מעגלים משולבים

PIC32MZ2064DAK176T-V/2J

PIC32MZ2064DAK176T-V/2J - 200MHz Graphics MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2064DAK176T-V/2J is a 32-bit MIPS32 microAptiv-based PIC32MZ DAK family microcontroller running at 200 MHz, integrating 2 MB Flash and 640 KB SRAM with a dedicated Graphics Controller, on-chip 32 MB (DAK variant) externally addressable DDR2 DRAM, and a 176-pin HLFQFP (20x20 mm) LQFP package. The part suffix T indicates tape-and-reel packaging and V/2J denotes the -40C to +105C automotive/V-grade temperature range. The integrated graphics pipeline enables HMI/GUI designs on a chip without external GPU silicon. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals; the PIC32MZ DAK series occupies the high-performance graphics tier of this category (MCU -> 32-bit MCU -> graphics-enabled MCU -> HMI controller -> embedded system SoC). Compared to a general-purpose MCU, the PIC32MZ DAK family adds a hardware graphics controller and DDR2 DRAM interface, simplifying parallel-display designs. Key features include the 32-bit MIPS32 microAptiv core with I/D-cache, MIPS DSP ASE extensions, 2 MB Flash with ECC, 640 KB SRAM, hardware graphics processor with TFT/LCD controller, six 4-wire SPI modules (up to 50 MHz), SQI configurable as additional SPI (up to 80 MHz), six UART modules (25 Mbps with LIN 2.1 and IrDA support), two CAN 2.0B modules with DeviceNet addressing, five I2C modules (up to 1 Mbaud) with SMBus support, a Parallel Host Port (PMP), and Peripheral Pin Select (PPS) for flexible pin function remapping. Two CAN modules each have a dedicated DMA channel for low-overhead bus traffic. The device targets advanced HMI/GUI applications - industrial touch panels, automotive dashboards, medical patient monitors, home-automation control screens, and point-of-sale terminals - where parallel or parallel connections, the integrated TFT controller and DDR2 framebuffer remove the need for an external GPU and reduce BOM cost. The 200 MHz core plus 2 MB video hardware targets the right performance bracket for WVGA-class displays. When designing with this part, plan PCB layout for DDR2 signals first - controlled impedance, matched lengths, and proper decoupling dominate signal integrity. Use MPLAB Harmony 3 to configure the graphics middleware (GFX) and the DDR2 DRAM controller for your panel. For cost-down swaps within the same family, refer to the PIC32MZ2064DAH176 (DAG/DAB/DAA are BGA variants) and PIC32MZ2064DAS176 (DAS = on-chip 128 MB DRAM, the larger-DRAM cousin). This page synthesizes distributor pricing, drop-in alternatives within the same VQFPH-FP-176 package, MPLAB Harmony configuration notes, and automotive-grade selection guidance not found in the manufacturer datasheet alone.

RFQ צור קשר

PIC32MZ2064DAL169-I/HF

PIC32MZ2064DAL169-I/HF - 200MHz 32-bit MCU 2MB Flash LFBGA-169 | Microchip

The Microchip PIC32MZ2064DAL169-I/HF is a high-integration 32-bit MIPS microAptiv PIC microcontroller in the family MAC's PIC32MZ Graphics (DAK/DAL/DAR/DAS) line, offering up to 200 MHz core speed, 2 MB of Flash, and 640 KB of SRAM in a 169-pin LFBGA (11x11 mm) package. The device integrates an on-chip Graphics Controller and Graphics Processor, an external DDR2 DRAM interface (up to 32 MB or 128 MB addressable), a 12-bit 18 MSPS ADC with up to 45 analog inputs, USB 2.0 High-Speed, CAN, and 120 digital I/O lines. A microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory (Flash), data memory (SRAM), and a wide range of peripherals such as ADC, timers, communication controllers, and GPIOs. PIC32MZ DAL devices sit at the high end of Microchip's PIC32 line, with 32-bit MIPS cores and peripherals aimed at GUI designs, industrial HMI, and audio/video processing. Within the broader taxonomy they are members of the embedded microcontroller family -> 32-bit microcontroller -> graphics-enabled MCU -> semiconductor. Key features of the PIC32MZ2064DAL169-I/HF include 2 MB Flash for code and graphics assets, 640 KB SRAM for frame buffers, a 12-bit 18 MSPS ADC supporting up to 45 analog channels, an integrated Graphics Processing Unit (GPU) with dedicated DDR2 controller, and a peripheral set that includes High-Speed USB 2.0, two CAN modules, multiple SPI/I2C/UART channels, and up to 9 PWM outputs. The card runs at up to 200 MHz with MIPS32 microAptiv instructions, delivering MPU-class performance while remaining programmable as a single-chip MCU. In terms of architecture, the device couples a single-core MIPS32 microAptiv with a parallel GPU/display pipeline. The integrated DDR2 controller supports up to 32 MB on-chip or 128 MB externally addressable memory, freeing the main bus for CPU-bound tasks. The 12-bit 18 MSPS ADC is suitable for general analog sensing, while the graphics block accelerates JPEG decoding, alpha blending, and LCD/3D rendering without burdening the CPU. Key applications include industrial control HMI panels, medical patient monitors, automotive infotainment clusters, point-of-sale terminals, and graphics-rich embedded products. The wide peripheral mix and DDR2 memory support make it ideal for systems with TFT LCDs needing fast image processing. Design tip - the LFBGA-169 package requires careful PCB design with matched-impedance routing and proper DDR2 trace length matching for reliable high-speed operation. This page synthesizes distributor stock and pricing, drop-in alternative MCUs from the PIC32MZ family, and practical design notes not found in the manufacturer datasheet alone.

RFQ צור קשר

PIC32MZ2064DAL176-I/2J

PIC32MZ2064DAL176-I/2J - 200MHz 32-bit MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2064DAL176-I/2J is a high-performance 32-bit microcontroller from the PIC32MZ Graphics (DA) family, featuring a MIPS32 microAptiv core running at 200 MHz, 2 MB of internal Flash and 640 KB of SRAM in a 176-pin LQFP (20x20 mm) package. According to DigiKey listing data, the part integrates 2 MB of program memory, 640 KB of data RAM, and a 32-bit single-core microAptiv processor targeted at GUI and graphics-rich embedded applications. The DAL176 device supports an operating voltage range of 1.7V to 1.9V (1.8V typical) and provides up to 120 general-purpose I/O pins for peripheral expansion. A 32-bit microcontroller (MCU) is a microprocessor integrated with Flash memory, RAM, peripherals, and I/O on a single die. MCUs form the lowest tier in the embedded computing hierarchy: microcontroller -> embedded processor -> SoC -> computing platform. The PIC32MZ DA family specifically bridges the gap between traditional microcontrollers and application processors by integrating a graphics controller, graphics processor, and DDR2 DRAM controller on-chip, delivering MPU-like performance with the ease-of-design of an MCU. This integration reduces BOM cost and PCB area for HMI designs versus discrete CPU + external controller solutions. Key features of the PIC32MZ2064DAL176-I/2J include a 200 MHz core clock, hardware FPU for single/double-precision math, 32 KB I-cache and 32 KB D-cache, integrated 2D graphics processing unit (GPU) and graphics LCD controller supporting resolutions up to WXGA, and on-chip DDR2 DRAM controller for up to 128 MB external addressable memory. Peripherals include USB 2.0 High-Speed OTG, CAN 2.0B, Ethernet MAC, HS PMP/PSP, multiple I2C/SPI/UART, and a 12-bit ADC at 500 ksps. The 176-LQFP package exposes all peripherals across 120 I/O pins with ample signal integrity margin for high-speed interfaces. Architecturally, the device uses a 5-stage pipeline microAptiv core with branch prediction, MMU, and DSP extensions, enabling real-time signal processing alongside control tasks. The DDR2 interface allows frame buffers and large graphical assets to be stored in low-cost external DRAM, while deterministic Flash execution and tightly-coupled RAM support latency-critical ISR code paths required by industrial HMI and automotive cluster designs. Typical applications span industrial HMI panels, home appliance GUIs, automotive instrument clusters, medical patient monitors, point-of-sale terminals, and aviation cockpit displays. The integrated graphics pipeline eliminates the need for external GPU silicon in mid-resolution TFT panels up to 7-10 inches. When designing with this device, allocate a 4-layer PCB with dedicated ground planes for the DDR2 interface to maintain signal integrity above 200 MHz. Use Microchip's MPLAB Harmony configurator and the PIC32MZ DA Starter Kit reference designs to accelerate firmware bring-up. Ensure the 1.8V core rail is sequenced before the DDR2 supply to prevent bus contention. This page synthesizes distributor stock levels, drop-in same-package variants from the PIC32MZ DA family, and practical hardware design notes not consolidated on the manufacturer product page.

RFQ צור קשר

PIC32MZ2064DAL176-V/2J

PIC32MZ2064DAL176-V/2J - 200MHz 32-Bit Graphics MCU | Microchip

The Microchip Technology PIC32MZ2064DAL176-V/2J is a high-performance 32-bit microcontroller from the PIC32MZ DA (Display, Audio) family, based on the MIPS32 microAptiv core running up to 200 MHz. It integrates 2 MB of Flash and 640 KB of SRAM, an integrated Graphics Controller and Graphics Processor, a 12-bit 18 MSPS ADC with up to 45 analog inputs, plus CAN and Hi-Speed USB on-chip peripherals, all housed in a 176-pin LQFP (20x20 mm) package. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, data RAM, and peripheral interfaces onto one silicon die. The PIC32MZ DA family sits at the upper end of Microchip's MCU portfolio, targeting applications that traditionally required an MPU plus external peripherals. It belongs to the system hierarchy: microcontroller -> embedded controller -> semiconductor. Compared with simpler Cortex-M0+ class devices, parts like the PIC32MZ DA deliver MPU-class throughput, on-chip DDR2 DRAM controller support, and a dedicated graphics pipeline that simplifies GUI development. Key differentiating features of this part include: 200 MHz core clock with hardware multiply/divide and DSP extensions, integrated 2D Graphics Processing Unit (GPU) with hardware-accelerated rendering, up to 45 analog channels on the 12-bit 18 MSPS ADC, dual CAN 2.0b controllers, Hi-Speed USB 2.0 with on-chip transceiver, and a parallel external bus interface supporting 32 MB or 128 MB of external DDR2 DRAM. The LQFP-176 footprint (20x20 mm) exposes 142 GPIO-capable pins, leaving ample headroom for parallel display, touch, and storage expansion. The part is built on a low-power CMOS process and includes multiple low-power modes (Sleep, Idle, Doze) plus a wide operating voltage range of 1.7 V to 1.9 V core with 3.3 V I/O. The graphics pipeline accelerates blit, fill, and alpha-blend operations in hardware, offloading the CPU from framebuffer manipulation and freeing it for application logic. Typical applications include industrial HMI panels, automotive instrument clusters, point-of-sale terminals, medical patient monitors, and any embedded GUI requiring smooth animations at WVGA or higher resolutions. The integrated ADC and CAN peripherals also suit sensor aggregation and vehicle body controllers. When designing with this part, plan pin assignments early: the parallel graphics bus, external memory bus, and ADC inputs compete for the same GPIO. Use the MPLAB Harmony 3 configuration tool to manage peripheral multiplexing and clock trees. Provide bulk decoupling on the 1.8 V core rail and the 3.3 V I/O rail to keep switching noise out of the analog inputs. This page synthesizes distributor pricing, drop-in alternatives, application recommendations, and practical design notes that go beyond the manufacturer datasheet, supporting faster component selection and design-in decisions.

RFQ צור קשר

PIC32MZ2064DAL176T-V/2J

PIC32MZ2064DAL176T-V/2J - 200MHz 32-bit MCU, 2MB Flash, 176-LQFP

The Microchip Technology PIC32MZ2064DAL176T-V/2J is a 32-bit MIPS32 microAptiv PIC32MZ DAL microcontroller operating at 200MHz, integrating 2MB Flash and 640KB SRAM in a 176-pin LQFP (20x20mm) package. It belongs to the PIC32MZ Graphics (DAK/DAL/DAR/DAS) family, offering MPU-class performance with MCU design simplicity for graphical HMI and industrial applications. What is a PIC32MZ DAL microcontroller? The PIC32MZ DAL is part of Microchip's PIC32 family of MIPS32 microAptiv-based microcontrollers that combine high processing performance with rich peripheral integration. In the broader taxonomy, it sits at: PIC32MZ DAL -> 32-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. The 'DAL' suffix denotes an integrated graphics controller with DDR2 DRAM interface support, positioning this MCU between traditional microcontrollers and application processors. Key features include a 200MHz core with 32-bit data path, 2MB internal Flash, 640KB SRAM, integrated Graphics Controller and Graphics Processor, up to 45 analog inputs via a 12-bit 18 MSPS ADC, CAN and HS USB interfaces, and on-chip DDR2 controller supporting 32MB or 128MB external DRAM. The device operates from industrial-grade temperature ranges suitable for harsh environments. Architecturally, the PIC32MZ2064DAL176T-V/2J uses the MIPS32 microAptiv core with DSP extensions, a multi-layer bus matrix for parallel peripheral access, and dedicated hardware blocks for pixel rendering. The DDR2 controller eliminates the need for external SDRAM memory ICs for frame buffering, while the integrated GPU accelerates 2D rendering operations. Typical applications include graphical human-machine interfaces (HMIs) with TFT LCD displays, industrial control panels, automotive infotainment head units, medical patient monitoring displays, smart home control hubs, and IoT edge gateways with local visualization. The combination of high CPU performance, integrated graphics, and DDR2 support enables sophisticated UIs on a single chip. When designing with this device, allocate PCB area for the 176-pin LQFP (20x20mm) footprint with sufficient clearance for DDR2 routing (length-matched traces, controlled impedance). Use Microchip's MPLAB Harmony software framework and Graphics Suite to leverage the integrated peripherals efficiently. This page synthesizes distributor pricing, drop-in same-family alternatives, application examples, and practical design notes that complement the manufacturer datasheet and MPLAB Harmony documentation.

RFQ צור קשר

PIC32MZ2064DAR169-I/6J

PIC32MZ2064DAR169-I/6J - 200MHz 32-bit Graphics MCU, 2MB Flash | Microchip

The Microchip Technology PIC32MZ2064DAR169-I/6J is a high-performance 32-bit MIPS32 microAptiv PIC32MZ DAR microcontroller running at 200 MHz with 2 MB of Flash and integrated graphics peripherals, housed in a 169-pin LFBGA (11x11 mm) package. The part operates from 1.8V/3.3V rails and provides 640 KB of SRAM, an integrated Graphics Controller and Graphics Processor, an on-chip 32 MB or 128 MB externally addressable DDR2 DRAM interface, a 12-bit 18 MSPS ADC with up to 45 analog inputs, plus HS USB and CAN. What is a 32-bit microcontroller? A 32-bit microcontroller (MCU) is an embedded processor with a 32-bit data path, register file, and address space, allowing it to handle larger data words, more complex firmware, and richer peripheral sets than 8-bit or 16-bit MCUs. In the taxonomy: microcontroller -> embedded MCU -> 32-bit MCU -> MIPS-based MCU -> graphics MCU -> PIC32MZ DAR family. The PIC32MZ DAR line targets graphical HMI and TFT-display applications that previously required an MPU plus external graphics controller. Key features include the integrated DDR2 memory controller that offloads external SDRAM management from firmware, the 12-bit 18 MSPS ADC that simultaneously samples multiple analog inputs, the hardware graphics pipeline that accelerates TFT-LCD refresh, and HS USB plus CAN for industrial and automotive connectivity. The 169-LFBGA package enables a small 11x11 mm footprint despite the high pin count. The PIC32MZ2064DAR169 architecture combines a MIPS32 microAptiv core with tightly coupled SRAM, a multi-channel DMA controller, and a dedicated Graphics Processing Unit. Hardware crypto and a true RNG are available on the DA1 sub-family for secure applications, while the 200 MHz core delivers up to 330 DMIPS and 1.66 DMIPS/MHz. Typical applications include industrial HMI panels, medical patient monitors, automotive cluster displays, IoT gateways with TFT-LCDs, and POS terminals. The device is also suited for graphical IoT edge nodes that need local display rendering without an MPU. When designing with this MCU, allocate careful PCB layout for the LFBGA and DDR2 interface - use matched-length traces and reference-controlled impedance. Plan boot-time DDR2 training and configure the integrated charge-pump regulator before enabling the LCD panel. This page synthesizes distributor pricing, drop-in alternatives within the PIC32MZ DAR family, and practical layout notes not found in the manufacturer datasheet alone.

RFQ צור קשר

PIC32MZ2064DAR176-I/2J

PIC32MZ2064DAR176-I/2J - 32-bit 200MHz MCU, 2MB Flash, 176-LQFP | Microchip

The Microchip Technology PIC32MZ2064DAR176-I/2J is a 32-bit MIPS32 microAptiv PIC32MZ DAR microcontroller operating at 200 MHz with 2 MB of Flash and 640 KB of on-chip SRAM, integrating an external 32 MB DDR2 DRAM interface and a hardware Graphics Controller plus Graphics Processor. It is housed in a 176-pin LQFP (20x20 mm) industrial-temperature package with 120 user I/O lines. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a high-performance CPU core, on-chip memory, peripherals, and interrupt controllers into one IC. The PIC32MZ DA family specifically targets graphical HMI applications by combining an MCU-style ease of design with MPU-class performance, occupying the hypernym hierarchy microcontroller -> 32-bit MCU -> MIPS MCU -> PIC32MZ family. The integrated DDR2 controller eliminates external memory chips, while the Graphics Controller and GPU accelerate pixel rendering on TFT displays without taxing the CPU. Key features include 200 MHz core clock, 2 MB Flash, 640 KB SRAM, stacked 32 MB external DDR2 DRAM, integrated Graphics Controller with 2D Graphics Processor, six UART, six SPI, six I2C, USB 2.0 high-speed OTG, two CAN 2.0b ports, Ethernet MAC, and a 12-bit 18 MSPS ADC. The 176-LQFP industrial-grade (-40C to +85C) package exposes 120 GPIO pins for high pin-count peripherals and parallel display buses. Architecturally, the part uses the MIPS32 microAptiv core with DSP extensions, dual IPU/IOMUX engines for flexible pin assignment, and a dedicated DDR2 PHY capable of 533 MHz data rate. The graphics subsystem includes blit/composite hardware for hardware-accelerated UI rendering. Power is managed through multiple low-power modes and a wide 2.6V-3.6V operating range. Typical applications include industrial HMI panels, automotive instrument clusters, medical graphical terminals, point-of-sale terminals, and home automation touch panels. The integrated DDR2 and GPU make it ideal for GUI designs on TFT LCDs from QVGA to XGA resolution. When designing with this MCU, allocate sufficient PCB area for the DDR2 routing (controlled impedance, length matching, and VREF decoupling), and provide a clean 3.3V supply with bulk + bypass capacitors per Microchip's DDR2 reference design. This page synthesizes distributor pricing, same-family drop-in alternatives, and DDR2 routing design notes not found in the manufacturer datasheet alone.

RFQ צור קשר

PIC32MZ2064DAR176-V/2J

PIC32MZ2064DAR176-V/2J - 32-bit 200MHz MCU, 2MB Flash, LQFP-176 | Microchip

The Microchip PIC32MZ2064DAR176-V/2J is a 32-bit MIPS32 microAptiv PIC32MZ DAR graphics microcontroller running at 200 MHz, integrating 2 MB of Flash, 640 KB of SRAM, and a stacked 32 MB or 128 MB DDR2 DRAM in a 176-pin LQFP (20x20 mm) package. The V-temp grade variant targets industrial temperature ranges, while the device itself targets MPU-class GUI performance with the ease of an MCU design flow. What is a PIC32MZ DAR microcontroller? The PIC32MZ DAR belongs to the PIC32MZ Graphics (DAK/DAL/DAR/DAS) family of 32-bit microcontrollers from Microchip Technology. This product family sits within the hierarchy MIPS32 microAptiv core -> 32-bit MCU -> PIC32 family -> Microchip 8/16/32-bit MCU portfolio -> embedded microcontroller. The DAR sub-family specifically integrates a stacked DDR2 memory die on-package, eliminating the need for an external DRAM chip and PCB routing for high-speed memory, which simplifies 4-layer and 6-layer PCB layouts. Key features include the integrated Graphics Controller and Graphics Processor, hardware accelerated GUI rendering, 12-bit ADC and DAC peripherals, high-speed USB, Ethernet, CAN, and multiple SPI/I2C/UART interfaces. The 200 MHz core delivers up to 330 DMIPS and 3.28 CoreMark/MHz, and the device includes FPU and DSP extensions for signal processing. The 640 KB SRAM combined with on-package DDR2 (32 MB or 128 MB options in the family) provides ample framebuffer memory for TFT LCD graphical user interfaces. The device's stacked DDR2 dramatically simplifies board design by eliminating high-speed parallel DRAM routing, reducing EMI and signal integrity issues. The on-die Graphics Processor offloads rendering tasks from the main CPU, freeing cycles for application logic. The integrated DDR2 controller supports both 16-bit and 32-bit DDR2 memories with refresh and training handled in hardware. Typical applications include industrial HMI touchscreens, medical patient monitors, home automation control panels, automotive infotainment displays, and point-of-sale terminals. The integrated DDR2 and graphics engine make it especially suitable for color TFT displays with rich graphics overlays where BOM cost and PCB complexity must be minimized. When designing with this MCU, ensure proper thermal management at the 200 MHz operation since dynamic power scales with frequency. Use the MPLAB Harmony framework for driver and middleware integration, and consult the PIC32MZ DA Graphics (DAK/DAL/DAR/DAS) Family datasheet for DDR2 layout guidelines, including controlled impedance and length-matched traces for stable operation. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the manufacturer datasheet alone, including cross-package and cross-temperature-grade comparisons that help procurement and engineering teams make informed selection decisions.

RFQ צור קשר

PIC32MZ2064DAR176T-V/2J

PIC32MZ2064DAR176T-V/2J - 32-Bit 200MHz MCU, 2MB Flash | Microchip

The Microchip Technology PIC32MZ2064DAR176T-V/2J is a 32-bit MIPS32 microAptiv PIC32MZ DA microcontroller running at 200 MHz with 2 MB of Flash and 640 KB of SRAM, housed in a 176-pin LQFP (20x20 mm) package. It integrates a 2D Graphics Controller, a Graphics Processor, and stacked DDR2 DRAM for GUI-capable embedded designs. A microcontroller (MCU) is a self-contained computer on a single chip that combines a processor core, program memory (Flash), data memory (SRAM), and peripherals such as timers, serial interfaces, and analog blocks. Within the semiconductor taxonomy, the PIC32MZ DA sits at MCU -> 32-bit microcontroller -> embedded processor -> integrated circuit, and it uniquely bridges the MCU and microprocessor (MPU) classes by pairing a 200 MHz MIPS32 microAptiv core with an integrated graphics pipeline and on-chip DDR2 memory. Key features include 2 MB Flash, 640 KB SRAM, 200 MHz operation, an integrated Graphics Controller and Graphics Processor, and stacked DDR2 DRAM (32 MB or 128 MB externally addressable). The V/2J suffix denotes the extended V-temperature grade and the 176-pin LQFP (20x20) package, while the trailing T indicates tape-and-reel packaging. The PIC32MZ DA family uses a cache-based MIPS32 microAptiv core with a floating-point unit, delivering MPU-like performance while retaining MCU ease of design. The integrated graphics engine offloads pixel composition from the CPU, enabling rich human-machine interfaces (HMI) without an external display controller, and the stacked DDR2 removes the need for external frame-buffer memory in many designs. Typical applications include industrial HMI panels, medical patient monitors, automotive instrument clusters, smart-home control panels, point-of-sale terminals, and IoT gateway devices with graphical displays. The combination of 200 MHz compute, 2 MB Flash, and integrated graphics makes it well suited to GUI-centric embedded products. When designing with this device, pay close attention to the DDR2 memory interface routing and the 176-pin LQFP thermal pad, and verify the V-temperature grade against the target operating environment. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ צור קשר

PIC32MZ2064DAS169-I/6J

PIC32MZ2064DAS169-I/6J - 200MHz 32-bit MCU 2MB Flash 169-LFBGA | Microchip

The Microchip Technology PIC32MZ2064DAS169-I/6J is a high-performance 32-bit MIPS32 microAptiv PIC microcontroller from the PIC32MZ DA family, delivering 200 MHz CPU performance with 2 MB Flash and 640 KB SRAM in a 169-pin LFBGA (11x11 mm) package. It integrates a stacked 32 MB DDR2 DRAM interface (the 'S' suffix denoting on-package DRAM), an integrated Graphics Controller, dedicated Graphics Processor, and a 12-bit 18 MSPS ADC with up to 45 analog input channels. A 32-bit microcontroller (MCU) is an integrated circuit that combines a 32-bit CPU core, program and data memory, and a rich set of peripheral interfaces on a single silicon die. The PIC32MZ DA family belongs to the broader hierarchy: microcontroller -> embedded processor -> system-on-chip (SoC) -> semiconductor. It targets graphical HMI and connected-embedded workloads where traditional MCUs lack the bandwidth for parallel display driving and where discrete MPUs impose additional complexity. The 'DAS' sub-family specifically denotes parts that integrate the stacked DDR2 memory, while 'DAH' parts use an external DDR2 interface only. Key features include 2 MB Flash with live-update support, 640 KB SRAM, a hardware crypto accelerator for AES/SHA, an integrated TFT LCD controller with dedicated 2D graphics processor, Hi-Speed USB 2.0 device/host/OTG, two CAN 2.0b controllers, six UART/SPI/I2C modules, twelve 16-bit timers, and a 12-bit 18 MSPS ADC with up to 45 analog input channels. The 169-LFBGA package exposes 120 general-purpose I/O pins, supports multiple I/O voltage domains from 1.8 V to 3.3 V, and provides a 24-bit address bus for the integrated DDR2 controller. Architecturally, the PIC32MZ2064DAS169-I/6J implements the MIPS32 microAptiv core with DSP and FPU enhancements, a dual-issue pipeline, hardware multiply-accumulate, and 16 KB I-cache plus 16 KB D-cache. The integrated DDR2 memory interface and dedicated graphics peripherals eliminate the need for an external memory controller, allowing designers to allocate the full 32 MB of stacked DDR2 to framebuffer, texture, or general-purpose data storage while the CPU executes graphical workloads at full bus efficiency. Typical applications include graphical human-machine interfaces (HMIs) on industrial equipment, smart home control panels, automotive infotainment displays, medical patient-monitoring terminals, point-of-sale (POS) terminals, and IoT edge devices requiring on-device rendering. The integrated crypto engine and secure boot features also make the part suitable for connected products that must meet evolving security and firmware-authentication requirements. When designing with this MCU, allocate the four DDR2 supply rails (VDD_DDR, VTT, VREF) with careful decoupling and matched-length routing to maintain signal integrity. The 169-LFBGA's 0.8 mm ball pitch demands a multilayer PCB with microvia stack-ups; a 4-layer 1 oz copper stack is the minimum recommended. Always validate DDR2 timing margins against the IBIS model before committing to layout. This page synthesizes distributor pricing, datasheet specifications, drop-in same-package alternatives from the PIC32MZ DA family, and practical design guidance not aggregated on standard distributor listings.

RFQ צור קשר

PIC32MZ2064DAS169-V/6J

PIC32MZ2064DAS169-V/6J - 200MHz 32-bit MCU, 2MB Flash | Microchip

The Microchip PIC32MZ2064DAS169-V/6J is a 200 MHz 32-bit graphics microcontroller from the PIC32MZ Graphics (DAK/DAL/DAR/DAS) family, integrating 2 MB of Flash, 640 KB of SRAM, an integrated Graphics Controller and Graphics Processor, and a stacked 32 MB or 128 MB DDR2 DRAM in a 169-ball LFBGA (11x11 mm) package. It is targeted at MPU-class graphical user interface (GUI) applications where designers want MCU ease-of-use with MPU performance. A 32-bit MCU (microcontroller unit) is a single-chip computer that integrates a 32-bit processor core, Flash program memory, SRAM data memory, and a rich peripheral set on one die. Within the embedded hierarchy, PIC32MZ devices sit above 8/16-bit MCUs and below application processors, balancing deterministic real-time behavior with enough throughput to drive large color TFT displays, run connectivity stacks, and host small embedded GUIs. The PIC32MZ DA family specifically adds an LCD controller, a 2D Graphics Processor (GPU), and DDR2 memory interface, making it a true graphics MCU. Key features of the PIC32MZ2064DAS169 include a MIPS32 microAptiv core running at 200 MHz with I-cache and D-cache, a 12-bit 18 MSPS ADC with up to 45 analog inputs, a Hi-Speed USB 2.0 OTG controller, two CAN modules, and a hardware crypto accelerator. The on-chip stacked DDR2 eliminates the need for an external SDRAM chip, simplifying PCB layout and reducing BOM cost. Architecturally, the device pairs a high-performance CPU subsystem with a dedicated graphics pipeline and DDR2 memory controller. The integrated GPU accelerates primitives, blits, and alpha blending, while the DDR2 controller handles high-bandwidth framebuffer access. The result is a single-chip platform capable of driving WVGA-resolution color displays without an external memory or graphics chip. Typical applications include industrial HMI panels, home appliances with color TFT displays, medical patient monitors, automotive infotainment clusters, point-of-sale terminals, and portable instrumentation. The wide peripheral set and large memory also make the device attractive for IoT gateways requiring on-board crypto and secure boot. When designing with this MCU, allocate a 4-layer PCB with a continuous ground plane for the DDR2 signals, follow the Microchip DDR2 routing guidelines in the family datasheet, and provide adequate bulk decoupling near the LFBGA. The -V/6J suffix indicates the V-temperature grade and 169-ball BGA package variant. This page consolidates distributor pricing, drop-in and same-package alternatives, and practical hardware design notes that are not found in the manufacturer datasheet alone, giving engineers a single authoritative source for sourcing and second-sourcing decisions.

RFQ צור קשר

PIC32MZ2064DAS169T-I/6J

PIC32MZ2064DAS169T-I/6J - 200MHz 32-bit MCU, 2MB Flash, Graphics | Microchip

The Microchip Technology PIC32MZ2064DAS169T-I/6J is a 32-bit MIPS32 microAptiv PIC microcontroller in the PIC32MZ Graphics (DAK/DAL/DAR/DAS) family, packaged in a 169-ball LFBGA (11x11 mm) and operating at up to 200 MHz. The device integrates 2 MB of Flash program memory, 640 KB of SRAM, and a stacked 32 MB DDR2 DRAM, plus an integrated Graphics Controller, Graphics Processor, 12-bit 18 MSPS ADC with up to 45 analog inputs, CAN, and Hi-Speed USB. What is a PIC32MZ Graphics MCU? PIC32MZ DA series microcontrollers are Microchip's high-performance 32-bit MCU family that combines MPU-class compute with the simplicity of an MCU. In the broader taxonomy they sit between traditional 32-bit microcontrollers and low-power MPUs, bringing on-chip peripherals (DDR2 controller, GPU, LCD controller, crypto engine) that historically required an external processor-plus-memory subsystem. The DAS family suffix indicates the stacked-DDR2 variant designed for embedded graphics and HMI workloads. Key differentiating features of the PIC32MZ2064DAS169T-I/6J include: 2 MB Flash with 640 KB SRAM plus 32 MB on-chip DDR2; integrated Graphics Processing Unit and LCD controller; 12-bit 18 MSPS ADC with up to 45 input channels; CAN 2.0B and Hi-Speed USB 2.0; MIPS32 microAptiv core with 200 MHz maximum clock; and an extended industrial operating temperature range of -40C to +85C. The 169-LFBGA package provides high-density I/O for graphics bus and parallel external memory expansion. Architecturally, the part leverages a MIPS32 microAptiv single-core implementation with hardware multiply/divide and a tightly-coupled DMA fabric feeding both the system bus and the on-chip DDR2 memory controller. This eliminates the need for an external SDRAM chip and shortens the signal path between the CPU and framebuffer memory, which directly improves GUI rendering latency and reduces PCB complexity. Typical applications for PIC32MZ2064DAS169T-I/6J include industrial HMI panels, automotive instrument clusters, medical patient monitors, smart appliance touch interfaces, point-of-sale terminals, and avionics/rail HMIs. Its combination of integrated graphics and DDR2 in a single BGA package makes it a strong fit when PCB real estate is constrained but a rich graphical UI is required. When designing in this part, pay close attention to the LFBGA-169 footprint (11x11 mm, 0.8 mm pitch). Microchip recommends 6-layer stack-up with impedance-controlled DDR2 routing and a continuous ground plane beneath the BGA. The internal DDR2 requires careful PCB layout - keep trace lengths matched within the controller's tolerance and follow the DDR2 power-decoupling network from the datasheet reference schematic. This page synthesizes real-time distributor pricing, drop-in same-package alternatives from the PIC32MZ DA family, and practical PCB layout/design guidance that goes beyond what is captured in the manufacturer datasheet alone.

RFQ צור קשר

PIC32MZ2064DAS169T-V/6J

PIC32MZ2064DAS169T-V/6J - 200MHz MCU, 2MB Flash, 169-LFBGA | Microchip

The Microchip PIC32MZ2064DAS169T-V/6J is a 32-bit MIPS32 microAptiv PIC32MZ DAS microcontroller integrating an on-chip 128 MB stacked DDR2 DRAM, 2 MB Flash, 640 KB SRAM, and a hardware graphics controller + GPU, housed in a 169-ball LFBGA (11x11 mm) package. It runs at 200 MHz, delivers MPU-class throughput for GUI workloads, and exposes HS USB, CAN, Ethernet, and 12-bit 18 MSPS ADC with up to 45 analog inputs. A PIC32MZ DAS-series MCU is a high-integration 32-bit microcontroller that combines traditional MCU peripherals with a parallel external-style DRAM interface, a 2D graphics controller, and a dedicated graphics processor, blurring the line between microcontroller and microprocessor. It belongs to the broader PIC32MZ family of MIPS-based microcontrollers and the wider class of 32-bit embedded processors used for industrial HMI and connected devices. Key features include 2 MB on-chip Flash with live update support, 640 KB SRAM, integrated 128 MB DDR2 DRAM for frame buffer and large graphics workloads, a 200 MHz core, hardware crypto accelerator, 12-bit ADC at 18 MSPS with up to 45 analog inputs, high-speed USB 2.0, CAN, and a 169-ball LFBGA package. The dedicated graphics controller + GPU removes host CPU overhead from frame composition, while the wide external bus unlocks large frame buffers without external SDRAM components. The architecture pairs a MIPS32 microAptiv core with an advanced bus matrix that fans out to the DDR2 controller, the graphics pipeline, and the peripheral set. The on-chip DDR2 and integrated display controllers significantly simplify multilayer PCB layout versus discrete MCU + external DDR solutions, reducing BOM and EMI risk. Crypto acceleration (AES/SHA) is provided for secure boot and TLS workloads. Typical applications include industrial HMI / operator panels with color TFT, automotive cluster displays, medical patient monitors, point-of-sale terminals, and connected IoT gateways requiring rich graphics. The wide ADC input count also makes it suitable for multi-channel data acquisition front ends. When designing, allocate PCB area and impedance-controlled routing for the DDR2 interface - signal integrity violations here are the dominant system-level failure mode. The graphics controller's pixel clock, bus width, and color depth must match the chosen TFT panel timing before commit. This page synthesizes XAIPART distributor pricing, drop-in same-brand alternatives, and practical interface design notes that supplement the Microchip datasheet and family reference manual.

RFQ צור קשר

PIC32MZ2064DAS176-I/2J

PIC32MZ2064DAS176-I/2J - 200MHz MCU, 2MB Flash, LQFP-176 | Microchip

The Microchip Technology PIC32MZ2064DAS176-I/2J is a high-performance 32-bit microcontroller from the PIC32MZ Graphics (DAK/DAL/DAR/DAS) family, built on the MIPS32 microAptiv core and integrating 2MB of Flash, 640KB of SRAM, and a 32MB stacked DDR2 DRAM in a 176-pin LQFP package (20x20 mm). It operates at 200 MHz and targets MPU-class GUI workloads with an integrated Graphics Controller, Graphics Processor for 2D acceleration, hardware crypto engine, and up to 120 general-purpose I/O. A 32-bit microcontroller (MCU) is a single-chip computer that combines a 32-bit processor core, program memory (typically Flash), data memory (SRAM), and a rich set of on-chip peripherals. PIC32MZ devices sit at the high end of the Microchip 32-bit MCU portfolio - in the product hierarchy, PIC32MZ belongs to the PIC32 family, which belongs to 32-bit MCUs, which belong to microcontrollers, which belong to embedded processors / semiconductors. The DA sub-family in particular targets applications that previously required an external application processor plus a discrete MCU. Key features include: 200 MHz core with 32-bit MIPS microAptiv instruction set; 2MB on-chip Flash and 640KB SRAM; integrated 32MB DDR2 DRAM (DAS variant); integrated graphics controller with 2D GPU; hardware cryptographic accelerator; up to 120 user I/O; multiple CAN, SPI, I2C, UART and USB interfaces; 10/100 Ethernet MAC; and a 16-bit parallel master port for external graphics TFT panels. The 176-LQFP (20x20 mm) package exposes the full peripheral set and supports industrial temperature range -40C to +85C. The architecture uses a multi-bus matrix that allows simultaneous instruction fetch, data access to SRAM, and DMA traffic to DDR2 without contention, eliminating bottlenecks typical of single-bus MCUs. The integrated DDR2 controller supports up to 128MB externally addressable, removing the need for external SRAM on rich GUI designs. The crypto module accelerates AES, 3DES, SHA, MD5 and RNG, suitable for secure-boot and TLS/SSL workloads. Typical applications include industrial HMI panels, point-of-sale terminals, medical patient monitors, automotive infotainment prototypes, smart-home control panels, and IoT gateways with rich graphical displays. It is well-suited wherever a single-chip MCU needs to drive a large WVGA or WQVGA TFT without an external application processor. Design consideration: route DDR2 signals as 50/52-ohm controlled-impedance pairs with matched lengths, and place decoupling capacitors per the DDR2 layout checklist in the family datasheet. Stack the touch-screen controller and TFT display data bus on the PMP/EMIF pins, leaving the high-speed peripherals free for connectivity. Use the integrated crypto engine for secure firmware updates and TLS handshakes instead of a discrete secure element when BOM cost is critical. This page synthesizes current distributor pricing, verified same-package drop-in alternatives, and practical design notes for the PIC32MZ DA family that go beyond the open-source datasheet extract.

RFQ צור קשר

PIC32MZ2064DAS176-V/2J

PIC32MZ2064DAS176-V/2J - 200MHz MCU 2MB Flash 32MB DDR2 | Microchip

The Microchip Technology PIC32MZ2064DAS176-V/2J is a 32-bit MIPS32 microAptiv microcontroller from the PIC32MZ Graphics (DAK/DAL/DAR/DAS) family, delivering MPU-class performance with the design simplicity of an MCU for human-machine interface (HMI) and graphical user interface (GUI) designs. The device integrates a 200 MHz CPU core, 2 MB of Flash program memory, 640 KB of SRAM, and a stacked 32 MB DDR2 DRAM, all in a 176-pin LQFP package measuring 20x20 mm. The integrated Graphics Controller and Graphics Processor pair with the on-chip DDR2 to support advanced HMI workloads without external memory. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and peripherals on one die. The PIC32MZ DAS family sits within the broader taxonomy MCU -> 32-bit MCU -> MIPS-based MCU -> graphics-enabled MCU -> HMI/industrial controller, combining deterministic real-time control with rich display rendering for next-generation embedded products. Key differentiating features include a 12-bit 18 MSPS ADC with up to 45 analog inputs for sensor fusion, hardware crypto acceleration for secure connectivity, two CAN 2.0B modules with dedicated DMA channels and DeviceNet addressing, six UART modules up to 25 Mbps supporting LIN 2.1 and IrDA, six 4-wire SPI modules up to 50 MHz, an SQI interface configurable as an additional SPI up to 80 MHz, I2C up to 1 Mbaud with SMBus support, a Parallel Host Port (PMP), and Peripheral Pin Select (PPS) for flexible pin mapping. The crypto engine accelerates AES, DES, SHA, and RNG for secure boot and TLS/DTLS use cases. Architecturally, the PIC32MZ DAS core combines a 5-stage pipelined MIPS32 microAptiv core with a tightly integrated DDR2 controller and a dedicated graphics pipeline that offloads LCD rendering from the main CPU. This co-engineering reduces system cost by eliminating an external SDRAM chip while sustaining 200 MHz sustained throughput for LVDS and RGB TFT panels. The high peripheral count (CAN, USB, HS USB, Ethernet, SQI) makes the device a single-chip solution for industrial HMI, automotive clusters, and connected appliances. Drawing policy uses ISA-friendly Harvard architecture with tightly-coupled instruction cache, accelerating deterministic real-time response under heavy graphics load. Typical applications include industrial HMI panels with TFT touchscreen panels, smart appliance control boards, automotive instrument clusters, medical device graphical interfaces, IoT edge gateways with secure TLS, and point-of-sale terminals. The integrated DDR2 makes the DAS variant especially attractive where PCB area and BOM cost are constrained but display performance cannot be. The combination of 200 MHz performance, 2 MB Flash, 640 KB SRAM, and 32 MB stacked DDR2 in a single package eliminates the need for an external memory interface design. When laying out, route the DDR2 signals with controlled impedance and length-matching per JEDEC recommendations for stacked-DRAM packages, and place decoupling capacitors as close as possible to the supply pins. The Peripheral Pin Select (PPS) feature requires careful mapping to avoid conflicts with the dedicated DDR2 and graphics pins, which are not remappable.

RFQ צור קשר

PIC32MZ2064DAS176T-I/2J

PIC32MZ2064DAS176T-I/2J - 200MHz MCU, 2MB Flash, 32MB DDR2 | Microchip

The Microchip Technology PIC32MZ2064DAS176T-I/2J is a 32-bit MIPS32 microAptiv PIC32MZ DAS series microcontroller integrating 2MB Flash, 640KB SRAM, and an on-chip 32MB DDR2 DRAM controller, housed in a 176-pin LQFP (20x20mm) package with exposed thermal pad. It operates at up to 200MHz, delivers MPU-class performance with MCU-class ease of use, and integrates a Graphics Controller, Graphics Processor, 12-bit 18 MSPS ADC with up to 45 analog inputs, HS USB, and CAN interfaces. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals. The PIC32MZ DAS family positions itself between an MCU and an MPU by combining deterministic real-time control with high-throughput graphics processing, sitting at the top of the power management and embedded hierarchy: MCU -> embedded processor -> 32-bit MIPS application processor -> mixed-signal SoC. Its integrated DDR2 controller eliminates the need for an external memory chip, simplifying PCB layout for graphical HMI designs. Key features include the 200MHz MIPS32 microAptiv core with 5-stage pipeline, 32MB on-chip DDR2 DRAM (with a 128MB externally addressable option), integrated 2D Graphics Processing Unit (GPU) supporting HMI rendering up to WXGA resolution, 12-bit 18 MSPS ADC with 45 analog inputs for mixed-signal data acquisition, Hi-Speed USB 2.0 with on-chip PHY, two CAN 2.0B modules, Ethernet MAC, and a 176-pin LQFP package with -40C to +85C industrial temperature rating. The architecture uses a 5-stage MIPS32 microAptiv core backed by 32KB I-cache and 32KB D-cache, a dedicated graphics DMA engine, dual DDR2 controllers, and a peripheral bus that supports up to 45 analog inputs via the 12-bit 18 MSPS ADC. The integrated Graphics Controller and Processor handle full HMI rendering without taxing the CPU. Typical applications include industrial HMI panels, graphical medical instrumentation, automotive infotainment displays, building automation touch panels, point-of-sale terminals, and ruggedized portable instrumentation. The DDR2 integration is particularly advantageous in space-constrained GUI designs where board real estate is at a premium. When designing with this device, allocate adequate PCB area for the LQFP-176 footprint and route DDR2 signals with controlled impedance on inner layers. Use the MPLAB Harmony framework to leverage the integrated graphics stack and avoid manual register configuration of the GPU pipeline. This page synthesizes distributor pricing, drop-in alternatives from the same PIC32MZ DA family, and practical design notes not found in the manufacturer datasheet.

RFQ צור קשר

PK10FN1M0VMD12

PK10FN1M0VMD12 - Kinetis K10 120MHz 1MB Flash MCU | NXP

The NXP (formerly Freescale) PK10FN1M0VMD12 is a 32-bit ARM Cortex-M4 microcontroller from the Kinetis K10 sub-family, operating at up to 120 MHz with 1 MB of embedded Flash and 128 KB of SRAM in a 144-pin MAPBGA (13x13 mm) package. It is part of the K10 entry-level performance MCU family aimed at cost-sensitive industrial and consumer applications that need Cortex-M4 DSP capability and a rich peripheral set. A microcontroller (MCU) is an integrated circuit that combines a processor core, program and data memory, and a wide range of peripherals (timers, ADCs, communication blocks, GPIOs) on a single die. Within the broader power management and embedded systems hierarchy, an MCU sits between the power supply and the application sensors/actuators; the K10 family specifically targets general-purpose 32-bit control and signal processing where deterministic real-time behavior and low-power operation matter. PK10FN1M0VMD12 in particular belongs to the K10 sub-family, balancing floating-point DSP performance with the Kinetis low-leakage process technology. Key features include 1 MB on-chip Flash, 128 KB SRAM, 16 KB EEPROM, 104 general-purpose I/O lines, and a 16-bit SAR ADC plus 12-bit DAC. The device integrates a hardware FPU (single-precision), DMA controllers, multiple serial communication peripherals (UART, SPI, I2C), USB, CAN, and an external bus interface. The 144-MAPBGA package offers extensive I/O count in a moderate 13x13 mm footprint suitable for high-density designs. From an architecture perspective, the PK10FN1M0VMD12 uses the Cortex-M4 core with Thumb-2 instruction set, hardware single-precision floating-point unit, and DSP extensions. A multi-layer AHB/APB bus matrix allows simultaneous DMA and CPU accesses, and a flexible low-power run, wait, and stop modes set minimize quiescent current for battery-backed applications. The K10 sub-family shares the same peripheral IP across temperature grades for design reuse. Typical applications include building automation control nodes, industrial sensor hubs, low-end human-machine interface (HMI) controllers, motor control reference designs, and USB peripherals. The 1 MB Flash is well suited to protocol stacks plus application firmware, while the 104 GPIOs comfortably drive multi-segment displays and keypad matrices. Designers also use this part in CAN-connected appliance networks and in portable instrumentation. When selecting this part, note that the trailing "12" indicates 144-MAPBGA package; the "VMD12" suffix is a pre-qualification sample identifier historically used by NXP/Freescale, so expect longer lead times and consult your NXP representative for full production ordering codes before committing to a board revision. This page synthesizes distributor pricing, parametric comparison, and practical design context not found in the manufacturer datasheet alone.

RFQ צור קשר

PK20X256VMD100

PK20X256VMD100 - Kinetis K20 ARM Cortex-M4 MCU 256KB Flash | NXP

The NXP (formerly Freescale) PK20X256VMD100 is an ARM Cortex-M4 based Kinetis K20 series microcontroller delivering up to 100 MHz core performance with DSP instructions, 256 KB of program Flash and 64 KB of SRAM, housed in a 144-pin MAPBGA (13x13 mm) package. Operating from 1.8V / 2.5V / 3.3V supplies across a 0V to 105C ambient range, it integrates 100 general-purpose I/O pins plus USB, CAN, I2C, SPI, UART and a 16-bit ADC subsystem. What is a Kinetis K20 microcontroller? The K20 sub-family sits inside the broader Kinetis portfolio of ARM Cortex-M4 microcontrollers from NXP Semiconductors. It is a low-power, mixed-signal MCU tier designed for applications that need DSP class math throughput, large volatile and non-volatile memories, USB connectivity, and rich analog peripherals, bridging the gap between 8/16-bit legacy MCUs and full application processors. Within the Kinetis hierarchy (K-series), the K20 occupies the mainstream tier: Cortex-M4 + DSP -> Kinetis family -> ARM Cortex-M MCU -> 32-bit microcontroller -> embedded processor. Key features include single-precision floating point unit (FPU), 1.25 Dhrystone MIPS per MHz, hardware multiplication/accumulation, low-leakage wake-up unit with multiple low-power modes, and a 12-bit DAC on selected variants. The 144-MAPBGA package exposes 100 user I/Os and supports an external memory bus for parallel SRAM/Flash expansion, a capability that smaller QFP/LQFP K20 parts lack. Architecturally the K20 uses a Cortex-M4 core with tightly coupled memories, a multi-layer AHB-Lite bus matrix, and dedicated peripherals on separate bridge buses so that DMA and interrupt traffic do not starve the CPU. The 256 KB Flash is single-bank with EEPROM emulation capability, and the 64 KB SRAM is split between general purpose, USB endpoint, and L2 cache for the external bus controller. Typical applications include industrial control and HMI panels, USB peripherals, low-power metering, secure point-of-sale terminals, automotive body and chassis ECUs (on Q100 variants), and medical sensor aggregation. The DSP extensions make it well suited to digital filters and audio processing. When designing with this device, allocate PCB layer budget for the 0.8 mm pitch BGA - at least 4 layers with continuous ground stitching under the package. Confirm your toolchain (IAR, Keil, MCUXpresso, GCC) supports the specific K20 mask revision before board bring-up, since early silicon revisions required errata workarounds for the FlexTimer and I2C peripherals. This page synthesizes distributor pricing, parametric drop-in alternatives, and K20 family design notes not collected in any single manufacturer or distributor document.

RFQ צור קשר

PK30N512VMD100

PK30N512VMD100 - 100MHz Cortex-M4 512KB MCU | NXP

NXP Semiconductors PK30N512VMD100 is a 32-bit ARM Cortex-M4 Kinetis K30 microcontroller operating up to 100 MHz, with 512 KB of programmable Flash and 128 KB of RAM, in a 144-MAPBGA package measuring 13 x 13 mm. The device provides 102 I/O connections and integrates CANbus, EBI/EMI, I2C, IrDA, SD, SPI, UART/USART, DMA, I2S, LCD, LVD, POR, PWM, and watchdog functions. A microcontroller is a programmable system-on-chip that combines a processor core, nonvolatile program memory, volatile data memory, and peripheral interfaces on one semiconductor device. The PK30N512VMD100 belongs to the Kinetis K30 family and sits within the hierarchy of ARM Cortex-M4 embedded processor, 32-bit microcontroller, embedded systems controller, and semiconductor. Its combination of memory and communication peripherals supports compact control systems that must handle both control logic and external serial devices. Verified device features include a 100 MHz clock, 512 KB Flash organized as 512K x 8, 128K x 8 RAM, and 102 I/O pins. Listed connectivity includes CANbus, EBI/EMI, I2C, IrDA, SD, SPI, and UART/USART. Listed peripherals include DMA, I2S, an LCD controller, low-voltage detection, power-on reset, PWM, and a watchdog timer. These interfaces make the MCU applicable to industrial control, communications, display-oriented embedded equipment, audio data handling, and motor or power-control systems. The part is identified in the supplied source material as obsolete, and one distributor listing describes it as a pre-qualification sample. Its K30 architecture therefore requires lifecycle attention during design selection: existing supported designs should confirm sourcing and qualification, while new designs should avoid committing to an obsolete MCU unless long-term availability is independently secured. The 144-MAPBGA package also demands BGA assembly capability, careful escape-routing planning, and adequate thermal design. Typical implementation places the MCU between sensors, communication transceivers, display peripherals, actuators, and external memory. Firmware must configure clocks and peripherals, while the board must provide regulated supply rails, decoupling, reset handling, clock stability, and programming/debug access. The supplied sources do not provide a complete verified pinout, electrical limits, or a full set of operating ranges. For a new board, do not infer pin compatibility from the 144-BGA package name alone. Compare every ball assignment, power domain, peripheral mapping, voltage limit, and software device configuration against the manufacturer documentation. The listed alternative comparison results identify functionally related devices but do not establish true pin-to-pin drop-in replacements. This page consolidates distributor specifications, lifecycle indications, interface details, package information, and engineering cautions into a design-oriented reference for the PK30N512VMD100. It is intended to support sourcing, legacy maintenance, and feasibility review without inventing electrical values absent from the verified data.

RFQ צור קשר

PK30X256VLQ100

PK30X256VLQ100 - 100MHz Cortex-M4 MCU 256KB Flash | NXP Kinetis

The NXP (formerly Freescale) PK30X256VLQ100 is an ARM Cortex-M4 Kinetis K30 family 32-bit microcontroller running at 100 MHz with 256 KB of embedded Flash program memory, packaged in a 144-pin LQFP (20 mm x 20 mm). According to the NXP Kinetis K30 datasheet, the device integrates 256 KB of Flash, 64 KB of SRAM, an LCD segment driver controller, USB 2.0 Full-Speed with on-chip PHY, CAN, I2C, SPI, UART, ADC, and 102 general-purpose I/O pins suitable for human-machine interface and industrial control panels. What is an ARM Cortex-M4 microcontroller? A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (RAM), and peripherals such as timers, communication interfaces, and analog blocks. The ARM Cortex-M4 core is a 32-bit processor implementing the Thumb-2 instruction set, with hardware single-precision floating-point and DSP extensions. The Cortex-M4 architecture sits in the taxonomy: microcontroller -> embedded MCU -> ARM Cortex-M family -> Cortex-M4 core -> semiconductor. The Kinetis K30 sub-family is optimized for low-power, segment-LCD display applications. Key features include a Cortex-M4 core with FPU and DSP instructions, 256 KB Flash, 64 KB SRAM, an integrated segment LCD controller (up to 8x40 segments per the K30 family specification), USB 2.0 Full-Speed with on-chip transceiver, CAN 2.0B interface, multiple low-power modes, and an internal oscillator. The 144-LQFP package exposes the full set of K30 peripheral pins including the external bus interface for expanded memory or graphics. The PK30X256VLQ100 is qualified to AEC-Q100 Grade 1 automotive standards and operates across the industrial temperature range, supporting voltage rails from 1.71 V to 3.6 V. The wide voltage range allows direct connection to single-cell Li-ion (3.0-3.6 V) or regulated 1.8 V/3.3 V system rails without level translation, simplifying BOM. Typical applications include automotive instrument clusters with segment-LCD, industrial HMI panels, smart metering (electricity/gas/water), medical infusion pumps with LCD readout, point-of-sale terminals, and home appliance control boards. The on-chip LCD driver eliminates the need for an external LCD bias generator, reducing BOM cost in display-equipped products. When designing with this device, ensure adequate decoupling (100 nF + 4.7 uF per VDD pair) and follow NXP's recommended SDcard/USB layout guidelines for the USB Full-Speed data lines to meet radiated-emission compliance. Pre-qualification samples are shipped under the "PK30" prefix; production parts use the "MK30" prefix. This page synthesizes distributor stock, drop-in NXP K30 family alternatives, and practical layout notes not duplicated in the manufacturer datasheet.

RFQ צור קשר

PK40N512VMD100

PK40N512VMD100 - 32-bit 100 MHz MCU with 512 KB Flash | NXP

The NXP Semiconductors PK40N512VMD100 is a 32-bit ARM Cortex-M4 Kinetis K40 microcontroller rated up to 100 MHz, with 512 KB of Flash memory, 128 KB of RAM, and 98 I/O pins in a 144-pin MAPBGA package measuring 13 mm by 13 mm. Its operating voltage is reported as 1.8 V, 2.5 V, or 3.3 V, while one source specifies a 1.71 V to 3.6 V operating range. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The PK40N512VMD100 belongs to the ARM Cortex-M4 microcontroller class, within the broader embedded-processor and semiconductor hierarchy. It is intended for embedded control systems that require deterministic real-time execution, substantial local program storage, and multiple peripheral connections. The device provides 512 KB of Flash organized as 512K by 8 bits and 128K by 8 bits of RAM. Its ARM Cortex-M4 processor operates at up to 100 MHz, allowing software to execute control logic, communications, data acquisition, and user-interface tasks in one integrated device. The 98 available I/O positions support external sensors, actuators, communications interfaces, display connections, and other system resources. The PK40N512VMD100 is identified as a Kinetis K40 MCU with USB and LCD capability in distributor listings. It also offers multiple voltage options and an internal oscillator. Because this is a complex 144-ball device, designers should validate the exact pin functions, electrical limits, memory features, and peripheral availability against the official NXP or Freescale documentation before committing a PCB layout. Typical applications include industrial automation, embedded control, medical-device monitoring, automotive electronics, USB-connected equipment, and systems requiring a low-power microcontroller with local Flash storage. Its 100 MHz Cortex-M4 core and 512 KB Flash provide a useful balance of processing capacity and memory for moderately complex embedded products. The most important design consideration is package and pinout validation. The 144-MAPBGA footprint requires a multilayer PCB with fine-pitch escape routing and careful ball assignment; a wrong footprint cannot be corrected by simple rework. Confirm the exact ordering code, voltage option, temperature grade, and exposed-ball requirements against the manufacturer datasheet before production release. This page combines distributor specifications, sourcing information, and practical selection guidance for the PK40N512VMD100. It does not invent pin assignments, current ratings, or operating limits that were not present in the verified source material.

RFQ צור קשר

PK64FN1M0VLQ12

PK64FN1M0VLQ12 - 120MHz Cortex-M4 MCU, 1MB Flash | NXP

The NXP PK64FN1M0VLQ12 is a 120 MHz ARM Cortex-M4 microcontroller with FPU, 1 MB of Flash and 256 KB of SRAM, supplied in a 144-pin LQFP (20x20 mm) package. According to NXP, this device sits inside the Kinetis K64 sub-family and provides IEEE 1588 Ethernet, USB with on-chip HS PHY, security modules, and a rich peripheral set for industrial connectivity. Pricing as of 2026-10-09: $9.24 at qty 1, dropping to $7.45 at 100 pieces and $6.62 at 1000. What is a Kinetis K-series MCU? A Kinetis MCU is a 32-bit ARM Cortex-M microcontroller family from NXP designed for connected, mixed-signal embedded applications. The PK64 sits in the K64 sub-family, which scales the Cortex-M4 core with FPU up to 120 MHz and adds Ethernet, USB, and crypto/security peripherals. In the broader taxonomy it belongs to: MCU -> ARM Cortex-M4 -> Kinetis K-series -> connected/industrial MCU category. Key features of the PK64FN1M0VLQ12 include an ARM Cortex-M4 core with single-precision FPU, 120 MHz CPU clock, 1 MB program Flash, 256 KB SRAM, full-speed and high-speed USB 2.0 On-The-Go with on-chip HS PHY, 10/100 Ethernet MAC with IEEE 1588 support, hardware encryption (AES, DES, SHA) and tamper detection, 12-bit ADC and DAC, FlexTimers, low-power run/wait/standby modes, and a wide operating voltage range from 1.71 V to 3.6 V. The 144-pin LQFP provides ample I/O for industrial bus and motor-control applications. From an architectural standpoint, the PK64 integrates a bus matrix that allows simultaneous DMA-driven access to SRAM, Ethernet and USB peripherals without CPU stalls. The Cortex-M4 FPU accelerates DSP and floating-point control loops, which is critical for power conversion and motor control. The integrated high-speed USB PHY and Ethernet MAC reduce BOM cost and PCB area versus discrete implementations. Hardware crypto blocks offload AES/SHA from software, leaving the core free for application logic. Typical applications include industrial Ethernet gateways, PLC and fieldbus nodes, factory automation controllers, motor drives and inverters, building automation (BACnet/Modbus), and POS or networked print devices. The 144-pin LQFP footprint supports designs that need many I/O lines for parallel buses, multi-axis motor control, or color displays. For engineers choosing between the PK and MK prefixes of the same silicon, the PK prefix denotes a pre-production part while MK denotes production volume; both share the same K64 die. A key design consideration is to plan clock and supply decoupling for the dual-mode USB PHY, place the 50-ohm Ethernet differential pair with controlled impedance, and ensure firmware is configured for either 25 MHz or 50 MHz external crystal modes supported by the K64. Flash security and tamper pins should be bonded correctly if the cryptographic accelerator is used. This page synthesizes NXP distributor pricing, K64 family drop-in alternatives, application reference designs, and PCB design notes not present in a single datasheet view.

RFQ צור קשר

PKE18F512VLL16

PKE18F512VLL16 - Kinetis KE18F 168MHz Cortex-M4F MCU | NXP

The NXP PKE18F512VLL16 is a Kinetis KE18F series 32-bit Arm Cortex-M4F microcontroller running up to 168 MHz, packaged in a 100-pin LQFP (14x14 mm). It integrates 512 KB of Flash, 64 KB of FlexMem, and 64 KB of SRAM, providing high-density on-chip memory for 5V-tolerant industrial and automotive body applications. The part is built on a robust 5V process that supports 2.7V to 5.5V supply operation, with dual CAN 2.0B FlexCAN interfaces and a rich mix of analog and digital peripherals. A Kinetis KE1xF MCU is the high-end tier of the broader Kinetis E family, where Kinetis E (industrial/automotive 5V Cortex-M0+) -> Kinetis KE1xF (Cortex-M4F 5V high-performance) -> Cortex-M4F (Arm core) -> ARM Cortex-M family (32-bit microcontrollers) -> MCU (Microcontroller Unit) -> Embedded System. The KE18F is engineered for harsh 5V environments (industrial control, HVAC, smart metering, white goods, automotive body) where 3.3V-native MCUs fail due to EMC or transient immunity. Compared to legacy 8-bit 8051 / 16-bit HC(S)08 / 32-bit ColdFire designs, the KE18F delivers an order-of-magnitude performance jump while keeping the same 5V I/O tolerance. Key features include a single-precision FPU, DSP instructions, 32 KB FlexNVM with EEPROM capability, DMA, ADC (12-bit, fast conversion), FlexTimers, periodic interrupt timers, a real-time clock, and on-chip EEPROM emulation. Two CAN 2.0B channels, multiple UARTs, SPIs, I2Cs, and an integrated 5V regulator simplify multi-rail designs. Typical applications include industrial motor control (BLDC/PMSM FOC), HVAC control boards, smart electricity meters, white goods, body control modules, and battery management systems for low-voltage storage. The 100-LQFP footprint allows 4-layer FR4 layout with no exotic stackup. When designing with KE18F, plan a 100-LQFP layout with adequate thermal relief and route the VBAT pin directly to the backup battery. Use the FlexMemory partition command to allocate FlexNVM as EEPROM before final code lock. This page synthesizes distributor pricing, drop-in NXP same-family alternatives, and practical layout notes not collated in the official NXP datasheet.

RFQ צור קשר

PL2303GC

PL2303GC - USB to UART Bridge Controller, SSOP-28 | Prolific

The Prolific PL2303GC is a low-cost, high-performance USB-to-Serial Bridge Controller that provides a convenient small-footprint solution for connecting an RS232-like full-duplex asynchronous serial device to any USB host. Housed in a 28-pin SSOP package, the device integrates a USB 2.0 Full-Speed transceiver, a full UART engine, GPIO pins, and battery-charging detection logic compliant with USB BC1.2. It supports data rates up to 12 Mbps over USB and offers a wide range of baud-rate settings on the UART side, making it suitable for industrial connectivity, embedded debug consoles, point-of-sale terminals, and legacy RS232 migration. A USB-to-UART bridge controller is a category of interface IC that converts USB signaling on the host side into traditional asynchronous serial (UART) signaling on the device side. The hierarchy is USB-to-Serial bridge -> UART controller -> asynchronous serial interface -> Interface IC -> Integrated Circuit. These bridges allow designers to add USB connectivity to existing UART-based microcontrollers, sensors, and modules without rewriting firmware, by emulating a legacy COM port through a virtual-COM-port driver on the host. Key features of the PL2303GC include integrated USB 2.0 Full-Speed (12 Mbps) PHY, a configurable UART supporting 5/6/7/8 data bits and 1/1.5/2 stop bits, hardware and software flow control (XON/XOFF, RTS/CTS, DTR/DSR), multiple GPIO pins for status or control signaling, and support for USB Battery Charging Specification 1.2 (BC1.2). The device operates from a single 3.3 V supply, draws low suspend current, and integrates an internal clock multiplier so no external crystal is required, reducing BOM cost. Architecturally, the PL2303GC combines a USB Serial Interface Engine (SIE), a 48 MHz internal PLL, an asynchronous serial engine with 256-byte FIFOs in each direction, and the BC1.2 charger-detection state machine. The high FIFO depth prevents UART underrun at high baud rates and decouples the host polling interval from the device-side data rate. Typical applications include USB-to-RS232 debug cables for embedded development, industrial control boards replacing legacy COM ports, USB barcode scanners, GPS modules, point-of-sale terminals, and any system needing legacy serial connectivity from a modern USB-only host. The on-chip GPIO and BC1.2 detection also suit charging-cable applications where the upstream port must signal charging current to a downstream device. When designing with the PL2303GC, note that it is pin-to-pin compatible with the legacy PL2303HXD and PL2303TA in SSOP-28, but the external BOM differs - the new part requires fewer passives. Plan for the migration schematic referenced in the Prolific application note PL2303GC-SSOP28_Migration-Guide. This page synthesizes distributor pricing, pin-compatible drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ צור קשר

תת-קטגוריות

מוצרים (38,000+)

PIC32MZ2064DAK176T-V/2J - 200MHz Graphics MCU 2MB Flash | Microchip

PIC32MZ2064DAL169-I/HF - 200MHz 32-bit MCU 2MB Flash LFBGA-169 | Microchip

PIC32MZ2064DAL176-I/2J - 200MHz 32-bit MCU 2MB Flash | Microchip

PIC32MZ2064DAL176-V/2J - 200MHz 32-Bit Graphics MCU | Microchip

PIC32MZ2064DAL176T-V/2J - 200MHz 32-bit MCU, 2MB Flash, 176-LQFP

PIC32MZ2064DAR169-I/6J - 200MHz 32-bit Graphics MCU, 2MB Flash | Microchip

PIC32MZ2064DAR176-I/2J - 32-bit 200MHz MCU, 2MB Flash, 176-LQFP | Microchip

PIC32MZ2064DAR176-V/2J - 32-bit 200MHz MCU, 2MB Flash, LQFP-176 | Microchip

PIC32MZ2064DAR176T-V/2J - 32-Bit 200MHz MCU, 2MB Flash | Microchip

PIC32MZ2064DAS169-I/6J - 200MHz 32-bit MCU 2MB Flash 169-LFBGA | Microchip

PIC32MZ2064DAS169-V/6J - 200MHz 32-bit MCU, 2MB Flash | Microchip

PIC32MZ2064DAS169T-I/6J - 200MHz 32-bit MCU, 2MB Flash, Graphics | Microchip

PIC32MZ2064DAS169T-V/6J - 200MHz MCU, 2MB Flash, 169-LFBGA | Microchip

PIC32MZ2064DAS176-I/2J - 200MHz MCU, 2MB Flash, LQFP-176 | Microchip

PIC32MZ2064DAS176-V/2J - 200MHz MCU 2MB Flash 32MB DDR2 | Microchip

PIC32MZ2064DAS176T-I/2J - 200MHz MCU, 2MB Flash, 32MB DDR2 | Microchip

PK10FN1M0VMD12 - Kinetis K10 120MHz 1MB Flash MCU | NXP

PK20X256VMD100 - Kinetis K20 ARM Cortex-M4 MCU 256KB Flash | NXP

PK30N512VMD100 - 100MHz Cortex-M4 512KB MCU | NXP

PK30X256VLQ100 - 100MHz Cortex-M4 MCU 256KB Flash | NXP Kinetis

PK40N512VMD100 - 32-bit 100 MHz MCU with 512 KB Flash | NXP

PK64FN1M0VLQ12 - 120MHz Cortex-M4 MCU, 1MB Flash | NXP

PKE18F512VLL16 - Kinetis KE18F 168MHz Cortex-M4F MCU | NXP

PL2303GC - USB to UART Bridge Controller, SSOP-28 | Prolific