Z86C9116PEC - 8-Bit 16MHz ROMless Z8 MCU | Zilog
MPN: Z86C9116PEC ✓ 啟用中Z86C9116PEC 概覽
A ROMless microcontroller is an integrated circuit that contains the processor core and peripheral functions but retrieves its program from external memory. This differs from a mask-programmable or flash-memory MCU because application code remains in external storage, allowing the firmware to be updated without replacing the controller. The Z86C9116PEC occupies the ROMless, Z8, 8-bit, 16 MHz portion of the Zilog embedded-controller portfolio.
Key characteristics include a 16 MHz operating frequency, an 8-bit CPU architecture, external-program-memory operation, and a 40-pin PDIP package with a 0.620-inch body width and 15.75 mm length. The through-hole package supports conventional PCB assembly and is useful in control boards that require manual insertion, prototyping, or socketed serviceability. Its 8-bit data bus and 16 MHz clock place it in the traditional embedded-control class rather than the high-speed 16- or 32-bit application-processor class.
The Z8 architecture is designed around a compact instruction set and dedicated peripheral resources, allowing engineers to implement control loops, interface protocols, and timing functions with relatively modest external circuitry. Because the controller is ROMless, external address and data buses connect the processor to program storage. Board-level design therefore requires careful routing of address, data, and control signals to preserve signal integrity at the operating clock.
Typical uses include industrial machine controls, appliance controllers, instrumentation modules, motor-control support logic, and legacy peripheral-control boards. The 40-pin PDIP package also makes the device suitable for educational and prototype platforms where through-hole components are easier to assemble and rework. It is less suitable for new space-constrained products because surface-mount packages normally reduce board area and improve automated assembly throughput.
When laying out a board for the Z86C9116PEC, place external program-memory devices and any bus transceivers close to the controller, route clock and address signals away from high-current switching nodes, and decouple each supply rail near the device. Confirm the memory map, address multiplexing, and external bus timing against the manufacturer datasheet before releasing the PCB. This page combines device specifications, package details, verified listing links, and practical design guidance for engineers planning a Z86C91-based control board.
直接替換替代品,適用於 Z86C9116PEC — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: Z86C9116PEC (相同外形與佔位) — 差異在於 Program Memory, Mounting Style, Package Type, I/O Port Count, RoHS Status.
Z86C9116PSG
✅ 直接替換聯絡詢價
查看資料表 →Z86C9116PEG
✅ 直接替換聯絡詢價
查看資料表 →Z86C9116PSC
✅ 直接替換聯絡詢價
查看資料表 →Z86C9116PEC 最大額定值與電氣特性
| Product Type | 8-bit ROMless Microcontroller |
| Manufacturer | Zilog |
| CPU Core | Z8 |
| 最大時脈頻率 | 16 MHz |
| 資料匯流排寬度 | 8 bit |
| Program Memory | External memory; no internal ROM |
| Process Technology | CMOS |
| Package Type | PDIP-40 |
| Package Body Dimensions | 0.620 in width, 15.75 mm length |
| 安裝方式 | Through Hole |
| Series | Z86C91 |
| Program Memory Interface | External parallel program memory bus |
| RoHS 狀態 | Not RoHS compliant |
| Supplier Configuration | Available in tube packing through authorized distribution |
Z86C9116PEC 0.620 in width, 15.75 mm length 腳位配置指南
Z86C9116PEC(0.620 in width, 15.75 mm length 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: Z86C9116PEC.
請參閱 資料表 以查看完整腳位配置。
典型應用
Z86C9116PEC 適用於 6 應用s: Industrial Machine Control, Appliance Control Module, Instrumentation and Data Acquisition, Peripheral Controller and Interface Hub, Motor and Power Control Support, Educational and Prototype Platforms.
Industrial Machine Control
The Z86C9116PEC fits compact machine-control boards that require deterministic 8-bit processing, an external program-memory bus, and through-hole assembly. Its 16 MHz Z8 core provides the operating headroom for sequencing actuators, reading inputs, and coordinating peripheral functions. Place external program memory close to the controller and route the address, data, and control bus away from motor-switching nodes to reduce susceptibility to coupling. The 40-pin PDIP outline is especially useful where manual insertion, socketed maintenance, or conventional through-hole assembly is preferred.
推薦
Appliance Control Module
The Z86C9116PEC can serve as the main controller in an appliance module that coordinates relays, indicators, sensors, and user-interface inputs. Its 8-bit architecture and 16 MHz operating frequency fit supervisory control tasks, while ROMless operation allows firmware to remain in external memory for easier revision. Use stable external storage with attention to bus timing, and decouple supply pins close to the device. The through-hole package also supports repair-oriented appliance boards that use conventional assembly and service techniques.
推薦
Instrumentation and Data Acquisition
The Z86C9116PEC is appropriate for instrumentation front ends that require local control, status reporting, and communication-interface coordination. The 16 MHz Z8 core can service interrupt-driven I/O, measurement sequencing, and protocol formatting while program code resides in external memory. Keep analog and high-impedance sensor circuitry physically separated from the digital address and data buses, and use the manufacturer pin-description table to assign unused I/O safely. Its PDIP format is useful for laboratory modules and educational instruments assembled by hand.
推薦
Peripheral Controller and Interface Hub
The Z86C9116PEC works well as a dedicated peripheral controller when a system needs to bridge legacy I/O, buffering status signals, or coordinating multiple external devices. Its external ROMless interface separates application code from the controller and permits controlled firmware updates. Use the Z8 bus structure to define clear address windows for each peripheral, and avoid routing high-speed memory signals beneath switching inductors or relay-driver traces. The 40-pin DIP package provides a practical footprint for retrofit and expansion boards.
推薦
Motor and Power Control Support
The Z86C9116PEC can support supervisory functions in motor-control systems where a dedicated processor handles sequencing, status monitoring, fault flags, and communication with a power stage. The 16 MHz Z8 core offers sufficient clock rate for control coordination, although the power-conversion loop remains outside the MCU. Keep the 8-bit address and data buses away from motor-drive power paths, use solid grounding, and follow the manufacturer datasheet for supply decoupling. The DIP package is useful in pre-production and low-volume control platforms.
推薦
Educational and Prototype Platforms
The Z86C9116PEC suits educational logic-controller and embedded-systems platforms because its 40-pin through-hole package is easy to inspect, route, and assemble. Students can connect external program memory and study the Z8 address and data buses directly on a solderless or perforated prototype board. The 16 MHz operating speed demonstrates timing and interrupt behavior without the complexity of a high-end MCU. For permanent deployments, move the design to a denser package only after validating the external bus layout and firmware timing.
推薦
推薦產品摘要
工程參考資料,適用於 Z86C9116PEC — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | Z86C9116PSG | Z86C9116PEG | Z86C9116PSC |
|---|---|---|---|---|
| Brand | Zilog | Zilog | Zilog | Zilog |
| Package | PDIP-40 | PDIP-40 - same | PDIP-40 - same | PDIP-40 - same |
| CPU Core | Z8 | Z8 | Z8 | Z8 |
| Maximum Clock Frequency | 16 MHz | 16 MHz | 16 MHz | 16 MHz |
| Data Bus Width | 8 bit | 8 bit | 8 bit | 8 bit |
| Program Memory | External; ROMless | External; ROMless | External; ROMless | External; ROMless |
| Mounting Style | Through Hole | Through Hole | Through Hole | Through Hole |
| Series | Z86C91 | Z86C91 | Z86C91 | Z86C91 |
| Process Technology | CMOS | CMOS | CMOS | CMOS |
主要差異化特點
- Exact 16 MHz ROMless Z8 configuration with a 40-pin through-hole footprint (對比Z86C9116FEC)
- Directly documented Zilog drop-in sourcing option (對比Z86C9116PSG)
- Compatible DIP footprint without PCB modification (對比Z86C9116PEG)
設計說明
Place external program memory and address-decoding logic close to the Z86C9116PEC, and keep the external address, data, and control bus as short as practical. The controller operates at 16 MHz, so long unterminated traces can reduce timing margin and increase susceptibility to crosstalk. Route these signals away from switching nodes, relay-driver outputs, and analog input areas, and review the external memory interface against the bus timing tables in the manufacturer datasheet.
Plan the 40-pin PDIP footprint on a grid that accommodates the 0.620-inch body width and 15.75 mm length, while leaving space for the tube and for hand insertion or socket use. Do not crowd adjacent parts around the package ends, where technicians need clearance during rework. Confirm hole diameter and row spacing against the mechanical drawing rather than relying only on generic DIP dimensions.
Separate sensitive analog or sensor circuitry from the digital bus and keep supply-return paths continuous. Place decoupling capacitors near the device's supply pins with short, low-inductance connections, and isolate noisy loads with appropriate filtering. Because this is a ROMless controller, power-supply startup behavior affects when external memory becomes readable; validate the power-on sequence and bus-state requirements in hardware before production release.
合規資訊
The Avag product comparison marks the Z86C9116PEC as non-RoHS. No additional compliance declarations were identified in the product listings.