XMC1100Q040F0064ABXUMA1 - 32MHz Cortex-M0 MCU | Infineon
Référence : XMC1100Q040F0064ABXUMA1 ✓ ActifXMC1100Q040F0064ABXUMA1 Présentation
A microcontroller is a programmable semiconductor containing a processor core, memory, and integrated peripherals on one chip. The XMC1100 belongs to the XMC1000 family of industrial ARM Cortex-M0 devices, placing it within the hierarchy of embedded processor, general-purpose microcontroller, and industrial control semiconductor. Its Cortex-M0 architecture supports efficient event-driven control while simplifying firmware development for motor, sensing, communications, and automation systems.
The device combines a 32 MHz clock with 64 KB of flash and 16 KB of SRAM. The 2 V to 40 V operating range supports industrial systems connected to wide-range supply rails, while the -40°C to 85°C temperature range covers demanding ambient environments. The PG-VQFN-40-13 package reduces board area and includes an exposed pad that requires careful PCB thermal-design practices.
The XMC1100 series is designed for price-sensitive applications requiring current embedded functionality. Its 64K x 8 flash organization provides deterministic on-chip program storage, while 16 KB of SRAM supports working data, stack space, and buffering. Port functions can be mapped to alternate output functions, with individual port pins supporting seven alternate output functions according to the Infineon XMC1100 datasheet.
Typical applications include industrial sensor nodes, compact motor controllers, building and automation modules, power-conversion controllers, and communications equipment. The combination of a 32 MHz Cortex-M0 core, wide supply range, and compact 40-pin package makes the XMC1100 particularly suitable for cost-sensitive equipment requiring local control without a high-performance processor or large external memory.
PCB design should follow the manufacturer land-pattern and exposed-pad requirements. Keep sensitive signal routing away from switching nodes, provide low-impedance supply and ground connections, and thermally couple the exposed pad to an adequate ground plane. Firmware must also account for the device's memory limits and use interrupt-driven or event-driven control where deterministic response is important.
This page organizes the XMC1100Q040F0064ABXUMA1 specifications, package information, sourcing options, design guidance, and verified drop-in alternatives. It also distinguishes confirmed pin and electrical characteristics from information that requires confirmation against the manufacturer datasheet, helping engineers plan a reliable embedded design.
Alternatives de remplacement direct pour XMC1100Q040F0064ABXUMA1 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Aucune alternative de remplacement direct disponible pour ce produit.
Demander des alternativesXMC1100Q040F0064ABXUMA1 Valeurs maximales et caractéristiques électriques
| Product Type | 32-bit industrial microcontroller |
| Processor Core | ARM Cortex-M0 |
| Architecture | 32-bit single-core |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 64 KB (64K x 8) |
| SRAM | 16 KB |
| Tension d'alimentation de fonctionnement | 2 V to 40 V |
| Industrial Temperature Range | -40°C to +85°C |
| Boîtier | PG-VQFN-40-13 |
| Nombre de broches | 40 pins |
| Type de montage | Surface mount |
| Exposed Pad | Present |
| Packing | Tape and reel |
| Sans halogène | Yes |
| Alternate Output Functions per Port Pin | Up to 7 |
Guide de configuration des broches du XMC1100Q040F0064ABXUMA1 pg-vqfn-40-13
Configuration des broches du XMC1100Q040F0064ABXUMA1 (boîtier pg-vqfn-40-13). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour XMC1100Q040F0064ABXUMA1.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
XMC1100Q040F0064ABXUMA1 convient pour 6 applications: Industrial Sensor and Condition Monitoring, Compact Motor and Actuator Control, Building Automation Module, Power Conversion Controller, Communications and Gateway Controller, Consumer and Utility Device Controller.
Industrial Sensor and Condition Monitoring
The XMC1100Q040F0064ABXUMA1 fits compact monitoring nodes that acquire sensor data, apply filtering, and report system status. Its 32 MHz ARM Cortex-M0 core provides useful processing headroom, while 64 KB of flash accommodates firmware, calibration constants, and event logic. The 16 KB SRAM supports sampling buffers and communication stacks. A 2 V to 40 V operating range simplifies interfacing with protected industrial rails, although the exposed-pad grounding and bypass layout must follow the manufacturer guidance for reliable operation from -40°C to 85°C.
Recommandé
Compact Motor and Actuator Control
The XMC1100Q040F0064ABXUMA1 is suitable for small brushless, stepper, solenoid, or actuator controllers where deterministic firmware timing and compact pin count matter. The 32 MHz Cortex-M0 processor can execute motor-control state machines and input/output events without an external processor. Its 64 KB flash provides room for control algorithms and fault handling, while 16 KB of SRAM supports timing variables and command buffers. Engineers should isolate noisy motor switching from sensitive logic and use the exposed ground pad to improve thermal performance.
Recommandé
Building Automation Module
The XMC1100Q040F0064ABXUMA1 can serve as the controller in a building-automation module that manages digital inputs, relay outputs, and local communications. Its 40-pin package balances a compact footprint with a broad I/O-oriented pin count, while the industrial -40°C to 85°C grade supports equipment deployed outside conditioned spaces. The 64 KB flash is suitable for protocol handlers, configuration storage, and diagnostics, and 16 KB of SRAM accommodates message buffers. Use the manufacturer pin table and alternate-function mapping before assigning ports.
Recommandé
Power Conversion Controller
The XMC1100Q040F0064ABXUMA1 is appropriate for supervisory control in compact DC-DC, inverter, and power-conversion modules. The 32 MHz Cortex-M0 core can execute control loops, fault detection, and communications tasks, while 64 KB of flash supports firmware for multiple operating modes. Its 2 V to 40 V supply range simplifies interface to protected intermediate rails. Thermal design remains critical: keep high-current paths compact, route them away from sensitive traces, and connect the exposed pad to a low-impedance thermal path according to the manufacturer package guidance.
Recommandé
Communications and Gateway Controller
The XMC1100Q040F0064ABXUMA1 can support a small protocol gateway or communications endpoint where protocol processing must coexist with local control. The Cortex-M0 architecture at 32 MHz is appropriate for event-driven packet handling, status reporting, and configuration management. Its 64 KB flash constrains application size, making efficient firmware and selective buffering important, while 16 KB of SRAM can support short frame queues. The 40-pin package reduces board area and the wide supply range supports shared industrial inputs, subject to careful signal-integrity and grounding practices.
Recommandé
Consumer and Utility Device Controller
The XMC1100Q040F0064ABXUMA1 also fits cost-sensitive utility, appliance, and interface devices requiring dependable local control. Its 64 KB flash can hold application firmware and configuration logic, while the 32 MHz Cortex-M0 core handles buttons, indicators, sensors, and communication tasks. The compact PG-VQFN-40-13 package reduces board area in space-constrained products, and the 2 V minimum operating voltage supports low-voltage digital systems. Design reviews should verify every peripheral supply domain and apply the proper exposed-pad and decoupling pattern.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour XMC1100Q040F0064ABXUMA1 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit |
|---|---|
| Brand | Infineon Technologies |
| Package | PG-VQFN-40-13 |
| Processor Core | ARM Cortex-M0 |
| CPU Frequency | 32 MHz |
| Flash Memory | 64 KB (64K x 8) |
| SRAM | 16 KB |
| Operating Voltage | 2 V to 40 V |
| Temperature Range | -40°C to +85°C |
| Architecture | 32-bit single-core |
| Alternate Port Output Functions | Up to 7 per port pin |
Principaux différenciateurs
- Broad supply-voltage range for embedded industrial use (vs XMC1100-Q024F0064-AB)
- Compact 40-pin surface-mount implementation (vs XMC1100T038F0016AAXUMA1)
- Balanced embedded memory configuration (vs XMC1100T038F0032AAXUMA1)
Notes de conception
Treat the exposed pad as both an electrical land and a thermal path. Connect it to the ground reference using the manufacturer land pattern, provide uninterrupted copper beneath the device, and minimize thermal vias through resistance. Avoid placing sensitive inputs or high-impedance analog traces directly under the pad. Validate junction-temperature margins across the full -40°C to 85°C ambient range.
Place all required bypass capacitors close to their associated power pins and keep the supply-current loop small. Connect the ground reference through a low-impedance plane, route high-current or switching outputs away from sensitive traces, and follow the Infineon package drawing for pad, solder-mask, and copper dimensions. The 40-pin VQFN footprint is not interchangeable with a 24-pin XMC1100 variant without a layout change.
Do not substitute an XMC1100 family member solely because it has the same core, clock, or flash size. Verify the complete pin table, alternate-function mapping, exposed-pad connection, SRAM capacity, supply-domain limits, and peripheral set before approval. Firmware also must be checked for startup, clock, interrupt, and peripheral differences because a package-compatible footprint alone does not guarantee software compatibility.
Although the operating supply range extends to 40 V, do not interpret that rating as permission to apply an unregulated 40 V source. Use the electrical-characteristics table to confirm operating and absolute-maximum limits, input ramp behavior, I/O limits, and startup conditions. Provide local decoupling and verify regulator tolerance, transient response, and fault behavior across the complete operating range.
Informations de conformité
The product comparison identifies the device as halogen-free. RoHS, REACH, lead-free, conflict-minerals, and automotive qualification status require confirmation from the manufacturer or applicable compliance documentation.