מוצרים (44,000+)

TJA1442BTK/0Z - 5 Mbit/s CAN FD Transceiver | NXP
TJA1442BTK/0Z

TJA1442BTK/0Z - 5 Mbit/s CAN FD Transceiver | NXP

The NXP Semiconductors TJA1442BTK/0Z is a high-speed CAN FD transceiver with standby mode, designed for Classical CAN and CAN FD communication systems. It supports CAN FD fast-phase data rates up to 5 Mbit/s and is packaged in an 8-HVSON package measuring 3 x 3 mm. The device is intended for use between a CAN controller and the physical two-wire CAN bus. A CAN transceiver is an interface IC that converts logic-level signals from a CAN controller into the differential electrical signaling used on a CAN bus, while converting received bus signals back into controller-compatible logic. The TJA144x family belongs to the broader hierarchy of CAN interface ICs, network interface ICs, interface semiconductors, and communication semiconductors. Its CAN FD capability supports higher-bandwidth automotive and industrial networks while retaining compatibility with conventional CAN systems. The TJA1442BTK/0Z includes a standby operating mode for systems that need to reduce activity when the communication network is not in use. The manufacturer positions the TJA1442 as a straightforward replacement for existing high-speed Classical CAN and CAN FD transceivers, including the NXP TJA1042 and TJA1044GT families. This replacement positioning helps support design updates and retrofit applications without changing the surrounding hardware and software architecture. The device is suitable for automotive electronic control units, battery-management systems, charging equipment, industrial automation controllers, robotics, building automation, and embedded CAN FD gateways. Its small 3 x 3 mm HVSON footprint is useful for compact control boards where component placement, routing, and thermal management must be carefully controlled. For new designs, confirm the controller voltage levels, bus termination strategy, transceiver mode-control requirements, and the exposed-pad soldering recommendations in the manufacturer datasheet. In retrofit designs, verify that every pin function and supply reference matches the original transceiver before substituting the TJA1442BTK/0Z. This product page combines the manufacturer’s device positioning, package information, CAN FD speed capability, replacement context, and practical design guidance to support component selection, footprint review, and PCB integration.

RFQ צור קשר
TJA1443AT/0Z - 5 Mbit/s CAN FD Transceiver | NXP
TJA1443AT/0Z

TJA1443AT/0Z - 5 Mbit/s CAN FD Transceiver | NXP

NXP Semiconductors TJA1443AT/0Z is a high-speed CAN transceiver with Standby, Sleep and Listen Only modes, operating up to 5 Mbit/s in a 14-pin SOIC package. The device connects a CAN or CAN FD controller to a physical two-wire CAN bus and supports VIO, EN, STB and ERR control or status functions. It is positioned as a hardware-compatible successor to established high-speed CAN transceivers. A CAN transceiver is an interface integrated circuit that translates logic-level controller signals into differential bus voltages and converts received bus states back into controller-compatible signals. CAN belongs to the broader hierarchy of network interfaces, data converters and interface ICs. Its two-wire physical layer allows multiple nodes to communicate over a shared bus while supporting arbitration, fault handling and standardized high-speed operation. The TJA1443AT/0Z supports data rates up to 5 Mbit/s and includes Standby, Sleep and Listen Only operating modes. These modes allow a design to reduce activity when communication is not required while preserving a path for wake-up or bus monitoring. VIO provides a logic-side interface referenced to the selected digital supply, while EN, STB and ERR support local mode control and error-state monitoring. According to the NXP TJA1443 datasheet, the device implements the CAN physical layer defined by ISO 11898-2:2016 and is compatible with the high-speed requirements associated with SAE J2284-1 through SAE J2284-5. The TJA144x family is intended to interoperate with established high-speed Classical CAN and CAN FD controllers, helping simplify upgrades to existing hardware and software platforms. Typical uses include automotive and industrial CAN FD nodes, gateway modules, body and comfort controllers, diagnostic interfaces, sensor concentrators and embedded communications equipment. It is particularly appropriate when a compact surface-mount transceiver, selectable low-power modes and centralized bus-fault awareness are required. Board layout must preserve the differential CAN_H and CAN_L return path and provide suitable termination and common-mode protection for the target network. For a new design, compare the device against the TJA1443ATK/0Z automotive-grade ordering option and confirmed alternatives such as TCAN1043A. Do not assume electrical or qualification equivalence from package similarity alone; verify supply voltage, mode-control polarity, transceiver delay, bus fault behavior and automotive qualification against the system requirements. This page combines the manufacturer datasheet, product-page information, commercial sourcing guidance, package-level comparison and practical replacement criteria. It highlights the operating modes, standards context and PCB considerations engineers need when evaluating the TJA1443AT/0Z for a high-speed CAN or CAN FD physical layer.

RFQ צור קשר
TJA1443ATK/0Z - 5Mbit/s CAN FD Transceiver | NXP
TJA1443ATK/0Z

TJA1443ATK/0Z - 5Mbit/s CAN FD Transceiver | NXP

The NXP Semiconductors TJA1443ATK/0Z is a high-speed CAN and CAN FD transceiver with a data rate up to 5 Mbit/s, a 4.5 V to 5.5 V supply range, and a 14-terminal HVSON surface-mount package. It provides the physical-layer interface between a CAN controller and a two-wire CAN bus, with VIO, ENABLE, standby, and error-control functions identified in the product listing. A high-speed CAN transceiver is an interface integrated circuit that converts logic-level controller signals into the dominant and recessive voltage states used on a CAN bus. The TJA1443 belongs to the broader network-interface hierarchy: CAN transceiver, physical-layer interface, interface IC, and semiconductor. Its implementation supports high-speed Classical CAN and CAN FD systems while simplifying conversion between a digital CAN controller and the bus wiring. The principal operating features include a maximum listed signaling rate of 5 Mbit/s, a 4.5 V to 5.5 V core-supply range, and an I/O supply identified as VIO. The device also offers Standby, Sleep, and Listen Only operating features, allowing designers to select power-state behavior according to vehicle-network activity. NXP describes the TJA1443 family as interoperable with high-speed CAN transceivers and compatible with the physical layer defined by ISO 11898-2:2016 and SAE J2284-1 through J2284-5. The TJA1443 architecture is intended to replace existing high-speed Classical CAN and CAN FD transceiver designs without changing the hardware or software. Its EN, STB, TXD, RXD, VIO, VCC, CANH, CANL, and ground connections support normal communication, bus signaling, supply control, and low-power states. The HVSON-14 package has 14 terminals and measures approximately 3 mm by 4.5 mm according to distributor package information. Typical uses include automotive electronic control units, body-control modules, gateway controllers, infotainment systems, comfort equipment, and industrial CAN FD gateways. The 5 Mbit/s capability is relevant to powertrain, chassis, and vehicle-backbone networks where higher bus bandwidth than Classical CAN may be required. The configurable low-power modes also suit mixed-activity vehicle networks in which nodes spend substantial time idle. For PCB implementation, use the manufacturer land pattern and pin-description table for the 14-terminal HVSON package. Place the transceiver and its required support components close to the CAN connector and controller, and follow the recommended bus-side routing and decoupling guidance in the TJA1443 datasheet. Confirm logic thresholds against the selected VIO voltage before finalizing external pull resistors. This page consolidates the manufacturer specifications, lifecycle information, qualified comparisons, package details, and practical application guidance needed to evaluate the TJA1443ATK/0Z. It also distinguishes true same-package replacements from functionally similar devices whose package or qualification must be reviewed before a PCB substitution.

RFQ צור קשר
TJA1448AT/0Z - 5Mbps Dual CAN Transceiver | NXP | Automotive
TJA1448AT/0Z

TJA1448AT/0Z - 5Mbps Dual CAN Transceiver | NXP | Automotive

NXP Semiconductors TJA1448AT/0Z is a dual high-speed CAN transceiver with Standby mode for connecting a CAN or CAN FD protocol controller to a two-wire CAN bus. The device supports data rates up to 5 Mbit/s, operates from a 5 V supply, and is packaged in a 14-pin SOIC. It is designed for automotive and industrial CAN communication systems requiring two CAN channels in one package. The TJA1448 family is intended to provide a simple replacement for dual high-speed Classical CAN and CAN FD transceivers, helping simplify hardware and software retrofitting. A CAN transceiver is the physical-layer interface between a digital CAN controller and the differential CAN bus. It converts logic-level TXD and RXD signals into bus-compatible differential signaling, while providing the receiver path back to the controller. The TJA1448 provides two complete CAN channels, making it useful where a system requires redundant channels, gateway isolation, or simultaneous communication across separate CAN buses. The TJA1448AT/0Z supports Normal, Silent, Sleep, and Standby operating modes according to the product information. Its dual-channel architecture, 5 Mbit/s capability, and 5 V operation make it appropriate for automotive body and chassis electronics, industrial automation equipment, robotics, transport systems, and CAN FD gateways. Standby mode is particularly useful in systems that need to retain low-power behavior while supporting controlled transitions between operating states. The device is identified as an automotive AEC-Q100 part in distributor product information, making it relevant to automotive qualification programs. Its 14-pin SOIC package supports conventional surface-mount assembly and integration into compact controller boards. Because the TJA1448 family is described as pin-compatible with existing dual high-speed CAN and CAN FD transceiver designs, it can be considered during replacement projects after confirming the exact pin functions, operating-mode logic, and bus timing of the incumbent device. For robust implementation, place the transceiver close to the CAN connector and route the CANH and CANL conductors as a differential pair with controlled impedance. Keep the bus stubs short, provide the required termination at both ends of the network, and follow the decoupling and grounding recommendations in the NXP datasheet. Review low-power mode transitions and fault behavior against the system’s wake-up and diagnostic requirements before finalizing the design.

RFQ צור קשר
TJA1448ATK/0Z - 5 Mbps Dual CAN FD Transceiver | NXP
TJA1448ATK/0Z

TJA1448ATK/0Z - 5 Mbps Dual CAN FD Transceiver | NXP

The NXP Semiconductors TJA1448ATK/0Z is a dual high-speed CAN and CAN FD transceiver with two independent channels, supporting data rates up to 5 Mbps in a 14-pin HVSON package measuring 3 x 4.5 mm. It operates from a 4.5 V to 5.5 V supply and includes standby mode, bus wakeup functionality, and advanced fault protection for automotive and industrial CAN networks. A CAN transceiver is the physical-layer interface between a CAN or CAN FD protocol controller and a two-wire CAN bus. In the wider electronics hierarchy, a transceiver belongs to the interface-IC family, where it converts controller logic levels into bus-compatible signals and converts bus activity into logic-level receive data. The TJA1448ATK/0Z combines two channels in one package, allowing one controller or gateway to connect to two independent CAN buses or to two channels of the same network. Key features include dual-channel CAN FD operation, a maximum supported data rate of 5 Mbps, and a 4.5 V to 5.5 V operating-supply range. The device is identified as a 2/2 transceiver half CANbus device in the 14-HVSON 3 x 4.5 mm package. The exposed-pad package construction supports compact automotive PCB layouts while providing an effective thermal path when the board is designed with suitable copper area. The TJA144x family is designed as a drop-in replacement for high-speed classic CAN and CAN FD transceivers, helping preserve hardware and software architecture when upgrading a communication link. The standby mode provides a controlled operating state for systems where the bus interface must be disabled or managed according to the vehicle or equipment power state. Bus wakeup support is useful in distributed automotive systems where a node must detect bus activity before returning to a fully active state. Typical applications include automotive CAN FD gateways, body-control modules, electric-vehicle communication networks, industrial vehicle systems, and embedded CAN FD controllers. The dual-channel arrangement can reduce board area when two CAN links are required, while the 5 Mbps capability supports higher-throughput CAN FD payloads and diagnostics. Designers should use the manufacturer's pin description table and recommended connection details when assigning PCB tracks. Decoupling capacitors should be placed close to the supply pins, and the exposed thermal pad should be connected according to the package land-pattern guidance. The CAN bus conductors and ground-return path require careful high-speed layout planning, including controlled impedance and minimized loop area. This product page combines the NXP TJA1448 family information, package details, verified distributor references, and practical interface-design guidance to support component selection, PCB implementation, and drop-in replacement evaluation.

RFQ צור קשר
TJA1448BT/0Z - Dual 5Mbps CAN FD Transceiver | NXP
TJA1448BT/0Z

TJA1448BT/0Z - Dual 5Mbps CAN FD Transceiver | NXP

NXP Semiconductors TJA1448BT/0Z is a dual-channel high-speed CAN FD transceiver rated for 5 Mbit/s communication, a 4.5 V to 5.5 V supply range, and operation from -40°C to +150°C. The device is supplied in a 14-pin SOIC package and provides two independent CAN physical-layer channels for interfaces between CAN controllers and two-wire CAN buses. A CAN transceiver is the physical-layer interface between a digital CAN or CAN FD controller and a differential two-wire bus. It converts controller logic levels into CAN bus signals and reconstructs received bus information for the controller. Within the power-management and semiconductor hierarchy, the TJA1448 belongs to the CAN interface IC class, supports ISO 11898-2:2016 physical-layer operation, and is interoperable with high-speed CAN systems. The TJA1448BT/0Z includes Normal and Standby operating modes, low-power operation, wake-up support, transmitter-dominant timeout, electrostatic-discharge protection, undervoltage protection, and thermal shutdown protection. Its VIO interface allows direct connection to either 3.3 V or 5 V microcontrollers, reducing the need for level-shifting circuitry when the transceiver and controller use different logic voltages. The device supports Classical CAN and CAN FD signaling at data rates up to 5 Mbit/s. Two integrated channels make it suitable for systems that need two CAN bus connections without using separate single-channel transceivers. Its high-temperature operating range supports industrial, automotive, and communications equipment where the ambient enclosure temperature may substantially exceed conventional commercial limits. Typical uses include automotive body and powertrain electronics, industrial automation equipment, building automation gateways, CAN-based sensors, robotics, and embedded control systems. In a dual-channel installation, each channel connects to a separate CAN FD controller interface and its associated differential bus wiring while sharing the device supply and operating-mode controls. Designers should preserve the datasheet-defined decoupling and bus-termination layout, validate logic compatibility at VIO, and verify that the PCB footprint matches the 14-pin SOIC outline. The standby and wake-up functions should be checked against the controller's power-management strategy so the remote node can enter low-power operation without preventing required bus communication. This page combines the manufacturer identification, package and feature information, replacement context, comparison parameters, and application-oriented design guidance into a concise engineering reference for selecting and implementing the TJA1448BT/0Z.

RFQ צור קשר
TJA1448BTK/0Z - Dual CAN FD Transceiver | NXP
TJA1448BTK/0Z

TJA1448BTK/0Z - Dual CAN FD Transceiver | NXP

The NXP TJA1448BTK/0Z is a dual-channel, high-speed CAN and CAN FD transceiver with two independent transmit and receive channels, standby support, and operation from a 4.5 V to 5.5 V supply. The device is packaged in a 14-HVSON surface-mount package measuring 3 mm by 4.5 mm and supports CAN FD communication at data rates up to 5 Mbit/s. A CAN transceiver is an interface IC that connects a CAN protocol controller to a physical two-wire CAN bus. It belongs to the CAN interface transceiver class, within the broader interface IC and semiconductor hierarchy. The controller generates and interprets digital CAN frames, while the transceiver converts those signals into bus-compatible electrical levels and receives bus signals back. The TJA1448 supports both Classical CAN and CAN FD networks, making it suitable for systems that need a compact dual-channel physical layer. The TJA1448 family combines two high-speed CAN channels in one package. Its standby mode provides a way to place the transceiver into a reduced operating state when communication is temporarily unnecessary. Its dual-channel architecture can reduce component count in controllers, gateways, industrial nodes, or automotive modules that require two independent CAN FD links. The NXP manufacturer overview identifies the TJA1448 as part of a family designed for data rates up to 5 Mbit/s. The TJA1448 is also positioned as a hardware-compatible replacement for earlier dual high-speed Classical CAN and CAN FD transceivers. The manufacturer datasheet specifically identifies the NXP TJA1059 as a device that can be replaced by the TJA1448. This makes the part useful for retrofitting existing dual-channel CAN designs where board space, standby behavior, and CAN FD capability are important selection criteria. Typical uses include industrial automation controllers, vehicle body and comfort modules, distributed sensor nodes, CAN FD gateways, diagnostic equipment, and embedded communication systems. Two CAN channels can serve separate buses or maintain redundant communication paths, subject to the electrical requirements of each network. The compact 14-HVSON package is particularly useful when board area is constrained and high routing density is required. Layout is the primary implementation consideration for a high-speed CAN interface. Keep CAN bus traces short, provide a continuous return path beneath the bus, place the bus-side termination network at the appropriate network endpoints, and decouple the transceiver supply close to the device. The CANH and CANL connections should also be routed as a differential pair with consistent geometry and minimal stubs. This page combines the manufacturer product information, documented CAN FD capability, package identity, standby feature, replacement context, practical layout guidance, and verified sourcing links. It is designed to help engineers identify whether the TJA1448BTK/0Z fits a dual CAN FD interface and how it compares with a documented pin-compatible replacement.

RFQ צור קשר
TJA1448CTK/0Z - Dual CAN FD Transceiver | NXP
TJA1448CTK/0Z

TJA1448CTK/0Z - Dual CAN FD Transceiver | NXP

NXP Semiconductors TJA1448CTK/0Z is a dual high-speed CAN physical-layer transceiver with two independent CAN channels, Standby mode, and wake-up source recognition in a 14-HVSON package measuring 3 mm by 4.5 mm. It interfaces a CAN or CAN FD controller with a physical two-wire CAN bus and implements the physical layer defined in ISO 11898-2:2016 and SAE J2284-1 through SAE J2284-5. The device is intended as a simple replacement for dual high-speed Classical CAN and CAN FD transceivers such as the NXP TJA1059, allowing existing hardware and software designs to be retained during upgrades. The TJA1448 belongs to the TJA144x transceiver family and combines standard CAN bus operation with low-power management functions. Standby mode helps reduce current consumption when the node is not communicating, while wake-up source recognition distinguishes bus activity from a local wake-up request. These features are useful in distributed automotive and industrial systems where multiple network nodes must sleep, monitor the bus, and restart without continuous full-power operation. The exact electrical limits and timing values must be checked in the manufacturer datasheet before finalizing a design. The 14-HVSON package is intended for compact surface-mount assemblies. Its exposed-pad construction provides a thermal path from the transceiver to the PCB, but correct land pattern design and adequate copper are required to dissipate heat effectively. The package drawing and pin configuration in the NXP pinning documentation should be used directly during PCB layout because exposed-pad connections and pad numbering must match the exact CTK variant. Typical applications include CAN FD gateways, body and comfort controllers, battery-management systems, industrial automation equipment, distributed sensors, motor-control modules, and gateway interfaces between higher-speed automotive Ethernet networks and legacy CAN buses. In a CAN FD network, the transceiver provides the physical layer while the CAN controller handles arbitration, frame formatting, error handling, and data-rate negotiation. Designers should pay attention to bus termination, common-mode behavior, loop delay, bus fault recovery, and decoupling when evaluating this transceiver. CAN_H and CAN_L require a correctly terminated bus, while RXD provides the logic-level receive signal for the controller and STB or EN-related control can place the device into a lower-power state. The datasheet pin table should guide every net assignment. This page combines the manufacturer interface information, lifecycle information, cross-reference results, practical PCB guidance, and focused selection criteria to support faster engineering decisions. It also highlights the limits of verified drop-in alternatives: the available cross-reference results identify the TJA1448 family and its replacement role but do not establish five distinct cross-manufacturer alternatives with verified 14-HVSON pin compatibility.

RFQ צור קשר
TJA144x - Dual CAN FD Transceiver Family | NXP Semiconductors
TJA144x

TJA144x - Dual CAN FD Transceiver Family | NXP Semiconductors

The NXP TJA144x is a family of dual high-speed CAN/CAN FD transceiver ICs that provide an interface between a Controller Area Network (CAN) or CAN FD protocol controller and the physical two-wire CAN bus, supporting data rates up to 5 Mbit/s and compliant with ISO 11898-2, SAE J2284 and AEC-Q100 Grade 0. The family is offered in HVSON-14 (3.6x2.0 mm) and HVSON-8 packages, with variants including Basic, Standby, Dual Standby, and Sleep power modes for different power-management strategies in automotive networks. The TJA144x operates from a 4.5V to 40V supply (load-dump tolerant), tolerates -5V to +45V on the bus pins, and integrates dominant-timeout, thermal shutdown, and bus-pin short-circuit protection. A CAN FD transceiver (also called CAN Flexible Data-rate transceiver) is a physical-layer device that converts digital transmit/receive data from a CAN protocol controller into differential voltage levels on the CANH/CANL bus wires. As the boundary between the protocol controller and the bus medium, it provides dominant/recessive arbitration, common-mode rejection, and EMC robustness required in automotive environments. Within the in-vehicle network hierarchy, the CAN transceiver sits below the microcontroller (MCU) and above the wiring harness, forming the physical layer of the OSI seven-layer reference model for CAN. Key features of the TJA144x family include an ultra-low-current Standby mode with remote CAN wake-up detection, very low electromagnetic emission (EME) and high electromagnetic immunity (EMI), excellent ESD protection (±8 kV HBM on bus pins), and pin compatibility with the prior TJA1042/1051 generations for easy retrofit. The HVSON-14 package exposes an exposed thermal pad for low thermal resistance, and the HVSON-8 variant offers a compact footprint for ECU miniaturization. Devices are AEC-Q100 Grade 0 qualified for automotive temperatures from -40 °C to +150 °C. Typical applications include body control modules (BCM), gateway ECUs, ADAS sensor nodes, instrument cluster CAN backbones, electric-vehicle battery-management communication, and any in-vehicle network that requires migration from classical CAN to CAN FD without redesigning the PCB or firmware. The 5 Mbit/s CAN FD capability is essential for high-bandwidth automotive Ethernet-cascade gateways and radar/LiDAR sensor clusters. When designing with the TJA144x, ensure the VCC supply is decoupled with a 100 nF ceramic capacitor close to pin VCC, and that the bus terminations (typically 120 Ω) are present at each end of the CAN bus segment. The VIO pin on HVSON-14 variants allows level-shifting between the 3.3V or 5V MCU and the 5V transceiver logic domain. This page synthesizes distributor pricing, drop-in alternatives within the TJA144x family and from competitor manufacturers, and practical design notes not consolidated on the manufacturer datasheet, giving design engineers a single decision-ready reference for CAN FD physical-layer selection.

RFQ צור קשר
TJA1462AT/0Z - 8Mbit/s CAN FD SIC Transceiver | NXP
TJA1462AT/0Z

TJA1462AT/0Z - 8Mbit/s CAN FD SIC Transceiver | NXP

The NXP Semiconductors TJA1462AT/0Z is an 8 Mbit/s CAN Signal Improvement Capability transceiver with standby mode and a VIO interface, packaged in an 8-pin SOIC. It connects a CAN or CAN FD controller to a two-wire automotive CAN bus while implementing CAN SIC according to ISO 11898-2:2024. Its principal advantages are reduced signal ringing, improved bit-timing symmetry, and support for larger bus networks without changing the host hardware or software. A CAN transceiver is the physical-layer interface between a digital bus controller and the differential CAN bus. The TJA1462 belongs to the TJA146x family of CAN and CAN FD transceivers, combining bus-driver, receiver, logic-level I/O, and standby functionality in one IC. The VIO pin permits the logic-side supply voltage to be selected independently from the transceiver supply, while STB provides a low-power control input. The TJA1462 supports reliable CAN FD communication at data rates up to 8 Mbit/s. According to the manufacturer product information, reducing signal ringing and improving bit-timing symmetry enables larger CAN FD networks. CAN SIC also improves compatibility in installations where long stubs, unequal trace lengths, or multiple termination conditions would otherwise distort edge timing. Standby mode provides a practical way to reduce activity when the network is not being used. The device is intended as a retrofit option for existing high-speed Classical CAN and CAN FD designs using compatible NXP transceivers such as the TJA1042 or TJA1044. NXP states that the TJA1462 offers pin compatibility and is designed to avoid hardware and software changes. The TJA1462AT variant uses the SO8 package, while the HVSON8 option is a different package and is therefore not a drop-in substitute. Typical uses include automotive CAN FD gateways, electric-vehicle body controllers, industrial vehicle networks, engine controllers, lighting controllers, and battery-management systems. The 150°C temperature indication associated with the AT automotive ordering variant makes it suitable for applications requiring an extended automotive temperature range, subject to the complete datasheet limits and qualification requirements. When laying out a TJA1462AT/0Z board, follow the manufacturer's recommended bus and ground connections, place transceiver decoupling close to the supply pins, and preserve the CAN bus routing and termination guidance in the datasheet. The IC reduces ringing but cannot compensate for an incorrect topology, excessive stub length, poor grounding, or unsuitable termination. This page consolidates the verified NXP product information, manufacturer datasheet link, distributor pricing, pinout, and application guidance with a focus on practical CAN FD integration, retrofit decisions, and same-package replacement constraints.

RFQ צור קשר
TJA1462ATK-S1Z - CAN SIC Transceiver 8Mbit/s | NXP | Automotive
TJA1462ATK-S1Z

TJA1462ATK-S1Z - CAN SIC Transceiver 8Mbit/s | NXP | Automotive

The NXP TJA1462ATK-S1Z is a high-speed CAN Signal Improvement Capability (SIC) transceiver with Standby mode, supporting data rates up to 8 Mbit/s in an 8-pin HVSON package. It implements the CAN physical layer as defined in ISO 11898-2:2024 third edition and SAE J2284-1 through J2284-5, providing full interoperability with classical CAN and CAN FD networks while significantly reducing ringing on the bus. The /S1Z suffix indicates the tape-and-reel packaging variant supplied through NXP's automotive-grade distribution channel. A CAN SIC transceiver is a specialized CAN physical-layer device that conditions the bus signal to suppress the resonance and ringing artifacts that occur at higher CAN FD data rates. By smoothing the recessive-to-dominant and dominant-to-recessive edges, the TJA1462 allows networks to operate reliably at 5 Mbit/s and above, extending the usable bandwidth of CAN FD without requiring twisted-pair cable changes or extra bus nodes. The part family belongs to NXP's TJA146x automotive transceiver family, positioned between classical High-Speed CAN transceivers and emerging CAN XL physical-layer devices. Key features include a separate VIO supply pin for logic-level translation to 1.8V, 3.3V, or 5V microcontrollers without level shifters, ultra-low quiescent current consumption in Standby mode for battery-powered ECUs, bus dominant time-out protection, and under-voltage detection on both VCC and VIO rails. The HVSON-8 (3.0 mm × 3.0 mm) package with an exposed thermal pad enables reflow-compatible SMT assembly and provides a low thermal resistance path for dissipating bus-fault energy. AEC-Q100 Grade 1 qualification and an extended -40 °C to +125 °C operating temperature range make the device suitable for under-hood and body-control automotive applications. Typical applications include automotive body control modules, gateway ECUs bridging CAN FD powertrain domains, ADAS sensor nodes, and industrial CAN FD backbones. The Standby mode with wake-up via bus activity allows the part to be used in always-on networks where quiescent current budget is critical. When designing with the TJA1462ATK-S1Z, place the VCC and VIO decoupling capacitors within 2 mm of their respective pins and connect the exposed pad to a continuous ground copper pour for thermal dissipation and EMC performance. The STB (Standby) pin should be driven by a GPIO capable of retaining state across MCU reset to avoid unintended bus state changes during boot.

RFQ צור קשר
TJA1462ATK/0Z - CAN SIC Transceiver, 8Mbps, HVSON8 | NXP
TJA1462ATK/0Z

TJA1462ATK/0Z - CAN SIC Transceiver, 8Mbps, HVSON8 | NXP

The NXP TJA1462ATK/0Z is a CAN FD signal improvement (SIC) transceiver with Standby mode, supplied in an 8-pin HVSON (SOT-225/SO-8 equivalent leadless) package and qualified to AEC-Q100 for automotive applications. Per the NXP product page, it implements CAN SIC as defined in ISO 11898-2:2024 third edition and supports data rates up to 8 Mbit/s while remaining fully interoperable with high-speed classical CAN and CAN FD networks defined by SAE J2284-1 through SAE J2284-5. What is a CAN SIC transceiver? A Controller Area Network (CAN) transceiver is the physical-layer bridge between a CAN protocol controller (typically an MCU's CAN module) and the differential CAN bus. CAN SIC (Signal Improvement Capability) is an enhancement defined in ISO 11898-2:2024 that shapes the transmitted signal edges to reduce ringing on the bus, allowing larger topologies, longer stub lengths, and higher data rates on CAN FD networks. In the broader taxonomy: CAN transceiver -> CAN interface IC -> wireline transceiver -> interface IC -> semiconductor. The TJA1462 belongs to the TJA146x family that brings this signal-improvement behavior into mainstream automotive designs. Key features highlighted in the verified web data include up to 8 Mbit/s data rate, a low-power Standby mode, a VIO supply pin for direct interfacing with 1.8V-5V MCUs, ISO 11898-2:2024 and SAE J2284-1..5 compliance, and an operating temperature range suitable for under-the-hood automotive use. The HVSON8 package has an exposed pad that improves thermal performance and shortens the ground return, both critical for EMI-sensitive automotive bus nodes. Architecturally, the device integrates the physical bus drivers, slope control for SIC, dominant/recessive bit handling, and a low-power Standby state that can be commanded by the host. By meeting the latest ISO 11898-2:2024 third edition, it is forward-compatible with emerging CAN XL networks and protects existing designs from obsolescence. Typical applications include automotive body and chassis ECUs, CAN FD gateways, powertrain nodes transitioning from classical CAN, industrial CAN FD backbones needing SIC behavior, and any design replacing older CAN transceivers with a Standby-capable SIC part. When designing with this device, pay attention to bus termination (120 ohm at each end), common-mode choke selection, and decoupling of both VCC and VIO to minimize bus emissions. The VIO pin allows the TXD/RXD logic side to be powered at the same rail as the host MCU, eliminating level shifters. This page synthesizes distributor pricing, drop-in same-package alternatives within the TJA1462 family, and practical design notes not found in the manufacturer datasheet.

RFQ צור קשר
TJA1462BT - CAN FD SIC Transceiver, SO8, Standby | NXP
TJA1462BT

TJA1462BT - CAN FD SIC Transceiver, SO8, Standby | NXP

The NXP TJA1462BT is a CAN FD signal improvement capability (SIC) transceiver with Standby mode in an 8-pin SO (SOIC-8) package, supporting data rates up to 8 Mbit/s on the CAN bus. It is part of the TJA146x family that implements CAN Signal Improvement Capability (SIC) per ISO 11898-2:2024 third edition and CiA 601-4, with full interoperability to classical CAN and CAN FD controllers. A CAN transceiver (sometimes called a CAN bus transceiver or CAN physical-layer interface) is the analog interface between a digital CAN protocol controller and the differential CAN bus wires. It converts digital transmit (TXD) bits from the controller into differentially driven bus levels on CANH and CANL, and converts received bus levels back into digital RXD bits, providing galvanic isolation level shifting and ESD protection for the controller. Key features include bus signal improvement that reduces ringing on the CAN bus, allowing larger topologies and higher data rates than classical HS-CAN transceivers. The device operates from a 4.5 V to 5.5 V VCC supply, supports up to 8 Mbit/s in CAN FD networks, and offers a low-power Standby mode entered via the STB pin. The TJA1462 is intended as a pin-compatible drop-in replacement for the TJA1042 or TJA1044 from NXP, enabling direct retrofit without hardware or software changes. The architecture uses a fully differential driver with slope control and integrated bus failure protection, including TXD dominant time-out, bus dominant time-out, and overtemperature shutdown. Receiver symmetry is trimmed to provide reliable operation at recessive voltages as low as 0.5 V on the bus. Typical applications include automotive ECUs, body control modules, gateway ECUs, industrial CAN nodes, and any node that needs to coexist with mixed CAN FD / classical CAN networks on the same bus segment, where the SIC function reduces the required bit time and improves EMC behavior on long stubs. When designing with the TJA1462BT, place a 100 nF decoupling capacitor close to pin 8 (VCC) and ensure the bus termination (typically 120 ohm at each end of the bus) is present. Use the STB pin to enter Standby when the node is inactive to reduce quiescent current, and verify that the bit timing of the CAN controller remains within ISO 11898-2:2024 limits for SIC operation. This page synthesizes the NXP datasheet, real distributor pricing, drop-in alternatives, application context and design notes not collated in any single manufacturer document.

RFQ צור קשר
TJA1462BT/0Z - 8Mbit/s CAN SIC Transceiver | NXP
TJA1462BT/0Z

TJA1462BT/0Z - 8Mbit/s CAN SIC Transceiver | NXP

The NXP Semiconductors TJA1462BT/0Z is a CAN Signal Improvement Capability transceiver with Standby mode, supporting Classical CAN and CAN FD communication at data rates up to 8 Mbit/s in an 8-pin SO8 package. It operates from a 4.5 V to 5.5 V supply, with a typical 5 V operating voltage, and implements CAN SIC according to ISO 11898-2:2024. A CAN transceiver is an interface IC that connects a host controller’s digital TXD and RXD signals to a physical differential CAN bus. Within the hierarchy of interface ICs, transceivers, and automotive communication semiconductors, the TJA1462 combines a CAN controller interface, bus driver, receiver, bus biasing, and signal-improvement functions in one device. The TJA1462BT is designed to reduce signal ringing and improve bit-timing symmetry on the CAN bus. These characteristics can support larger network topologies, more reliable CAN FD communication, and operation at rates up to 8 Mbit/s. Its Standby mode provides a controlled low-power state, while its compatibility-oriented design allows it to replace conventional high-speed Classical CAN and CAN FD transceivers without changing the surrounding hardware or software. The device is intended for automotive networks and also appears in industrial, robotics, and embedded communication systems where robust differential bus behavior is required. It is reported as automotive qualified, RoHS compliant, and available as an active production part. A typical 5 V implementation connects the transceiver between a CAN controller and the CANH/CANL bus, with local bus-bias and termination networks placed according to the manufacturer’s reference layout. The principal design consideration is bus topology. Although CAN SIC can reduce ringing and improve timing symmetry, correct termination, stub length, grounding, and routing remain essential in an 8 Mbit/s network. Designers should also verify Standby-mode control behavior, supply decoupling, and transceiver compatibility before retrofitting an existing board. This page consolidates the verified NXP product information, distributor pricing, standards references, application guidance, and available drop-in replacement candidates into an engineering-focused comparison. It distinguishes confirmed technical facts from package, pinout, and pricing details that still require verification in the full manufacturer data sheet before a production design is released.

RFQ צור קשר
TJA1462BTK/0Z - 8Mbit/s CAN SIC Transceiver | NXP
TJA1462BTK/0Z

TJA1462BTK/0Z - 8Mbit/s CAN SIC Transceiver | NXP

The NXP TJA1462BTK/0Z is a CAN Signal Improvement Capability transceiver with Standby mode, designed for Classical CAN and CAN FD automotive networks. It supports reliable CAN FD communication at data rates up to 8 Mbit/s and is supplied in an 8-pin HVSON surface-mount package measuring 3 x 3 mm. The device implements CAN SIC according to ISO 11898-2:2024 and is positioned as a hardware-compatible upgrade for established high-speed CAN and CAN FD designs. A CAN transceiver is an interface IC that converts logic-level signals from a CAN controller into differential bus signals and converts received bus signals back into controller-compatible logic. Within the network hierarchy, the TJA1462 belongs to the CAN transceiver family, interface IC category, and broader semiconductor and automotive communication electronics markets. Its SIC function reduces signal ringing and improves bit-timing symmetry, helping preserve communication reliability on challenging bus networks. The principal features include support for CAN FD data rates up to 8 Mbit/s, CAN Signal Improvement Capability, and a dedicated Standby operating mode. The 8-HVSON package supports compact PCB layouts, while its 3 x 3 mm land pattern helps reduce the space required by the physical bus interface. The TJA1462 family is also documented as a simple replacement for NXP TJA1042 and TJA1044 high-speed Classical CAN and CAN FD transceivers, allowing existing hardware and software architectures to be retained during selected upgrades. According to the NXP TJA1462 data sheet, the device is intended to improve bit-timing symmetry and suppress ringing on the CAN bus. These characteristics are particularly relevant when a network operates at high CAN FD rates, when bus topology creates reflections, or when additional signal margin is required between the physical transceiver and the CAN controller. The transceiver’s principal design trade-off is that users must follow the NXP pin configuration, supply, decoupling, and bus-connection guidance exactly rather than treating it as a generic high-speed CAN interface. Typical uses include CAN FD gateways, automotive domain controllers, body and comfort modules, electric-vehicle control systems, industrial vehicle networks, and CAN-based diagnostic equipment. In these systems, the TJA1462 serves as the physical-layer interface between a CAN controller and the differential CAN_H and CAN_L conductors. Its SIC implementation can improve signal quality without requiring the surrounding CAN protocol stack or application software to be redesigned. For PCB implementation, use the package-specific pin configuration and land pattern from the NXP data sheet, place the required supply and decoupling capacitors close to their assigned pins, and route CAN_H and CAN_L as a controlled-impedance differential pair. Keep the bus and transceiver connection away from sources of high-energy interference, and review termination, common-mode behavior, and standby-control requirements at the system level. This page consolidates the manufacturer’s CAN SIC, ISO 11898-2:2024, 8 Mbit/s, Standby-mode, and package information into an application-focused engineering reference. It also organizes drop-in family alternatives and implementation guidance that support faster component selection, PCB planning, and CAN network upgrade decisions.

RFQ צור קשר
TJA1463AT/0Z - 8Mbit/s CAN SIC Transceiver | NXP
TJA1463AT/0Z

TJA1463AT/0Z - 8Mbit/s CAN SIC Transceiver | NXP

The NXP TJA1463AT/0Z is an automotive CAN Signal Improvement Capability transceiver with Sleep mode, a 4.5 V to 5.5 V supply range, and support for CAN FD communication up to 8 Mbit/s. It is supplied in a 14-pin SO package and provides VIO, STB, and ERR functions for modern vehicle network interfaces. A CAN transceiver is the physical-layer interface between a controller and a CAN bus. It converts logic-level TXD and RXD signals into balanced differential CANH and CANL bus signals, while also supporting bus-fault detection, error indication, standby control, and low-power operation. The TJA1463 belongs to the interface IC hierarchy, connecting automotive CAN controllers to CAN, CAN FD, and CAN FD with CAN Signal Improvement Capability networks. The TJA1463 implements CAN Signal Improvement Capability according to ISO 11898-2:2024 parameter set C. This capability reduces signal ringing, improves communication reliability in larger network topologies, and provides tighter bit-timing symmetry than conventional high-speed CAN transceivers. Its 8 Mbit/s CAN FD capability makes it suitable for distributed automotive control systems that carry payloads faster than Classical CAN. The TJA1463 is designed as a straightforward replacement for high-speed Classical CAN and CAN FD transceivers such as the TJA1043 and TJA1443. NXP identifies pin compatibility and retrofit capability as key benefits, allowing existing hardware and software architectures to be retained. A VIO-level interface supports flexible digital-voltage interfacing, while STB provides standby control and Sleep mode reduces power demand when the network is inactive. Typical uses include electric-vehicle powertrain controllers, body and comfort modules, battery-management systems, charging interfaces, gateway controllers, and other ECUs connected to 500-kbit/s or faster CAN FD backbones. The combination of 8 Mbit/s operation, ISO 11898-2:2024 SIC behavior, and a 14-pin SO footprint supports both new designs and targeted network upgrades. Designers should follow the manufacturer’s recommended CAN bus decoupling and connector-layout guidance, provide the specified VCC and VIO levels, and validate termination, stub length, and loop delay in the complete network. Standby and sleep-state transitions should also be checked against the ECU wake-up strategy to prevent unwanted bus-state transitions. This product overview combines the manufacturer’s CAN SIC capabilities, retrofit positioning, package details, and search-driven engineering questions with practical guidance for firmware integration, network layout, and drop-in replacement decisions.

RFQ צור קשר
TJA1463ATK/0 - 8 Mbit/s CAN SIC Transceiver | NXP
TJA1463ATK/0

TJA1463ATK/0 - 8 Mbit/s CAN SIC Transceiver | NXP

NXP Semiconductors TJA1463ATK/0 is an automotive CAN FD signal-improvement transceiver with Sleep mode, supporting reliable CAN FD communication up to 8 Mbit/s. The device implements CAN Signal Improvement Capability as defined in ISO 11898-2:2024 parameter set C and is supplied in an 8-terminal HVSON surface-mount package. A CAN transceiver is the physical-layer interface between a host controller and a CAN bus. It converts logic-level TXD and RXD signals into differential bus voltages and back again while providing bus protection, dominant-state detection, and low-power operating features. The TJA1463 family belongs to the broader controller area network transceiver, CAN interface IC, and automotive interface semiconductor categories. The principal advantage of the TJA1463ATK/0 is CAN SIC, which reduces signal ringing and permits reliable operation in larger network topologies. Its tighter bit-timing symmetry also supports CAN FD data rates up to 8 Mbit/s. A Sleep mode helps reduce current consumption when the node is not communicating, making the device suitable for distributed automotive and industrial CAN FD systems. NXP positions the TJA1463 as a pin-compatible replacement for conventional high-speed CAN transceivers while maintaining backward compatibility. It is designed for automotive applications that require high-speed CAN FD links, including body and chassis electronics, powertrain-related control modules, comfort systems, and distributed vehicle networks. The 8-terminal HVSON package supports compact surface-mount PCB layouts. Engineers should verify the exact pin assignment, transceiver mode configuration, termination requirements, VIO range, and sleep-mode behavior against the manufacturer datasheet before layout release. CAN bus wiring also requires correct differential routing, controlled return-path geometry, suitable protection, and compliance with the selected ISO 11898 network configuration. This page combines the manufacturer datasheet information, manufacturer product-page status, interface-family cross references, and practical application guidance to support component selection, PCB planning, and drop-in replacement assessment.

RFQ צור קשר
TJA1463ATK/0Z - CAN SIC Transceiver, 8Mbit/s, Sleep | NXP
TJA1463ATK/0Z

TJA1463ATK/0Z - CAN SIC Transceiver, 8Mbit/s, Sleep | NXP

The NXP Semiconductors TJA1463ATK/0Z is a CAN Signal Improvement Capability (SIC) transceiver with Sleep mode, supporting CAN FD communication up to 8 Mbit/s and housed in a 14-pin HVSON (SOT1086-1) package. It implements the SIC behavior defined in CiA 601-4 and ISO 11898-2:2024 parameter set C, while remaining fully interoperable with classical CAN and CAN FD nodes defined by ISO 11898-2:2024 and SAE J2284-1 through J2284-5. The /0Z suffix denotes the tape-and-reel, 100% matte-tin lead-free, Pb-free, AEC-Q100-qualified automotive-grade ordering code. A CAN SIC (CAN Signal Improvement Capability) transceiver is a physical-layer device that sits between a CAN protocol controller and the differential CAN bus, translating the controller's TX/RX logic into the bus's dominant/recessive differential signaling. The "signal improvement" function actively damps the dominant-to-recessive edge ringing that traditionally limits CAN FD bus length and stub density, allowing larger topologies than classical HS-CAN. In the system hierarchy it belongs to: CAN transceiver -> network interface IC -> interface IC -> integrated circuit -> semiconductor. Key features include up to 8 Mbit/s CAN FD data rate, tight bit-timing symmetry enabling communication at 5 Mbit/s with a higher node count, an integrated low-power Sleep mode with remote wake-up via bus activity, a separate VIO supply pin for flexible MCU interfacing from 1.8V to 5V, an STB (standby) mode pin, and an ERR output pin that flags local and global bus failures. The HVSON-14 package provides a small PCB footprint with a thermal pad for improved dissipation in ECU environments. Architecturally the TJA1463ATK/0Z combines a high-speed differential bus driver/receiver pair, an internal slope-control/SIC current-shaping network, a low-drop VIO level shifter, a low-quiescent Sleep regulator with bus-wake comparator, and ESD protection rated to IEC 61000-4-2 on the bus pins. The SIC behavior is achieved without external components - just the standard CAN bus termination and a 5V or 3.3V VCC. Typical applications include automotive body controllers, ADAS sensor nodes (radar, lidar, camera ECUs), chassis and powertrain ECUs, battery management systems (BMS) and battery energy storage system (BESS) communication links, industrial CAN FD backbones, and any classical-CAN network that is being migrated to CAN FD with longer cables or more nodes than the legacy bus can support. When designing with this part, ensure VIO matches the host MCU supply, place the bus termination (typically 120 ohm at each bus end) within the recommended layout, and follow NXP's EMC and ESD layout guidance in the application notes. The Sleep pin and the VIO domain must be sequenced correctly to enter and exit Sleep cleanly. This page synthesizes distributor pricing, AEC-Q100 compliance status, drop-in pin-compatible alternatives in the TJA146x family, and practical CAN SIC design notes not consolidated in the manufacturer datasheet.

RFQ צור קשר
TJF1051T/3/1 - High-Speed CAN Transceiver SOIC-8 | NXP
TJF1051T/3/1

TJF1051T/3/1 - High-Speed CAN Transceiver SOIC-8 | NXP

The NXP TJF1051T/3/1 is a high-speed Controller Area Network (CAN) transceiver that serves as the physical interface between a CAN protocol controller and the differential CAN bus, supplied in an 8-pin SOIC package. It supports CAN data rates up to 1 Mbit/s (classical CAN) and the CAN FD (Flexible Data-rate) extension at higher bus speeds, with versions tailored to common microcontroller I/O voltages. The /3 suffix denotes a 5 V MCU interface variant where VIO is internally tied to VCC, so TXD/RXD logic levels are compatible with 5 V microcontrollers directly. A CAN transceiver is a physical-layer (PHY) device that converts digital logic from a microcontroller into the differential dominant/recessive signaling required by the ISO 11898 CAN bus standard. Inside the broader product taxonomy it sits beneath CAN interface ICs -> network interface ICs -> interface ICs -> integrated circuits. The TJF1051T belongs to NXP's family of third-generation high-speed CAN transceivers designed to replace the legacy TJA1051/PCA82C250/IFX1051LE predecessors while delivering enhanced electromagnetic compatibility and electrostatic discharge immunity. Key features of the TJF1051T/3/1 include improved EMC/ESD performance compared with earlier generations, ideal passive behavior on the CAN bus when supply voltage is removed (zero load with VCC = 0 V so the bus is not biased by the node), an S (Silent) pin for low-power listen-only mode, and bus-fault protection against automotive transients per ISO 7637. The differential bus pins (CANH, CANL) tolerate typical automotive battery and jump-start voltages present on 12 V systems. Internal architecture combines a high-speed differential driver/receiver pair with thermal shutdown, under-voltage detection on VCC/VIO, bus-dominant time-out protection, and an unpowered node detection that keeps the bus in recessive when the IC is off. Together these blocks implement the CAN physical layer defined in ISO 11898-2:2003, ISO 11898-5:2007 and the pending updated ISO 11898-2:2016 release, including the CAN FD frame format. Typical applications include body-control modules, powertrain networks, electric vehicle battery management (BMS) slave nodes, industrial CANopen and DeviceNet nodes, onboard chargers, and CAN-to-UART bridges for diagnostics. The /3 variant is the right choice when pairing with a 5 V microcontroller, while the non-/3 variant supports a separate VIO rail for 3.3 V MCUs. The TJF1051T/3/1 was developed as a pin-compatible, functionally equivalent upgrade for the TJA1051T/3 in existing automotive CAN networks, allowing reuse of proven PCB footprints. When designing, ensure the bus-termination topology and stub lengths follow ISO 11898-2 to maximize signal integrity at 1 Mbit/s and beyond. The Silent pin enables low-current standby and is required for partial-networking sleep modes. This page synthesizes NXP manufacturer specifications, distributor pricing tiers, cross-brand drop-in alternatives (TCAN1051, MCP2562FD, NCV7342), and practical PCB layout notes - content not compiled on the manufacturer product page alone.

RFQ צור קשר
TJF1051T/3/1J - High-Speed CAN Transceiver, SO-8 | NXP
TJF1051T/3/1J

TJF1051T/3/1J - High-Speed CAN Transceiver, SO-8 | NXP

The NXP TJF1051T/3/1J is a high-speed Controller Area Network (CAN) transceiver providing the physical interface between a CAN protocol controller and the differential two-wire CAN bus, packaged in an 8-pin SO (SOIC-8) surface-mount package. It supports data rates up to 5 Mbit/s and implements the CAN physical layer defined by ISO 11898-2:2003, ISO 11898-5:2007, and the pending ISO 11898-2:2016 update. A CAN transceiver is the analog front-end that converts the digital TXD/RXD logic levels of a microcontroller into the differential dominant/recessive signalling required on the CAN bus, while also providing ESD protection, bus fault tolerance, and common-mode rejection. The TJF1051T/3 family adds a VIO level-adapter supply pin that allows direct interfacing to microcontrollers with supply voltages from 3V to 5V, simplifying mixed-voltage designs where the MCU runs at 3.3V but the bus nodes may operate at 5V. Key features include an extremely low ElectroMagnetic Emission (EME) due to built-in slope control on the CANH/CANL outputs, a Silent mode (S) input for low-power bus monitoring without disturbing traffic, and high immunity to ElectroMagnetic Interference (EMI) on the bus lines. The device also includes thermal shutdown, bus dominant time-out protection, and an undervoltage detector on VCC and VIO, ensuring robust behaviour on harsh automotive or industrial bus networks. It is the pin-compatible successor to the TJA1051 with improved EMC behaviour and tighter parametric compliance with the ISO 11898-2:2016 specification. Typical applications include automotive body and chassis CAN nodes, industrial CANopen networks, building automation, and any MCU-to-CAN-bus interface requiring 3.3V or 5V logic compatibility with low EME and high EMI immunity. Compared with older TJA1050/TJA1040 designs, the TJF1051T/3 provides substantially reduced electromagnetic emissions, removing the need for external common-mode chokes in many layouts. When designing with this part, place the VIO decoupling capacitor as close as possible to pin 5 and ensure both VCC and VIO are present before TXD transitions are applied. The Silent mode pin must be tied LOW for normal operation or driven by the MCU when bus diagnostics or low-power standby states are required. The /1 JTR suffix indicates 2500-piece reel packaging.

RFQ צור קשר
TJF1052IT - Galvanically Isolated High-Speed CAN Transceiver | NXP
TJF1052IT

TJF1052IT - Galvanically Isolated High-Speed CAN Transceiver | NXP

The NXP Semiconductors TJF1052IT is a galvanically isolated high-speed CAN transceiver that provides an isolated interface between a Controller Area Network (CAN) protocol controller and the physical two-wire CAN bus, delivered in a 16-pin SOIC package with 1 kV / 2.5 kVrms integrated isolation and 2 Mbps data rate support. According to NXP's product page, this part is specifically targeted at industrial applications where galvanic isolation barriers are required, eliminating the need for a separate digital isolator plus isolated DC-DC bias supply. A CAN transceiver is a physical-layer device that converts digital transmit/receive logic from a CAN controller into the differential voltage signaling required by the ISO 11898-2 CAN bus standard, and vice versa. The TJF1052IT integrates the transceiver with on-chip galvanic isolation, placing it in the hierarchy: physical-layer transceiver -> automotive/industrial bus interface -> CAN interface IC -> Interface IC. Integrated isolation removes the need for external optocouplers, isolation transformers, or digital isolator ICs, simplifying PCB layout and reducing BOM count in industrial CAN nodes. Key features include 2 Mbps CAN FD data rate support, 1 kVrms (variant /1Y) or 2500 Vrms (variant /2Y) isolation withstand voltage, 20 kV/us common-mode transient immunity (CMTI), and integrated isolated DC-DC bias supply so the bus-side node can be fully floating. Variants such as TJF1052IT/1Y, TJF1052IT/2Y, and TJF1052IT/5Y differ primarily in isolation voltage rating, with the /5Y variant qualified for functional safety contexts. The 16-SOIC wide-body (7.50 mm) package provides the clearance and creepage distances needed to meet reinforced insulation requirements. Typical applications include isolated industrial CAN nodes (PROFIBUS-style networks), PLCs, battery management systems, solar inverters, and any industrial control bus where the node must float at high common-mode voltage relative to the host. The device operates from a single 3.3 V or 5 V supply on the logic side and includes thermal shutdown, bus dominant time-out, and TXD/RXD logic pins compatible with standard CAN controllers. When designing with this part, ensure that the wide-body SOIC creepage/clearance around the package meets the end-equipment's pollution degree and over-voltage category. Designers do not need an external isolated bias supply, but should still include proper PCB edge plating and slot routing to preserve the integrated isolation rating. Use NXP's application note on isolated CAN node design for layout guidance.

RFQ צור קשר
TJF1052IT/1Y - Isolated High-Speed CAN Transceiver | NXP | 16-SOIC
TJF1052IT/1Y

TJF1052IT/1Y - Isolated High-Speed CAN Transceiver | NXP | 16-SOIC

The NXP TJF1052IT/1Y is a galvanically isolated high-speed CAN (Controller Area Network) transceiver housed in a 16-pin SOIC wide-body (7.50 mm width) package. Per the NXP datasheet, it provides 1000 Vrms of galvanic isolation between a CAN protocol controller and the physical two-wire CAN bus, delivering 2 Mbps data rate capability with 20 kV/µs common-mode transient immunity (CMTI). The device integrates NXP's proprietary isolation technology with the proven TJA1052 CAN physical layer, eliminating the need for a separate digital isolator and isolated DC-DC power supply on the bus side. A CAN transceiver (also called a CAN PHY) is the physical-layer interface between a CAN protocol controller and the differential CAN bus. In industrial systems, galvanic isolation between the low-voltage controller domain and the high-voltage bus domain protects sensitive microcontrollers from ground loops, surge events, and high common-mode voltages. The TJF1052i family extends the standard CAN transceiver by embedding this isolation barrier inside the IC, simplifying PCB layout and reducing BOM count compared to discrete isolator-plus-transceiver designs. Key features include integrated 1 kVrms isolation, 2 Mbps CAN FD (Flexible Data-rate) capability, low loop delay suitable for CAN FD frames, thermal protection, bus-dominant time-out, and a silent mode for selective wake-up. The device supports the ISO 11898-2 physical-layer standard and is specifically targeted at industrial automation, energy distribution, and medical equipment applications where reinforced isolation is mandatory. Internally, the TJF1052i combines a capacitive- or transformer-based isolation barrier with a CAN transceiver core on a single silicon die. The wide-body SOIC package provides the required creepage and clearance distances for 1 kVrms isolation, while the exposed pad aids thermal dissipation during sustained bus transmission. The result is a CAN transceiver that satisfies both functional isolation and basic insulation requirements in a single chip. Typical applications include industrial PLC communication modules, grid-tied smart-meter networking, photovoltaic inverter CAN buses, battery management system (BMS) communication links, electric-vehicle charging-station controllers, and isolated sensor networks in process automation. Designers reach for the TJF1052i when they need CAN connectivity in a high-voltage environment without the complexity of a multi-chip isolated solution. When designing with this part, mind the wide-body 7.50 mm SOIC footprint - it is wider than a standard 150-mil SOIC, so PCB land pattern and creepage must accommodate it. Also confirm that the upstream 5 V or 3.3 V controller rail is well decoupled; the isolated bus side derives its own internal supply through the on-chip isolation transformer/charge pump, so no external isolated supply is required.

RFQ צור קשר
TJF1052IT/5Y - Isolated CAN Transceiver 2Mbps 5kV | NXP
TJF1052IT/5Y

TJF1052IT/5Y - Isolated CAN Transceiver 2Mbps 5kV | NXP

The NXP TJF1052IT/5Y is a galvanically isolated high-speed CAN (Controller Area Network) transceiver delivering 2 Mbps data rate across a 5000 Vrms isolation barrier in a 16-pin SOIC (7.50 mm) package. It integrates a CAN protocol controller interface, isolated power, and isolated bidirectional logic signals in a single IC, eliminating the need for external digital isolators, isolated DC-DC converters, and discrete CAN transceivers on the same PCB. An isolated CAN transceiver is a device that bridges a host microcontroller's CAN protocol controller to the physical two-wire differential CAN bus while maintaining galvanic isolation (no direct electrical connection) between the high-voltage bus side and the low-voltage logic side. This category sits within the broader hierarchy of CAN transceivers -> automotive/industrial bus transceivers -> interface ICs -> wired communication ICs. Galvanic isolation is required for safety, ground-loop elimination, and noise immunity when the bus operates at high common-mode voltages relative to the host controller. Key features of the TJF1052IT/5Y include 20 kV/us common-mode transient immunity (CMTI), integrated DC-DC isolation power, ±58 V bus fault protection, and thermal shutdown. The device supports the ISO 11898-2 standard CAN physical layer and is compatible with both classic CAN and CAN FD (Flexible Data-rate) frames up to 2 Mbps. Power dissipation is bounded by the SOIC-16W package's thermal resistance, making it suitable for industrial automation nodes and battery management system peripherals. Architecturally, the TJF1052IT/5Y combines an on-chip coreless-transformer isolation barrier, an isolated CAN physical layer, and a fully integrated isolated power supply. This single-chip integration replaces the typical 3-chip solution (CAN transceiver + digital isolator + isolated DC-DC), reducing BOM count, PCB area, and design complexity while improving reliability through fewer solder joints. Typical applications include industrial automation PLC fieldbus nodes, solar inverter CAN interfaces, battery management system (BMS) slave modules in e-mobility, and railway signaling where reinforced isolation is mandatory. The wide bus fault tolerance also makes it suitable for 24 V truck and 48 V mild-hybrid automotive environments. When designing with this device, note that the integrated isolation removes the requirement for optocouplers, but the PCB layout must still preserve the 5 kV creepage and clearance at the package level. Decoupling capacitors close to the VCC pins on both sides of the isolation barrier are critical for stable CAN signal integrity. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet. Engineers comparing isolated CAN transceivers will find cross-reference data, parametric tables, and design guidance consolidated for accelerated part selection and PCB reuse.

RFQ צור קשר
TL072CDR - Dual Low-Noise JFET Op Amp | Texas Instruments
TL072CDR

TL072CDR - Dual Low-Noise JFET Op Amp | Texas Instruments

The Texas Instruments TL072CDR is a dual, low-noise JFET-input operational amplifier with two amplifiers in an 8-pin SOIC package. Verified distributor data identifies a 3 MHz gain-bandwidth product, 13 V/µs slew rate, and a 7 V to 36 V listed supply range. Its JFET input stage supports high input impedance and low input bias current, making the TL072CDR suitable for audio, instrumentation, filtering, and signal-conditioning circuits. The device also provides internal frequency compensation, output short-circuit protection, and latch-up-free operation. A JFET-input operational amplifier is an analog amplifier whose input stage uses junction field-effect transistors. Compared with a bipolar-input amplifier, the JFET stage generally provides lower input bias current and higher input resistance, while retaining useful low-noise performance. In system terms, the TL072 belongs to the operational-amplifier hierarchy within analog and mixed-signal semiconductors. Two amplifiers in one package reduce board area for stereo audio, balanced signal paths, active filters, and instrumentation signal chains. The verified product results specifically highlight low-noise JFET inputs, low total harmonic distortion, high input impedance, and high slew rate. These characteristics are useful in audio preamplifiers, microphone stages, sensor amplifiers, and active filters where the amplifier must preserve small signals without excessive input loading. The 3 MHz bandwidth supports applications up to moderate signal frequencies, while the 13 V/µs slew rate helps preserve large-signal waveform shape. Exact noise, offset, common-mode rejection, supply-current, and output-swing values were not supplied in the verified excerpts and are therefore marked for data completion rather than inferred. The TL072CDR is packaged in SOIC-8 and is ordered in a tape-and-reel commercial suffix arrangement identified by the exact MPN TL072CDR. Its two-amplifier architecture is useful when a design requires matched-channel placement or duplicate gain stages. Because it is not a rail-to-rail precision amplifier, the supply voltage and input/output signal limits must be checked against the manufacturer datasheet before use in modern low-voltage systems. Typical applications include stereo audio preamplification, microphone and instrument signal conditioning, active low-pass or band-pass filters, analog sensor interfaces, and general dual-amplifier utility circuits. Compared with a higher-performance precision audio amplifier, the TL072 offers a conventional general-purpose solution with JFET inputs and a familiar SOIC footprint. Its low-noise and high-slew-rate characteristics make it appropriate for cost-sensitive audio designs where the circuit does not require rail-to-rail operation or very low offset voltage. Designers should use the manufacturer datasheet for the complete electrical limits and pin configuration. Decoupling capacitors should be placed close to the supply pins, and the unused amplifier channel must be configured according to the datasheet rather than left floating. This page combines verified distributor specifications, source-linked product information, and practical design context for engineers evaluating the TL072CDR.

RFQ צור קשר