Z86C9116PEC - 8-Bit 16MHz ROMless Z8 MCU | Zilog
Référence : Z86C9116PEC ✓ ActifZ86C9116PEC Présentation
A ROMless microcontroller is an integrated circuit that contains the processor core and peripheral functions but retrieves its program from external memory. This differs from a mask-programmable or flash-memory MCU because application code remains in external storage, allowing the firmware to be updated without replacing the controller. The Z86C9116PEC occupies the ROMless, Z8, 8-bit, 16 MHz portion of the Zilog embedded-controller portfolio.
Key characteristics include a 16 MHz operating frequency, an 8-bit CPU architecture, external-program-memory operation, and a 40-pin PDIP package with a 0.620-inch body width and 15.75 mm length. The through-hole package supports conventional PCB assembly and is useful in control boards that require manual insertion, prototyping, or socketed serviceability. Its 8-bit data bus and 16 MHz clock place it in the traditional embedded-control class rather than the high-speed 16- or 32-bit application-processor class.
The Z8 architecture is designed around a compact instruction set and dedicated peripheral resources, allowing engineers to implement control loops, interface protocols, and timing functions with relatively modest external circuitry. Because the controller is ROMless, external address and data buses connect the processor to program storage. Board-level design therefore requires careful routing of address, data, and control signals to preserve signal integrity at the operating clock.
Typical uses include industrial machine controls, appliance controllers, instrumentation modules, motor-control support logic, and legacy peripheral-control boards. The 40-pin PDIP package also makes the device suitable for educational and prototype platforms where through-hole components are easier to assemble and rework. It is less suitable for new space-constrained products because surface-mount packages normally reduce board area and improve automated assembly throughput.
When laying out a board for the Z86C9116PEC, place external program-memory devices and any bus transceivers close to the controller, route clock and address signals away from high-current switching nodes, and decouple each supply rail near the device. Confirm the memory map, address multiplexing, and external bus timing against the manufacturer datasheet before releasing the PCB. This page combines device specifications, package details, verified listing links, and practical design guidance for engineers planning a Z86C91-based control board.
Alternatives de remplacement direct pour Z86C9116PEC — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec Z86C9116PEC (même facteur de forme et même empreinte) — différant par Program Memory, Mounting Style, Package Type, I/O Port Count, RoHS Status.
Z86C9116PSG
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →Z86C9116PEG
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →Z86C9116PSC
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →Z86C9116PEC Valeurs maximales et caractéristiques électriques
| Product Type | 8-bit ROMless Microcontroller |
| Manufacturer | Zilog |
| CPU Core | Z8 |
| Fréquence d'horloge maximale | 16 MHz |
| Largeur du bus de données | 8 bit |
| Program Memory | External memory; no internal ROM |
| Process Technology | CMOS |
| Package Type | PDIP-40 |
| Package Body Dimensions | 0.620 in width, 15.75 mm length |
| Style de montage | Through Hole |
| Series | Z86C91 |
| Program Memory Interface | External parallel program memory bus |
| Statut RoHS | Not RoHS compliant |
| Supplier Configuration | Available in tube packing through authorized distribution |
Guide de configuration des broches du Z86C9116PEC 0.620 in width, 15.75 mm length
Configuration des broches du Z86C9116PEC (boîtier 0.620 in width, 15.75 mm length). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour Z86C9116PEC.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
Z86C9116PEC convient pour 6 applications: Industrial Machine Control, Appliance Control Module, Instrumentation and Data Acquisition, Peripheral Controller and Interface Hub, Motor and Power Control Support, Educational and Prototype Platforms.
Industrial Machine Control
The Z86C9116PEC fits compact machine-control boards that require deterministic 8-bit processing, an external program-memory bus, and through-hole assembly. Its 16 MHz Z8 core provides the operating headroom for sequencing actuators, reading inputs, and coordinating peripheral functions. Place external program memory close to the controller and route the address, data, and control bus away from motor-switching nodes to reduce susceptibility to coupling. The 40-pin PDIP outline is especially useful where manual insertion, socketed maintenance, or conventional through-hole assembly is preferred.
Recommandé
Appliance Control Module
The Z86C9116PEC can serve as the main controller in an appliance module that coordinates relays, indicators, sensors, and user-interface inputs. Its 8-bit architecture and 16 MHz operating frequency fit supervisory control tasks, while ROMless operation allows firmware to remain in external memory for easier revision. Use stable external storage with attention to bus timing, and decouple supply pins close to the device. The through-hole package also supports repair-oriented appliance boards that use conventional assembly and service techniques.
Recommandé
Instrumentation and Data Acquisition
The Z86C9116PEC is appropriate for instrumentation front ends that require local control, status reporting, and communication-interface coordination. The 16 MHz Z8 core can service interrupt-driven I/O, measurement sequencing, and protocol formatting while program code resides in external memory. Keep analog and high-impedance sensor circuitry physically separated from the digital address and data buses, and use the manufacturer pin-description table to assign unused I/O safely. Its PDIP format is useful for laboratory modules and educational instruments assembled by hand.
Recommandé
Peripheral Controller and Interface Hub
The Z86C9116PEC works well as a dedicated peripheral controller when a system needs to bridge legacy I/O, buffering status signals, or coordinating multiple external devices. Its external ROMless interface separates application code from the controller and permits controlled firmware updates. Use the Z8 bus structure to define clear address windows for each peripheral, and avoid routing high-speed memory signals beneath switching inductors or relay-driver traces. The 40-pin DIP package provides a practical footprint for retrofit and expansion boards.
Recommandé
Motor and Power Control Support
The Z86C9116PEC can support supervisory functions in motor-control systems where a dedicated processor handles sequencing, status monitoring, fault flags, and communication with a power stage. The 16 MHz Z8 core offers sufficient clock rate for control coordination, although the power-conversion loop remains outside the MCU. Keep the 8-bit address and data buses away from motor-drive power paths, use solid grounding, and follow the manufacturer datasheet for supply decoupling. The DIP package is useful in pre-production and low-volume control platforms.
Recommandé
Educational and Prototype Platforms
The Z86C9116PEC suits educational logic-controller and embedded-systems platforms because its 40-pin through-hole package is easy to inspect, route, and assemble. Students can connect external program memory and study the Z8 address and data buses directly on a solderless or perforated prototype board. The 16 MHz operating speed demonstrates timing and interrupt behavior without the complexity of a high-end MCU. For permanent deployments, move the design to a denser package only after validating the external bus layout and firmware timing.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour Z86C9116PEC — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | Z86C9116PSG | Z86C9116PEG | Z86C9116PSC |
|---|---|---|---|---|
| Brand | Zilog | Zilog | Zilog | Zilog |
| Package | PDIP-40 | PDIP-40 - same | PDIP-40 - same | PDIP-40 - same |
| CPU Core | Z8 | Z8 | Z8 | Z8 |
| Maximum Clock Frequency | 16 MHz | 16 MHz | 16 MHz | 16 MHz |
| Data Bus Width | 8 bit | 8 bit | 8 bit | 8 bit |
| Program Memory | External; ROMless | External; ROMless | External; ROMless | External; ROMless |
| Mounting Style | Through Hole | Through Hole | Through Hole | Through Hole |
| Series | Z86C91 | Z86C91 | Z86C91 | Z86C91 |
| Process Technology | CMOS | CMOS | CMOS | CMOS |
Principaux différenciateurs
- Exact 16 MHz ROMless Z8 configuration with a 40-pin through-hole footprint (vs Z86C9116FEC)
- Directly documented Zilog drop-in sourcing option (vs Z86C9116PSG)
- Compatible DIP footprint without PCB modification (vs Z86C9116PEG)
Notes de conception
Place external program memory and address-decoding logic close to the Z86C9116PEC, and keep the external address, data, and control bus as short as practical. The controller operates at 16 MHz, so long unterminated traces can reduce timing margin and increase susceptibility to crosstalk. Route these signals away from switching nodes, relay-driver outputs, and analog input areas, and review the external memory interface against the bus timing tables in the manufacturer datasheet.
Plan the 40-pin PDIP footprint on a grid that accommodates the 0.620-inch body width and 15.75 mm length, while leaving space for the tube and for hand insertion or socket use. Do not crowd adjacent parts around the package ends, where technicians need clearance during rework. Confirm hole diameter and row spacing against the mechanical drawing rather than relying only on generic DIP dimensions.
Separate sensitive analog or sensor circuitry from the digital bus and keep supply-return paths continuous. Place decoupling capacitors near the device's supply pins with short, low-inductance connections, and isolate noisy loads with appropriate filtering. Because this is a ROMless controller, power-supply startup behavior affects when external memory becomes readable; validate the power-on sequence and bus-state requirements in hardware before production release.
Informations de conformité
The Avag product comparison marks the Z86C9116PEC as non-RoHS. No additional compliance declarations were identified in the product listings.