals 784 terminals 784 terminals 784 terminals
Footprint Compatibility SFVA784 footprint SFVA784 footprint SFVA784 footprint SFVA784 footprint SFVA784 footprint SFVA784 footprint

Principaux différenciateurs

  • Highest relative speed grade within the listed XCKU040 SFVA784 alternatives (vs XCKU040-2SFVA784E)
  • Preserves the -3 performance grade while offering an industrial-temperature suffix (vs XCKU040-1SFVA784I)
  • High logic and I/O density in a single SFVA784 package (vs XCKU040-1SFVA784E)

Notes de conception

Use the AMD SFVA784 package pinout files and UG575 as the authority for every ball assignment. The package supports 784 terminals, including power, configuration, clock, and user I/O, so a simplified symbol can conceal mandatory connections. Place high-frequency decoupling close to the device, construct continuous power planes where the package rules permit, and preserve controlled-impedance escape paths from the BGA balls. Complete via-in-pad, solder-mask, and assembly-process reviews before releasing the layout.

Plan each power rail according to the selected speed grade and temperature grade rather than copying limits from a different XCKU040 suffix. Separate core, auxiliary, I/O, and configuration supplies only where the AMD reference design requires isolation. Use the manufacturer's recommended capacitor mix and placement to control transient response, and verify steady-state plus dynamic current in the implemented design. A lower speed grade can change timing and dynamic power, so power analysis must be rerun whenever an alternative is substituted.

Evaluate junction temperature using the actual -3 operating profile, board construction, airflow, and neighboring heat sources. A dense 784-ball FCBGA can concentrate heat around the die even though the package has many thermal connections. Model copper layers, thermal vias, board area, enclosure temperature, and sustained FPGA utilization. Verify that the selected -3 grade and temperature suffix remain within limits across ambient and airflow corners; do not substitute a lower grade solely from a timing result without rerunning thermal analysis.

Assign high-speed interfaces to banks capable of the required I/O standard and keep each interface's routing within the published reach and timing constraints. Pay particular attention to clock jitter, source-synchronous routing, return paths, and crosstalk around the dense BGA escape area. Use the AMD pinout files and design-methodology guidance for bank voltage compatibility. If changing from -3SFVA784E to an -1, -2, or I-suffixed alternative, rerun implementation timing and board-level signal-integrity checks because speed and temperature changes can alter margins.

Avoid treating every XCKU040 SFVA784 ordering code as an unconditional substitute. Speed grade changes can alter achievable clock rates and power, while the E and I suffixes identify different temperature classes. Before approving a replacement, confirm the exact ordering code, package-ball compatibility, power requirements, configuration method, supported Vivado release, lifecycle status, and operating-temperature range. Run static timing analysis, implementation, bitstream generation, and hardware validation on the final design rather than relying on package similarity alone.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

Exact compliance status was not identified for this ordering code. Confirm the current AMD product environmental documentation and material declaration before production release.

Données vérifiées le : 2026-11-14 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

xcku040 datasheet xcku040 2ffva1156e xcku040 2ffva1156i xcku040 1ffva1156c xcku040 ffva1156 xcku040 3ffva1156e xcku040 1fbva676c xcku040 2ffva1156e datasheet XCKU040-3SFVA784E datasheet XCKU040-3SFVA784E pinout XCKU040-3SFVA784E equivalent XCKU040-3SFVA784E replacement XCKU040-3SFVA784E price AMD XCKU040-3SFVA784E

Composants & termes associés

AMD Xilinx XCKU040-3SFVA784E XCKU040-1SFVA784E XCKU040-2SFVA784E XCKU040-1SFVA784I XCKU040-2SFVA784I XCKU040-3SFVA784I Kintex UltraScale FPGA field-programmable gate array programmable logic semiconductor SMD FCBGA 784-ball FCBGA SFVA784 468 I/O 53,025 logic cells 21,606,000 gates -3 speed grade Vivado Design Suite UG575 UltraScale Package Device Pinout Files high-speed data acquisition industrial signal processing
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ