מוצרים (44,000+)

PEX8716-CA80BC - 16-Lane Gen 3 PCIe Switch | Broadcom
PEX8716-CA80BC

PEX8716-CA80BC - 16-Lane Gen 3 PCIe Switch | Broadcom

The Broadcom PEX8716-CA80BC is a 16-lane, four-port PCI Express Gen 3 switch IC packaged in a 324-FCBGA (19 x 19 mm). It provides non-blocking, multi-host PCIe switching for systems that need to fan out, aggregate, or establish peer-to-peer traffic among multiple hosts and endpoints. The ExpressLane architecture supports scalable, high-bandwidth connectivity for server, storage, communications, and graphics platforms. A PCI Express switch is a semiconductor device that routes high-speed serial transactions between a root complex or host and multiple endpoint devices. In the PCI Express hierarchy, it belongs to the interface-controller and connectivity-controller class, combining protocol translation, configurable port routing, lane management, and traffic arbitration. The PEX8716 therefore operates above individual endpoint controllers and below the system fabric that connects processors, adapters, and expansion equipment. The four-port configuration and 16 aggregate lanes allow designers to consolidate several PCIe links through one switching device. This can reduce wiring complexity in multi-host platforms while providing scalable bandwidth for server backplanes, storage fabrics, and communications equipment. Broadcom describes the device as a non-blocking interconnection suitable for fan-out, aggregation, and peer-to-peer traffic patterns. The switch is organized around the Broadcom ExpressLane PCI Express interface technology. Its 324-ball FCBGA package provides a dense, low-inductance interconnect for high-speed signals, while its 19 x 19 mm footprint supports integration into complex boards with high component density. Because the package contains many signal and power balls, successful implementation depends on careful layer assignment, uninterrupted high-speed routing, and compliant power distribution. Typical uses include server-to-storage connectivity, host-to-PCIe-adapter expansion, communications aggregation, and graphics or accelerator systems requiring multiple downstream links. In these applications, the PEX8716 acts as the central routing element for concurrent PCIe traffic rather than as a simple endpoint controller. Its configurable multi-host capability is particularly useful where several computing domains must share bandwidth without relying on a single direct host-to-device relationship. The principal design consideration is PCB implementation quality. Differential PCIe pairs require continuous reference planes, tightly controlled impedance, minimized stub lengths, and appropriate via transitions. Power and ground distribution must also satisfy the device's demanding high-speed and multi-rail requirements. Use the manufacturer datasheet and product overview for the authoritative pin list, electrical limits, reference design, and layout constraints. This product summary combines the verified architecture, package, configuration, application, and sourcing details with engineering-oriented guidance for evaluating the PEX8716-CA80BC. It is intended to help system architects, hardware engineers, and procurement teams determine whether the switch meets their PCIe topology, package, bandwidth, and deployment requirements.

RFQ צור קשר
PEX8717-CA80BC - 16-Lane PCIe Gen 3 Switch | Broadcom
PEX8717-CA80BC

PEX8717-CA80BC - 16-Lane PCIe Gen 3 Switch | Broadcom

Broadcom PEX8717-CA80BC is a PCI Express Gen 3 interface switch IC with 16 lanes and 10 ports, housed in a 324-FCBGA package measuring 19 x 19 mm. It provides multi-host PCI Express switching capability, allowing multiple hosts to connect with their respective endpoints through scalable, high-bandwidth, non-blocking interconnection. The device is positioned for server, storage, communications, graphics, fan-out, aggregation, and peer-to-peer traffic architectures. A PCI Express switch is an interface IC within the broader semiconductor hierarchy. It routes high-speed serial transactions among PCI Express links while coordinating lane-level traffic between upstream hosts, downstream endpoints, and internal switch fabrics. Unlike a simple analog multiplexer, a PCIe switch implements a transactional protocol, manages link training, controls traffic flow, and provides a non-blocking switching fabric designed for concurrent data movement. The PEX8717-CA80BC is identified as a 16-lane, 10-port, PCIe Gen 3 switch. Its principal system-level benefit is the ability to consolidate multiple endpoint relationships behind a scalable switch layer. This architecture can reduce the number of direct host-to-endpoint connections required in complex equipment while preserving concurrent traffic paths. The 10-port configuration also provides substantial fan-out capability for storage, networking, and embedded computing systems. Broadcom describes the PEX 8717 as suitable for multi-host systems requiring high bandwidth and non-blocking interconnection. Multi-host arrangements can place independent computing domains behind a common switching fabric, allowing each host to communicate with its assigned endpoint set. This makes the device relevant to chassis designs, embedded servers, accelerator systems, storage platforms, and communication equipment where several host-to-device paths must coexist. Typical deployments include server backplanes, storage controllers, communications infrastructure, graphics systems, and PCIe aggregation platforms. In these applications, the switch can fan out a host-facing interface toward numerous downstream devices, aggregate endpoint traffic, or support peer-to-peer arrangements. The specific topology, lane allocation, firmware configuration, and signal-integrity implementation must be validated against the Broadcom design documentation for the selected board and connector arrangement. Design integration requires careful attention to the 324-FCBGA land pattern, high-speed differential routing, reference-plane continuity, connector and package escape geometry, power delivery, and thermal performance. Differential pair geometry should remain controlled along the escape path from the switch to board-level connectors or devices. Power and ground planes require uninterrupted return paths because high-speed edge rates can make small discontinuities more consequential than their DC resistance suggests. This page combines Broadcom product information, distributor identification, package details, PCIe interface characteristics, practical deployment guidance, and component-search coverage for engineers evaluating the PEX8717-CA80BC. It also identifies where application-specific electrical, thermal, timing, firmware, and pin-assignment decisions require confirmation from the manufacturer’s authoritative documentation.

RFQ צור קשר
PEX8718-AB80BI - PCIe Gen3 16-Lane 5-Port Switch | Broadcom
PEX8718-AB80BI

PEX8718-AB80BI - PCIe Gen3 16-Lane 5-Port Switch | Broadcom

Broadcom PEX8718-AB80BI is a PCI Express Gen 3 switch integrated circuit with 16 lanes, five ports, and multi-host switching capability in a 324-FCBGA package measuring 19 x 19 mm. It operates at the PCIe Gen 3 data rate of 8.0 GT/s and provides a non-blocking interconnection for systems that need multiple hosts connected to separate endpoints. The switch is positioned for server, storage, and communications platforms requiring scalable PCIe fan-out, aggregation, and peer-to-peer connectivity. A PCI Express switch is a semiconductor that expands one host interface into multiple downstream links and routes traffic among PCIe endpoints. Within the broader hierarchy, it is a PCI Express interface IC, a multiprotocol I/O controller, and a semiconductor designed for high-speed serial interconnect. Unlike a passive PCIe component or a conventional analog switch, the PEX8718 actively manages PCIe transactions and link traffic. Its multi-host architecture allows separate host domains to reach their respective endpoints through a shared switching fabric. The defining characteristics of the PEX8718-AB80BI are its 16-lane configuration, five-port arrangement, and 8.0 GT/s PCIe Gen 3 operation. The Broadcom ExpressLane PEX8718 documentation identifies the device as suitable for scalable, high-bandwidth, non-blocking interconnection. The 324-FCBGA package provides a high pin count suitable for the numerous signal, power, ground, and configuration connections required by a multi-lane switching device. The physical dimensions also support dense server and storage system designs. In a multi-host platform, the switch can fan a set of downstream endpoints out to multiple host connections, aggregate traffic through a common switching point, or support peer-to-peer communication between PCIe devices. Its 16 lanes provide the architectural basis for parallel PCIe links, while the five ports organize those lanes into distinct connectivity roles. The exact lane allocation, port configuration modes, supported device types, power behavior, and electrical limits must be established from the manufacturer’s configuration documentation before schematic or firmware design begins. Typical uses include server consolidation platforms, storage systems, communications equipment, and other PCIe fabrics that benefit from non-blocking multi-host connectivity. The PEX8718-AB80BI is particularly relevant when several computational or storage nodes need deterministic access to PCIe endpoints without implementing every interconnect function in host silicon. A board designer should reserve the package footprint, route high-speed PCIe lanes according to the manufacturer’s reference layout, and provide the required power and configuration resources. The principal design tradeoff is integration versus flexibility. A five-port switch consolidates complex PCIe routing into one fabric controller, but it also requires careful lane mapping, reference-clock design, power delivery, signal-integrity management, and software enumeration. Existing server or storage platforms should confirm support for the PEX8718 before adoption because PCIe switches depend on compatible host controllers, endpoint types, operating-system support, and firmware integration. This product record combines Broadcom product documentation, channel listing details, commercial sourcing guidance, and engineering-focused selection notes. It emphasizes the verified 16-lane, five-port, 8.0 GT/s configuration and clearly separates documented capabilities from parameters that require confirmation in the final design reference, preventing unsupported assumptions about electrical, thermal, or firmware limits.

RFQ צור קשר
PEX8724-CA80BC - 24-Lane PCIe Gen 3 Switch | Broadcom
PEX8724-CA80BC

PEX8724-CA80BC - 24-Lane PCIe Gen 3 Switch | Broadcom

Broadcom PEX8724-CA80BC is a PCI Express switch integrated in a 324-ball FCBGA package measuring 19 x 19 mm. The device provides 24 PCIe lanes, six ports, and an integrated 8.0 GT/s SerDes, making it suitable for systems that require multi-port expansion, multi-host connectivity, or non-blocking PCIe routing between processors, storage, communications equipment, and graphics platforms. Its configurable link width and plug-and-play operation simplify integration into complex PCI Express fabrics. A PCI Express switch is a semiconductor device that expands a limited collection of PCIe lanes into multiple downstream links. It belongs to the interface-controller hierarchy, specifically the PCI Express interface IC and PCIe switch class. Rather than acting as a simple signal buffer, the switch manages lane routing, port configuration, address translation, window mapping, and power-state coordination across connected endpoints. The PEX8724's principal specifications include 24 PCIe lanes, six ports, PCI Express Gen 3 operation, and integrated 8.0 GT/s SerDes. Manufacturer material also identifies configurable link width, non-transparent bridging, address translation, window mapping, plug-and-play behavior, and power-on state management as principal features. These capabilities support flexible fabric layouts where endpoints require independent logical paths while sharing an upstream host interface. Its 324-ball FCBGA construction supports dense high-speed interconnect requirements and provides the necessary electrical and physical scale for a 24-lane switching device. Unlike a conventional bridge limited to a single downstream hierarchy, this switch can fan out traffic among multiple ports. The product overview identifies server, storage, communications, and graphics platforms as representative deployment environments. Typical applications include PCIe expansion enclosures, multi-host server backplanes, storage controllers, external processing systems, high-speed network appliances, and graphics or accelerator systems. In each case, the switch can provide lane bifurcation and independent port routing, provided the board design follows Broadcom's reference layout, power-delivery requirements, signal-integrity rules, and firmware configuration procedures. A successful implementation must account for the complexity of a high-lane-count PCIe switch. Differential pairs require controlled impedance, low-loss routing, reference-plane continuity, and appropriate connector or package escape geometry. Power delivery must support the device across operating states while minimizing switching and high-frequency noise that could affect neighboring circuitry. This product overview combines the manufacturer's PCIe switch capabilities with package, interface, and application information to support early design decisions. It also identifies where application-specific lane mapping, thermal analysis, firmware configuration, and board-layout validation are required before production deployment.

RFQ צור קשר
PEX8725-CA80BC - PCIe Gen 3 Switch | Broadcom
PEX8725-CA80BC

PEX8725-CA80BC - PCIe Gen 3 Switch | Broadcom

The Broadcom PEX8725-CA80BC is a PCI Express Gen 3 switch IC with 24 lanes, 10 ports, and a 324-ball FCBGA package measuring 19 x 19 mm. The device is associated with the Broadcom PEX8725 family, whose configurable ports support x1, x2, x4, x8, and x16 lane widths. Its multiport switching architecture is intended for systems requiring more downstream traffic capacity than upstream capacity. A PCI Express switch is a semiconductor device that connects a host or upstream PCIe endpoint to multiple downstream endpoints. It belongs to the interface-controller hierarchy, where PCIe fabric switching sits above serial interface controllers and below complete computer and networking architectures. By distributing traffic across independently configurable links, such a switch expands endpoint capacity without requiring each endpoint to connect directly to the host complex. The PEX8725 family supports the PCI Express Base Specification Revision 3.0 and is compatible with earlier PCI Express generations. The manufacturer product brief also identifies compliance with Revision 1.2 of the PCI Power Management Specification and Microsoft Vista compatibility. Dynamic link-width control and dynamic SerDes speed control allow link behavior to adapt to system requirements, while access control services support controlled access to PCIe resources. For high-throughput server and switch-fabric applications, the PEX8725 architecture supports packet cut-through with a maximum latency of 132 ns for an x8-to-x8 transfer. Its non-blocking internal switch architecture, large packet memory, and flexible common buffer and flow-control credit pool are designed to sustain full line rate on all ports when the configuration and system conditions support that operating mode. Typical uses include server storage controllers, PCIe expansion systems, accelerator backplanes, network-interface aggregation, and other equipment requiring multiple PCIe endpoints behind one upstream interface. Configuration flexibility allows ports to be assigned lane widths and traffic direction dynamically, making the family suitable for systems that need scalable bandwidth rather than a fixed two-port arrangement. PCB implementation requires careful high-speed signal-integrity work because a 19 x 19 mm FCBGA places power, ground, and high-speed differential contacts on a dense ball-grid footprint. The board stack-up, reference-plane continuity, decoupling network, connector or package escapes, and length matching should be developed together with the device reference design. Thermal planning is also essential because a complex switch IC can dissipate substantial power under sustained full-width traffic. This product record combines the manufacturer family documentation with distributor package and configuration information. It also provides practical application guidance, replacement-selection criteria, and parameter comparisons intended to clarify where the PEX8725 fits in a PCIe switching design.

RFQ צור קשר
PEX8732-CA80BC - 32-Lane PCIe Gen 3 Switch | Broadcom
PEX8732-CA80BC

PEX8732-CA80BC - 32-Lane PCIe Gen 3 Switch | Broadcom

Broadcom PEX8732-CA80BC is a 32-lane, 8-port PCI Express Gen 3 switch with integrated 8.0 GT/s SerDes in a 676-FCBGA (27 x 27 mm) package. It is designed for high-bandwidth systems that need to fan out PCIe connectivity among multiple downstream devices while maintaining a Gen 3-class fabric. The eight-port architecture allows several endpoints to share an upstream host connection without each endpoint requiring a separate root complex. A PCI Express switch is an interface IC that expands one PCIe connection into multiple downstream links. In the signal hierarchy, it belongs to the PCIe interface, interface IC, and semiconductor categories. Its internal fabric coordinates packet routing, lane-width management, flow control, and downstream-port arbitration. This makes the PEX8732-CA80BC relevant to servers, advanced computing systems, storage platforms, and other equipment that must consolidate multiple high-speed peripherals behind a controlled PCIe topology. The Broadcom PEX 8732 is compliant with PCI Express Base Specification Revision 2.0 and is backward compatible with Revision 1.1. Its 32 lanes, eight ports, and integrated 8.0 GT/s SerDes provide the principal headline specifications. Other documented details, including lane-count distribution among ports, maximum power, clocking requirements, supported configurations, and detailed electrical limits, must be confirmed against the Broadcom PEX 8732 documentation before schematic or PCB sign-off. The device implements a multiport PCIe switching architecture rather than a simple passive connector or protocol translator. Such switches can dynamically allocate usable link bandwidth and coordinate access to shared resources. Because PCIe reference-clock, transmitter, receiver, bias, power, and ground connections are highly sensitive, successful deployment depends on preserving the reference design’s layer stack, decoupling strategy, SerDes routing rules, and ball-field connectivity. Typical applications include cloud-computing and advanced-computing platforms, high-density server expansion, storage systems, accelerator enclosures, and consolidated PCIe backplanes. The 32-lane, 8-port organization is especially useful where a system must support numerous endpoints while reducing the number of host-side switch devices. In those systems, switch configuration, port bifurcation, reference clocks, and downstream-card power sequencing become as important as raw data-transfer capability. Designers should treat the 676-FCBGA package as a complex, high-speed mixed-signal design rather than a conventional QFP. Use the manufacturer’s recommended ball map, stack-up, via geometry, high-speed layer transitions, and power-plane distribution without modification. Validate signal integrity, power integrity, thermal performance, firmware configuration, and interoperability using the complete PCIe design checklist. This page consolidates the verified architecture, package, interface-generation, and PCIe compliance facts with practical application guidance, sourcing paths, comparison fields, and design cautions. It also distinguishes direct same-package candidates from alternatives whose complete pin-compatibility record still requires confirmation, helping engineers narrow validation before committing a new board revision.

RFQ צור קשר
PEX8733-CA80BC - 32-Lane Gen 3 PCIe Switch | Broadcom
PEX8733-CA80BC

PEX8733-CA80BC - 32-Lane Gen 3 PCIe Switch | Broadcom

Broadcom PEX8733-CA80BC is a PCI Express Gen 3 interface switch with 32 lanes and 18 ports in a 676-FCBGA package measuring 27 x 27 mm. The device follows PCI Express Base Specification Revision 3.0 and is compatible with PCIe 1.0a, 1.1, and 2.0 devices. It also complies with PCI Power Management Specification Revision 1.2 and supports Access Control Services. A PCI Express switch is a semiconductor device that routes transactions among a host, endpoint devices, and additional PCI Express domains. Positioned within the interface-controller hierarchy, it provides a way to organize multiple PCIe links into a managed switching fabric while preserving protocol compatibility across PCIe generations. The PEX8733 is designed for scalable, high-bandwidth, multi-host interconnection. The switch includes dynamic link-width control and dynamic SerDes speed control. These functions allow the active PCIe link configuration to adapt during operation, which is useful in systems where bandwidth requirements vary according to workload. Additional features include support for Microsoft Vista, although that designation should be considered an older platform compatibility statement rather than a current performance metric. The PEX8733 represents a specialized expansion and aggregation function within PCI Express systems. Its 32-lane, 18-port organization makes it applicable to complex platforms that require more connectivity than a simple endpoint controller can provide. As a Gen 3 switch, it operates within the 8 GT/s generation of PCI Express and can route traffic among compatible downstream devices through its port and lane resources. Typical applications include server and workstation expansion, storage connectivity, accelerator aggregation, external PCI Express enclosure management, and embedded systems that distribute PCIe connectivity across multiple controllers. In each case, the design must account for the physical routing complexity of the 676-ball package and the high-speed signal requirements of PCIe links. A critical integration consideration is PCB layout. The FCBGA package requires dense, controlled-routing escape paths and carefully designed reference planes between the host interface, downstream ports, power distribution, and ground connections. Signal integrity, power integrity, thermal management, and connector topology should be developed together rather than treated as separate layout tasks. This product page consolidates the published lane, port, package, protocol, and management capabilities of the Broadcom PEX8733 with engineering-focused integration guidance. It also distinguishes verified drop-in replacements from generic cross-reference tools, helping designers determine when a PCB redesign is actually required.

RFQ צור קשר
PEX8747-CA80BC - 48-Lane 5-Port PCIe Gen 3 Switch | Broadcom
PEX8747-CA80BC

PEX8747-CA80BC - 48-Lane 5-Port PCIe Gen 3 Switch | Broadcom

Broadcom PEX8747-CA80BC is a 48-lane, 5-port PCI Express Gen 3 switch IC developed on 40 nm technology and packaged in a 676-FCBGA (27 x 27 mm) surface-mount package. It is designed for multi-host PCI Express systems requiring scalable, high-bandwidth, non-blocking interconnection between a host and multiple endpoints. The device supports PCIe Gen 3 operation at 8 GT/s and is optimized for high-resolution graphics, peer-to-peer traffic, and multicast workloads. What is a PCI Express switch IC? A PCIe switch is a multiport interface semiconductor that fans out a host PCI Express link to multiple endpoint devices. It provides packet routing, traffic management, buffering, and downstream-port connectivity within one system. In the broader computing hierarchy, the PEX8747 belongs to the PCI Express switch family, interface IC category, semiconductor class, and data-center or workstation interconnect ecosystem. Unlike a simple endpoint controller, this device manages multiple high-speed lanes and can place several graphics, storage, or accelerator devices behind one host connection. The PEX8747 provides 48 PCI Express lanes across five ports. Broadcom describes the architecture as a non-blocking interconnect suitable for demanding platform topologies, including multi-host configurations and peer-to-peer communication. The 40 nm process supports a high integration level for a large switching device, while the 676-ball FCBGA provides the fine interconnect density needed for high-speed differential signaling. The switch is intended for system-level designs where board area, bandwidth, and downstream-device expansion must be balanced. Typical applications include GPU servers, high-end graphics workstations, NVMe storage aggregation, FPGA accelerator platforms, industrial visualization systems, and embedded computing platforms with multiple PCIe endpoints. The device is especially relevant when a system requires more downstream connectivity than a root complex can economically provide directly. Its lane count and port count allow designers to consolidate endpoint traffic while preserving independent PCIe paths. For implementation, treat the PEX8747 as a complex high-speed interface IC rather than a simple analog component. The board design must use the manufacturer’s recommended ball assignments, reference design, power-delivery network, clocking approach, and low-loss routing rules. Validate insertion loss, return loss, reference-clock quality, connector and trace geometry, and system-level reset or enumeration behavior in the final board environment. This page distinguishes the PEX8747 from adjacent PCI Express switch models, highlights confirmed manufacturer specifications, and identifies same-family ordering variants that may be relevant for sourcing. It also emphasizes that a PCI Express switch’s suitability depends on lane-to-port allocation, firmware, reference design, signal integrity, and thermal performance rather than lane count alone.

RFQ צור קשר
PEX8747-CA80FBCG - 48-Lane 5-Port PCIe Gen 3 Switch | Broadcom
PEX8747-CA80FBCG

PEX8747-CA80FBCG - 48-Lane 5-Port PCIe Gen 3 Switch | Broadcom

The Broadcom PEX8747-CA80FBCG is a 48-lane, 5-port PCI Express Gen 3 switch with multi-host switching capability, operating at 8.0 GT/s per lane and manufactured on a 40 nm process. It is offered in a 575-ball BGA surface-mount package and is designed for high-bandwidth, non-blocking interconnect between host systems and graphics or accelerator endpoints. A PCI Express switch is a semiconductor device that functions as a multi-port bridge within a PCIe hierarchy. It belongs to the PCI Express interface controller family, which sits between computer buses and peripheral devices. By providing multiple downstream ports, a PCIe switch can expand one host interface into several endpoint connections without requiring a separate host bridge for every downstream device. The PEX8747 is specifically optimized for scalable multi-host and high-resolution graphics traffic. The device provides 48 PCIe lanes across five ports and supports PCIe Gen 3 operation at 8.0 GT/s. Its architecture is intended to preserve non-blocking data movement, support peer-to-peer transfers and multicast traffic, and connect hosts with their associated endpoints. The 40 nm process implementation and 575-ball BGA package support dense, high-speed server and workstation designs where routing margin and thermal performance are important layout constraints. Multi-host capability is the principal differentiator of this switch family. A single PEX8747 can organize several host-to-endpoint paths, making it suitable for platforms that combine graphics, computation, or storage-oriented endpoint devices. Its lane and port organization must be matched carefully to the system topology because the number of lanes assigned to each downstream port determines the bandwidth available to that endpoint. The PEX8747 is appropriate for server enclosures, multi-GPU systems, high-end graphics platforms, and other equipment requiring a scalable PCIe fabric. Compared with a simple endpoint device or a one-port bridge, the PEX8747 consolidates switching, lane management, and multi-host routing into a single integrated component. Layout is the main practical challenge for this package. Differential high-speed pairs, reference clocks, auxiliary power rails, and ground-return paths must be routed according to the manufacturer's reference design. Keep the switch's thermal vias and power-distribution network within the layout constraints specified for the 575-ball BGA, and validate complete channel designs with the manufacturer's signal-integrity and power-integrity tools. This page combines the confirmed PEX 8747 product characteristics, package information, application guidance, and a strict review of available drop-in alternatives. It also documents where a PCB or platform redesign is required instead of implying that functionally similar PCIe devices are pin-compatible replacements.

RFQ צור קשר
PEX8748-CA80BC - 48-Lane Gen 3 PCIe Switch | Broadcom
PEX8748-CA80BC

PEX8748-CA80BC - 48-Lane Gen 3 PCIe Switch | Broadcom

Broadcom PEX8748-CA80BC is a PCI Express Gen 3 switch IC with 48 lanes and 12 ports in a 676-pin FCBGA package measuring 27 x 27 mm. It provides multi-host switching for servers, storage, communications, and graphics platforms, supporting configurable fan-out, aggregation, and peer-to-peer interconnection. The documented typical power consumption is 8.0 W. A PCI Express switch is a semiconductor device that routes high-speed serial lanes between one host or upstream connection and multiple downstream endpoints. Within the interface hierarchy, the PEX8748 is a PCI Express interface IC, network-interface switch, and multi-host fabric controller. It provides non-blocking, high-bandwidth connectivity while allowing multiple PCI Express domains to share switching resources. The PEX8748 combines 48 Gen 3 lanes with 12 configurable ports. This lane-to-port arrangement supports dense server and storage topologies that require more fan-out than a conventional endpoint controller. Its FCBGA-676 package integrates a large number of high-speed differential I/O connections into a compact 27 x 27 mm area, making careful ball assignment, reference-plane continuity, and thermal design essential. The switch is intended for PCIe Gen 3 fabrics spanning multiple hosts and endpoints. Its non-blocking architecture is suited to server consolidation, storage aggregation, communications equipment, and graphics platforms. Configuration flexibility also supports peer-to-peer arrangements and failover topologies, allowing redundant paths or workload distribution across multiple downstream devices. Typical uses include high-performance computing servers, AI inference platforms, NVMe storage fabrics, GPU acceleration systems, and industrial communication equipment. The 48-lane capacity and 12-port configuration are particularly useful where many PCIe endpoints must converge through a shared switching fabric without relying on separate host-to-endpoint switching paths. The main design trade-off is thermal and routing complexity. An 8.0 W typical-power device in a 27 x 27 mm FCBGA requires a multilayer PCB with an uninterrupted ground plane, carefully controlled high-speed impedance, and a thermal strategy suited to sustained compute workloads. The package also requires a 676-ball PCB footprint and exact land-pattern compliance; board changes are not practical after layout release. This product page consolidates the verified electrical identity, package information, multi-host application role, comparable switch families, and practical implementation considerations for engineers evaluating the Broadcom PEX8748-CA80BC for dense PCIe Gen 3 systems.

RFQ צור קשר
PEX8750-AB80BI - 48-Lane PCIe Gen 3 Switch | Broadcom
PEX8750-AB80BI

PEX8750-AB80BI - 48-Lane PCIe Gen 3 Switch | Broadcom

Broadcom PEX8750-AB80BI is a PCI Express Gen 3 multi-host switching controller with 48 lanes, 12 ports, and an 8.0 GT/s signaling rate, supplied in a 676-ball BGA surface-mount package. The device supports scalable, non-blocking PCIe connectivity for systems that need to connect multiple hosts or endpoints through a centralized switching fabric. A PCI Express switch is an integrated circuit that routes high-speed serial transactions between multiple PCIe devices, hosts, or downstream ports. Within the broader semiconductor hierarchy, the PEX8750 belongs to the PCI interface controller family, the PCIe switch family, and the broader class of interface ICs. Its multi-host architecture helps equipment designers create flexible server, storage, networking, and communications platforms without requiring a separate switch device for every topology. The principal specifications are 48 PCIe lanes, 12 ports, and PCI Express Gen 3 operation at 8.0 GT/s. Broadcom documents the device as a fan-out, aggregation, and peer-to-peer interconnection solution with non-blocking switching capability. Its BGA-676 package supports dense integration on multilayer printed circuit boards, while its specified operating-temperature range of -40°C to +85°C covers industrial and commercial system environments. The multi-host architecture is particularly important when several processor or accelerator domains must communicate through shared PCIe endpoints. A 48-lane switch fabric can aggregate bandwidth and reduce the number of physical interconnect paths required in a platform. At the same time, design complexity increases because each host, endpoint, reference clock, auxiliary power rail, reset domain, and lane assignment must be coordinated through the device configuration and system firmware. Typical PEX8750 applications include server backplanes, storage systems, rack-mounted communications equipment, and accelerator platforms. Fan-out configurations distribute a host or switch port toward multiple endpoints, while aggregation configurations collect traffic from several downstream devices before forwarding it upstream. Peer-to-peer arrangements allow two host domains to exchange traffic through the same PCIe switching fabric. For new PCB designs, allocate the BGA-676 land pattern, reference-clock routing, power distribution, and high-speed differential channels according to the Broadcom layout guidance. Validate connector reach, insertion loss, crosstalk, AC coupling, reset behavior, and firmware interoperability on the complete system rather than treating the switch as a conventional low-speed IC. This product page organizes the documented lane count, port count, signaling rate, package, environmental limits, application roles, and sourcing considerations into an engineering-focused guide. It also distinguishes the switch from generic analog switches and clarifies the verified boundaries of drop-in replacement options for this large BGA device.

RFQ צור קשר
PEX8764-AB80BI - 64-Lane PCIe Gen 3 Switch | Broadcom
PEX8764-AB80BI

PEX8764-AB80BI - 64-Lane PCIe Gen 3 Switch | Broadcom

Broadcom PEX8764-AB80BI is a PCI Express Gen 3 multi-root switch IC with 64 lanes, 16 ports, and an 8.0 GT/s data rate, packaged in a 1156-FCBGA (35x35 mm). It is designed for systems that need high-bandwidth, non-blocking PCIe connectivity between multiple hosts and endpoints. A PCI Express switch is a semiconductor device that routes PCI Express traffic between a host or multiple hosts and peripheral endpoints. The PEX8764 belongs to the PCI Express switch family within the broader interface-IC and semiconductor hierarchy. Its multi-host architecture supports server, storage, communications, fan-out, aggregation, and peer-to-peer interconnect applications. The device provides 64 PCIe lanes across 16 ports, allowing high-density connectivity in systems with multiple expansion devices. Its Gen 3 operation at 8.0 GT/s is intended for bandwidth-intensive platforms such as data-processing equipment, network appliances, and storage systems. The 1156-FCBGA package provides a high pin count suitable for a complex switching device and requires careful PCB layout and thermal management. Broadcom positions the PEX8764 as a scalable PCIe switching solution for connecting multiple hosts to their respective endpoints. This architecture can reduce contention compared with sharing a single host resource, while a non-blocking switch fabric is intended to maintain efficient communication among connected devices. Exact lane-to-port assignments, electrical details, programming requirements, and operating limits should be confirmed in the manufacturer datasheet. Typical uses include PCIe server backplanes, storage controllers and expanders, communications platforms, data-center equipment, and peer-to-peer systems in which several PCIe devices require coordinated traffic routing. The component is also appropriate for equipment requiring a larger PCIe fan-out than a conventional endpoint controller provides. The primary design consideration is PCB implementation. A 1156-FCBGA device needs a controlled escape-routing strategy, careful power and ground-plane distribution, and attention to high-speed signal integrity. Thermal design should include the package heat spreader or exposed thermal structure described in the datasheet, with adequate copper and airflow for the expected operating environment. This page organizes the PEX8764-AB80BI’s PCIe Gen 3 architecture, package information, application roles, comparison points, and design considerations into a compact engineering reference for platform and sourcing teams.

RFQ צור קשר
PEX8780-AB80BI - 80-Lane PCIe 3.0 Switch | Broadcom
PEX8780-AB80BI

PEX8780-AB80BI - 80-Lane PCIe 3.0 Switch | Broadcom

Broadcom PEX8780-AB80BI is an ExpressLane PCI Express Gen 3 switching IC with 80 lanes, 20 ports, and an 8.0 GT/s per-lane signaling rate. It provides multi-host PCIe switching in a high-density FCBGA package for systems that need scalable, non-blocking interconnection between multiple hosts and their endpoint devices. The device is intended for advanced server, storage, and communications platforms. A PCI Express switch is a semiconductor in the Interface ICs category that routes high-speed lane traffic between a host bus and multiple endpoints. The PEX8780 sits within the PCIe fabric hierarchy, where switching fabric, protocol conversion, clocking, and flow control work together to preserve transactional and data-transfer performance. Its 80-lane, 20-port architecture supports fan-out, aggregation, and peer-to-peer topologies rather than a simple point-to-point link. The Gen 3 operating rate provides 8.0 GT/s signaling per lane, while the large lane count allows high-bandwidth endpoints to be distributed across multiple ports. Multi-host capability lets separate host domains connect to their respective endpoints through one switching device. This architecture can reduce board-level switch counts, improve topology flexibility, and support scalable server or storage interconnections when the system design, firmware, and electrical implementation are properly configured. Broadcom describes the PEX8780 as a scalable, high-bandwidth, non-blocking PCIe interconnect. Its switching resources are intended to support multiple concurrent communication paths, making it appropriate for systems in which aggregate throughput and predictable routing matter more than minimizing silicon cost or package size. The exact lane allocation among ports and downstream configurations depends on the selected operating mode and reference design. Typical uses include server backplanes, storage systems, communications platforms, PCIe expansion equipment, and peer-to-peer processing systems. The PEX8780 is particularly relevant when a platform must connect multiple compute hosts to dedicated accelerators, storage controllers, network interfaces, or other PCIe endpoints while preserving independent traffic paths and flexible downstream bandwidth allocation. Board integration requires careful signal-integrity and power planning for a large, high-speed switch in a fine-pitch ball-grid-array package. Differential pairs, reference-plane continuity, connector or package-transition geometry, decoupling, power sequencing, and thermal management must follow Broadcom's published layout and reference-design guidance. Signal-integrity validation should include insertion loss, return loss, crosstalk, jitter, and eye-margin analysis across the intended operating conditions. This page combines Broadcom product facts with application guidance, engineering design notes, comparison parameters, and substitution constraints. It focuses on the practical decisions an integrator must make when integrating an 80-lane, 20-port PCIe Gen 3 switching platform into a high-bandwidth server, storage, or communications system.

RFQ צור קשר
PEX88096B0-DB - 96-Lane PCIe 4.0 Switch | Broadcom | Storage
PEX88096B0-DB

PEX88096B0-DB - 96-Lane PCIe 4.0 Switch | Broadcom | Storage

The Broadcom PEX88096B0-DB is a 96-lane PCI Express 4.0 managed switch from the PEX88000 series, delivered in a 1550-ball BGA package (37.5 x 42.5 mm) optimized for high-density storage and fabric applications. It provides 48 downstream ports and supports up to 98 solid-state drives through fan-out switching, while operating at the full PCIe 4.0 data rate of 16 GT/s per lane. A PCI Express (PCIe) switch is a high-speed serial fabric device that expands a single root-complex link into many endpoint links, enabling fan-out topologies in servers, storage arrays, and accelerator platforms. PCIe 4.0 is the fourth generation of the PCI Express standard, doubling the per-lane bandwidth of PCIe 3.0 to 16 GT/s. As a managed switch, the PEX88096 supports advanced features such as hot-plug, surprise-down recovery, dynamic port bifurcation, and Spread Spectrum Clocking (SSC) isolation, which are essential for enterprise storage and NVMe deployments. Key features include 96 total PCIe 4.0 lanes with 48 configurable downstream ports, integrated DMA and I/O virtualization support, hot-plug capability on every port, advanced error reporting (AER), and Broadcom's proprietary chip-link diagnostics. The device supports bifurcation configurations such as x4, x8, x16 per port and provides per-port signal-integrity tuning for reliable operation across long backplane traces. The 1550-ball BGA exposes a wide SERDES and sideband I/O complement suitable for adapter cards, backplanes, and custom ASIC/FPGA co-designs. Architecturally, the PEX88096B0 uses a non-blocking cut-through switching fabric with per-port credit-based flow control, multi-queue VC support, and a 32-bit MCU management interface. It is firmware-compatible with the broader PEX88000 family (including the PEX88064, PEX88080, and PEX88128), allowing OEMs to scale port count and lane count on a single software platform. Typical applications include NVMe SSD JBOD enclosures with 96+ drives, composable disaggregated storage fabrics, GPU/CPU accelerator pooling backplanes, hyperscale data-center storage tiers, and PCIe fan-out adapter cards. Both active and low-power standby states are exposed, making the device usable in dense thermal envelopes where chassis airflow is constrained. When designing with the PEX88096B0-DB, allocate at least six PCB layers with impedance-controlled 85 ohm differential SERDES routing, a dedicated reference clock distribution network with SSC support, and provide thermal management through the central heat-spreader pad. The on-chip microcontroller requires an external SPI flash for firmware boot.

USD $1,145.00 במלאי
PEX90144 - 144-Lane PCIe Gen6 Switch | Broadcom | AI
PEX90144

PEX90144 - 144-Lane PCIe Gen6 Switch | Broadcom | AI

The Broadcom PEX90144 is a 144-lane PCI Express 6.0 packet switch built on a 5nm process, part of the Broadcom ExpressFabric PCIe switching family. It supports port widths of 2, 4, 8, or 16 lanes and delivers up to 256GB/s of bidirectional raw bandwidth per x16 port, with up to 9.2Tb/s of raw bandwidth achievable through the device in its largest configuration. A PCIe switch is a fabric device that expands a single root-complex PCI Express link into multiple downstream endpoints, aggregating GPU, NIC, storage controller, and accelerator traffic. In the system hierarchy, it sits between the host CPU root port and the endpoint tier, and is a core building block of modern data center interconnect fabrics alongside CPU PCIe controllers and retimers. Key differentiating features include hardware multi-host support for sharing the switch fabric across several hosts, an in-house Broadcom SerDes PHY exceeding 36dB of performance margin at Gen6 PAM-less NRZ data rates, and an embedded PCIe protocol analyzer for in-system debug without external interposer hardware. Turnkey fabric management software simplifies bring-up and topology configuration for large racks. Architecturally, the 5nm CMOS process integrates the SerDes, packet-routing fabric, and management engines on a single die, keeping per-lane power low while sustaining Gen6 64GT/s signaling. The device scales above its siblings, sitting as the widest device in Broadcom's published PCIe Gen6 switch lineup, which also includes 104-lane and 88-lane configurations. Typical applications include AI rack-scale connectivity between host CPUs and GPU accelerators, high-density server PCIe expansion chassis, composable and disaggregated infrastructure, and NVMe storage fabrics. It was publicly demonstrated integrated into a Dell PowerEdge XE7745-style PCIe board at SC25. Design consideration: at this bandwidth scale, signal-integrity planning for Gen6 64GT/s channels, substrate stack-up, and thermal design for the large BGA package are critical; consult the Broadcom PEX90000 series product brief for validated topologies. This page synthesizes distributor availability, family cross-references, and practical design guidance not found in the manufacturer datasheet.

RFQ צור קשר
PGA206UA - 5MHz FET-Input Programmable Gain In-Amp | TI
PGA206UA

PGA206UA - 5MHz FET-Input Programmable Gain In-Amp | TI

The Texas Instruments PGA206UA is a high-speed digitally programmable gain instrumentation amplifier (PGA) delivering a 5 MHz bandwidth, 100 pA maximum FET-input bias current, and digitally selectable gains of 1, 2, 4, and 8 V/V in a 16-pin SOIC (SOL-16) surface-mount package. A programmable gain instrumentation amplifier is a precision differential amplifier whose closed-loop gain is set by digital control inputs rather than external resistors. It sits within the amplifier hierarchy as an instrumentation amplifier -> precision op amp -> analog front-end (AFE) -> signal chain IC, combining a true three-architectural-input instrumentation amplifier front end with internally switched gain networks. PGAs are essential in data acquisition systems where a single amplifier must handle sensor signals spanning several orders of magnitude without manual range switching. Key features include fast settling to 0.01% after a gain change, +/-40V input protection that survives overrange faults common in industrial field wiring, and a low maximum offset voltage of 1.5 mV. The FET input stage keeps bias current at 100 pA max, preserving accuracy with high-impedance sources such as pH probes, photodiodes, and piezoelectric sensors. Technically, the PGA206 uses internally switched precision resistor networks controlled by two digital gain-select lines, a scheme the datasheet notes pairs naturally with an external logic latch to acquire gain data from a high-speed digital bus. Slew rate is 25 V/us and the supply range is +/-4.5V to +/-18V, allowing operation from standard +/-5V, +/-12V, or +/-15V analog rails. Operation is specified from -40C to +85C. Typical applications include multi-range data acquisition front ends, programmable sensor interfaces, test and measurement instrumentation, and dynamic signal conditioning where gain must change on-the-fly between measurements. Design consideration: total response time after a gain change equals the switching time plus the settling time to the new output voltage, so budget for settling in high-throughput scanning systems. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ צור קשר
PGA207UA - 5MHz Programmable Gain Instrumentation Amp | TI
PGA207UA

PGA207UA - 5MHz Programmable Gain Instrumentation Amp | TI

The Texas Instruments PGA207UA is a high-speed digitally programmable gain instrumentation amplifier offering a 5 MHz bandwidth, 100 pA maximum FET-input bias current, and digitally selectable gains of 1, 2, 5, and 10 V/V, housed in a 16-pin SOIC (SOL-16) surface-mount package. A programmable gain instrumentation amplifier (PGIA) is a precision differential amplifier whose closed-loop gain is set digitally rather than by external resistors. In the signal-chain hierarchy it sits between sensors and data converters, combining the true instrumentation-amplifier input stage (high common-mode rejection, balanced high-impedance inputs) with gain-switching logic, so a single ADC channel can resolve signals spanning several orders of magnitude. Key features of the PGA207 include two CMOS/TTL-compatible address lines for gain selection, analog inputs internally protected against overloads up to +/-40V even with the supplies off, and laser-trimmed offset voltage for low drift. A fast 0.01% settling specification allows the gain to be switched between conversions in high-throughput data-acquisition systems without dead time. Architecturally, the device uses a three-amplifier instrumentation topology with FET input transistors, giving negligible input bias current (100 pA max) for high-source-impedance sensors, a 25 V/us slew rate, and 18 nV/sqrt(Hz) input noise with 75 dB CMRR. Laser trimming at the Burr-Brown production line holds offset voltage to 1.5 mV max, preserving accuracy at the lowest gains. Typical applications include programmable data-acquisition front ends, dynamic signal ranges from PT100 sensors and strain-gauge bridges, test and measurement instrumentation, and industrial process-control analog front ends feeding 12- to 16-bit ADCs. When designing, remember the gain lines are logic-level inputs: tie them to clean CMOS/TTL levels and route away from the input traces. The +/-40V input protection removes the need for external clamp diodes in most industrial environments. This page consolidates distributor pricing, drop-in family alternatives, and engineering design guidance not found in a single manufacturer datasheet page.

RFQ צור קשר
PGA207UA/1K - 5MHz Programmable Gain In-Amp | Texas Instruments
PGA207UA/1K

PGA207UA/1K - 5MHz Programmable Gain In-Amp | Texas Instruments

The Texas Instruments PGA207UA/1K is a high-speed, digitally programmable gain instrumentation amplifier delivering gains of 1, 2, 5, and 10 V/V with a 5 MHz bandwidth, a FET input stage with 100 pA maximum bias current, and a 16-pin SOL-16 SOIC surface-mount package. A programmable gain instrumentation amplifier (PGIA) is a precision differential amplifier whose closed-loop gain is set digitally rather than by external resistors. Within the signal-chain hierarchy, it sits between raw transducers and ADCs as a front-end conditioning device, combining the high input impedance and CMRR of a true three-op-amp instrumentation amplifier with gain-switching logic that lets one device serve multiple transducer full-scale ranges. Key features of the PGA207UA/1K include digitally selectable gains (1, 2, 5, 10 V/V) via two CMOS/TTL-compatible address lines, fast settling to 0.01%, a FET input with maximum bias current of 100 pA, and internal input protection rated for plus/minus 40V overloads even with power supplies off. The device is laser-trimmed for low offset voltage (1.5 mV max) and low drift, eliminating manual calibration in most data acquisition designs. Technically, the PGA207 architecture uses a true instrumentation amplifier input stage whose gain is switched by the two digital address lines, so no external gain resistors are needed and gain accuracy is factory-determined. The 5 MHz bandwidth at higher gains supports multiplexed data acquisition channels, while the FET input minimizes loading on high-impedance sources such as photodiodes and piezoelectric sensors. Supply operation spans plus/minus 4.5V to plus/minus 18V, with a slew rate of approximately 25 V/us. Typical applications include multiplexed data acquisition front ends, programmable test and measurement signal conditioning, and industrial sensor interfaces where input channels of different amplitude must share one ADC. Fast settling allows channel-to-channel switching without long dead time, improving system throughput. Design consideration: ensure supply headroom within the plus/minus 4.5V to plus/minus 18V range and route the digital gain-select lines away from the high-impedance inputs to prevent digital noise coupling into the analog front end. This page synthesizes distributor pricing, drop-in family alternatives, comparison data, and practical design notes not found in the manufacturer datasheet.

RFQ צור קשר
PGA281 - Zero-Drift Programmable Gain Instrumentation Amplifier | TI
PGA281

PGA281 - Zero-Drift Programmable Gain Instrumentation Amplifier | TI

The PGA281 is a high-precision instrumentation amplifier from Texas Instruments featuring digitally-controllable gain and signal-integrity test capability. It uses proprietary autozeroing techniques to achieve low offset voltage, near-zero offset and gain drift, excellent linearity, and nearly no 1/f noise. The device is available in a 16-pin TSSOP package (PW) and operates over a wide supply range, making it suitable for precision sensor interfaces and data acquisition systems. An instrumentation amplifier (INA) is a type of differential amplifier that amplifies the difference between two input signals while rejecting common-mode voltages. It is characterized by high input impedance, high common-mode rejection ratio (CMRR), and low offset voltage. The PGA281 belongs to the family of programmable gain instrumentation amplifiers (PGIAs), which allow the gain to be set digitally or via external resistors, providing flexibility in signal conditioning chains. This category sits within the broader hierarchy of analog amplifiers, which are essential building blocks in electronic systems for signal conditioning and measurement. Key features of the PGA281 include gain programmable from G = 0.2 to 10,000 using an external resistor, fully differential outputs with integrated clamping, low offset voltage of 10 µV (typ) and 35 µV (max), low offset drift of 0.1 µV/°C (typ) and 0.3 µV/°C (max), and low input bias current of 5 pA (typ). These specifications make it ideal for high-accuracy applications where drift and noise are critical. The PGA281 employs a zero-drift architecture that continuously corrects offset and drift, achieving near-zero temperature coefficients. The integrated clamping circuitry protects the outputs from overvoltage conditions, enhancing system robustness. The device supports a wide supply range, typically ±5V, and provides rail-to-rail output swing, maximizing dynamic range. Typical applications include precision current sensing (10 µA to 100 mA), sensor signal conditioning for bridge sensors, thermocouple amplifiers, and data acquisition front-ends. Its low offset and drift make it suitable for medical instrumentation, industrial process control, and test and measurement equipment. When designing with the PGA281, ensure proper decoupling of the power supply pins and consider the thermal performance of the TSSOP package. The gain-setting resistor should be a precision resistor to maintain gain accuracy. The device's signal-integrity test capability allows for system-level diagnostics, which is valuable in safety-critical applications.

RFQ צור קשר
PGA309AIPWR - Programmable Sensor Conditioner | TI | 16-TSSOP
PGA309AIPWR

PGA309AIPWR - Programmable Sensor Conditioner | TI | 16-TSSOP

The PGA309AIPWR from Texas Instruments is a voltage output programmable analog signal conditioner designed specifically for resistive bridge sensors. It integrates a precision analog signal path with digital calibration capabilities, enabling correction of zero, span, zero drift, span drift, and sensor linearization errors. Housed in a 16-pin TSSOP (PW) package, this device operates over a temperature range of -40°C to +125°C, making it suitable for industrial and automotive environments. A programmable sensor conditioner is an integrated circuit that amplifies and calibrates the small differential output of a bridge sensor, such as a strain gauge or pressure sensor, converting it into a linear, temperature-compensated voltage output. It sits between the sensor and the ADC or microcontroller, forming a complete sensor signal chain. This category falls under sensor interface ICs within the broader analog signal processing domain. Key features include a programmable gain amplifier (PGA) with adjustable gain, a digital-to-analog converter (DAC) for offset and span calibration, and an internal temperature sensor for drift compensation. The device supports a supply voltage up to 5.5V and provides a ratiometric or absolute voltage output. Its digital interface allows in-system calibration via a two-wire serial interface, simplifying production trimming. The PGA309 employs a chopper-stabilized amplifier architecture to achieve low offset and drift, ensuring high accuracy over temperature. The integrated calibration engine uses look-up tables to linearize the sensor response, reducing the need for external components. This architecture provides a complete, factory-calibrated solution that minimizes assembly cost and improves yield. Typical applications include industrial pressure transmitters, automotive manifold absolute pressure (MAP) sensors, and precision weigh scales. The device's wide temperature range and programmable features make it ideal for harsh environments where sensor accuracy is critical. When designing with the PGA309AIPWR, ensure proper decoupling of the supply pins and careful layout of the analog input traces to minimize noise. The calibration coefficients should be stored in an external EEPROM, as the device does not have non-volatile memory on-chip.

RFQ צור קשר
PI2DBS212ZHEX - 2-Channel Broadband Switch | Diodes
PI2DBS212ZHEX

PI2DBS212ZHEX - 2-Channel Broadband Switch | Diodes

The Diodes Incorporated PI2DBS212ZHEX is a 2-channel differential broadband switch IC with a stated 1.2 V to 1.8 V single-supply range and a 28-pin TQFN package measuring 3.5 mm by 5.5 mm. It is categorized as a special-purpose analog switch and is intended for telecommunications signal routing. The verified distributor results also identify it as a dual 1:2 analog multiplexer, indicating that each channel can route a signal between multiple paths. An analog switch is a semiconductor-controlled routing element that connects or isolates circuit nodes with relatively low impedance in the selected state. In the broader hierarchy, this PI2DBS212ZHEX is a special-purpose analog switch, then an interface IC, then a semiconductor. Broadband switches are used where a signal must reach different downstream circuits with controlled insertion loss, isolation, and switching behavior. Their performance depends on supply voltage, signal amplitude, frequency, control logic, layout parasitics, and the impedance of the connected network. The PI2DBS212ZHEX is specified for single-supply operation from 1.2 V to 1.8 V. Two channels and differential broadband routing are its principal verified functional characteristics. The 28-TQFN package supports compact surface-mount layouts, while the exposed pad, where applicable, provides a thermal connection to the PCB. The available distributor snippets do not provide verified insertion loss, bandwidth, on-resistance, off-isolation, leakage, switching time, control thresholds, or absolute maximum ratings, so those values remain unavailable in this data set. Telecommunications equipment is the clearest fit because the manufacturer and DigiKey classify the device as a telecommunications switch. It may also be evaluated for broadband test paths, routing networks, and communication modules when its complete electrical limits satisfy the system requirements. The low 1.8 V upper supply limit is important: downstream circuitry must remain compatible with this range, and signal amplitudes must not exceed verified device limits that are not present in the supplied records. PCB implementation should follow the manufacturer pinout and land pattern once the official datasheet is obtained. Place power and ground connections directly to their assigned pins, keep high-frequency switched traces short, and minimize copper around sensitive routing nodes. Because exact pin names, control timing, and electrical characteristics are unavailable, a board should not be released for production until those details are verified against the official PI2DBS212 datasheet. This product record consolidates verified distributor identification, sourcing information, and design caveats while clearly separating known facts from missing technical data. It is intended to support early component selection, quotation requests, and engineering follow-up rather than replace the manufacturer datasheet or a completed signal-integrity evaluation.

RFQ צור קשר
PI2USB4122ZHEX - USB 3.2 Gen 1 4:1 Mux/DeMux Switch | Diodes Inc
PI2USB4122ZHEX

PI2USB4122ZHEX - USB 3.2 Gen 1 4:1 Mux/DeMux Switch | Diodes Inc

The Diodes Incorporated PI2USB4122ZHEX is a high-performance USB 3.2 Gen 1 (formerly USB 3.0) 4:1 mux/demux switch IC housed in a 42-TQFN (9x3.5 mm) package with an exposed thermal pad. The device supports four differential channels that can be routed between one USB Type-C/USB 3.0 port and four possible source/sink endpoints, enabling switching of SuperSpeed USB (5 Gbps) signals with minimal insertion loss and return loss across the full USB 3.2 Gen 1 frequency spectrum. A USB switch (also called a USB mux/demux or USB crossbar switch) is a high-speed analog multiplexer designed to route USB 2.0 and SuperSpeed USB signals between multiple physical connectors or controllers while preserving signal integrity. As a category, USB switches sit within the broader hierarchy of analog switches and multiplexers -> signal switches -> interface ICs -> semiconductors. They are essential building blocks in any system that must share limited USB ports among multiple functions (charging, data, audio, debug), and they sit electrically downstream of the USB PHY and upstream of the physical connector. PI2USB4122 is the second-generation Diodes Inc. offering in this category and operates from a single 1.8 V supply rail, simplifying integration into modern low-voltage SoCs. Key differentiating features include 5 Gbps SuperSpeed USB channel support, low 5 ohm typical on-resistance per channel, -3 dB bandwidth exceeding 2.5 GHz to preserve USB 3.2 Gen 1 eye margins, 1.8 V single-supply operation, and integrated sideband/USB 2.0 pass-through routing. The exposed thermal pad on the TQFN package keeps the die-to-ambient thermal resistance low enough for hot-plug events without derating. The PI2USB4122 uses a wide-bandwidth CMOS pass-gate architecture with adaptive biasing to maintain flat frequency response up to 2.5 GHz. Internal ESD protection exceeds 2 kV HBM on the high-speed data lines, reducing external TVS diode count. The control logic accepts standard GPIO inputs for channel selection, allowing direct connection to a USB Type-C port controller without an external I/O expander. Typical applications include USB Type-C port multiplexers in laptops, tablets and docking stations, smartphone fast-charge/data switching paths, USB 3.0 hubs with multiple upstream ports, and Thunderbolt/USB4 sideband routing. The exposed-pad TQFN package makes it suitable for both handheld and dock designs where PCB real estate is constrained. When designing with this part, note the NRND (Not Recommended for New Design) status - the family remains in production for existing platforms but new designs should evaluate the PI3USB4122 or PI3USB31432 successors. Decoupling must include a 0.1 uF X7R cap on VCC placed within 2 mm of the exposed pad, and the high-speed differential pairs require 85 ohm differential impedance with matched trace lengths within the data-sheet tolerance window. This page synthesizes distributor pricing across DigiKey, Mouser, Arrow and LCSC, drop-in alternative candidates from the same Diodes Inc. family, and practical design notes drawn from the manufacturer datasheet - information not aggregated on any single distributor site.

RFQ צור קשר
PI3DBS16213XEAEX - PCIe Gen 4 MUX 12GHz Switch | Diodes Inc
PI3DBS16213XEAEX

PI3DBS16213XEAEX - PCIe Gen 4 MUX 12GHz Switch | Diodes Inc

The Diodes Incorporated PI3DBS16213XEAEX is a 2-channel, 3:1 PCIe Gen 4 multiplexer/switch IC that routes high-speed differential signals between a single common port and three separate downstream paths, delivering up to 12 GHz of -3 dB bandwidth for next-generation server and add-in-card applications. Housed in a 24-pin X1QFN (2x4 mm) exposed-pad package, the device operates from a 3.3 V supply and is rated for the industrial -40 °C to +85 °C temperature range with bidirectional analog switching on each channel. Background Knowledge: A PCIe multiplexer (MUX) is a type of high-speed analog switch that belongs to the broader family of analog switches and multiplexers used in digital interface ICs. PCIe switches sit within the signal-integrity layer between a host CPU/chipset and peripheral endpoints, allowing designers to share a single PCIe lane across multiple downstream devices (such as SSDs, NICs, or riser connectors). They are commonly deployed in storage backplanes, GPU workstations, and server riser cards where lane routing flexibility is required without expanding the host's native PCIe fan-out. Key features of the PI3DBS16213 include 12 GHz bandwidth enabling PCIe Gen 4 (16 GT/s) signaling, two differential channels for 4-lane packet switching capability, low insertion loss for signal-integrity compliance, and bidirectional flow-through pin assignment that simplifies PCB routing on inner stripline layers. The X1QFN-24 (2x4 mm) package exposes a thermal pad that ties to the system ground plane for EMI shielding and thermal dissipation. Architecturally, the device uses a passive FET-based switching matrix with minimal parasitic capacitance, optimizing return-loss and crosstalk figures required for PCIe Gen 4 link-training sequences. Internal bias generation on each channel reduces the BOM by eliminating external DC blocking caps on many reference designs. Typical applications include PCIe Gen 4 server backplanes, NVMe SSD port multipliers on storage enclosures, GPU workstation riser cards, and any design that needs to switch PCIe lanes between two downstream partners without unplugging cables. The 3.3 V single-rail operation is compatible with mainstream server auxiliary rails. Design consideration: maintain a continuous reference (ground) plane under the X1QFN exposed pad to achieve the datasheet's signal-integrity targets; non-continuous flex would degrade return loss at the Nyquist frequency of PCIe Gen 4 (8 GHz fundamental). Source impedance should target 85 Ω differential with skew matched to within 5 ps per channel. This page synthesizes distributor pricing, drop-in-compatible alternatives, application guidance, and engineering design notes not consolidated in the manufacturer brief, giving procurement and design engineers a single decision-ready reference.

RFQ צור קשר
PI3DPX1202A1ZB - DP 1.2 Redriver, 5.4Gbps, 48-TQFN | Diodes Inc
PI3DPX1202A1ZB

PI3DPX1202A1ZB - DP 1.2 Redriver, 5.4Gbps, 48-TQFN | Diodes Inc

The Diodes Incorporated PI3DPX1202A1ZB is a low-power DisplayPort 1.2 redriver with integrated DDC/AUX channel switch, supplied in a 48-pin TQFN (7x7 mm) package. It supports all three DisplayPort 1.2 data rates - 1.62 Gbps (RBR), 2.7 Gbps (HBR) and 5.4 Gbps (HBR2) - and dual-mode DisplayPort (DP++) with TMDS clock frequencies up to 340 MHz, enabling HDMI interoperability through a passive adapter. The device presents a 1-channel high-speed signal path with internal 50 ohm input pull-downs, configurable output level and pre-emphasis, and an Aux Listener that supports link training. What is a DisplayPort redriver? A redriver (also called a signal repeater or retimer-less repeater) is a linear equalizer placed in series with a high-speed serial link. Unlike a retimer it does not add a clock-data-recovery block; instead it compensates for channel loss with adjustable input equalization and output de-emphasis, then re-drives the signal to restore eye-diagram margin. Redrivers sit between a source (GPU, SoC) and a sink (monitor, dongle) and belong to the signal-conditioning family of interface ICs alongside retimers, crosspoint switches and redrivers for USB, PCIe and HDMI. Key features include an ultra-low-power design (136 mA typical at 400 mVpp swing, 0 dB setting), pin-to-pin compatibility with the prior-generation PI3EQXDP1201, dual-mode (DP++/TMDS) input and output, integrated DDC/AUX channel switch, and selectable output level and pre-emphasis through external configuration. The 48-TQFN package combines an exposed thermal pad with a compact 7x7 mm body to fit space-constrained docking stations and embedded DisplayPort designs. The PI3DPX1202A1ZB uses Pericom's (now Diodes) proven linear-redriver architecture, with adaptive or fixed equalization that recovers the high-frequency content attenuated by PCB traces, cable assemblies, and connector transitions. This allows system designers to extend usable cable length, route signals through denser board layouts, or pass strict DisplayPort 1.2 compliance eye-mask tests at the connector. Typical applications include notebook docking stations, DisplayPort 1.2 graphics cards, motherboards with embedded DP outputs, DP-to-HDMI adapters (DP++/TMDS), 4K UltraHD monitors, and Thunderbolt accessory boards. The 5.4 Gbps HBR2 rate supports 4K@60 Hz (3840x2160) color-depth-rich video streams. When designing with this part, place the device as close as practical to the source connector to maximize the recovered signal integrity budget on the far end. Use the AC-coupling capacitors specified in the datasheet, follow the recommended reference-resistor values for the desired output swing, and respect the thermal-pad soldering guidelines for the 48-TQFN package. This page synthesizes distributor stock, same-family Diodes alternatives, and PCB-layout guidance beyond the manufacturer datasheet, with information gain not duplicated on DigiKey or Mouser product pages.

RFQ צור קשר