מוצרים (44,000+)

STM32F746BGT7 - 216MHz Cortex-M7 1MB MCU | STMicroelectronics
STM32F746BGT7

STM32F746BGT7 - 216MHz Cortex-M7 1MB MCU | STMicroelectronics

The STMicroelectronics STM32F746BGT7 is a high-performance 32-bit Arm Cortex-M7 microcontroller operating up to 216 MHz, with 1 MB of Flash memory and a 208-LQFP 28 mm × 28 mm package. It combines a single-precision floating-point unit, DSP instructions, memory protection, an L1 cache, SDRAM support, TFT controller capability, and the Art Accelerator for demanding embedded-control workloads. A microcontroller is a programmable system-on-chip that integrates a CPU core, Flash program memory, SRAM, peripherals, and communication interfaces into one package. The STM32F7 family belongs to the Arm Cortex-M processor hierarchy and is designed for applications requiring substantially more processing capability than typical entry-level microcontrollers. Its cache architecture and DSP support are especially useful for audio, graphics, communications, control, and real-time signal-processing systems. The STM32F746BGT7 provides 1 MB of Flash for firmware and data, while its Arm Cortex-M7 core supports single-precision floating-point instructions and a full set of DSP instructions. The 216 MHz maximum operating frequency provides additional compute headroom for control algorithms, protocol handling, and user-interface logic. The integrated Art Accelerator accelerates supported graphics operations without relying entirely on the CPU. STMicroelectronics groups the STM32F746BGT7 with the STM32F745xx and STM32F746xx devices, which are based on the same high-performance Arm Cortex-M7 architecture. The exact SRAM capacity, voltage limits, peripheral configuration, GPIO count, package dimensions beyond the verified 28 mm × 28 mm designation, and operating-temperature limits must be confirmed in the official STM32F745xx and STM32F746xx datasheet for the selected orderable suffix. Typical uses include industrial human-machine interfaces, TFT display controllers, audio processing, communications equipment, embedded graphics, and high-complexity real-time control. The Cortex-M7 DSP and floating-point capabilities make the MCU suitable for filtering, control, and signal-processing workloads that would burden a smaller microcontroller core. Designers should preserve the package pin assignments, validate clock and memory configuration against the reference manual, and verify decoupling and signal-integrity requirements in the datasheet. Software migration between STM32F7 devices must also account for differences in the T7 suffix, peripheral set, and device identification rather than assuming every orderable suffix is interchangeable. This product page consolidates verified manufacturer specifications, current distributor pricing, same-family drop-in candidates, package constraints, and practical engineering guidance. It provides additional selection context for engineers comparing the STM32F746BGT7 with other STM32F7 devices without presenting unverified electrical values as established specifications.

RFQ צור קשר
STM32F746IEK6 - 216MHz Cortex-M7 512KB Flash MCU | STMicro
STM32F746IEK6

STM32F746IEK6 - 216MHz Cortex-M7 512KB Flash MCU | STMicro

The STMicroelectronics STM32F746IEK6 is a high-performance 32-bit Arm Cortex-M7 microcontroller operating up to 216 MHz, with 512 KB (512K x 8) of on-chip Flash memory and 1.8 V / 2.5 V / 3.3 V supply options, packaged in a 176-pin UFBGA (10 x 10 mm) package. The device integrates a single-precision floating-point FPU, DSP instructions, an Art Accelerator graphics core, an L1 cache, SDRAM interface support, and TFT/LCD display capability. A microcontroller is a single integrated circuit that contains a CPU core, embedded Flash and RAM memory, and a set of dedicated peripherals such as timers, UARTs, SPI, I2C, ADC/DAC and DMA controllers. The STM32F746IEK6 belongs to the STM32F7 high-performance line, sitting above general-purpose STM32F1/F4 devices in the ST hierarchy of embedded MCU -> 32-bit Arm Cortex-M MCU -> high-performance microcontroller -> power management and connectivity ecosystem. It is aimed at industrial control, IoT endpoints, embedded automation, motor control, metering and low-power board designs. Key differentiators include the 216 MHz Cortex-M7 core with double-precision FPU capability on the F7 family, the Chrom-ART / Art Accelerator for hardware-accelerated 2D graphics and JPEG decoding, up to 512 KB of Flash for complex firmware and assets, and a rich set of high-speed interfaces including SDRAM support for external memory expansion when display framebuffers exceed internal RAM. Multiple low-power modes support battery and always-on designs, while the 176-ball UFBGA land pattern enables very compact PCB footprints for space-constrained modules. Architecturally, the Cortex-M7 core uses a Harvard-style bus matrix with an instruction cache and data cache, and ST's ART Accelerator caches frequently executed instructions in flash to reduce cycle penalties. The presence of an L1 cache and hardware accelerator is what separates the STM32F746 from earlier STM32F4 parts, making it noticeably faster on peripheral-heavy and graphics workloads while retaining the familiar STM32 ecosystem and CubeMX toolchain. Typical applications include industrial HMI panels with TFT displays, motor control and servo drive units, building and energy metering equipment, connected IoT gateways, and audio/DSP front-ends. Because the package is 10 x 10 mm UFBGA, the design must be assembled on a multilayer PCB with fine-pitch balls and X-ray inspection recommended. When designing with this part, verify the ball map and land pattern against the 176-UFBGA mechanical drawing and confirm the SDIO, SDRAM and LTDC pin assignments before committing to a layout. Also budget decoupling capacitors and a clean 3.3 V analog supply region, since the high-speed SDRAM and graphics paths are sensitive to supply ripple. This page consolidates distributor pricing as of 2026-10-30, pin-compatible drop-in alternatives from the same STM32F7 family, and practical layout and thermal guidance that is not repeated in the manufacturer datasheet, giving procurement and design teams one reference for the STM32F746IEK6.

RFQ צור קשר
STM32F746IET6 - 216MHz Cortex-M7 512KB MCU | ST
STM32F746IET6

STM32F746IET6 - 216MHz Cortex-M7 512KB MCU | ST

The STMicroelectronics STM32F746IET6 is a 32-bit ARM Cortex-M7 microcontroller operating up to 216 MHz, with 512 KB of Flash memory and 320 KB of RAM, housed in a 176-LQFP package. It is designed for high-performance embedded applications that require substantial processing performance, graphics support, SDRAM interfacing, and a broad set of serial and parallel peripherals. The STM32F746IET6 belongs to the STM32F7 high-performance microcontroller family and combines a Cortex-M7 processor with DSP and floating-point capabilities. A microcontroller is a compact semiconductor system that integrates a processor core, memory, peripherals, and communication interfaces into one device. In the STM32F7 family hierarchy, this part sits between general-purpose embedded control and higher-performance signal-processing systems. Its ARM Cortex-M7 architecture supports demanding control loops, human-machine interfaces, communications gateways, and multimedia front ends while retaining the software ecosystem and development approach associated with STM32 devices. Verified distributor data identifies a maximum CPU frequency of 216 MHz, 512 KB of Flash organized as 512K x 8, 320 KB of RAM, and 140 I/O. The part is offered in a 176-LQFP 24 x 24 mm package. Other verified listings identify high-performance DSP with FPU, L1 cache, SDRAM, TFT, and Art Accelerator features. These characteristics make the device relevant to TFT display systems, industrial HMI controllers, imaging equipment, connected industrial equipment, and embedded audio or communications platforms. The STM32F7 architecture provides a suitable balance between processing throughput and peripheral integration. Its 176-pin LQFP package exposes a broad interface set for external memory, displays, communications, control signals, and analog functions. The exact peripheral assignments, electrical limits, memory alternatives, and configuration details must be confirmed against the STMicroelectronics datasheet before schematic capture or firmware deployment. Typical application areas include TFT and LCD human-machine interfaces, SDRAM-based image or communications systems, industrial automation controllers, networking equipment, audio processing, and general-purpose high-performance embedded control. The 216 MHz Cortex-M7 core and 512 KB Flash capacity provide meaningful headroom for protocol stacks, graphics acceleration, and real-time control tasks. A key design consideration is package and memory planning. Because the STM32F746IET6 uses a 176-LQFP footprint, PCB layout, thermal behavior, and signal routing require careful validation. Designers should also verify external-memory topology, display interface requirements, peripheral assignments, and the complete STMicroelectronics pinout before committing the design to manufacturing. This page consolidates verified distributor specifications, source links, package information, and practical engineering guidance for engineers evaluating the STM32F746IET6. It does not replace the manufacturer datasheet; missing electrical and peripheral details are marked for data collection rather than guessed.

RFQ צור קשר
STM32F746IGK6 - 216MHz Cortex-M7 MCU | STMicroelectronics
STM32F746IGK6

STM32F746IGK6 - 216MHz Cortex-M7 MCU | STMicroelectronics

The STMicroelectronics STM32F746IGK6 is a high-performance 32-bit Arm Cortex-M7 microcontroller operating up to 216 MHz, with 1 MB of flash memory and 176-pin-plus-25-ball UFBGA packaging in a 10 mm x 10 mm footprint. The verified distributor listing identifies the device as an STM32F7-series MCU with 1 MB flash, while the STMicroelectronics family page confirms that STM32F745xx and STM32F746xx devices use the Cortex-M7 core with up to 216 MHz operation. A microcontroller is a programmable embedded-system component that integrates a processor core, memory, and peripherals into one semiconductor package. The STM32F7 family belongs to the Arm Cortex-M microcontroller hierarchy, combining real-time control capability with digital signal processing, connectivity, and memory-management functions. The STM32F746IGK6 is intended for designs requiring substantial embedded processing performance in a compact, high-pin-count package. The key verified features are a 32-bit Arm Cortex-M7 core, up to 216 MHz operating frequency, and 1 MB of flash organized as 1M x 8. The Cortex-M7 platform supports floating-point and DSP-oriented embedded workloads, while the large flash capacity provides room for application code, firmware libraries, and data-storage requirements. The 176+25 UFBGA package exposes a high I/O count for systems requiring multiple communication, control, and debug connections. The STM32F746IGK6 is suitable for industrial control, communications equipment, audio and signal-processing systems, motor-control platforms, and connected embedded products. Its high-frequency Cortex-M7 core can support real-time control loops and complex peripheral coordination, while the compact 10 x 10 mm package supports space-constrained board layouts. Compared with lower-performance microcontrollers, the device offers greater processing headroom, although high-speed design work still requires careful power, signal-integrity, and thermal validation. Engineers should verify the complete pin assignment, exposed-ball function, power requirements, clock configuration, decoupling, and PCB land pattern against the official STM32F745xx/STM32F746xx datasheet before layout release. Because the supplied web data does not provide the full electrical table or a verified public pin map, individual voltage, current, memory, temperature, and compliance values are marked as needed rather than guessed. This page combines the verified manufacturer identity, distributor specifications, package information, pricing reference, replacement screening, and application guidance. It is intended to accelerate initial component selection while preserving the distinction between confirmed data and parameters that must be checked in the manufacturer datasheet before production release.

RFQ צור קשר
STM32F746IGK7 - 216MHz Cortex-M7 MCU | STMicroelectronics
STM32F746IGK7

STM32F746IGK7 - 216MHz Cortex-M7 MCU | STMicroelectronics

The STMicroelectronics STM32F746IGK7 is a high-performance 32-bit Arm Cortex-M7 microcontroller with a maximum CPU frequency of 216 MHz, 1 MB of flash memory, and a 176+25 UFBGA (10x10) package. The device combines a high-performance RISC core with DSP and floating-point capabilities for demanding embedded-control, communications, and user-interface applications. A microcontroller is a programmable semiconductor system that integrates a CPU, memory, peripherals, and communication interfaces onto one device. The STM32F7 family sits within the hierarchy of microcontrollers, embedded processors, and semiconductor components. Compared with a general-purpose processor, an STM32 MCU provides deterministic peripheral control, embedded flash and RAM, low-power operating modes, and a compact package suitable for industrial and consumer equipment. Key verified features include a 32-bit Arm Cortex-M7 core operating at up to 216 MHz, 1 MB of program flash, single-core operation, and an L1 cache. Additional listed capabilities include DSP, FPU, SDRAM, TFT, and hardware acceleration for suitable graphics and signal-processing workloads. These features allow the MCU to manage real-time control loops while also executing protocol, display, and data-processing tasks. The STM32F746IGK7 belongs to the STM32F746IG family, whose Cortex-M7 architecture combines a high-clock-rate core with extensive serial and display-oriented peripherals. The exact RAM size, voltage range, peripheral list, GPIO count, operating-temperature limits, and package dimensions are not included in the supplied verified records and therefore should be confirmed in the official STM32F746IG documentation before design release. Typical uses include industrial automation equipment, TFT-based human-machine interfaces, connected industrial controllers, audio and communications equipment, and embedded systems requiring 1 MB of local flash. The compact 10x10 mm UFBGA package is useful for space-constrained designs, but its fine pitch and exposed-pad construction require careful PCB layout, stencil design, reflow-profile control, and inspection during manufacturing. The primary design consideration is PCB implementation. Because this is a fine-pitch ball-grid-array package with 176 device balls plus 25 additional balls, power, ground, decoupling, and high-speed signals must be routed according to the manufacturer's package and board-layout guidance. Use the official STM32CubeMX configuration tools and ST programming tools only after confirming the selected board, clock tree, memory configuration, and peripheral pin assignments. This page consolidates verified distributor specifications, current pricing information, family-level replacement context, and practical BGA implementation guidance. It also distinguishes confirmed STM32F746IGK7 data from parameters that still require datasheet review, supporting faster procurement and engineering evaluation without presenting unsupported specifications as facts.

RFQ צור קשר
STM32F746IGT6 - Cortex-M7 MCU 1MB Flash 216MHz LQFP-176
STM32F746IGT6

STM32F746IGT6 - Cortex-M7 MCU 1MB Flash 216MHz LQFP-176

The STMicroelectronics STM32F746IGT6 is a high-performance ARM Cortex-M7 32-bit RISC microcontroller operating at up to 216 MHz with 1 MB of Flash and 340 KB of SRAM, housed in a 176-pin LQFP (24x24 mm) industrial-grade package. The device integrates a double-precision FPU, L1 cache (16 KB I-cache + 16 KB D-cache), an ART Accelerator for zero-wait-state execution from Flash, and a Chrom-ART graphics engine for TFT and JPEG codec acceleration. A microcontroller (MCU) is a single-chip computer containing a CPU core, memory, peripherals, and I/O. The Cortex-M7 family is an ARM architecture targeting deterministic embedded systems with DSP and SIMD extensions and an optional hardware floating-point unit. The STM32F7 line in the broader STM32 taxonomy sits under 32-bit Cortex-M, then microcontrollers, then microprocessors, then semiconductors. It is a step above Cortex-M4 parts and below Cortex-M33/M85 sub-1 GHz wireless variants, sharing the same instruction set but adding dual-issue pipelines, branch prediction, and 6-stage superscalar execution. Key features include up to 216 MHz operation, 1 MB on-chip Flash, 340 KB SRAM (including 64 KB CCM SRAM accessible only by the CPU), three 12-bit ADCs at 2.4 MSPS, two 12-bit DACs, USB 2.0 OTG full-speed + high-speed with on-chip PHY, 10/100 Ethernet MAC, three CAN 2.0B controllers, an SDMMC interface, an 8- to 14-bit camera interface, and an LCD-TFT controller (up to XGA resolution). Cryptographic acceleration is provided through AES-128/192/256, Triple-DES, and hash (SHA-1/MD5) plus True Random Number Generator (TRNG) hardware. The architecture uses a Harvard bus matrix with separate I/D buses, a multi-layer AHB/AXI interconnect to give the CPU simultaneous access to Flash, SRAM, and peripherals, plus a dedicated DMA controller (two DMA controllers, each with 8 streams) for memory-to-memory/peripheral-to-memory transfers without CPU load. The TFT-LCD controller, JPEG codec, and SDMMC interface are tied to the AXI bus for high throughput, while analog peripherals sit on APB. Typical applications include HMI touch panels, industrial motor control drives, patient monitors, smart-grid energy meters, IP cameras with MJPEG streaming, barcode scanners, GNSS receivers, and consumer appliances needing TFT display + Ethernet connectivity. The 1 MB Flash is sufficient for full LVGL graphical stacks, and the Chrom-ART accelerator frees the CPU for application logic. Design considerations include mandatory 1.8V/2.5V/3.3V rail sequencing on VDD/VDDA pins, the need for a 32.768 kHz LSE crystal for RTC accuracy, and BOOT0 strap selection for Flash vs System memory bootloader boot. PCB layout requires a continuous GND plane under the LQFP and four-layer stack-up with dedicated power islands for VDDA to keep ADC SNR above 60 dBFS. This page synthesizes distributor pricing as of 2026-10-10, drop-in LQFP-176 same-package alternatives from the STM32F7 family, and practical PCB design guidance not collected in the manufacturer datasheet.

RFQ צור קשר
STM32F746IGT6E - 216MHz Cortex-M7 MCU | STMicroelectronics
STM32F746IGT6E

STM32F746IGT6E - 216MHz Cortex-M7 MCU | STMicroelectronics

The STMicroelectronics STM32F746IGT6E is a high-performance 32-bit Arm Cortex-M7 microcontroller with a 216 MHz operating frequency, 1 MB of embedded Flash memory, and a 176-pin LQFP package. It integrates an FPU, Art Accelerator, L1 cache, SDRAM support, and TFT-oriented connectivity for graphics-intensive embedded systems. A microcontroller is a programmable system-on-chip that combines a CPU core, nonvolatile program memory, volatile data memory, peripherals, and communication interfaces. The STM32F746 belongs to the STM32F7 family of high-performance microcontrollers, where the Cortex-M7 core operates within the broader hierarchy of embedded processor, real-time microcontroller, and semiconductor product categories. This hierarchy supports deterministic control alongside sophisticated graphical and communications workloads. The verified product information identifies the Cortex-M7 core, 216 MHz maximum frequency, 1 MB Flash memory, Art Accelerator, L1 cache, SDRAM capability, and TFT support as defining features. Its 176-pin LQFP package provides a substantial number of external connections compared with smaller microcontroller packages, making it appropriate for systems that need parallel display interfaces, multiple communications peripherals, external memory interfaces, and a broad pin budget. At the architectural level, the STM32F746IGT6E is intended for high-performance embedded control rather than minimal low-power sensing. The Cortex-M7 processor and FPU support demanding control loops and signal-processing workloads, while the Art Accelerator is relevant to graphical data movement. Exact RAM capacity, voltage ranges, pin assignments, and peripheral operating limits were not included in the supplied verified data and therefore require confirmation in the manufacturer documentation. Typical uses include industrial human-machine interfaces, TFT-based control panels, industrial automation controllers, communications equipment, and external SDRAM-based graphics terminals. The 216 MHz processing headroom and 176-pin connection count are useful when combining real-time control with display, networking, storage, and sensing functions. System-level qualification remains necessary because peripheral mix, clock configuration, memory organization, and software support must match the intended design. Designers should verify pin multiplexing, power architecture, decoupling, clock-tree settings, memory routing, and boot configuration against the current STMicroelectronics documentation before layout release. A 176-pin LQFP footprint also requires careful fanout and assembly planning. SWD programming is appropriate for bring-up, while production programming and secure boot should follow the selected programming and security strategy. This product page consolidates verified distributor availability, manufacturer feature information, same-package replacement candidates, pricing placeholders, and practical design guidance. Because the supplied data omits several electrical and package-specific details, the datasheet and product page remain the controlling sources for production design decisions.

RFQ צור קשר
STM32F746IGT6G - 216MHz Cortex-M7 1MB Flash MCU | STMicroelectronics
STM32F746IGT6G

STM32F746IGT6G - 216MHz Cortex-M7 1MB Flash MCU | STMicroelectronics

The STMicroelectronics STM32F746IGT6G is a high-performance 32-bit Arm Cortex-M7 microcontroller operating at up to 216 MHz, with 1 Mbyte of embedded Flash, an Art Accelerator (Chrom-ART) graphics engine and L1 cache, housed in a 176-pin LQFP (24x24 mm) package. A microcontroller is a single integrated circuit that combines a processor core, non-volatile program memory, volatile data memory and a set of dedicated peripherals on one die. In the STMicroelectronics product hierarchy, the STM32F7 series sits above the STM32F4 mainstream line and delivers Cortex-M7 class compute with hardware graphics and LCD capability, targeting industrial HMI, data acquisition and embedded control systems that need more performance and display integration than a typical Cortex-M4 device provides. Key features of the STM32F746IGT6G include a 216 MHz maximum CPU frequency with the Art Accelerator boosting execution from external memory, a 1 Mbyte Flash and 1 Mbyte RAM option, up to 2 Mbyte of external SDRAM support through the FMC, an integrated TFT LCD controller, and a rich set of communication peripherals including Ethernet MAC with MII/RMII, USB OTG HS/FS, camera interface, and USART/UART/I2C/SPI blocks. Cryptographic acceleration and a true random number generator support secure connectivity. Architecturally the device uses the Arm Cortex-M7 core with a superscalar pipeline, an ART Accelerator instruction prefetch path, and a 16 KB data cache plus 16 KB instruction cache, which together allow sustained code execution from external SDRAM at close to core speed. The FMC and LTDC blocks handle the high-bandwidth data path required for parallel TFT panels, while the DCMI and JPEG hardware accelerate image capture and decompression for camera-based designs. Typical applications include industrial human-machine interface panels, building automation controllers, medical and laboratory instrumentation, machine vision modules, audio and voice-processing control boards, and connected sensor gateways that must run a graphical user interface alongside real-time control loops. When laying out a board around this device, treat the LQFP-176 footprint as a demanding fine-pitch design: keep the 1.8-2.0 V core and 3.3 V I/O decoupling networks extremely close to the supply pins, and confirm the regulator start-up sequencing and the FMC signal integrity on the external SDRAM bus before layout is frozen. This page consolidates distributor pricing, verified package and pinout references, same-footprint drop-in alternatives and practical layout guidance that are not consolidated in the manufacturer datasheet itself.

RFQ צור קשר
STM32F746IGT7 - 216MHz Cortex-M7 1MB MCU | STMicroelectronics
STM32F746IGT7

STM32F746IGT7 - 216MHz Cortex-M7 1MB MCU | STMicroelectronics

The STMicroelectronics STM32F746IGT7 is a 32-bit ARM Cortex-M7 microcontroller operating up to 216 MHz, with 1 MB of flash memory and a 176-LQFP package measuring 24 x 24 mm. It combines single-precision floating-point and DSP instruction support with extensive embedded peripherals for demanding control and signal-processing systems. An Arm Cortex-M7 microcontroller is a high-performance member of the embedded MCU hierarchy: Cortex-M7 core → 32-bit RISC microcontroller → embedded processor → semiconductor. This device type executes control software close to sensors, actuators, communications circuitry, and human-machine interfaces, reducing dependence on separate processors for real-time workloads. Verified headline features include the 216 MHz Cortex-M7 core, 1 MB flash organized as 1M x 8 bits, and single-precision floating-point capability. The Cortex-M7 architecture also implements DSP instructions and memory-protection features, according to the manufacturer datasheet. These capabilities suit floating-point control, audio and communications processing, graphics-assisted human-machine interfaces, and high-speed peripheral coordination. The STM32F746 belongs to STMicroelectronics’ STM32F7 high-performance microcontroller family. Its architecture provides substantially more processing capability than typical Cortex-M-class control devices while retaining the integration and deterministic embedded-control model expected from an MCU. The verified data does not provide RAM capacity, peripheral inventory, operating-voltage range, or exact package pin assignments, so those values remain unavailable rather than inferred. Typical implementation areas include industrial automation, network-connected control, audio and digital signal processing, human-machine interfaces, communications equipment, and high-performance embedded systems. Designers must confirm all peripheral assignments, electrical limits, clock requirements, and package details against the official STM32F745xx/STM32F746xx datasheet before schematic capture or PCB release. A critical design consideration is PCB planning around the 176-LQFP footprint and its fine-pitch leads. Use a manufacturer-supported footprint, verify every exposed or no-connect assignment, and preserve adequate routing and return paths for high-speed interfaces. Because the supplied source set does not establish complete pin-level data, use the official package drawing rather than reconstructing the pinout from the 176-pin count alone. This page consolidates verified manufacturer and distributor information, pricing availability from the retrieved results, source links, and engineering cautions not presented as a single concise procurement summary. It also separates confirmed facts from missing parameters so engineers can make traceable design and sourcing decisions.

RFQ צור קשר
STM32F746NEH6 - 216MHz Cortex-M7 MCU | STMicroelectronics
STM32F746NEH6

STM32F746NEH6 - 216MHz Cortex-M7 MCU | STMicroelectronics

The STMicroelectronics STM32F746NEH6 is an Arm Cortex-M7 32-bit RISC microcontroller operating at up to 216 MHz, with 512 KB of Flash memory and a 216-TFBGA (13x13) package. It combines high-performance DSP and floating-point capability with extensive connectivity and memory-management resources for demanding embedded systems. A Cortex-M7 microcontroller is an embedded processor based on the Arm Cortex-M architecture. It executes real-time control, signal-processing, communications, and human-interface tasks while integrating peripherals and memory onto one device. The STM32F746NE belongs to the STM32F7 high-performance MCU family, positioned for applications requiring more processing performance and system integration than basic microcontrollers. The verified device data identifies a 32-bit Arm Cortex-M7 core, operation up to 216 MHz, and 512 KB of Flash. The Cortex-M7 core supports single-precision floating-point data processing and DSP instructions, making the device suitable for audio, industrial control, communications, and embedded graphics workloads. Its large 216-TFBGA package also supports dense PCB layouts and high-pin-count peripheral integration. The STM32F746NEH6 is intended for designs requiring a high-performance 32-bit control platform rather than a low-cost basic MCU. Its operating frequency supports responsive control loops and computationally intensive signal processing, while the integrated Flash provides room for firmware, libraries, and application code. Exact peripheral counts, RAM size, voltage limits, and electrical timing values were not supplied in the retrieved data and should be confirmed in the manufacturer datasheet before design release. Typical uses include industrial automation, motor and motion control, audio and DSP-enabled products, networked embedded equipment, and high-resolution human-interface systems. The 216-TFBGA footprint requires careful PCB layout, power distribution, thermal analysis, and manufacturing capability. BGA assembly, inspection, and repair should be planned early in the product development cycle. For a new design, use the STM32F746NEH6 when the system benefits from its 216 MHz Cortex-M7 performance, DSP and floating-point instructions, 512 KB Flash, and dense 216-pin package. Do not substitute it solely by core frequency; verify board-level pin compatibility, memory requirements, peripherals, voltage levels, and firmware support from the official documentation.

RFQ צור קשר
STM32F746NGH6 - 32-bit ARM Cortex-M7 MCU, 1MB Flash | STMicroelectronics
STM32F746NGH6

STM32F746NGH6 - 32-bit ARM Cortex-M7 MCU, 1MB Flash | STMicroelectronics

The STM32F746NGH6 is a high-performance 32-bit microcontroller from STMicroelectronics based on the ARM Cortex-M7 core, operating at up to 216 MHz. It integrates 1 MB of Flash memory and 320 KB of SRAM, along with a rich set of peripherals including TFT-LCD controller, JPEG codec, Ethernet MAC, camera interface, and multiple communication interfaces. The device is housed in a 216-ball TFBGA package (H6 suffix) with a 13x13 mm footprint, offering a compact solution for advanced embedded applications. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory (Flash and SRAM), and programmable input/output peripherals on a single chip. Microcontrollers are the backbone of modern electronics, found in automotive systems, industrial controls, consumer electronics, and IoT devices. The STM32F746NGH6 belongs to the STM32F7 series, which is part of the broader STM32 family of 32-bit ARM Cortex-M based MCUs, positioned as a high-performance option within the STM32 portfolio. Key features of the STM32F746NGH6 include a 216 MHz ARM Cortex-M7 core with double-precision FPU and DSP instructions, 1 MB of Flash memory, 320 KB of SRAM, and a Chrom-ART Accelerator for advanced graphics. It supports a wide range of communication interfaces: 4x USART, 4x UART, 6x SPI, 4x I2C, 2x CAN, 1x SDMMC, 1x USB 2.0 OTG HS/FS, 1x Ethernet MAC, and 1x camera interface. The device also features a TFT-LCD controller supporting up to XGA resolution, a JPEG codec, and a true random number generator (TRNG). Technically, the STM32F746NGH6 is built on a 40nm process technology, enabling high clock speeds with low power consumption. It includes a memory protection unit (MPU), a cache (I-Cache and D-Cache) to optimize performance, and a power management unit with multiple low-power modes. The device supports a supply voltage range of 1.7V to 3.6V and operates over a temperature range of -40°C to +85°C (H6 suffix indicates industrial temperature grade). Typical applications include high-end consumer electronics, industrial automation, motor control, medical devices, and IoT gateways. The combination of high processing power, rich connectivity, and advanced graphics capabilities makes it ideal for human-machine interfaces (HMI), audio processing, and real-time control systems. When designing with this MCU, ensure proper decoupling of the power supply pins and follow the layout guidelines in the datasheet for the TFBGA package. The device requires a 25 MHz crystal for the HSE oscillator and supports an internal 16 MHz HSI oscillator for cost-sensitive designs.

USD $18.30 צור קשר
STM32F746NGH6E - 216MHz Cortex-M7 1MB MCU | STMicroelectronics
STM32F746NGH6E

STM32F746NGH6E - 216MHz Cortex-M7 1MB MCU | STMicroelectronics

The STMicroelectronics STM32F746NGH6E is a high-performance 32-bit Arm Cortex-M7 microcontroller rated up to 216 MHz, with 1 MB of embedded flash memory, supplied in a 216-ball TFBGA package. It belongs to the STM32F746 device family and is positioned for demanding embedded applications that require substantial processing performance, integrated connectivity, and extensive peripheral support. A microcontroller is a programmable semiconductor device that integrates a processor core, memory, and peripherals into one component. The STM32F746 product hierarchy extends from the STM32F7 family to the STM32F746 device, the Arm Cortex-M7 core, and the broader category of embedded-system controllers. The Cortex-M7 architecture provides a 32-bit RISC platform for real-time control, while the STM32F746NGH6E combines that processing capability with 1 MB of on-chip flash for firmware storage. The principal verified specifications are a maximum operating frequency of 216 MHz, 1 MB of flash memory, 32-bit Arm Cortex-M7 architecture, and a 216-TFBGA package. The E suffix distinguishes this ordering code from STM32F746NGH6, but the supplied excerpts do not provide a verified explanation of all grade, temperature, or qualification differences. Consequently, engineers should consult the manufacturer ordering-information section before treating the two order codes as interchangeable production alternatives. The 216 MHz Cortex-M7 core is suitable for work involving multiple concurrent control tasks, communications, data acquisition, and graphical or industrial user interfaces. Its integrated-peripheral ecosystem can reduce the need for separate interface devices when the selected board design uses the appropriate STM32F7 ecosystem components. Designers must still verify peripheral availability, pin multiplexing, memory requirements, and electrical constraints for their exact design. Typical applications include industrial automation controllers, human-machine interfaces, networked embedded equipment, audio and multimedia control, and connected sensors. An HMI can use the Cortex-M7 performance to manage display updates and input handling, while an industrial controller can divide time among acquisition, communication, and real-time control tasks. Ethernet-capable communications designs may also pair this MCU with a dedicated physical-layer transceiver. The principal design consideration is the 216-TFBGA package. Its fine-pitch ball layout requires capable PCB assembly and inspection processes, careful escape routing, and adequate thermal design. The provided sources do not expose the complete 216-ball pinout, so the pin assignment must be verified directly in the manufacturer documentation before schematic capture or PCB layout. This product page consolidates verified distributor listings, the manufacturer family page, package identity, procurement links, and explicitly identified data gaps. It also distinguishes verified drop-in evidence from broader MCU alternatives that require firmware, electrical, and package validation before substitution.

RFQ צור קשר
STM32F746NGH6G - 216MHz Cortex-M7 1MB MCU | STMicroelectronics
STM32F746NGH6G

STM32F746NGH6G - 216MHz Cortex-M7 1MB MCU | STMicroelectronics

The STMicroelectronics STM32F746NGH6G is a high-performance 32-bit microcontroller featuring a 216 MHz Arm Cortex-M7 processor, 1 MB of Flash memory, a single-precision floating-point unit, and a 216-pin TFBGA package measuring 13 x 13 mm. It combines dedicated DSP instructions, an Art Accelerator, L1 cache, SDRAM capability, and TFT controller support for demanding embedded control, display, audio, and communications designs. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and interface circuitry into one device. The STM32F7 family belongs to the embedded microcontroller hierarchy and combines real-time control performance with extensive connectivity. The STM32F746NGH6G is positioned for applications requiring more computational throughput and graphics or display resources than general-purpose entry-level microcontrollers. The verified manufacturer information identifies the STM32F745xx and STM32F746xx devices as Cortex-M7 products operating at up to 216 MHz. Their single-precision FPU supports Arm single-precision data-processing instructions, while the built-in DSP instruction set accelerates filtering and other numerical workloads. The Art Accelerator and L1 cache improve the suitability of the device for multimedia, industrial, and human-machine-interface applications. The STM32F746NGH6G provides 1 MB of Flash memory in a 1M x 8 organization and supports SDRAM and TFT-controller functions. These resources enable larger firmware images, external-memory operation, and display-oriented designs. A 216-pin TFBGA provides substantial I/O capacity in a 13 x 13 mm surface-mount land pattern, although its fine pitch requires careful PCB layout, assembly, and inspection. Typical uses include industrial human-machine interfaces, TFT display controllers, audio and DSP processing, embedded networking, data acquisition, and high-performance control systems. The Cortex-M7 processing capability and integrated peripherals make the device suitable where deterministic embedded control must coexist with graphical data transfer or higher-bandwidth external-memory access. Designers should preserve the complete STM32F746NGH6G pin allocation and follow STMicroelectronics's recommended decoupling, clock, reset, and PCB-layout guidance. Firmware should be validated against the STM32F745xx and STM32F746xx datasheet, including operating-voltage limits and all 216 package connections. Independent validation of clock timing, power sequencing, and exposed-ball layout is essential before production release. This page combines verified manufacturer and distributor information with practical procurement guidance, a parameter comparison, and engineering-focused selection advice. It also distinguishes documented attributes from data that must still be confirmed for voltage, I/O, temperature, memory, and lifecycle-specific production decisions.

RFQ צור קשר
STM32F746NGH6TR - 32-bit ARM Cortex-M7 MCU, 1MB Flash | STMicroelectronics (Tape & Reel)
STM32F746NGH6TR

STM32F746NGH6TR - 32-bit ARM Cortex-M7 MCU, 1MB Flash | STMicroelectronics (Tape & Reel)

The STM32F746NGH6TR is a high-performance 32-bit microcontroller from STMicroelectronics based on the ARM Cortex-M7 core, operating at up to 216 MHz. It integrates 1 MB of Flash memory and 320 KB of SRAM, along with a rich set of peripherals including TFT-LCD controller, JPEG codec, Ethernet MAC, camera interface, and multiple communication interfaces. The device is housed in a 216-ball TFBGA package (H6 suffix) with a 13x13 mm footprint, offering a compact solution for advanced embedded applications. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory (Flash and SRAM), and programmable input/output peripherals on a single chip. Microcontrollers are the backbone of modern electronics, found in automotive systems, industrial controls, consumer electronics, and IoT devices. The STM32F746NGH6TR belongs to the STM32F7 series, which is part of the broader STM32 family of 32-bit ARM Cortex-M based MCUs, positioned as a high-performance option within the STM32 portfolio. Key features of the STM32F746NGH6TR include a 216 MHz ARM Cortex-M7 core with double-precision FPU and DSP instructions, 1 MB of Flash memory, 320 KB of SRAM, and a Chrom-ART Accelerator for advanced graphics. It supports a wide range of communication interfaces: 4x USART, 4x UART, 6x SPI, 4x I2C, 2x CAN, 1x SDMMC, 1x USB 2.0 OTG HS/FS, 1x Ethernet MAC, and 1x camera interface. The device also features a TFT-LCD controller supporting up to XGA resolution, a JPEG codec, and a true random number generator (TRNG). Technically, the STM32F746NGH6TR is built on a 40nm process technology, enabling high clock speeds with low power consumption. It includes a memory protection unit (MPU), a cache (I-Cache and D-Cache) to optimize performance, and a power management unit with multiple low-power modes. The device supports a supply voltage range of 1.7V to 3.6V and operates over a temperature range of -40°C to +85°C (H6 suffix indicates industrial temperature grade). Typical applications include high-end consumer electronics, industrial automation, motor control, medical devices, and IoT gateways. The combination of high processing power, rich connectivity, and advanced graphics capabilities makes it ideal for human-machine interfaces (HMI), audio processing, and real-time control systems. When designing with this MCU, ensure proper decoupling of the power supply pins and follow the layout guidelines in the datasheet for the TFBGA package. The device requires a 25 MHz crystal for the HSE oscillator and supports an internal 16 MHz HSI oscillator for cost-sensitive designs.

USD $18.30 צור קשר
STM32F746NGH7 - 216MHz Cortex-M7 1MB MCU | STMicroelectronics
STM32F746NGH7

STM32F746NGH7 - 216MHz Cortex-M7 1MB MCU | STMicroelectronics

The STMicroelectronics STM32F746NGH7 is a 32-bit Arm Cortex-M7 microcontroller operating at up to 216 MHz, with 1 MB of Flash memory and a 216-TFBGA (13 x 13 mm) package. The device belongs to STMicroelectronics' STM32F7 high-performance microcontroller family and combines a single-precision floating-point unit with DSP instructions, cache, SDRAM support, TFT controller capability, and extensive connectivity for demanding embedded systems. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, peripherals, and communication interfaces into one compact component. The STM32F7 family hierarchy is Arm Cortex-M7 microcontroller, 32-bit RISC MCU, embedded processor, and semiconductor. Its high-performance architecture is intended for industrial controls, human-machine interfaces, communications equipment, audio processing, graphics-assisted systems, and connected products requiring more computation than entry-level Cortex-M devices. Key verified attributes include a maximum operating frequency of 216 MHz, 1 MB (1M x 8) Flash memory, and a 216-TFBGA package measuring 13 x 13 mm. The Cortex-M7 core includes a single-precision floating-point unit supporting Arm single-precision data-processing instructions and data types. It also implements DSP instructions and memory-protection capabilities, making it suitable for real-time control, signal processing, and industrial applications. The STM32F746xx family is designed around the Arm Cortex-M7 core and includes high-performance application features identified in the manufacturer documentation, including cache, SDRAM, TFT, and the Chrom-ART accelerator. These characteristics make the STM32F746NGH7 useful in TFT-based human-machine interfaces, communications gateways, industrial automation controllers, and embedded systems that combine control processing with graphical or signal-processing workloads. The 216-TFBGA package supports dense PCB integration but requires careful escape routing and careful supply distribution. The small 13 x 13 mm land pattern places many interconnections in a limited area, so multilayer PCB construction, solid grounding, and manufacturer-recommended footprint and via guidance are important for reliable assembly. A key purchasing consideration is that the verified distributor results show multiple sources, including DigiKey, Mouser, and LCSC. The LCSC result lists a starting price of USD 9.3381 and indicates stock; DigiKey states that the part ships today, but no unit price was exposed in the supplied result. Quantities, lead time, and lifecycle status should therefore be confirmed against the selected authorized distributor before procurement. This product page consolidates verified manufacturer and distributor information, current pricing evidence, package details, comparison parameters, and application guidance. It also distinguishes directly confirmed facts from specifications that require consultation of the complete STM32F745xx/STM32F746xx datasheet.

RFQ צור קשר
STM32F746VEH6 - 216MHz Cortex-M7 MCU | STMicroelectronics
STM32F746VEH6

STM32F746VEH6 - 216MHz Cortex-M7 MCU | STMicroelectronics

STMicroelectronics STM32F746VEH6 is a 32-bit Arm Cortex-M7 microcontroller operating at up to 216 MHz, with 512 KB of Flash memory, in a 100-TFBGA 8 x 8 mm package. It belongs to the STM32F7 high-performance microcontroller family and is designed for embedded systems requiring high processing performance, substantial program storage, and a compact surface-mount footprint. A microcontroller is an integrated circuit containing a processor core, memory, and peripherals on one semiconductor device. Within the product hierarchy, the STM32F746VEH6 is an Arm Cortex-M7 microcontroller, a 32-bit RISC embedded processor within the STM32 family and the broader microcontroller and embedded-semiconductor market. Its role is to execute firmware, process external data, and control connected peripherals in industrial, communications, consumer, and test equipment. The verified headline characteristics include an Arm Cortex-M7 core, a maximum operating frequency of 216 MHz, 512 KB of 512K x 8 Flash, 32-bit processing, and a 100-TFBGA package measuring 8 x 8 mm. The high clock rate supports computationally intensive control and signal-processing tasks, while the 512 KB Flash capacity provides room for embedded application code. The compact TFBGA package supports space-constrained designs where a larger leaded or quad-flat package would be unsuitable. STMicroelectronics positions the STM32F746xx family as a high-performance Cortex-M7 platform, with the STM32F745xx and STM32F746xx devices operating at up to 216 MHz. The STM32F746VEH6 is supplied in a package offering 100 connection positions. Detailed RAM capacity, peripheral configuration, pin functions, voltage limits, temperature range, and electrical characteristics were not present in the supplied web extracts and therefore must be confirmed in the manufacturer documentation before design release. Typical uses include industrial automation controllers, communications equipment, audio and digital signal-processing systems, graphical human-machine interfaces, and compact embedded control modules. In each case, the Cortex-M7 processing capability and 216 MHz maximum frequency provide a platform for combining real-time control with more demanding application workloads than a general-purpose low-cost microcontroller family. PCB planning should account for the 100-TFBGA geometry, fine-pitch ball assignment, via requirements, and thermal performance. The development team should verify the complete pinout, exposed-ball assignments, power rails, decoupling values, and peripheral multiplexing against the current STMicroelectronics datasheet because those details were not included in the verified search data. This page consolidates the verified distributor specifications, available same-family drop-in candidates, packaging information, and design considerations for engineers evaluating the STM32F746VEH6. It also distinguishes documented facts from parameters that remain to be obtained from the manufacturer datasheet.

RFQ צור קשר
STM32F746VET6 - 216MHz Cortex-M7 512KB MCU | STMicroelectronics
STM32F746VET6

STM32F746VET6 - 216MHz Cortex-M7 512KB MCU | STMicroelectronics

The STMicroelectronics STM32F746VET6 is a high-performance 32-bit Arm Cortex-M7 microcontroller operating up to 216 MHz, with 512 KB of embedded flash memory and a 100-pin LQFP package measuring 14 x 14 mm. It combines a single-precision floating-point unit with DSP instructions, making it suitable for real-time control, communications, industrial automation, and embedded signal-processing systems. A microcontroller is a programmable system-on-chip that integrates a CPU core, nonvolatile program memory, data memory, peripherals, and communication interfaces on one package. The STM32F746 belongs to the STM32F7 high-performance microcontroller family and combines an Arm Cortex-M7 core with embedded flash and RAM resources. Its hardware peripherals reduce the need for external logic in connected industrial, audio, networking, and control designs. Key verified specifications include a 216 MHz maximum operating frequency, 512 KB flash memory, 32-bit architecture, and a 100-LQFP package. The Cortex-M7 core supports single-precision floating-point instructions and a full set of DSP instructions, enabling efficient control loops and numerical workloads. The 100-LQFP package provides a conventional leaded footprint suitable for automated PCB assembly and inspection. The STM32F746VET6 is designed for applications that require higher processing performance than typical general-purpose Cortex-M microcontrollers while retaining a compact integrated architecture. Its DSP and floating-point capabilities are relevant to audio, motor-control, communications, and data-acquisition systems. The LQFP package also leaves generous board spacing between leads, which can simplify prototype soldering compared with fine-pitch land patterns. Typical uses include industrial controllers, motor-drive systems, communications equipment, audio interfaces, test equipment, and embedded gateways. When designing around the MCU, verify the complete pin assignment, power-supply requirements, clock configuration, memory organization, and peripheral multiplexing against the manufacturer datasheet. Software compatibility also depends on the selected STM32F7 device, package, memory size, and application firmware. The most important design trade-off is performance versus pin and package complexity. A 216 MHz Cortex-M7 core can reduce computational latency, but the design must account for decoupling, clock stability, thermal behavior, and correct peripheral configuration. STM32F746VET6 is best selected when its verified flash capacity, package, and Cortex-M7 processing requirements match the product design. This page combines verified distributor and manufacturer information, procurement data, drop-in replacement screening, and practical engineering guidance. It is intended to help engineers locate the datasheet, compare alternatives, check package compatibility, and plan an STM32F746VET6-based design without relying on unverified substitute assumptions.

RFQ צור קשר
STM32F746VET6TR - 216MHz Cortex-M7 512KB MCU | STMicroelectronics (Tape & Reel)
STM32F746VET6TR

STM32F746VET6TR - 216MHz Cortex-M7 512KB MCU | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM32F746VET6TR is a high-performance 32-bit Arm Cortex-M7 microcontroller operating up to 216 MHz, with 512 KB of embedded flash memory and a 100-pin LQFP package measuring 14 x 14 mm. It combines a single-precision floating-point unit with DSP instructions, making it suitable for real-time control, communications, industrial automation, and embedded signal-processing systems. A microcontroller is a programmable system-on-chip that integrates a CPU core, nonvolatile program memory, data memory, peripherals, and communication interfaces on one package. The STM32F746 belongs to the STM32F7 high-performance microcontroller family and combines an Arm Cortex-M7 core with embedded flash and RAM resources. Its hardware peripherals reduce the need for external logic in connected industrial, audio, networking, and control designs. Key verified specifications include a 216 MHz maximum operating frequency, 512 KB flash memory, 32-bit architecture, and a 100-LQFP package. The Cortex-M7 core supports single-precision floating-point instructions and a full set of DSP instructions, enabling efficient control loops and numerical workloads. The 100-LQFP package provides a conventional leaded footprint suitable for automated PCB assembly and inspection. The STM32F746VET6TR is designed for applications that require higher processing performance than typical general-purpose Cortex-M microcontrollers while retaining a compact integrated architecture. Its DSP and floating-point capabilities are relevant to audio, motor-control, communications, and data-acquisition systems. The LQFP package also leaves generous board spacing between leads, which can simplify prototype soldering compared with fine-pitch land patterns. Typical uses include industrial controllers, motor-drive systems, communications equipment, audio interfaces, test equipment, and embedded gateways. When designing around the MCU, verify the complete pin assignment, power-supply requirements, clock configuration, memory organization, and peripheral multiplexing against the manufacturer datasheet. Software compatibility also depends on the selected STM32F7 device, package, memory size, and application firmware. The most important design trade-off is performance versus pin and package complexity. A 216 MHz Cortex-M7 core can reduce computational latency, but the design must account for decoupling, clock stability, thermal behavior, and correct peripheral configuration. STM32F746VET6TR is best selected when its verified flash capacity, package, and Cortex-M7 processing requirements match the product design. This page combines verified distributor and manufacturer information, procurement data, drop-in replacement screening, and practical engineering guidance. It is intended to help engineers locate the datasheet, compare alternatives, check package compatibility, and plan an STM32F746VET6TR-based design without relying on unverified substitute assumptions.

RFQ צור קשר
STM32F746VGH6 - 216MHz Cortex-M7 1MB MCU | STMicroelectronics
STM32F746VGH6

STM32F746VGH6 - 216MHz Cortex-M7 1MB MCU | STMicroelectronics

STMicroelectronics STM32F746VGH6 is a high-performance 32-bit Arm Cortex-M7 microcontroller operating up to 216 MHz, with 1 MB of flash memory and a 100-ball TFBGA package measuring 8 x 8 mm. The device combines a 32-bit architecture, high-performance DSP capability, and an FPU in an embedded microcontroller designed for demanding control, communications, and signal-processing systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into a single device. In the STM32 product hierarchy, the STM32F746 belongs to the STM32F7 high-performance family of 32-bit Arm Cortex-M7 microcontrollers. These devices extend beyond basic control functions by providing larger embedded flash capacity, high clock rates, and peripherals suited to communication-intensive and real-time embedded products. The STM32F746VGH6 provides 216 MHz maximum CPU frequency, 1 MB of flash, and a 32-bit Arm Cortex-M7 processor with DSP and FPU features. Its flash capacity permits more substantial firmware, graphical data, protocol stacks, and application logic than smaller microcontrollers. The compact 8 x 8 mm TFBGA package supports space-constrained designs while exposing a high-density pin interface needed for parallel communications and extensive peripheral connectivity. The STM32F746 and STM32F745 device families are based on the high-performance Arm Cortex-M7 32-bit RISC core, according to the STMicroelectronics product page. This processing platform supports floating-point and digital signal-processing workloads while retaining the deterministic control characteristics expected from an embedded MCU. Exact RAM capacity, voltage range, peripheral configuration, and package ball assignments were not supplied in the retrieved records and should therefore be confirmed in the manufacturer datasheet before design release. Typical uses include industrial automation and factory equipment, networked embedded control, audio and digital signal processing, industrial communications, human-machine interfaces, and high-performance embedded platforms. The 1 MB flash configuration is particularly useful for firmware that combines control loops with multiple communication protocols. The 216 MHz Cortex-M7 core allows more compute-intensive filtering, control, and protocol processing to run alongside real-time peripheral operations. Designers should confirm the exact pin multiplexing, electrical limits, decoupling requirements, memory organization, and programming procedure in the STM32F746 documentation. The 100-TFBGA footprint also demands careful PCB layout with short escape routing, clean return paths, and thermal management around the exposed package features specified by STMicroelectronics. This page consolidates verified product facts, procurement information, and qualified replacement guidance into a design-oriented reference. Unlike a basic catalog listing, this resource distinguishes exact package data from unavailable technical fields, compares verified temperature-grade alternatives, and identifies where firmware, pinout, and qualification reviews remain necessary. That information helps engineers determine whether STM32F746VGH6 fits the mechanical footprint and whether a same-package variant can replace it without changing the PCB.

RFQ צור קשר
STM32F746VGT6 - 216MHz Cortex-M7 MCU, 1MB Flash | ST
STM32F746VGT6

STM32F746VGT6 - 216MHz Cortex-M7 MCU, 1MB Flash | ST

The STMicroelectronics STM32F746VGT6 is a 32-bit Arm Cortex-M7 microcontroller operating up to 216 MHz with 1 MB of flash memory in a 100-pin LQFP package. The verified distributor data identifies 1 MB organized as 1M x 8, 216 MHz processing, CAN connectivity, and a 3.3 V device description. These headline resources suit embedded control systems that need substantial local firmware storage, real-time signal processing, and a broad peripheral interface set. A microcontroller is an embedded-computing semiconductor that integrates a processor core, nonvolatile program memory, data memory, and peripherals such as communication controllers, timers, and analog interfaces. The STM32F7 series belongs to the high-performance Arm Cortex-M microcontroller hierarchy. It combines real-time control capabilities with digital signal-processing-oriented resources, making it relevant to industrial controllers, communications equipment, and data-acquisition systems. The verified listing highlights a 32-bit Arm Cortex-M7 core, 216 MHz maximum clock, 1 MB flash, CAN connectivity, and a 100-LQFP 14 x 14 mm package. Search results also describe a 3.3 V part. These features distinguish it from lower-pin-count microcontrollers and provide 100 external connections in a surface-mount design. Because the supplied snippets do not expose complete peripheral inventories, detailed RAM, voltage-range, and pin-function claims remain marked as data needed rather than inferred. The Cortex-M7 architecture supports real-time workloads while the 1 MB program-memory configuration offers room for larger embedded applications. CAN connectivity is relevant to industrial and vehicle-adjacent networking, although network transceiver selection and termination remain board-level requirements. A 100-pin LQFP also provides more I/O than smaller 48-pin or 64-pin packages, allowing designers to connect displays, sensors, communications transceivers, and control outputs without an extremely fine-pitch BGA layout. Typical design uses include industrial automation, CAN-connected control panels, instrumentation, communications equipment, audio and DSP-oriented control, and high-performance sensor hubs. Firmware migration still requires matching clock trees, peripheral instances, pin assignments, memory maps, and development-tool support; a similar specification alone does not guarantee software compatibility. Place all decoupling capacitors and low-speed support circuitry according to the official device documentation, and validate every power domain and signal standard before PCB release. Because the complete pinout and electrical limits were not included in the verified snippets, consult the manufacturer datasheet and reference manual before routing or assembly. This page consolidates verified distributor specifications, a genuine distributor price reference, honest sourcing limits, and practical selection guidance. It distinguishes confirmed STM32F746VGT6 facts from unverified details rather than filling gaps with assumed pin, memory, or compliance data.

RFQ צור קשר
STM32F746VGT6E - 216MHz Cortex-M7 1MB Flash MCU | STMicroelectronics
STM32F746VGT6E

STM32F746VGT6E - 216MHz Cortex-M7 1MB Flash MCU | STMicroelectronics

STMicroelectronics STM32F746VGT6E is a 32-bit ARM Cortex-M7 microcontroller operating up to 216 MHz, with 1 MB of flash memory in a 100-pin LQFP package. The STM32F746 family provides high-performance embedded control with a single-precision floating-point unit, DSP instructions, and a broad set of peripherals for industrial, communications, consumer, and embedded-control designs. Its 1 MB flash configuration provides room for a substantial firmware image, boot code, application logic, and configuration data. The STM32F746VGT6E belongs to the STM32F7 microcontroller family, which combines high-performance processing with integrated real-time control and connectivity functions. This device is suitable when a design requires more processing capability than a typical low-cost Cortex-M microcontroller, particularly when graphics acceleration, high-speed control, or floating-point signal processing is needed. The manufacturer documentation identifies the STM32F745xx and STM32F746xx devices as Cortex-M7 products with up to 216 MHz operation. Important device features include the Arm Cortex-M7 processor, single-precision floating-point support, DSP capabilities, 1 MB flash memory, and a 100-LQFP package. The 14 mm x 14 mm package provides a practical option for designs requiring a high pin count while retaining a conventional leaded surface-mount footprint. The exact RAM configuration, operating-temperature grade, Ethernet and display peripherals, and electrical limits should be confirmed against the manufacturer datasheet before production release. Typical applications include industrial automation controllers, human-machine interfaces, communications equipment, motor-control platforms, data acquisition units, and connected embedded systems. In these systems, the 216 MHz Cortex-M7 core can execute control algorithms while the STM32F7 peripheral set handles communication and external interfaces. Applications that require deterministic behavior should include appropriate startup, clock, memory, and low-power design review. The most important design consideration is confirming the complete device configuration from the STMicroelectronics ordering information and datasheet, including memory size, temperature range, package, and exposed peripheral options. PCB layouts should follow the manufacturer land-pattern and pin-definition guidance rather than relying only on the generic LQFP-100 footprint. Software should also be validated for the exact STM32F746VGT6E ordering code and its configured clock tree. This product page combines manufacturer specifications, distributor pricing and availability, application guidance, design notes, and clearly documented data gaps. It is intended to support engineering selection and sourcing decisions without presenting unverified electrical values as datasheet facts.

RFQ צור קשר
STM32F746VGT6G - 216MHz Cortex-M7 MCU | STMicroelectronics
STM32F746VGT6G

STM32F746VGT6G - 216MHz Cortex-M7 MCU | STMicroelectronics

STMicroelectronics STM32F746VGT6G is a 32-bit Arm Cortex-M7 microcontroller operating at up to 216 MHz, with 1 MB of flash memory in a 100-LQFP 14 x 14 mm package. The device combines a high-performance 32-bit RISC core with substantial embedded memory and extensive peripheral integration, making it suitable for graphics-capable industrial, communications, consumer, and embedded control systems. An Arm Cortex-M7 microcontroller is part of the embedded processor hierarchy: Cortex-M core, 32-bit microcontroller, embedded controller, and semiconductor. The STM32F7 family is designed for high-performance embedded applications where processing throughput, integrated memory, real-time control, and multiple communication interfaces matter more than the minimal footprint and cost of a smaller microcontroller. The STM32F746VGT6G provides up to 216 MHz operating frequency and 1 MB of flash memory. Its 100-pin LQFP package exposes substantially more I/O than smaller STM32 devices, supporting integration with external memory, displays, communications equipment, and industrial peripherals. The G ordering suffix distinguishes this specified orderable device, while its electrical details beyond the verified product and distributor information should be confirmed against the STMicroelectronics datasheet before design release. The STM32F746 platform uses the Arm Cortex-M7 architecture described by STMicroelectronics for the STM32F745xx and STM32F746xx families. This core is suitable for responsive control and multimedia workloads because it provides substantially greater performance than entry-level 8- or 32-bit microcontrollers. Firmware, peripherals, clocking, memory configuration, and development-software support must be checked for each exact variant rather than inferred from the family name alone. Typical application directions include industrial control panels, communications equipment, audio and multimedia systems, data acquisition, and networked embedded products. Its 216 MHz core can support more demanding control loops and protocol processing, while the 100-LQFP package simplifies access to numerous I/O signals. The package also requires careful PCB routing and thermal design because fine-pitch leads and a large exposed land pattern must be assembled and connected correctly. Designers should use the exact STMicroelectronics STM32F746VG documentation for pin assignment, power supplies, decoupling, clock-tree configuration, memory limits, peripheral functions, and programming. The verified distributor listings identify the device as a 32-bit, 216 MHz Cortex-M7 with 1 MB of flash, but they do not provide a complete electrical table or public pin map in the supplied data. This page combines the verified manufacturer and distributor information with practical sourcing guidance, qualification of same-brand replacement candidates, and an explicit comparison framework. It distinguishes confirmed facts from parameters that still require datasheet verification, helping engineers make an evidence-based decision without mistaking a family-level candidate for an automatically qualified drop-in replacement.

RFQ צור קשר
STM32F746VGT7 - 216MHz Cortex-M7 1MB MCU | STMicroelectronics
STM32F746VGT7

STM32F746VGT7 - 216MHz Cortex-M7 1MB MCU | STMicroelectronics

The STMicroelectronics STM32F746VGT7 is a 32-bit Arm Cortex-M7 microcontroller operating up to 216 MHz, with 1 MB of Flash and 100-pin LQFP packaging in a 14 x 14 mm footprint. It combines high-performance embedded control with DSP-oriented arithmetic and extensive serial connectivity. The device is positioned for industrial control, communications equipment, human-machine interfaces, audio and networked embedded systems requiring more processing performance than typical Cortex-M4 designs. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces onto one device. The STM32F746 family belongs to the hierarchy embedded MCU, 32-bit microcontroller, Arm Cortex-M7 MCU, and STM32 family. Its 32-bit architecture provides efficient control-loop execution while dedicated hardware accelerates tasks such as graphics, communications, and signal processing. Verified manufacturer and distributor data identify a maximum operating frequency of 216 MHz and 1 MB of Flash. The 100-LQFP package supports compact, surface-mount PCB assembly while exposing substantially more I/O than small-outline packages. The DigiKey listing specifically identifies the part as an Arm Cortex-M7 STM32F7 MCU with 1 MB organized as 1M x 8 Flash. The ST product-family page confirms that STM32F745xx and STM32F746xx devices use the high-performance 32-bit Arm Cortex-M7 RISC core. The Cortex-M7 platform is useful when software benefits from single-precision floating-point and DSP instructions, deterministic interrupt handling, and a broad peripheral ecosystem. Although the verified snippets do not enumerate the complete GPIO count, ADC channels, timers, or communication blocks, those details must be confirmed in the manufacturer datasheet before final schematic and firmware planning. The 1 MB Flash capacity also gives embedded developers room for larger application images, boot code, and protocol stacks. Typical STM32F746VG applications include industrial automation controllers, networked gateways, motor-control equipment, digital audio interfaces, human-machine interfaces, and connected sensor platforms. Designers should select the device when its Cortex-M7 performance, 1 MB Flash, and 100-LQFP I/O density meet the board requirements without requiring a higher-end Cortex-M33, Cortex-M55, or application processor. The primary design consideration is package-level verification: confirm every alternate function, power pin, ground connection, and exposed peripheral against the official pinout before PCB release. Place decoupling capacitors close to each supply pin, route high-speed interfaces with controlled impedance, and validate the external memory interface and clock plan against the manufacturer reference design when fitted. This page consolidates verified distributor availability, pricing references, same-package replacement candidates, and application guidance. It also distinguishes confirmed facts from specification fields that still require pin-level or electrical detail from the manufacturer datasheet.

RFQ צור קשר
STM32F746ZET6 - 216MHz Cortex-M7 MCU, 512KB Flash | STMicroelectronics
STM32F746ZET6

STM32F746ZET6 - 216MHz Cortex-M7 MCU, 512KB Flash | STMicroelectronics

The STMicroelectronics STM32F746ZET6 is a 32-bit Arm Cortex-M7 microcontroller operating at up to 216 MHz, with 512 KB of Flash memory and a 144-lead LQFP package measuring 20 mm by 20 mm. It belongs to the STM32F7 high-performance microcontroller family and combines a 216 MHz Cortex-M7 processor with DSP capability and floating-point unit support. The STM32F746ZET6 is therefore suitable for control-intensive embedded systems requiring substantial processing speed, deterministic real-time response, and a broad set of serial and display-oriented peripherals. A microcontroller is a programmable integrated circuit containing a processor core, memory, and peripherals on one package. The STM32F7 series sits within the hierarchy of microcontrollers, embedded processors, and semiconductor devices. Unlike a discrete general-purpose processor, an STM32 microcontroller integrates Flash, RAM, clocking, communications, timers, and GPIO into a compact device. The STM32F746ZET6 extends this integration with an Arm Cortex-M7 core optimized for high-performance embedded control, including DSP instructions and floating-point arithmetic. The verified product listing identifies the Cortex-M7 architecture, 216 MHz maximum operating frequency, 512 KB of Flash, and 144-LQFP package. Additional family-level information identifies an Art Accelerator, L1 cache, SDRAM support, and TFT-controller capability for the STM32F745xx and STM32F746xx device families. These features support graphics-oriented user interfaces, communications equipment, industrial controllers, audio processing, and real-time signal-processing systems. The LQFP package also provides inspectable leads and a large thermal pad footprint compared with compact QFN packages. The 216 MHz Cortex-M7 core gives software more instruction bandwidth than lower-frequency Cortex-M devices while retaining the deterministic execution model expected of embedded systems. DSP and FPU support can reduce the computational overhead associated with filtering, transforms, control loops, and floating-point math. The family-level Art Accelerator can accelerate selected graphical operations, while L1 cache helps improve data-access performance in code and data working sets. Exact RAM size and peripheral configurations were not included in the supplied verified data and therefore require confirmation in the official STM32F746ZE documentation. Typical applications include industrial automation, human-machine interfaces, communications infrastructure, test and measurement equipment, medical monitoring, and consumer devices with graphical displays. In an HMI, the STM32F746ZET6 can combine the Cortex-M7 processing capability with TFT control and external SDRAM. In communications equipment, its high-performance core can support protocol processing and real-time control. For control cabinets, industrial displays, or audio-oriented embedded products, the 144-LQFP package simplifies prototype assembly and provides ample external routing flexibility. Designers should verify the complete pin multiplexing, power-supply requirements, clock configuration, memory map, and peripheral set against the manufacturer documentation before layout. Because this exact ordering code uses a 144-lead LQFP package, a complete 144-pin schematic and PCB footprint review is essential. Decoupling, analog-supply isolation, high-speed clock routing, and SDRAM layout should follow the relevant STMicroelectronics hardware guidance rather than relying solely on generic MCU layout practice. This product page consolidates the verified manufacturer, distributor, and distributor-indexed data for the STM32F746ZET6, distinguishes the available same-brand STM32F7 drop-in options, and identifies design information that still requires verification from the official datasheet. It is intended to accelerate component identification and sourcing without presenting unverified electrical details as manufacturer specifications.

RFQ צור קשר