מוצרים (44,000+)

PEX8615-BA50BC - 12-Lane Gen2 PCIe Switch | Broadcom
PEX8615-BA50BC

PEX8615-BA50BC - 12-Lane Gen2 PCIe Switch | Broadcom

Broadcom PEX8615-BA50BC is a 12-lane, 12-port PCI Express Gen2 switch with DMA in a 324-HSBGA 19 x 19 mm package. It operates from a 1.0 V core supply and supports PCIe hot-plug, power management, Quality of Service, and traffic management functions. A PCI Express switch is a semiconductor device that connects a PCIe host or upstream endpoint to multiple downstream endpoints while dividing available lane bandwidth among connected devices. The PEX8615 belongs to the PCIe switch hierarchy: PCI Express interface IC, fabric switch, interface controller, and semiconductor. Its multiport architecture consolidates expansion traffic into a single host interface, reducing the number of independent adapters required in systems with several PCIe devices. The defining characteristics of the PEX8615-BA50BC are its 12-lane Gen2 capability, 12 downstream ports, integrated DMA, and 1.0 V core voltage. Gen2 operation corresponds to a maximum PCIe data rate of 5 GT/s per lane. The broad feature set also includes hot-plug support and configurable power management, which are important in workstation, server, storage, and embedded systems where devices may be added, removed, or placed into reduced-power states. At the architecture level, the switch provides a central PCIe routing point and supports Quality of Service and traffic management to help control data movement among endpoints. These functions are particularly useful when several devices access shared upstream bandwidth. The DMA function can transfer data without requiring every transfer to pass through a host processor, making the switch applicable to systems that need high-throughput I/O consolidation and controlled data flow. Typical uses include multi-Gigabit network adapters, RAID and storage controllers, accelerator cards, capture equipment, and industrial PCIe expansion systems. The 324-HSBGA package provides the dense interconnect required by a 12-lane, 12-port switching fabric. Because the package and signal interface are complex, layout, power delivery, reference clocking, and connector-side signal integrity require careful validation against the manufacturer datasheet. Designers should preserve the required PCIe lane and reference-clock topology, provide clean 1.0 V core power, and observe all package-ball, decoupling, and thermal requirements. The PEX8615-BA50BC is listed as obsolete in a distributor result, so new production designs should confirm lifecycle status and obtain the latest manufacturer documentation before committing the part to an active design. This product summary combines the verified PCIe switch characteristics, package details, lifecycle information, and technical replacement guidance into an engineering-focused resource for architecture selection, PCB planning, sourcing review, and legacy-system maintenance.

RFQ צור קשר
PEX8615-BA50BI - 12-Port PCIe Gen 2 Switch | Broadcom
PEX8615-BA50BI

PEX8615-BA50BI - 12-Port PCIe Gen 2 Switch | Broadcom

Broadcom PEX8615-BA50BI is a PCI Express switch IC providing 12 PCIe lanes and 12 ports for Gen 2 systems, with DMA support, in a 324-HSBGA package measuring 19 x 19 mm. Its combination of multiport switching, lane-management capability, and a high-pin-count ball-grid package makes it suitable for complex embedded computing, storage, networking, and industrial data-transfer systems where one host must fan out to multiple PCIe endpoints. A PCI Express switch is a semiconductor device that routes PCI Express traffic between a host controller and one or more downstream endpoints. It belongs to the broader interface-controller hierarchy: PCIe switch, interface IC, semiconductor, and system interconnect. The PEX8615-BA50BI is designed for systems requiring multiple Gen 2 links rather than a simple point-to-point interface, allowing multiple peripherals or storage controllers to share a host-facing PCIe connection through switch-managed traffic paths. The primary documented characteristics include 12 lanes, 12 ports, PCI Express Gen 2 operation, and DMA support. These features are important in designs that need more endpoint connectivity than the host interface can provide directly. The 324-HSBGA package supports the large number of power, ground, high-speed I/O, control, and configuration connections normally associated with a multiport PCIe switching device, while its 19 x 19 mm body accommodates substantial interconnect and power-delivery requirements. The switch architecture separates upstream host connectivity from downstream endpoint-facing ports and manages multiple PCIe lanes across the fabric. DMA support can improve data-transfer architecture by allowing appropriate devices to transfer data without requiring every movement to be serviced solely through a host processor. Exact lane allocation, supported downstream configurations, reference-clock requirements, reset behavior, power-management states, and maximum aggregate data-transfer characteristics should be confirmed against the manufacturer datasheet before final system design. Typical uses include embedded server and industrial-computer backplanes, multi-controller storage systems, PCI Express expansion chassis, data-acquisition systems, network appliances, and test equipment that must connect several PCIe devices to one platform. In these applications, the switch reduces the number of independent host roots needed while preserving the PCIe topology required by downstream cards. PCB implementation requires careful treatment of the 324-ball HSBGA footprint and the high-speed PCIe channels. Maintain the reference-controlled impedance and via geometry specified for the design stack-up, place decoupling and power-distribution structures close to the relevant supply pins, and follow the manufacturer’s ball-reference and reference-design guidance. Clock, reset, enumeration, and auxiliary power sequencing must also be implemented according to the platform PCIe requirements. This product summary consolidates the known lane, port, generation, DMA, package, and sourcing information while highlighting the implementation decisions that distinguish a workable PCIe switch design from a mechanically and electrically compliant one. For a new design, use the official Broadcom documentation for authoritative electrical limits, pin assignments, initialization procedures, and layout constraints.

RFQ צור קשר
PEX8616-BB50RBCF - PCIe Gen 2 16-Lane 4-Port Switch
PEX8616-BB50RBCF

PEX8616-BB50RBCF - PCIe Gen 2 16-Lane 4-Port Switch

The Broadcom PEX8616-BB50RBCF is a PCI Express Gen 2 switch IC with 16 lanes, four ports, 5.0 GT/s signaling, and 324 terminals in a 19 mm by 19 mm FCBGA package. It expands a PCI Express host interface into multiple downstream links for systems requiring more endpoint connectivity than a root complex can provide directly. A PCI Express switch is a multiport interface IC that routes high-speed serial transactions between a root complex, endpoints, and other switches. It sits within the PCI Express hierarchy between a host or fabric and downstream devices, adding fanout, peer-to-peer routing, and configurable traffic management while preserving the layered PCIe protocol structure. The BB silicon revision supports four PCIe Gen 2 ports and an aggregate configuration of 16 lanes. Signaling at 5.0 GT/s provides a nominal 500 MB/s payload bandwidth per direction on each Gen 2 lane. The 324-FCBGA package places the high-speed, power, ground, and auxiliary interfaces on a dense square land pattern that requires multilayer PCB construction and careful signal-integrity design. The Broadcom PEX 8616 data book covers AA, AB, and BB silicon revisions, with production information centered on revision BB. Its documentation includes the ExpressLane architecture, configuration mechanisms, ordering information, electrical characteristics, reference designs, and application guidance needed to evaluate the switch in server, storage, accelerator, and embedded PCIe systems. Typical uses include expanding a PCIe root port into four downstream links, connecting storage controllers to a host processor, supporting accelerator or network cards in multi-device chassis, and building server backplane fabrics. Exact port configuration and lane allocation must satisfy the device's supported partitioning rules and the electrical requirements of the selected system architecture. PCB implementation is the main design consideration. A 324-ball FCBGA requires escape routing through inner layers, length matching for high-speed differential pairs, continuous reference planes, and careful power and ground distribution. Follow the Broadcom reference design for layer count, decoupling, connector geometry, trace widths, and via structures instead of deriving these details from general ball-grid-array practice. This product overview combines the verified device identity, architecture, package details, sourcing links, drop-in family options, and practical implementation guidance. It also organizes the most useful PEX8616-BB50RBCF datasheet, pinout, equivalent, replacement, comparison, and application information into a design-focused reference for PCI Express engineers.

RFQ צור קשר
PEX8617-BA50BC - 16-Lane 4-Port PCIe Switch | Broadcom
PEX8617-BA50BC

PEX8617-BA50BC - 16-Lane 4-Port PCIe Switch | Broadcom

The Broadcom PEX8617-BA50BC is a PCI Express switch IC with 16 PCIe lanes, 4 ports, and PCI Express Gen 2 support, packaged in a 324-pin PBGA measuring 19 x 19 mm. It is designed for systems that need to fan out PCIe connectivity between a host or upstream device and multiple downstream endpoints. A PCI Express switch is a semiconductor device that manages traffic between a PCI Express upstream port and multiple downstream ports. This switch belongs to the PCIe switch family within interface ICs, semiconductor bridges, and connectivity controllers. Its multiport architecture allows storage controllers, network adapters, accelerators, and other peripherals to share a PCIe link while retaining independent downstream paths. The principal published characteristics are 16 PCIe lanes, 4 ports, and PCIe Gen 2 operation. The physical implementation is a 324-pin PBGA with a 19 x 19 mm body. Because the device uses a large ball-grid array, its footprint, escape-routing strategy, layer count, and power-delivery network must be planned as a high-density PCB design rather than treated as a conventional perimeter package. The four-port topology supports systems in which several endpoint devices must communicate through a centralized PCIe fabric. Compared with a point-to-point bridge, a switch provides a scalable internal routing fabric and can reduce the need for separate host controllers when endpoint traffic does not require dedicated links. Detailed link-width, lane-direction, reference-clock, and configuration behavior should be confirmed in the manufacturer datasheet before schematic sign-off. Typical uses include PCIe expansion systems, embedded servers, storage platforms, industrial controllers, test equipment, and accelerator platforms. The PEX8617-BA50BC is also suited to designs that must consolidate several downstream PCIe devices behind one upstream connection. Firmware, endpoint drivers, and system-level topology must be validated together because the switch changes the PCIe enumeration and routing model. For PCB implementation, follow the manufacturer land pattern, ball-map, and reference-design guidance exactly. Provide clean power rails, decouple each supply according to the recommended network, route high-speed differential pairs with matched impedance, and keep the 324-ball escape routing as short and symmetric as practical. Pay particular attention to via stubs, layer transitions, and return-path continuity. This page consolidates the published switch topology and package information, organizes verified sourcing links, and adds practical implementation guidance beyond a basic distributor listing. It also distinguishes documented characteristics from electrical details that still require confirmation from the manufacturer datasheet.

RFQ צור קשר
PEX8618-BA50BC - 16-Lane Gen 2 PCIe Switch | Broadcom
PEX8618-BA50BC

PEX8618-BA50BC - 16-Lane Gen 2 PCIe Switch | Broadcom

Broadcom PEX8618-BA50BC is a PCI Express switch IC with 16 lanes, 16 ports, and PCI Express Gen 2 operation, packaged in a 324-pin HSBGA measuring 19 x 19 mm. It is designed for systems that need a configurable PCIe switching fabric capable of supporting multiple downstream links while maintaining compatibility with earlier PCI Express generations. A PCIe switch is an interface IC that routes high-speed serial transactions between a host or upstream endpoint and multiple downstream devices or adapters. As part of the broader PCIe interface hierarchy, it performs link training, lane-width coordination, flow control, and transaction forwarding. This role places it between PCI Express endpoints and system fabric controllers, making it useful in servers, storage systems, embedded platforms, and expansion systems. The switch's principal characteristics include 16 PCIe lanes, 16 ports, and PCI Express Gen 2 operation. Each port supports auto-negotiation, lane reversal, and polarity reversal, improving deployment flexibility when board-routing constraints affect lane order or signal polarity. Broadcom also documents compliance with the PCI Express Base Specification 2.0 and backward compatibility with versions 1.1 and 1.0a. PEX8618-BA50BC is identified as obsolete, so its technical role is best understood through legacy PCI Express system designs rather than new product platforms. The 324-HSBGA package creates a substantial pin-count and layout challenge because high-speed differential routing, supply distribution, reference-clock connections, and auxiliary signals must be assigned across a fine-pitch BGA land pattern. Pin assignment and ball mapping should therefore be checked directly against the Broadcom pinout and reference design. Typical uses include multiport storage controllers, PCI Express expansion chassis, server backplanes, industrial computing systems, and test equipment that fans a host connection into several downstream links. In such systems, the switch can reduce the number of direct host interfaces required while preserving a consistent PCIe topology. Application suitability depends on lane budget, port configuration, reference-clock requirements, firmware support, thermal performance, and the availability of a supported board design. For new designs, confirm device lifecycle status, pin compatibility, and the exact package land pattern before committing the PCB. A replacement should be selected only after its ball map, lane assignments, power rails, reference clock, configuration interface, and firmware behavior have been compared with the original PEX8618 implementation. The same package outline alone is not sufficient to establish drop-in compatibility. This page consolidates the confirmed lane, port, generation, package, lifecycle, and interoperability characteristics of the PEX8618-BA50BC, then adds practical PCB considerations, legacy application guidance, and an explicit drop-in assessment. It also separates functional PCIe switching options from true pin-compatible replacements to help engineers avoid adopting a mechanically similar but electrically incompatible substitute.

RFQ צור קשר
PEX8619-BA50BC - 16-Lane Gen2 PCIe Switch | Broadcom
PEX8619-BA50BC

PEX8619-BA50BC - 16-Lane Gen2 PCIe Switch | Broadcom

The Broadcom PEX8619-BA50BC is a PCI Express switch integrated circuit with 16 lanes and 16 ports, designed for PCIe Gen2 system designs and intelligent I/O expansion. It is listed in a 324-HSBGA package measuring 19 mm by 19 mm. The device is identified as a flexible and versatile PCI Express switch and is associated with DMA capability, making it suitable for systems that need multiple PCIe endpoints connected through a centralized switching fabric. A PCI Express switch is a semiconductor device that expands one PCIe host interface into multiple downstream ports. The switch belongs to the broader hierarchy of PCI Express interface controllers, interface ICs, and semiconductor components. In a server, storage, industrial, or embedded system, it can aggregate PCIe devices behind a host controller while providing configurable routing between ports. The PEX8619-BA50BC is positioned for designs requiring more PCIe connectivity than a conventional endpoint controller can provide. The PEX8619-BA50BC provides a 16-lane, 16-port PCIe Gen2 switching solution with DMA support. Its lane and port counts provide the main system-level value: designers can connect multiple PCIe devices, use multi-lane links, or create a switching topology for embedded and control-plane equipment. The Broadcom listing also identifies the component as an intelligent I/O interface, reflecting its role as a traffic-management element between a PCIe host and peripheral devices. The physical implementation uses a 324-HSBGA package with a 19 mm by 19 mm body. HSBGA is a high-density ball-grid-array package intended for complex interface ICs with many signal and power connections. Package construction affects PCB layout through dense escape routing, power-plane integrity, thermal management, and assembly complexity, so the manufacturer package drawing should be used for land-pattern and ball-assignment decisions. Typical applications include PCIe expansion in embedded systems, control-plane processing, intelligent I/O backplanes, storage aggregation, and industrial equipment with multiple accelerator or interface cards. For these applications, the 16-port arrangement can simplify chassis topology compared with a collection of discrete bridges, while DMA functionality can support efficient data movement between PCIe devices. Designers should verify lane-width configuration, port routing, reference-clock requirements, reset behavior, power sequencing, and platform-specific reference design guidance against the manufacturer documentation. A PCIe switch also requires careful power delivery and signal-integrity planning across long traces, connectors, and retimers or repeaters where applicable. Do not substitute a functional PCIe switch for this MPN without confirming package compatibility, electrical limits, firmware support, and the complete port map. This product page consolidates the identified switch configuration, package information, sourcing references, comparison fields, and practical integration considerations into one engineering-focused record.

RFQ צור קשר
PEX8619-BA50BI - 16-Lane PCIe Gen 2 Switch | Broadcom
PEX8619-BA50BI

PEX8619-BA50BI - 16-Lane PCIe Gen 2 Switch | Broadcom

Broadcom PEX8619-BA50BI is a PCI Express Gen 2 switching semiconductor with 16 PCIe lanes, 16 ports, and integrated DMA functionality in a 324-ball HSBGA package measuring 19 mm by 19 mm. It is designed for systems that need to fan out PCIe connectivity among multiple endpoints while preserving the shared bandwidth available from a Gen 2 x16 link. A PCIe switch is a semiconductor in the interface IC hierarchy that routes PCI Express transactions between a root complex or host bridge and multiple downstream devices. A Gen 2 PCIe link provides a 5 GT/s signaling rate per lane, while lane width determines the aggregate theoretical bandwidth of an individual link. The PEX8619-BA50BI combines multi-port switching and DMA capabilities to support complex embedded and control-plane architectures. Key product characteristics include support for 16 PCIe lanes and 16 ports, Gen 2 operation, and DMA. The Broadcom listing identifies a 324-HSBGA package with a 19 mm by 19 mm body. The package is intended for high-density board layouts in which careful ball assignment, reference-plane continuity, power distribution, and thermal management are essential. The integrated switching fabric provides a central point for organizing multiple PCIe links in embedded systems, storage appliances, industrial controllers, and test equipment. DMA capability can move data between memory and PCIe devices, helping distribute transfer work between the host processor and dedicated DMA engines. The exact supported topology, endpoint bifurcation, completion ordering, and operating modes should be confirmed against the manufacturer documentation before final system configuration. Typical uses include PCIe expansion in embedded control systems, multi-device test platforms, data-acquisition equipment, storage controllers, and industrial communication systems. Because the device exposes many lanes and ports, board design must account for connector placement, lane routing, clock distribution, auxiliary-power sequencing, and the high pin count of the HSBGA package. Design planning should begin with lane budget, topology, firmware support, and package-level power delivery rather than treating the switch as a conventional discrete component. Reference-plane continuity and short high-speed routes are necessary for predictable PCIe performance, while thermal analysis should cover both local junction heating and the effect of adjacent board components. This product page combines package, interface, application, and replacement information into a design-focused reference for engineers evaluating the PEX8619-BA50BI. It also identifies the limits of the available evidence: complete ball assignments, electrical characteristics, supported feature combinations, and lifecycle details must be verified through Broadcom documentation and approved sourcing channels.

RFQ צור קשר
PEX8624-BB50RBCF - 24-Lane PCIe Gen 2 Switch | Broadcom
PEX8624-BB50RBCF

PEX8624-BB50RBCF - 24-Lane PCIe Gen 2 Switch | Broadcom

Broadcom PEX8624-BB50RBCF is a 24-lane, six-port PCI Express Gen 2 switch IC with a 5.0 GT/s data rate, supplied in a 324-ball FCBGA package measuring 19 mm by 19 mm. The device provides a high-bandwidth PCIe switching solution for systems that need to aggregate, route, or fan out multiple PCI Express links while preserving the electrical and logical behavior expected from a Gen 2 fabric. A PCI Express switch belongs to the interface-controller hierarchy and manages transaction routing between a root complex or upstream port and multiple downstream endpoints. Within the broader semiconductor category, the PEX8624 combines a PCIe switch fabric, port-level interface functions, configuration handling, reference-clock distribution, and power-management features in one high-ball-count package. This integration reduces the number of discrete interface devices required in complex embedded platforms. The most prominent operating characteristics are its 24 PCIe lanes, six ports, and PCIe Gen 2 data rate of 5.0 GT/s. The 324-ball FCBGA package supports dense high-speed routing on multilayer PCBs, while its commercial temperature grade targets equipment operating within commercial environmental limits. The part is categorized as a PCI bus controller and PCIe interface IC rather than a conventional analog switch or digital logic device. The PEX8624 architecture is intended for systems requiring more connectivity than a single root port can directly provide. Each supported link must comply with PCIe signal-integrity, reference-clock, configuration, reset, and power-sequencing requirements. Designers must preserve the High-Speed differential routing rules, provide suitable decoupling, and verify connector, cable, and endpoint compatibility across the complete system. Typical uses include industrial host systems, external storage controllers, test equipment, embedded computing platforms, and networked appliances that need multiple PCIe endpoints behind one host interface. Its 24-lane capacity is useful when several devices, such as NVMe controllers, Ethernet adapters, capture cards, or acceleration modules, share a chassis. Exact lane allocation and usable bandwidth depend on port configuration and the physical topology implemented on the motherboard. A critical design consideration is that the 19 mm by 19 mm FCBGA requires a dense multilayer board with short High-Speed traces, matched reference planes, and uninterrupted return paths. The layout should follow the Broadcom reference design and data book for ball assignment, reference-clock routing, power configuration, reset behavior, and connector pin mapping before schematic capture is finalized. This page combines the core device identity, package characteristics, application guidance, pricing workflow, and family-level replacement information into a practical engineering reference. It also identifies which electrical, timing, thermal, and pin-level details still require direct confirmation from the manufacturer data book before layout release or production qualification.

RFQ צור קשר
PEX8624-BB50RBIF - 24-Lane PCIe Gen 2 Switch | Broadcom
PEX8624-BB50RBIF

PEX8624-BB50RBIF - 24-Lane PCIe Gen 2 Switch | Broadcom

Broadcom PEX8624-BB50RBIF is a 24-lane, six-port PCI Express Gen 2 switch operating at 5.0 GT/s, packaged in a 324-FCBGA square ball grid array measuring 19 x 19 mm. It is designed for systems that need to fan out multiple PCI Express links while preserving the five-gigatransfers-per-second performance of a Gen 2 endpoint or host interface. A PCI Express switch is a multiport interface IC that connects one upstream host-facing port to multiple downstream ports. Within the PCI Express hierarchy, the PEX8624 belongs to the bridge and switch class of system interconnect devices. It routes ordered transaction layers between a root complex or another switch and attached endpoint devices, allowing storage, networking, accelerator, and capture cards to share a host PCIe slot. The device provides 24 PCI Express lanes, six switch ports, and a 5.0 GT/s data rate. Its 324-FCBGA package uses a square 19 x 19 mm outline and a fine-pitch ball-grid layout. The high pin count reflects the simultaneous assignment of lane transmitters and receivers, auxiliary signaling, reference-clock connections, power rails, control interfaces, and configuration pins required by a multiport PCIe switch. PEX8624-BB50RBIF is intended for Gen 2 designs rather than higher-speed Gen 3 or Gen 4 fabrics. At 5.0 GT/s, each lane carries one bit per transfer cycle before line coding and protocol overhead are considered. The six-port topology gives system architects a way to consolidate several PCIe endpoint connections behind a common upstream interface while maintaining deterministic peer-to-peer routing support. Typical uses include PCIe expansion systems, industrial data-acquisition chassis, high-bandwidth network appliances, external storage controllers, test and measurement platforms, and GPU or FPGA accelerator systems. In these applications, the switch can reduce host-controller scarcity and provide a structured path between multiple endpoint types without redesigning the mechanical enclosure around several discrete adapters. PCB implementation is the dominant engineering consideration. A 324-FCBGA device requires a fine-pitch land pattern, multilayer PCB construction, controlled impedance routing, solid reference planes, and careful power and ground-plane distribution. The differential PCIe pairs should be routed as length-matched transmission lines with minimal stubs and layer transitions, while the reference clock and PERST# sequencing require deliberate system-level planning. This page consolidates the confirmed lane count, port count, transfer rate, package outline, sourcing constraints, and practical implementation considerations for PEX8624-BB50RBIF. For a new layout, use the Broadcom PEX8624 datasheet and reference design to validate the complete ball map, power architecture, clock topology, connector assignments, and PCIe training sequence before releasing fabrication files.

RFQ צור קשר
PEX8624-BB50RBIG - 24-Lane PCIe Gen 2 Switch | Broadcom
PEX8624-BB50RBIG

PEX8624-BB50RBIG - 24-Lane PCIe Gen 2 Switch | Broadcom

The Broadcom PEX8624-BB50RBIG is a PCI Express Gen 2 switch IC with 24 lanes, six ports, a 5.0 GT/s data rate, and a 324-ball FCBGA package measuring 19 mm by 19 mm. It is designed for systems that need to fan out multiple PCI Express links while preserving a shared upstream connection. A PCI Express switch is an interface IC within the PCI Express interface-controller hierarchy. It adds multiple downstream ports to a host or embedded platform, allowing storage, networking, accelerator, and peripheral links to communicate through one PCIe uplink. The PEX8624 combines this multiport routing function with a 24-lane configuration suitable for servers, embedded platforms, test equipment, and data-acquisition systems. The device supports 24 PCIe lanes and six ports at the Gen 2 rate of 5.0 GT/s. Its 324-FCBGA package provides the interconnect density required for a high-port-count switching IC. The Broadcom product overview also identifies the PEX 8624 family as a 24-lane, six-port PCIe Gen 2 switch, making it appropriate for designs requiring simultaneous expansion of several high-speed peripheral connections. PEX8624-BB50RBIG belongs to the Broadcom ExpressLane PEX 8624 product family. Broadcom documents the AA, AB, and BB variants in a dedicated data book, while product listings identify the BB50RBI order code as a 324-FCBGA implementation. The “G” suffix distinguishes the listed ordering variant from related “F” and “C” suffix variants encountered within the same product family. Typical uses include server storage expansion, Ethernet and network-interface aggregation, industrial data-acquisition chassis, test-and-measurement systems, and embedded computing platforms. A 24-lane fabric can support multiple downstream devices while maintaining a structured PCIe topology. Port and lane allocation must follow the system design rather than treating all 24 lanes as a single endpoint connection. PCB implementation requires careful high-speed signal-integrity work. The manufacturer data book and reference-design material should govern layer stack-up, connector placement, decoupling, reference-plane continuity, and via transitions around the FCBGA device. Power delivery also requires validation under the switching and operating conditions of the intended system. This page organizes the documented switch configuration, order-code distinctions, package details, sourcing information, and practical replacement considerations. It also highlights the need to verify firmware, reference clock, auxiliary-power, port-routing, and platform-level PCIe requirements before approving a substitution.

RFQ צור קשר
PEX8632-BB50RBCF - 32-Lane PCIe 2.0 Switch | Broadcom
PEX8632-BB50RBCF

PEX8632-BB50RBCF - 32-Lane PCIe 2.0 Switch | Broadcom

Broadcom PEX8632-BB50RBCF is a 32-lane, 12-port PCI Express Gen 2 switch packaged in a 676-ball FCBGA measuring 27 x 27 mm. It supports a 5.0 GT/s PCIe link rate and provides non-transparent bridging between a host-facing port and multiple PCIe endpoint devices. The device is designed to PCI Express Base Specification 2.0 while remaining backward compatible with revisions 1.1 and 1.0a. A PCI Express switch is a semiconductor that divides one upstream PCIe connection into several downstream links. It belongs to the interface-controller hierarchy, where PCIe fabric switches sit between a root complex or host bridge and endpoint devices. This fabric-switch role reduces the number of host PCI Express ports required in servers, industrial computers, storage systems, and embedded platforms. The PEX8632 provides 32 PCIe lanes across 12 ports, providing substantial downstream bandwidth for storage controllers, network adapters, accelerators, and endpoint devices. Its 5.0 GT/s Gen 2 performance rate matches the throughput per lane defined for that generation of PCI Express. The manufacturer datasheet also identifies auto-negotiation, lane reversal, and polarity reversal support, which help simplify system integration where link training behavior must be adapted to the connected equipment. Internally, the device is organized as a PCI Express fabric switch with programmable multiport configurations. The exact number of logical ports available in a particular system depends on the operating mode and firmware configuration described in the design documentation. This makes the PEX8632 useful for systems that need flexible PCIe routing rather than a simple fixed one-to-one repeater. The 676-FCBGA package also provides a high pin count for power delivery, high-speed differential pairs, configuration interfaces, and auxiliary signals. Typical deployments include server backplane aggregation, multi-disk storage enclosures, industrial PCIe expansion systems, test and measurement platforms, and embedded chassis that must distribute PCIe traffic among several cards. A 12-port fabric is particularly appropriate when a single host adapter must reach multiple downstream endpoint types without introducing another switch tier. Layout and power design are critical because a Gen 2 switch exposes numerous simultaneous high-speed links in a relatively small 27 x 27 mm package. Follow the manufacturer reference design for ball assignment, layer stack-up, high-speed return paths, and power-plane distribution. Keep supply decoupling close to the device and confirm that every power rail meets its specified voltage, tolerance, and sequencing requirements before enabling the system. This page consolidates the device's lane count, port count, PCIe generation, package information, interoperability features, and sourcing context into one engineering reference. It also documents replacement constraints, verified drop-in candidates, and practical integration considerations that are not presented together on a typical distributor listing.

RFQ צור קשר
PEX8632-BB50RBCG - 32-Lane PCIe Gen2 Switch | Broadcom
PEX8632-BB50RBCG

PEX8632-BB50RBCG - 32-Lane PCIe Gen2 Switch | Broadcom

Broadcom PEX8632-BB50RBCG is a PCI Express switch IC built for high-lane-count expansion systems, supporting PCIe Gen2 operation at 5.0 GT/s across 32 lanes and 12 ports in a 676-ball FCBGA package measuring 27 x 27 mm. Its combination of 32 lanes, 12 downstream ports, and a 5.0 GT/s interface rate makes it suited to complex server, storage, accelerator, and embedded PCIe aggregation designs. A PCIe switch is a semiconductor device that routes PCI Express traffic between a host or upstream device and multiple downstream endpoints. In the PCI Express hierarchy, it sits below a root complex or host bridge, above endpoint devices, and within the broader category of interface ICs and bus controllers. Unlike a simple endpoint controller, a multi-port switch can divide a wide upstream link among several downstream links while managing PCIe protocol traffic, shared resources, and port-level conditions. The PEX8632 family is identified as a 32-lane, 12-port PCI Express Gen2 switch with a stated transfer rate of 5.0 GT/s. The 12-port architecture supports designs in which numerous endpoint functions share a constrained upstream connection. Its 676-FCBGA package provides the dense interconnect needed for this class of switch, while the reported 27 x 27 mm body dimension defines a substantial routing and thermal-design footprint. The architecture targets balanced bandwidth rather than merely maximizing downstream-port count. With 32 lanes available at 5.0 GT/s, the switch can support wide aggregation paths for NVMe storage, network controllers, acceleration hardware, or other PCIe endpoint devices. Port-level planning remains essential because the usable bandwidth of each downstream link depends on its negotiated width, the upstream allocation, traffic patterns, protocol overhead, and switch configuration. Typical applications include PCIe expansion chassis, server backplanes, storage aggregation, accelerator systems, industrial data-processing equipment, and high-density test systems. In each case, the 12 downstream ports can simplify physical fan-out while the Gen2 5.0 GT/s link rate supports a common PCIe generation across the system. The 676-ball package requires careful ball assignment, multilayer routing, and high-density manufacturing support. Designers should confirm the complete Broadcom pinout, power architecture, reference-clock requirements, and thermal limits against the manufacturer datasheet before schematic capture. PCB implementation must account for the 27 x 27 mm FCBGA land pattern, escape routing, power delivery, and heat removal. Exact capacitance, voltage, clock, and sequencing values should be taken directly from the applicable device documentation. This product overview consolidates the confirmed PCIe generation, lane count, port count, transfer rate, package, and ordering information into one engineering reference. It also identifies the distinct configuration alternatives that can be considered for a new PCIe expansion design, helping teams compare footprint, routing, thermal, and configuration implications before committing a 676-ball design to fabrication.

RFQ צור קשר
PEX8636-AA50RBCG - 36-Lane PCIe Gen 2 Switch | Broadcom
PEX8636-AA50RBCG

PEX8636-AA50RBCG - 36-Lane PCIe Gen 2 Switch | Broadcom

The Broadcom PEX8636-AA50RBCG is a PCI Express switch IC configured as a 36-lane, 24-port PCI Express Gen 2 multi-root switch with a stated data rate of 5.0 GT/s per lane. The device is supplied in a 1156-FCBGA package measuring 35 mm by 35 mm and is packaged in trays for board-level integration. Its ExpressLane architecture is intended to fan out multiple PCI Express links among host processors, endpoint devices, storage controllers, and network adapters. A PCI Express switch is a semiconductor device that routes PCI Express transaction and data traffic between multiple downstream ports and an upstream host-facing port. Within the PCI Express hierarchy, the switch sits between a root complex and endpoint devices. The PEX8636-AA family provides multi-root switching for systems that need to divide expansion traffic among several logical domains while maintaining a shared PCI Express fabric. Principal characteristics include support for 36 PCI Express lanes, 24 ports, and PCI Express Gen 2 operation at 5.0 GT/s. The 1156-FCBGA package provides the dense interconnect required for a high-port-count switching device, while the large 35 mm by 35 mm body supports controlled escape routing on multilayer PCBs. Listed product information identifies tray packaging, a moisture sensitivity level of 4 with a 72-hour floor-life condition, and export control classification number 5A991B1. The switching architecture allows a platform to consolidate several downstream links behind an upstream link, reducing the need for separate fabric-switch silicon when deterministic lane routing and centralized management are required. Fanout designs can improve resource organization in servers, storage appliances, industrial controllers, and multi-host systems, provided that the system topology remains within the electrical and protocol constraints defined for the device. Thermal design is a central implementation consideration because a 1156-ball FCBGA concentrates high-speed and power-management functions into a compact area. The PCB should provide the reference stack-up, via density, decoupling, and copper area prescribed by the Broadcom ExpressLane PEX 8636-AA Data Book. Signal-integrity validation should include the intended lane rates, loss budget, connector and retimer transitions, and the full end-to-end channel. Typical uses include server storage backplanes, PCI Express expansion chassis, multi-root computing platforms, industrial data-acquisition systems, and test equipment that distributes links among several instruments or accelerators. Application selection must verify port mapping, lane-width sharing, firmware support, reference-clock architecture, and the precise Broadcom ordering code before schematic capture.

RFQ צור קשר
PEX8648-BB50RBCF - 48-Lane 12-Port PCIe Gen 2 Switch | Broadcom
PEX8648-BB50RBCF

PEX8648-BB50RBCF - 48-Lane 12-Port PCIe Gen 2 Switch | Broadcom

The Broadcom PEX8648-BB50RBCF is a 48-lane, 12-port PCI Express Gen 2 switch operating at 5.0 GT/s and packaged in a 676-FCBGA (27 x 27 mm) package. It is designed for systems that require multiple PCI Express links to be consolidated, switched, and routed among host, accelerator, storage, networking, or embedded endpoints. The device belongs to the ExpressLane PEX 8648 family of PCI Express fabric switches. A PCI Express switch is an interface IC that creates a switched PCI Express fabric beneath a host complex or another PCI Express switch. Within the broader semiconductor hierarchy, it is an interface controller, then a PCI Express interface IC, then a semiconductor. The PEX8648 supports the PCI Express Gen 2 signaling rate of 5.0 GT/s and provides 48 lanes across 12 ports, making it suitable for complex server, accelerator, storage, and network-equipment architectures. The principal documented characteristics are 48 PCI Express lanes, 12 ports, a 5.0 GT/s per-lane data rate, and a 676-FCBGA package measuring 27 x 27 mm. The manufacturer data book identifies the PEX8648 family as a 48-lane, 12-port PCI Express Gen 2 switch. Its high lane count allows multiple downstream devices or additional switch tiers to share an upstream connection while preserving individual PCIe links. The BB silicon revision and RB ordering designation place the part within the PEX 8648 BB product family. The manufacturer documentation covers the PEX8648 AA, AB, and BB devices and includes production information for silicon revision BB. Because this is a dense, high-speed interconnect device, correct ball assignment, power delivery, reference-clock implementation, and signal-integrity layout are more important than a conventional low-power analog layout. Typical applications include PCI Express fabric expansion in industrial servers, accelerator aggregation in compute systems, high-bandwidth storage controllers, Ethernet and networking appliances, and embedded systems that connect several PCIe endpoints to a host controller. The 12-port topology can also support hierarchical fabrics in which downstream switches expand the number of available endpoints. PCB design should follow the manufacturer’s ball-out, reference design, power-plane, decoupling, and high-speed routing guidance exactly. A 676-ball FCBGA demands careful via-in-pad or microvia strategy, adequate layer-transition planning, and controlled impedance for every PCI Express lane. Use the pin-description and ball-assignment tables in the Broadcom data book when assigning PCB tracks. This page combines the documented PEX8648 family specifications, sourcing information for the exact ordering code, engineering application guidance, and a constraint-based comparison of available same-family ordering variants. It is intended to help hardware engineers qualify the correct Broadcom ordering code without confusing package, lifecycle, or configuration differences with genuine drop-in replacements.

RFQ צור קשר
PEX8648-BB50RBCG - 48-Lane PCIe Gen2 Switch | Broadcom
PEX8648-BB50RBCG

PEX8648-BB50RBCG - 48-Lane PCIe Gen2 Switch | Broadcom

The Broadcom PEX8648-BB50RBCG is a 48-lane, 12-port PCI Express Gen 2 switch integrated circuit in a 676-ball FCBGA package measuring 27 mm by 27 mm. It operates at 5.0 GT/s per lane and is designed to fan out multiple PCI Express links for systems requiring increased endpoint connectivity, expanded storage capability, or dedicated downstream traffic paths. A PCI Express switch is a multiport semiconductor that routes PCI Express transaction, data, and control traffic between a host or upstream port and multiple downstream endpoints. Within the PCIe hierarchy, this device belongs to the switching and interface-device category, where lane multiplexing allows a constrained host interface to serve numerous peripherals without assigning a dedicated root port to each one. The principal specifications are 48 PCIe lanes, 12 ports, a 5.0 GT/s PCIe Gen 2 data rate, and a 676-FCBGA package with a 27 mm by 27 mm body. The reported RoHS status supports use in modern electronics manufacturing, while the Broadcom technical document covers the AA, AB, and BB silicon revisions of the PEX 8648 family. Exact electrical limits, reference clocking, power domains, and operating-temperature details should be selected from the manufacturer data book. The PEX 8648 architecture is suited to consolidating PCI Express connectivity in embedded computers, industrial controllers, network appliances, storage systems, and test equipment. Forty-eight lanes provide substantial downstream bandwidth at 5.0 GT/s per lane, while 12 ports allow more endpoint fan-out than a conventional root-complex-only design. Designers should preserve the exact reference-design ball assignments, power architecture, and connector requirements when translating the device into a PCB layout. This page distinguishes the ordering code, package, lane count, port count, and PCIe generation from superficially similar Broadcom variants. It also organizes replacement guidance around genuine FCBGA-676 pin-compatible options rather than functional PCIe switches that require a different footprint. Compatibility must include the correct ball map, lane assignments, clocking, auxiliary power, and system firmware configuration. For new layouts, follow the Broadcom PEX 8648 data book for differential routing, reference-plane transitions, power distribution, decoupling, reset behavior, and connector reach-through. A small BGA with hundreds of signal balls requires disciplined escape routing and through-hole vias beneath the device where the package design permits them. Confirm the exact ordering code before releasing a long-lead procurement order. The information here synthesizes the confirmed 48-lane, 12-port, 5.0 GT/s architecture with package-level replacement analysis and implementation guidance. It helps engineers distinguish orderable suffixes, assess board-level reuse, and identify the electrical and mechanical checks required before treating a candidate as a true drop-in replacement.

RFQ צור קשר
PEX8648-BB50RBIG - 48-Lane PCIe Gen2 Switch | Broadcom
PEX8648-BB50RBIG

PEX8648-BB50RBIG - 48-Lane PCIe Gen2 Switch | Broadcom

Broadcom PEX8648-BB50RBIG is a PCI Express Gen2 switch IC built around a 48-lane, 12-port ExpressLane architecture, with a stated link rate of 5.0 GT/s and a 676-ball FCBGA package measuring 27 x 27 mm. It is intended for systems that need to fan out multiple PCI Express links while maintaining a common switching fabric. A PCI Express switch is a semiconductor device that creates multiple PCIe links from an upstream host connection. It belongs to the PCI Express interface-controller family, alongside host bridges, endpoint controllers and fabric switches. By placing a switch between a root complex and downstream devices, a system can support concurrent expansion traffic, peer-to-peer routing and more complex PCI Express topologies than a direct point-to-point connection permits. The confirmed PEX8648 family characteristics include support for 48 lanes across 12 ports, PCIe Gen2 operation at 5.0 GT/s, and the 676-FCBGA package identified for the BB50 variants. These specifications make the device suitable for high-bandwidth platform designs requiring numerous downstream links. Its scale is particularly relevant to storage systems, advanced networking appliances, embedded computing platforms and test systems that must aggregate several PCIe devices. The PEX8648 data book describes the BB silicon revision and its detailed technical specifications. A 27 x 27 mm FCBGA package provides a dense mounting solution for multilayer boards, but it also requires careful escape routing, plane management, power delivery and thermal design. Because the package contains 676 balls, board designers should preserve the manufacturer's land pattern, ball assignment and reference design rather than treating the package as a generic square BGA. Typical deployments place one or more PCIe switches behind a host controller or another fabric switch. In a server or storage controller, the switch can connect NVMe-capable devices, host buses and management interfaces. In an industrial or networking appliance, it can organize multiple endpoint controllers behind a shared upstream link. The primary engineering trade-off is that PCIe switching adds board area, power, configuration requirements and signal-integrity complexity in exchange for topology flexibility and aggregate throughput. Power delivery must account for both the main supply rails and the auxiliary rails used by the reference architecture. Layer-stackup selection, connector and retimer placement, and the separation of high-speed and power paths should follow the Broadcom reference material. For a 27 x 27 mm BGA, inspection and assembly processes should also be coordinated with the board fabricator because fine-pitch ball alignment can materially affect yield. This page combines the verified 48-lane, 12-port, 5.0 GT/s and FCBGA-676 characteristics with practical routing, power, thermal and replacement guidance. The alternatives table focuses on same-package PEX8648 orderable variants, while the application sections explain how the switch architecture changes board-level design decisions.

RFQ צור קשר
PEX8649-AA50RBCG - 48-Lane PCI Express Gen 2 Switch | Broadcom
PEX8649-AA50RBCG

PEX8649-AA50RBCG - 48-Lane PCI Express Gen 2 Switch | Broadcom

Broadcom PEX8649-AA50RBCG is a PCI Express Gen 2 multi-root switch with 48 lanes, 12 ports, and a 676-FCBGA package measuring 27 mm by 27 mm. It supports PCIe operation at 5 GT/s and is designed for systems that need to fan out multiple PCI Express links from a host or root complex. A PCI Express switch is a semiconductor that manages point-to-point serial links between a host, endpoints, and downstream switches. The PEX8649 belongs to the broader PCI Express interface hierarchy, where lane count, port count, link speed, routing capability, and package compatibility determine whether it can satisfy a board architecture. A multi-root configuration can also provide controlled paths between independent root complexes rather than relying on a single-tree topology. The PEX8649-AA50RBCG provides 48 PCIe lanes across 12 ports, with PCIe Gen 2 operation at 5 GT/s. Its multi-root switch architecture is appropriate for high-performance computing, server expansion, accelerator systems, storage fabrics, and test equipment that require multiple PCIe links. The device can consolidate several downstream links behind a common switching component, reducing board-routing complexity while preserving independent lane resources. Broadcom ExpressLane PEX8649 devices use a high-speed, low-power serial interface architecture intended for reliable point-to-point communication. Because the PEX8649 is a large fine-pitch BGA device, correct ball assignment, multilayer routing, reference-clock distribution, power-delivery design, and signal-integrity verification are central to successful implementation. Differential pairs should be routed as short, continuous 100-ohm differential channels with appropriate return-path continuity. Typical applications include accelerator chassis, high-density storage systems, embedded computing platforms, industrial servers, network appliances, and PCI Express test equipment. In these systems, the switch can provide multiple downstream endpoints with lane-sharing or bifurcation arrangements where the board design and firmware configuration permit them. The 12-port topology is especially useful where numerous discrete PCIe functions must be integrated behind a common host-facing link. Power delivery and thermal design require particular attention because a 676-ball FCBGA contains many high-speed I/O and power connections. Follow the Broadcom PEX8649 data book for the complete ball map, reference circuitry, layout constraints, and power-management sequence. PCB design should preserve the specified impedance, isolation, clock routing, and decoupling topology rather than relying on generic BGA-layout assumptions. This product page combines the manufacturer data-book information with practical procurement, comparison, and design guidance. It also distinguishes documented pin compatibility from broader functional similarity, helping engineers evaluate whether a candidate can actually replace the PEX8649-AA50RBCG without changing the PCB footprint or redesigning the surrounding system.

RFQ צור קשר
PEX8664-AA50RBCF - 64-Lane PCIe Gen 2 Switch | Broadcom
PEX8664-AA50RBCF

PEX8664-AA50RBCF - 64-Lane PCIe Gen 2 Switch | Broadcom

Broadcom PEX8664-AA50RBCF is a PCI Express Gen 2 switch that provides 64 PCIe lanes and 16 ports in a 1156-ball FCBGA package measuring 35 x 35 mm. It is designed for complex server, storage, networking, and embedded systems that require one host or multiple hosts to fan out across numerous PCIe endpoints. The device supports a PCIe Gen 2 data rate of 5.0 GT/s, according to the Broadcom PEX 8664 product documentation. A PCI Express switch is a fabric-building semiconductor that accepts PCIe traffic from an upstream host connection and routes it across multiple downstream links. It belongs to the PCI Interface IC and semiconductor hierarchy, where the PEX8664 combines protocol switching, lane management, configuration handling, and high-speed differential I/O in one highly integrated device. Multi-host operation allows system designers to partition downstream resources into separate domains and use doorbell registers to coordinate status and failover behavior. The PEX8664-AA50RBCF is identified by Broadcom and its distributor listings as a 64-lane, 16-port PCI Gen 2 switch. Its 1156-FCBGA package is intended for dense, multilayer PCB layouts and requires careful escape routing, reference-plane management, power delivery, and thermal design. Because the package exposes a very large number of high-speed contacts, board designers should follow the manufacturer’s ball map, reference design, and recommended stack-up rather than infer connectivity from generic package conventions. The switch is relevant to data-center appliances, enterprise storage systems, industrial controllers, and communication equipment where a single root complex would otherwise need many discrete routing and switching functions. Its 64 lanes can be allocated among 16 downstream ports, allowing multiple NVMe storage devices, network controllers, acceleration devices, or legacy PCI Express devices to share a central switching fabric. Broadcom documents multi-host and failover operation for the PEX 8664 family. In failover mode, the designated surviving host can disable the upstream connection associated with a failed host and reprogram the affected downstream ports into its own domain. This architecture supports greater availability, but software must coordinate ownership and resource assignment correctly to prevent conflicting accesses to shared endpoints. Design implementation should treat this as a high-speed, high-pin-count device rather than a conventional interface IC. Differential pairs require continuous reference planes and controlled impedance, while multiple supply rails may require distributed decoupling and dedicated power planes. Thermal performance depends on both the package exposed-pad arrangement and the PCB copper available for heat spreading. Validate final layer count, via transitions, connector escape geometry, power integrity, and signal integrity using the manufacturer reference design and simulation tools. This page combines the confirmed PCIe Gen 2 switch specifications, package information, sourcing context, drop-in candidates, and implementation guidance in a format intended to accelerate engineering review. The PEX8664-AA50RBCF is best suited to systems whose architecture, PCB resources, and firmware already support a large PCI Express switching fabric.

RFQ צור קשר
PEX8664-AA50RBCG - 64-Lane PCIe Gen2 16-Port Switch | Broadcom
PEX8664-AA50RBCG

PEX8664-AA50RBCG - 64-Lane PCIe Gen2 16-Port Switch | Broadcom

Broadcom PEX8664-AA50RBCG is a PCI Express Gen2 switch IC with 64 lanes, 16 ports, and a 5.0 GT/s data rate, supplied in a 1156-ball FCBGA package measuring 35 x 35 mm. It is designed for systems that need to fan out multiple PCI Express links while preserving a centralized, high-bandwidth fabric. A PCI Express switch is a multiport expansion and routing device within the interface-IC hierarchy. It sits between PCIe endpoint devices and a host or upstream controller, using packet switching, port arbitration, configuration handling, and lane-level connectivity to distribute traffic across multiple links. The PEX8664 family therefore belongs to the PCIe interface IC, semiconductor, and computer-connectivity categories. The primary identified characteristics are 64 PCI Express lanes, 16 ports, and operation at 5.0 GT/s. The listed package is FCBGA-1156 in a 35 x 35 mm form factor. These figures make the device relevant to embedded computing, storage, networking, accelerator, and industrial systems that require more PCIe connectivity than a single host controller can provide. Technical implementation requires careful lane assignment, reference-clock distribution, power delivery, signal-integrity validation, and firmware-supported enumeration and routing. Because the device exposes many high-speed differential pairs, PCB layout quality directly affects insertion loss, crosstalk, jitter tolerance, and link stability. Power sequencing and rail decoupling also require coordinated planning across the large ball-grid array. Typical deployments include consolidating NVMe storage into a multi-port fabric, connecting PCIe Ethernet or network-interface adapters, attaching accelerator cards to industrial controllers, and expanding server backplanes. The 16-port topology is particularly useful where multiple endpoint classes must coexist behind a single upstream interface. The principal design trade-off is integration versus implementation complexity. Consolidating up to 64 lanes and 16 ports simplifies system topology, but it requires a large FCBGA land pattern, extensive high-speed routing, careful thermal management, and comprehensive PCIe configuration support. Confirm the exact lane-to-port mapping, device-specific limits, reference design, and exposed-pad requirements in the manufacturer documentation before layout release. This product page organizes the verified 5.0 GT/s, 64-lane, 16-port, and FCBGA-1156 characteristics with practical PCB, power, thermal, and signal-integrity guidance. It also distinguishes the exact target ordering code from the closely related F revision so procurement and redesign decisions are based on the correct device variant.

RFQ צור קשר
PEX8680-AA50RBCF - 80-Lane PCIe Gen 2 Switch | Broadcom
PEX8680-AA50RBCF

PEX8680-AA50RBCF - 80-Lane PCIe Gen 2 Switch | Broadcom

Broadcom PEX8680-AA50RBCF is an 80-lane, 20-port PCI Express Gen 2 switch IC operating at 5.0 GT/s, housed in a 1156-FCBGA package measuring 35 x 35 mm. The device is designed for high-speed computing systems that require centralized PCIe connectivity, traffic routing, and expansion-card management. A PCI Express switch is a semiconductor device that connects a host or upstream PCIe interface to multiple downstream endpoints. It belongs to the hierarchy of PCI Express interface ICs, bus controllers, interface semiconductors, and general-purpose integrated circuits. By distributing PCIe traffic across numerous lanes and ports, the PEX8680 class reduces system-routing complexity while preserving the protocol behavior required by modern servers, storage systems, and accelerator platforms. Principal characteristics include support for 80 PCIe lanes, 20 ports, and a 5.0 GT/s generation-2 data rate. The square HBGA/FCBGA package uses ball terminals, while the documented minimum operating temperature is 0°C. These specifications place the device in the class of high-density switching silicon intended for complex computing platforms rather than small embedded or consumer systems. The switch fabric provides multiple downstream connections from a common PCIe infrastructure. Lane sharing, device routing, and downstream-port coordination are important benefits when systems include numerous storage controllers, network interfaces, accelerators, or expansion cards. Its 1156-terminal package also requires a correspondingly dense PCB footprint, careful escape routing, and high-speed signal-integrity management to preserve performance across the PCIe Gen 2 interface. Typical applications include server backplanes, external storage appliances, accelerator systems, network-attached storage, high-end workstation platforms, and test equipment that emulates multiple PCIe endpoint connections. In each case, the switch can consolidate endpoint traffic behind one upstream link, reducing the number of discrete host-to-device routing paths while supporting the 20-port topology. A primary design consideration is that the 1156-FCBGA package is electrically and physically demanding. Board designers must use the manufacturer-recommended land pattern, ball assignments, reference design, and high-speed layout guidance. Thermal performance also depends on multilayer PCB construction, via arrays, power delivery, and heat spreading around the switch. This product record combines the documented PCIe configuration and package details with a focused engineering assessment of alternatives, comparison parameters, and implementation considerations. It helps designers evaluate whether the PEX8680-AA50RBCF architecture and footprint align with an existing high-speed computing platform before beginning detailed signal-integrity and power-distribution work.

RFQ צור קשר
PEX8680-AA50RBCG - 80-Lane PCIe Gen 2 Switch | Broadcom
PEX8680-AA50RBCG

PEX8680-AA50RBCG - 80-Lane PCIe Gen 2 Switch | Broadcom

The Broadcom PEX8680-AA50RBCG is an 80-lane, 20-port PCI Express Gen 2 switch operating at 5.0 GT/s and packaged in a 1156-FCBGA package measuring 35 x 35 mm. The device is designed to route PCI Express traffic between multiple endpoints and a host-facing interface in complex computing systems. Its tray packaging and MSL 4 rating support controlled handling and surface-mount assembly. A PCI Express switch is a high-speed interface controller that expands a limited set of PCIe links into multiple independently connected downstream ports. It belongs to the PCI Express interface-controller hierarchy and enables systems such as servers, storage appliances, embedded platforms, and industrial computers to consolidate high-bandwidth peripherals behind a common switch fabric. The PEX8680 supports Gen 2 operation at 5.0 GT/s, providing a defined pathway for compatible PCI Express devices and downstream card resources. The headline configuration is 80 PCI Express lanes distributed across 20 ports. This broad channel count makes the switch suitable for systems that must aggregate multiple controllers, accelerators, network interfaces, or storage paths. Configuration flexibility is identified in the product documentation, while the 1156-ball FCBGA package provides the dense interconnect required for a switch containing many high-speed differential lanes. The PEX8680 belongs to Broadcom's PCI Express switching product family and operates as an interface IC rather than a processor, memory device, or analog switch. Its Gen 2 architecture and 80-lane capacity distinguish it from lower-lane-count PCIe switches. The 1156-FCBGA footprint is a demanding ball-grid array, so successful implementation depends on high-density PCB construction, controlled impedance routing, appropriate layer-count design, and careful power-delivery planning. Typical uses include compact servers, converged systems, external storage enclosures, industrial controllers, test equipment, and networked appliances that require more PCIe endpoint connectivity than a root complex can provide directly. The switch can also be used to create segmented PCIe fabrics when downstream ports require isolation, switching, or coordinated routing between multiple device types. Designers should use the pin-description and reference-design information in the Broadcom datasheet when assigning every ball, supplying auxiliary rails, configuring the switch, and implementing high-speed differential routing. A 35 x 35 mm FCBGA requires careful escape routing and multilayer interconnects. Power and thermal planning should account for the switching activity of 80 lanes rather than treating the device as a low-power interface controller. This product summary consolidates the verified lane count, port count, signaling rate, package dimensions, packaging method, moisture-sensitivity classification, and practical implementation concerns into an engineering-focused reference. It also distinguishes the G ordering code from the closely related F ordering code while avoiding unsupported assumptions about functions that require confirmation in the manufacturer documentation.

RFQ צור קשר
PEX8696-AA50RBCF - 96-Lane PCIe 2.0 Switch | Broadcom
PEX8696-AA50RBCF

PEX8696-AA50RBCF - 96-Lane PCIe 2.0 Switch | Broadcom

The Broadcom PEX8696-AA50RBCF is a PCI Express Gen 2 switch IC with 96 lanes, 24 ports, and a 5.0 GT/s signaling rate, housed in a 1156-ball 35 x 35 mm fine-pitch ceramic ball grid array package. It is designed to fan out a PCI Express system into multiple downstream links while supporting modern server, storage, and embedded system architectures. A PCI Express switch is a semiconductor device that expands one upstream PCI Express interface into multiple downstream ports. It belongs to the PCI Express interface IC hierarchy, where system I/O connectivity, protocol translation, lane routing, and downstream-device arbitration are handled by dedicated switching silicon. Such devices reduce the number of host-controller connections required in multi-lane systems. The PEX8696 provides 96 aggregate PCI Express lanes across 24 ports and supports PCI Express Gen 2 operation at 5.0 GT/s per lane. Its large 1156-FCBGA package provides the interconnect density required for a switch of this scale. The device is identified as a commercial-temperature, square, ball-grid-array PCI bus controller. Broadcom's reliability documentation associates the PEX8696-AA50RBC family with TSMC's 90 nm Low-K process technology and a 35 x 35 mm lead-free solder-bump HFC-BGA package. These package and process details are important for high-speed systems because controlled escape routing, low inductance, manufacturing compatibility, and board-level signal integrity determine whether the theoretical PCIe link rate can be sustained in practice. Typical applications include server storage fabrics, PCI Express expansion systems, host-to-card switching, embedded computing platforms, and industrial data-acquisition systems. A 24-port switch is especially useful where many peripherals must share a limited set of host interfaces without introducing a separate root complex for every endpoint. Board implementation requires careful attention to controlled-impedance routing, lossless or lightly lossy PCB materials, power delivery, and connector and via placement. Keep high-speed differential routes short and avoid unnecessary stubs. Refer to the Broadcom reference design and pin-description material for the exact ball assignments, reference clock connections, supply rails, and configuration requirements before fabrication. This page combines Broadcom device specifications, package characteristics, lifecycle considerations, and same-footprint replacement guidance with practical PCB and signal-integrity notes. It is intended to help system architects and hardware engineers determine whether the 96-lane, 24-port PCIe Gen 2 switch matches their expansion, routing, and manufacturability requirements.

RFQ צור קשר
PEX8712-CA80BC - 12-Lane PCIe Gen 3 Switch | Broadcom
PEX8712-CA80BC

PEX8712-CA80BC - 12-Lane PCIe Gen 3 Switch | Broadcom

The Broadcom PEX8712-CA80BC is a PCI Express switch integrated circuit designed for 12-lane, 3-port PCIe Gen 3 systems. It is identified in the product listings as a special-purpose interface or PCI Express switch IC and uses a 324-pin FCBGA package measuring 19 x 19 mm. Broadcom describes the PEX 8712 as an ExpressLane PCIe Gen 3 switch developed on 40 nm technology, with multi-host switching capability for connecting multiple hosts to their respective endpoints. A PCIe switch is an interface IC that sits between a host or root complex and multiple PCIe endpoints. It provides fan-out, non-blocking interconnection, and centralized switching for systems such as servers, storage equipment, communications platforms, and graphics systems. The PEX8712-CA80BC is intended for designs that require a wider PCIe lane count and multiple downstream connections while maintaining Gen 3 PCIe operation. The verified product information identifies the device as a 12-lane, 3-port PCI Express Gen 3 switch. The Broadcom product page also specifies a typical power of 3.5 W and identifies the integrated package as a 19 x 19 mm, 324-pin FCBGA. These characteristics make the device suitable for board-level infrastructure where a compact, high-density switch implementation is required. The target orderable designation PEX8712-CA80BC is associated with the Broadcom PEX 8712 family. The listings use the related notation PEX8712-CA80BC-G, while the requested product identifier is PEX8712-CA80BC. Package details, electrical limits, thermal resistance, reference clock requirements, lane-specific performance, and the complete pin assignment require confirmation from the manufacturer datasheet before schematic release. Typical implementation involves routing the host-facing PCIe lanes, endpoint-facing lanes, auxiliary power, reference clock, control signals, and configuration interfaces through a dense multilayer PCB. Because the device is supplied in an FCBGA package, careful escape routing, via-in-pad or microvia strategy, reference-plane continuity, power delivery, and thermal management are essential. The 3.5 W typical power figure also makes power budget and junction-temperature calculations a central part of system validation. For new designs, verify the exact ordering code, package ball map, electrical characteristics, firmware requirements, reference design, and supported platform configuration with Broadcom. For replacement evaluation, use the manufacturer cross-reference process or the Request a Quote form on this page to confirm availability and technical suitability rather than assuming that a different PCIe switch is pin-compatible.

RFQ צור קשר
PEX8713-CA80BC - 12-Lane 10-Port PCIe Gen 3 Switch | Broadcom
PEX8713-CA80BC

PEX8713-CA80BC - 12-Lane 10-Port PCIe Gen 3 Switch | Broadcom

Broadcom PEX8713-CA80BC is a PCI Express Gen 3 switching IC with 12 lanes, 10 ports, integrated 8.0 GT/s SerDes, and a 324-pin FCBGA package measuring 19 mm by 19 mm. It provides multi-host PCI Express switching for scalable, high-bandwidth, non-blocking interconnection. A PCI Express switch is a semiconductor in the interface-IC hierarchy that routes PCI Express traffic between a host or root complex and multiple endpoints. Positioned as a PCIe switch, interface controller, and power-management-independent connectivity component, the PEX 8713 supports fan-out, aggregation, and peer-to-peer traffic patterns used in servers, storage systems, communications equipment, and graphics platforms. The device integrates 12 PCIe lanes and provides 10 ports for connecting multiple hosts with their respective endpoints. Its PCI Express Gen 3 SerDes operates at 8.0 GT/s per lane, enabling a high aggregate link bandwidth of 96.0 GT/s when all 12 lanes are active. This bandwidth calculation uses the stated 8.0 GT/s per-lane rate and 12-lane configuration. The Broadcom product overview identifies the PEX 8713 as a multi-host switching solution designed for scalable, non-blocking interconnection. This architecture allows endpoint traffic to be distributed across multiple downstream links rather than relying on one shared point-to-point path. The resulting topology can improve routing flexibility and provide a practical foundation for systems with multiple processors, storage controllers, or accelerator endpoints. Typical uses include server expansion, storage connectivity, communication platforms, graphics systems, and other PCIe aggregation designs. The 10-port configuration is particularly useful when a system must fan a limited set of upstream lanes across several endpoint devices while retaining scalable high-speed connectivity. Board design requires careful high-speed signal-integrity work. Differential PCIe pairs need controlled impedance, continuous reference planes, minimized stub effects, and connector or package-transition discipline. Power delivery should be planned for the transceiver and digital sections across the documented operating conditions, while thermal analysis must account for the 19 mm by 19 mm FCBGA construction. This page organizes the PEX 8713 architecture, package information, procurement options, and replacement guidance. It also identifies the limits of currently available equivalent-part data so engineers can distinguish true order-code matches from unrelated PCIe switch families.

RFQ צור קשר