Zilog

Z86E2112FSC - 8-Bit 12MHz OTP MCU with UART | Zilog

Référence : Z86E2112FSC ✓ Actif
5.00 V Vdss 44-pin LQFP Package 12 MHz Speed 8 KB OTP Memory
MOQ : 1 |

Z86E2112FSC Présentation

The Zilog Z86E2112FSC is an 8-bit Z8 microcontroller rated for operation up to 12 MHz, with 8 KB of one-time-programmable memory, 236 bytes of RAM, 32 I/O pins, and UART communications in a 44-pin LQFP package. It is designed for compact embedded-control tasks that require deterministic serial communication and a small, surface-mount footprint.

An 8-bit microcontroller is an embedded-processing IC that integrates a processor core, nonvolatile program memory, data memory, I/O ports, and communication peripherals into one package. The Z86E2112FSC belongs to the Z8 family, where the MCU sits within the broader hierarchy of embedded controllers, semiconductor devices, and programmable control systems. Its one-time-programmable architecture allows application firmware to be permanently written into the device for production control.

The Z86E2112FSC combines a 12 MHz maximum clock with 8 KB of OTP program memory and a hardware UART. The UART supports communications with host computers, sensors, human-interface modules, and other embedded controllers without requiring a separate serial-interface IC. The 32 I/O pins provide a practical interface capacity for logic inputs, output control, and external peripheral connections when the complete pin-assignment table and electrical limits are followed.

This part operates from a nominal 5.00 V supply with a listed maximum of 5.50 V. That supply range makes a regulated 5 V rail the natural operating environment. Clock-sensitive and UART-connected circuits should use suitable bypassing, controlled rise times, and signal levels compatible with the device's documented electrical characteristics. Because its program memory is OTP rather than reprogrammable Flash, firmware changes require a new programmed device.

Typical uses include compact serial controllers, appliance interfaces, industrial modules, instrumentation, lighting controls, and embedded communication equipment. The 44-pin LQFP package offers enough connections for mixed digital I/O and serial functions while remaining compatible with conventional surface-mount assembly. Designs must observe the manufacturer’s pin and electrical requirements when assigning multiplexing functions.

For a new PCB, the most important design decision is preserving the exact 44-pin footprint and validating the selected oscillator, reset, supply, and UART implementation against the manufacturer datasheet. For an existing assembly, verify package suffix, temperature grade, supply voltage, firmware memory, and all peripheral assignments before considering substitution.

This page combines the device’s core operating specifications with sourcing guidance, drop-in replacement analysis, package considerations, and application-oriented design notes. It is intended to help engineers determine whether the Z86E2112FSC matches the required memory, clock, I/O, serial-interface, supply, and package constraints without overlooking OTP-programming limitations.

Alternatives de remplacement direct pour Z86E2112FSC — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Z86E2112PSC

✅ Remplacement direct
📦 LQFP-44
Both devices are listed as 8-bit MCUs with 12 MHz clock and 8 KB OTP memory; the suffix-specific temperature grade and qualification still require final verification.

📋 Alternative de référence (hors catalogue)

Z86E2112FSC Valeurs maximales et caractéristiques électriques

Processor Architecture 8-bit Z8 microcontroller
Maximum Clock Speed 12 MHz
Program Memory 8 KB OTP
Program Memory Organization 8K x 8 bits
RAM 236 x 8 bits
Number of I/O Pins 32 pins
UART 1 UART interface
Nominal Supply Voltage 5.00 V
Maximum Supply Voltage 5.50 V
Boîtier 44-pin LQFP
Type de montage Surface mount
Core Z8 embedded processor and controller
Type de mémoire One-time programmable
Operating Frequency Up to 12 MHz

Guide de configuration des broches du Z86E2112FSC 44-pin lqfp

Configuration des broches du Z86E2112FSC (boîtier 44-pin lqfp). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.

Schéma de brochage du boîtier 44-pin lqfp pour le Z86E2112FSC

Aucune donnée de brochage détaillée disponible pour Z86E2112FSC.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

Z86E2112FSC convient pour 6 applications: UART-Based Appliance Controller, Industrial Serial Interface Module, LED Lighting and Sequencer Control, Instrumentation Front-End Control, Smart Sensor Hub, Communications and Network Equipment Control.

🔧

UART-Based Appliance Controller

The Z86E2112FSC fits compact appliance-control boards that need a dedicated UART and a moderate number of digital I/O lines. Its 12 MHz Z8 processor provides the operating speed for protocol handling and state-machine logic, while 8 KB of OTP memory stores fixed appliance firmware and 236 bytes of RAM supports short working buffers. Place the device beside a regulated 5 V rail and connect the UART through the pin and electrical network specified in the manufacturer datasheet. Because program memory is OTP, firmware changes require replacement of the programmed MCU, which makes the device most appropriate when production logic is stable and field updates are not needed.

🏭

Industrial Serial Interface Module

The Z86E2112FSC is suitable for a compact industrial serial module that translates commands, monitors discrete inputs, and controls outputs through a UART. The 32 I/O pins offer more interface capacity than a minimal 8-pin controller, while the 8 KB OTP program space can hold a dedicated command processor and device-specific logic. The nominal 5.00 V operating voltage and 5.50 V maximum support integration with a regulated industrial rail, subject to the complete operating-temperature requirements. Keep the UART routing away from switching-node circuitry, provide local supply bypassing, and verify every multiplexing assignment against the 44-pin package table before releasing the layout.

💡

LED Lighting and Sequencer Control

The Z86E2112FSC can control LED sequences, status indicators, and simple driver-enable logic in a lighting module. Its 12 MHz clock and 32 I/O pins are sufficient for multiple timed outputs and control-state management, while the UART provides a service or configuration channel for production testing. The device should operate from the same regulated 5 V domain used by the digital control circuitry, with appropriate bypassing near the supply pins. Because OTP memory cannot be rewritten in the field, lighting behavior should be validated before programming. LED current drivers must remain separate from the MCU pins, and grounding and return-current paths should be arranged to avoid injecting switching noise into the serial interface.

📟

Instrumentation Front-End Control

The Z86E2112FSC is useful as the supervisory controller in a compact instrumentation product that combines a UART command interface with digital measurement-control signals. Its 8 KB OTP memory accommodates fixed setup, calibration tables, and command handlers, while 236 bytes of RAM can support temporary status and protocol data. The 32 I/O pins can be allocated among control signals, mode selection, alarm outputs, and external data devices. For a measurement product, analog front ends should remain separate and quiet, while the MCU ground and supply return should be routed to avoid disturbing sensitive signals. Confirm the UART baud-rate requirements, oscillator arrangement, and pin multiplexing directly from the manufacturer documentation.

🧩

Smart Sensor Hub

The Z86E2112FSC can act as the protocol hub for a compact sensor assembly that receives readings over UART and manages local digital controls. Its 12 MHz processing rate is appropriate for polling sensors, validating data, and updating indicators, while 32 I/O pins support sensor-enable signals, alarms, and configuration lines. A regulated 5 V rail and local decoupling support stable digital operation. The short 236-byte RAM budget requires a memory-efficient scheduler, so buffering should be kept bounded and application code should avoid unnecessary duplication. Because the OTP program memory is permanent, the sensor protocol and calibration behavior should be finalized before production programming.

🌐

Communications and Network Equipment Control

The Z86E2112FSC is appropriate for low-level control tasks in communications equipment, including status monitoring, configuration, and UART-linked subsystem management. Its 32 I/O pins provide ample parallel control capacity, while the 12 MHz Z8 core executes command processing and fault-state logic. The 5 V operating point integrates naturally with digital equipment rails, provided the board respects the device’s maximum supply voltage and decoupling requirements. In a network product, keep the MCU and UART traces physically separated from high-energy switching paths and maintain a controlled return-current path beneath the device where board construction permits. Use the complete manufacturer datasheet to confirm package pin multiplexing before layout release.

What are the key specifications of Z86E2112FSC that engineers should know?
The Z86E2112FSC is an 8-bit Zilog microcontroller with a maximum clock frequency of 12 MHz, 8 KB of OTP program memory, 236 bytes of RAM, 32 I/O pins, and a UART interface. According to the Zilog product information indexed for this device, it is packaged in a 44-pin LQFP and operates from a nominal 5.00 V supply with a 5.50 V maximum. These specifications define its suitability for compact embedded-control and serial-communication designs.
What is the operating voltage of Z86E2112FSC?
The Z86E2112FSC operates at a nominal 5.00 V DC, with a listed maximum supply voltage of 5.50 V. According to the indexed Zilog specifications, this is the nominal operating rail for the device. A regulated supply with appropriate decoupling should therefore be used, while the complete manufacturer datasheet should be consulted for minimum voltage, voltage tolerance, and absolute-maximum limits.
What memory does the Z86E2112FSC contain?
The Z86E2112FSC contains 8 KB of one-time-programmable program memory organized as 8K x 8 bits and 236 bytes of RAM. The indexed Zilog product description identifies the part as an 8-bit MCU with 8K OTP and 236 x 8 RAM. Because program memory is OTP, firmware is intended for permanent programming during manufacturing rather than repeated in-field rewriting.
What peripherals and I/O does Z86E2112FSC provide?
The Z86E2112FSC provides 32 I/O pins and a UART interface for serial communications. According to the Zilog device listing, the MCU is clocked at up to 12 MHz and includes 236 bytes of RAM. The UART can connect the controller to sensors, host systems, or service interfaces, while the 32 I/O pins support external logic and peripheral functions within the constraints of the complete pin-assignment table.
Where can I download the Z86E2112FSC datasheet PDF?
The Z86E2112FSC datasheet can be accessed through the Zilog datasheet listing on Octopart or the linked manufacturer document available from that page. According to the indexed result, the document provides the device’s technical specifications, product features, package information, and electrical details. Use the pin-description and electrical-characteristics sections for final schematic, PCB, and firmware decisions.
Where can I find the Z86E2112FSC pinout?
The Z86E2112FSC pinout is published in the manufacturer datasheet, whose 44-pin LQFP pin-description table identifies each package terminal and its supported functions. The indexed device information confirms a 44-pin LQFP package with 32 I/O pins. Use the datasheet pin table when assigning multiplexed UART, clock, reset, supply, and general-purpose I/O functions.
Can Z86E2112PSC replace Z86E2112FSC?
The Z86E2112PSC is a same-family candidate for review because the indexed listing identifies the same 12 MHz clock and 8 KB OTP configuration. However, replacement is only valid after confirming that the suffix-specific temperature grade, package, pin functions, electrical limits, and qualification requirements match the installed board. The candidate is recorded as a drop-in review item, not as a universal substitute.
What is the best drop-in replacement for Z86E2112FSC?
The Z86E2112PSC is the closest documented replacement candidate because it retains the 8-bit MCU architecture, 12 MHz clock, and 8 KB OTP program-memory configuration. Confirm the exact package and suffix-specific operating grade before substituting it. The Request a Quote form on this page can be used to request current availability and lead time for the exact replacement MPN.
Is Z86E2112FSC suitable for a UART-based industrial controller?
The Z86E2112FSC is suitable for a compact UART-based controller when the design operates from a regulated 5 V rail and stays within its documented electrical limits. Its 12 MHz clock, 8 KB OTP memory, 32 I/O pins, and UART provide the core resources for serial control and discrete interfaces. Industrial suitability must also be checked against temperature, qualification, and isolation requirements.
When should I choose Z86E2112FSC over another 8-bit MCU?
Choose the Z86E2112FSC when the design specifically benefits from its Z8 architecture, 12 MHz operating rate, 8 KB OTP program memory, 32 I/O pins, UART, and 44-pin LQFP footprint. It is especially appropriate when permanent one-time programming is acceptable and an existing board already uses this package. A different MCU should be selected if the product needs reprogrammable Flash, greater RAM, more pins, or a different serial architecture.
Z86E2112FSC vs Z86E2112PSC: which is better?
The Z86E2112FSC and Z86E2112PSC both appear in the indexed Zilog listings as 8-bit, 12 MHz MCUs with 8 KB OTP memory, making them closely related configuration candidates. The deciding factors are the suffix-specific package, temperature range, and qualification requirements. Verify those details against the manufacturer datasheet and the mechanical requirements of the PCB before selecting one.
What can replace Z86E2112FSC in an existing design?
The Z86E2112PSC is the documented same-family replacement candidate because it shares the 12 MHz clock and 8 KB OTP program-memory configuration. A true drop-in substitution must also preserve the 44-pin LQFP footprint, pin multiplexing, 5 V operating condition, and peripheral assignments. Use the manufacturer pin table to validate compatibility before committing a new production order.
Is Z86E2112FSC the same as a generic 8-bit microcontroller?
No. The Z86E2112FSC is a specific Z8-family device with a 12 MHz maximum clock, 8 KB OTP program memory, 236 bytes of RAM, 32 I/O pins, UART, and a 44-pin LQFP package. Its Z8 instruction set, peripheral implementation, and package assignments must be considered when writing firmware or substituting a generic MCU, even if another device has similar headline memory and clock ratings.
Where to buy Z86E2112FSC online?
Use the Request a Quote form on this page to request the Z86E2112FSC, current availability, and lead time for the exact 44-pin LQFP MPN. The manufacturer and distributor records indexed for this part show that it remains an identifiable catalog component with a 12 MHz, 8 KB OTP configuration. Include target quantity, programming requirements, and solder-process needs in the request.
What is the price and lead time for Z86E2112FSC?
Use the Request a Quote form on this page for the current Z86E2112FSC unit price, quantity breaks, stock position, and production lead time. The structured pricing area updates separately from technical content because component pricing and availability can change quickly. Specify the required quantity, date code needs, programming status, and delivery destination in the quote request.

Données de référence d'ingénierie pour Z86E2112FSC — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the Z86E2112FSC when an existing 44-pin LQFP board requires an 8-bit Z8 controller with 12 MHz operation, 8 KB of OTP program memory, 236 bytes of RAM, 32 I/O pins, and a UART. Its fixed-program architecture is useful for stable production logic in appliances, instrumentation, sensor modules, and industrial control boards where field firmware updates are unnecessary. Consider the Z86E2112PSC when its suffix-specific temperature grade, qualification, and ordering configuration satisfy the product requirements; it retains the same documented core clock and memory configuration. Select a different MCU if the design requires reprogrammable Flash, more RAM, additional communication peripherals, or a package other than LQFP-44. For either candidate, validate supply limits, oscillator implementation, reset behavior, UART electrical requirements, and complete pin multiplexing against the manufacturer datasheet before committing to a footprint or production order.

Comparaison avec les alternatives

Paramètre Ce produit Z86E2112PSC
Brand Zilog Zilog
Package 44-pin LQFP 44-pin LQFP
Architecture 8-bit Z8 8-bit Z8
Maximum Clock Speed 12 MHz 12 MHz
Program Memory 8 KB OTP 8 KB OTP
RAM 236 x 8 bits 236 x 8 bits
I/O Pins 32 32
Serial Interface UART UART
Nominal Supply Voltage 5.00 V 5.00 V
Maximum Supply Voltage 5.50 V 5.50 V

Principaux différenciateurs

  • Direct same-family drop-in candidate (vs Z86E2112PSC)
  • Compact 44-pin integration (vs Z86E2112PSC)
  • Production-oriented OTP program memory (vs Generic Flash-memory 8-bit MCU)

Notes de conception

Power the Z86E2112FSC from a regulated 5.00 V rail and keep the supply within the listed 5.50 V maximum. Place the manufacturer-recommended input capacitor close to the supply and ground pins, and route high-current loads away from the MCU’s supply trace. Verify startup voltage, ripple, and absolute-maximum limits in the complete datasheet because the available product summary does not specify those operating conditions.

Use the 44-pin LQFP footprint defined by the manufacturer and preserve the pin-1 orientation and land pattern exactly. Confirm every multiplexed UART, clock, reset, and I/O assignment before routing. Because this is a multi-pin leaded package, inspect solder-joint consistency and consider lead coplanarity allowances when selecting the assembly process.

Do not treat the OTP program memory as field-programmable Flash. Finalize firmware, boot behavior, calibration constants, and peripheral assignments before production programming, and establish a controlled device-programming workflow. Also verify the suffix-specific temperature grade and qualification of any Z86E2112PSC replacement; matching clock and memory alone does not establish full qualification.

Keep the UART traces short, route them over a continuous reference plane, and avoid coupling them directly to switching-node or high-current edges. Provide a common return path and place interface protection close to the connector. If the controller communicates with an external transceiver, validate logic levels, slew rate, grounding, and bus direction against the relevant interface datasheets.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The indexed product information identifies the manufacturer, package, memory, clock, supply voltage, RAM, I/O count, and UART, but it does not state the requested environmental or material-compliance statuses. AEC-Q100 is not applicable to this general-purpose microcontroller unless a separate automotive-qualified ordering variant is explicitly identified.

Données vérifiées le : 2026-11-17 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

Z86E2112FSC datasheet Z86E2112FSC pinout Z86E2112FSC datasheet pdf Zilog Z86E2112FSC Z86E2112FSC 12MHz microcontroller Z86E2112FSC 8KB OTP Z86E2112FSC LQFP-44 Z86E2112FSC UART controller Z86E2112FSC vs Z86E2112PSC Z86E2112FSC replacement Z86E2112FSC equivalent Z86E2112FSC price

Composants & termes associés

Zilog Z86E2112FSC Z86E2112PSC Z8 microcontroller 8-bit microcontroller embedded controller semiconductor programmable control system one-time-programmable memory 8 KB OTP 236 bytes RAM 12 MHz clock UART 32 I/O pins 44-pin LQFP LQFP package family surface-mount package 5.00 V supply industrial control appliance control instrumentation sensor interface LED sequencer communications equipment
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ