מוצרים (44,000+)

W77L516A25FL - 25MHz 64KB 8051 MCU | Nuvoton | Embedded Control
W77L516A25FL

W77L516A25FL - 25MHz 64KB 8051 MCU | Nuvoton | Embedded Control

The Nuvoton Technology Corporation W77L516A25FL is an 8-bit W77 8051-compatible microcontroller operating at 25 MHz, with 64 KB of built-in Flash program memory and 1 KB of internal RAM. The device is packaged in a 44-pin BQFP package measuring 10 mm by 10 mm and provides 36 general-purpose I/O pins for embedded control systems. An 8051 microcontroller is a compact CISC-based control processor that integrates CPU registers, program memory, data memory, and peripherals into one device. Its place in the product hierarchy is microcontroller → embedded processor → programmable controller → semiconductor. The W77L516A25FL combines the widely established 8051 instruction set with on-chip Flash, making it suitable for products that benefit from legacy 8051 code compatibility while requiring a modern nonvolatile program-memory implementation. Key features include a 25 MHz operating speed, 64 KB of Flash organized as 64K x 8, 1 KB of SRAM organized as 1K x 8, and 36 I/O lines. The operating-voltage listing spans 2.7 V to 5.5 V, while another technical listing identifies 4.5 V as a relevant operating-voltage value. The device also includes an internal oscillator according to the component specifications. These characteristics position it for compact embedded controllers, industrial automation modules, and cost-sensitive control products with moderate processing requirements. The W77L516A25FL belongs to Nuvoton's W77 series and retains an 8-bit MCU architecture rather than using a 32-bit core. Flash memory allows firmware to be stored without an external program-memory device, reducing the component count in a finished controller. The 36 available I/O pins provide substantial interface capacity for digital inputs, outputs, indicators, and external control signals, although the exact peripheral multiplexing must be assigned from the manufacturer pin-description table. Typical application areas include industrial equipment interfaces, data-collection terminals, programmable control panels, building automation equipment, and compact embedded control modules. A 25 MHz clock provides useful processing headroom for 8051-based supervisory tasks, state machines, communication routines, and peripheral coordination. The 44-pin package also leaves a broader interface budget than many smaller microcontroller packages while remaining compact enough for embedded boards. When laying out a W77L516A25FL board, begin with the manufacturer pin-description table and assign every power, ground, reset, clock, and I/O connection explicitly. Confirm the operating rail required by the selected design, decouple each supply connection locally, and route oscillator and sensitive signals away from high-current switching nodes. The 8051 architecture is mature, but firmware timing, peripheral selection, and pin multiplexing must still be checked against the device documentation. This product page consolidates the core electrical specifications, package information, sourcing details, application guidance, and engineering considerations into a concise engineering reference. It is intended to help designers identify whether the W77L516A25FL's Flash memory, 25 MHz speed, 36 I/O pins, 44-pin BQFP package, and 8051 compatibility fit an embedded-control design.

RFQ צור קשר
W77L516A25PL - 25MHz 8-Bit 8051 MCU, 64KB Flash | Nuvoton
W77L516A25PL

W77L516A25PL - 25MHz 8-Bit 8051 MCU, 64KB Flash | Nuvoton

The Nuvoton Technology Corporation W77L516A25PL is an 8-bit 8051-compatible microcontroller operating at 25 MHz, with 64 KB of flash program memory, 1 KB of RAM, and 36 I/O lines in a 44-pin PLCC package. It combines the familiar 8052 instruction set with a redesigned processor core that executes instructions approximately 1.5 to 3 times faster than a traditional 8051 at the same clock frequency. The W77L516A25PL is designed for embedded-control applications requiring deterministic serial communication, timer resources, parallel I/O, and programmable flash storage. An 8-bit microcontroller is a compact processor intended to control embedded systems rather than execute a desktop operating system. Within the semiconductor hierarchy, the W77L516A25PL belongs to the 8051-compatible microcontroller class and retains the standard 8052 peripheral model, including four 8-bit I/O ports, three 16-bit timer/counters, a full-duplex serial port, and interrupt resources. Its instruction-set compatibility allows legacy 8051-oriented code and development practices to be retained during product modernization. The principal device characteristics include 64 KB of flash program memory, 1 KB of on-chip RAM, 36 I/O pins, and a 25 MHz operating frequency. Additional integrated resources identified for this device include a serial port, power-on reset, and a watchdog timer. The redesigned core removes wasted clock and memory cycles, so software timing can improve without changing the external clock speed. Flash memory also provides a more flexible program-storage medium than mask-programmed or one-time-programmable microcontroller implementations. The 44-pin PLCC package provides a leaded, socket-compatible format suited to controllers, interface modules, industrial control boards, and legacy system upgrades. Its pin-compatible 8052 heritage simplifies board-level continuity when a design moves from a conventional 8051-class controller to this faster implementation. Designers should still validate the clock configuration, peripheral allocation, reset behavior, and memory map in the target system rather than assuming every legacy peripheral behaves identically. Typical uses include industrial equipment interfaces, serial protocol bridges, data acquisition modules, appliance controllers, embedded instrumentation, and communication adapters. The combination of four parallel I/O ports, three timers, serial communications, and 36 I/O lines is especially useful for systems that must connect switches, sensors, displays, relays, and legacy peripherals while maintaining predictable control timing. The principal design consideration is preserving compatibility at both software and board level. Confirm that the chosen oscillator and reset circuit meet the datasheet requirements, allocate every pin according to the manufacturer's pin description, and include adequate decoupling. Because this is a legacy-compatible 8-bit architecture, migration planning should also include confirmation of compiler support, bootloader behavior, peripheral register mapping, and any source-code changes required for the faster core. This page combines the manufacturer's device data with practical selection guidance, application context, package information, and verified sourcing links. It is intended to help engineers determine whether the W77L516A25PL fits an existing embedded-control design and how to evaluate compatible W77-family options without overlooking memory, timing, package, or toolchain requirements.

RFQ צור קשר
W77L532A25DL - 25MHz 8051 128KB Flash | Nuvoton
W77L532A25DL

W77L532A25DL - 25MHz 8051 128KB Flash | Nuvoton

The Nuvoton Technology Corporation W77L532A25DL is an 8-bit 8051-compatible microcontroller with 128KB of program Flash memory, 1K x 8 RAM, 32 general-purpose I/O pins, and a 25MHz operating frequency in a 40-pin DIP package. It combines the familiar 8051 programming model with a redesigned processor core intended to reduce wasted instruction cycles. An 8051-compatible microcontroller is an embedded-control device built around the classic 8051 instruction set architecture. It combines a CPU core, program memory, data memory, serial and parallel I/O, timers, interrupt control, and other peripherals on one integrated circuit. This hierarchy places the W77L532 within the microcontroller, embedded processor, and semiconductor categories used for industrial controls, communications equipment, and compact control systems. The W77L532A25DL's principal specifications include 128KB (128K x 8) of Flash program memory, 1K x 8 of RAM, 32 I/O lines, and a 25MHz clock rate. Its redesigned core is described as executing 8051 instructions approximately 1.5 to 3 times faster than a traditional 8051 at the same crystal frequency, depending on the instruction type. This provides meaningful performance improvement without changing the established 8051 software environment. The W77L532 is a fast 8051-compatible microcontroller designed to retain software compatibility while improving processor efficiency. Flash memory supports in-system firmware storage and programming workflows, while the 32 available I/O lines allow the device to interface directly with sensors, switches, displays, relays, and data converters. The 25MHz operating point is suitable for embedded control tasks that require more timing margin than a lower-speed 8051 implementation while retaining legacy code compatibility. Typical applications include industrial control panels, data acquisition modules, instrumentation interfaces, serial protocol bridges, appliance controllers, and compact embedded systems. Its 32 I/O pins make it especially useful for systems that need multiple digital inputs and outputs, while 128KB of Flash provides room for application code, protocol handlers, configuration data, and boot routines. Designers should confirm oscillator, reset, and interface requirements against the manufacturer datasheet before laying out the PCB. The 40-pin DIP format simplifies prototyping and through-hole assembly, but the package occupies more board area than a comparable surface-mount controller. Firmware migration also requires attention to timing, interrupt behavior, and peripheral differences rather than assuming complete functional equivalence with every original 8051 device. This product page consolidates the confirmed memory, speed, I/O, package, and architecture characteristics into an engineering-oriented reference. It also distinguishes verified device facts from parameters that require confirmation, helping designers evaluate the W77L532A25DL for 8051-compatible embedded-control designs, sourcing decisions, and legacy board maintenance.

RFQ צור קשר
W77L532A25FL - 8-Bit 128KB Flash MCU | Nuvoton
W77L532A25FL

W77L532A25FL - 8-Bit 128KB Flash MCU | Nuvoton

The Nuvoton W77L532A25FL is an 8-bit embedded microcontroller with 128KB of Flash program memory, 36 I/O pins, and a 25 MHz maximum operating frequency. It is packaged in a 44-pin BQFP and includes an 8051 core, serial-port connectivity, a power-on reset peripheral, and a watchdog timer. The device is identified as an active part and is positioned for compact embedded-control designs that require nonvolatile firmware storage and a broad external bus interface. An 8-bit microcontroller is a semiconductor integrated circuit designed to execute embedded instructions using an 8-bit data path. The W77L532A25FL belongs to the 8051-compatible microcontroller hierarchy, combining a CPU core, Flash memory, RAM, serial communication, and dedicated system-control peripherals in one package. Its EBI/EMI interface permits connection to external memory or peripheral devices when the on-chip resources are insufficient. The principal feature set includes 128KB, or 128K × 8, of Flash program memory and 1K × 8 bytes of RAM. Its 36 available I/O lines support peripheral functions and general digital control. At up to 25 MHz, the MCU provides a defined operating speed for embedded tasks. Program-once development is supported by the Flash memory architecture, while power-on reset and watchdog-timer functions improve recovery after startup errors or unexpected program stalls. The W77L532A25FL is an 8-bit MCU rather than a high-performance 32-bit processor. Its architecture is appropriate for deterministic control tasks, data acquisition, communication bridging, keypad and display control, and compact industrial equipment. The 44-pin BQFP exposes substantially more I/O than a small lead-frame package, making external sensors, displays, relays, and memory devices easier to connect while still supporting surface-mount assembly. Typical applications include programmable control panels, instrumentation, serial-interface adapters, industrial controllers, and embedded peripheral modules. Its 36 I/O pins can distribute control signals across multiple external devices, while the EBI/EMI interface provides a route to additional bus-connected components. The serial port is useful for host communication, configuration transfer, firmware updates, or linking the controller to another embedded system. The main design consideration is power and clock planning. Engineers should use the manufacturer's oscillator and reset guidance when creating the clock network, preserve the required supply decoupling arrangement, and confirm that every signal connected to the 36 available I/O pins has a suitable input level. Firmware should also enable the watchdog timer in applications where a hung task could create unsafe equipment behavior. This product record combines the part's core embedded specifications, package information, sourcing structure, and engineering guidance in one concise reference. It supports initial design review by connecting the 8051 core, 128KB Flash memory, 1K × 8 RAM, 25 MHz speed, and 36 I/O capabilities with practical implementation considerations for reliable embedded systems.

RFQ צור קשר
W77L532A25PL - 8-Bit 25MHz 128KB Flash MCU | Nuvoton
W77L532A25PL

W77L532A25PL - 8-Bit 25MHz 128KB Flash MCU | Nuvoton

Nuvoton Technology Corporation W77L532A25PL is an 8-bit W77 8051-compatible microcontroller operating at up to 25 MHz, with 128 KB of embedded Flash program memory and 36 I/O pins in a 44-pin PLCC package. The device combines 128 KB (128K x 8) Flash memory with 1K x 8 RAM and is designed for embedded control systems that require deterministic 8-bit processing and a compact leaded package. A microcontroller is a programmable semiconductor that integrates a CPU, memory, I/O, and peripherals into one device. In the product hierarchy, the W77L532A25PL is an 8-bit MCU, part of the 8051-compatible microcontroller family, and a member of the broader embedded-processing and semiconductor categories. It is intended for control rather than general-purpose computing, making it suitable for industrial controllers, embedded instruments, data-acquisition systems, and compact automation products. The principal device characteristics are a 25 MHz maximum operating frequency, 128 KB of Flash program memory, 1K x 8 RAM, and 36 available I/O lines. Flash program memory supports firmware storage without a separate external memory device, while the 44-pin PLCC package provides a leaded, socket-compatible mechanical format for prototypes and established control-board assemblies. The component is also identified as supporting 3.3 V and 5 V operation, enabling its use in mixed-voltage embedded equipment. The W77L532A25PL uses the 8-bit W77 8051-compatible instruction set and CISC-oriented embedded-control architecture. Its 36 I/O pins provide connectivity for digital sensors, relays, displays, communication interfaces, and actuator-control signals. This combination of moderate clock speed, internal Flash, and a substantial I/O count is useful when the design requires predictable peripheral control without the complexity of a higher-performance processor. Exact peripheral allocations and electrical limits must be confirmed from the manufacturer’s pin-description table before PCB routing. Typical applications include programmable industrial controls, serial protocol bridges, relay and solenoid controllers, embedded measurement instruments, test fixtures, and legacy 8051 peripheral expansion. The 128 KB program capacity is particularly useful for firmware containing communications tables, calibration constants, diagnostics, and application-specific state machines. The 36 I/O lines can distribute control traffic across sensors and actuators while keeping the design within a single package. When integrating the controller, begin with the exact pin-description table, oscillator requirements, and recommended decoupling configuration in the manufacturer datasheet. Preserve the PLCC land pattern, observe the stated operating-voltage range, and validate unused pins according to the device documentation. Because 8051 peripherals and interrupt behavior are architecture-specific, confirm timer, serial, and interrupt resources before assigning them to time-critical functions. This product page combines the key memory, speed, I/O, and package characteristics with application guidance, pin-placement cautions, and a same-package alternative comparison. It also provides a practical sourcing path through the Request a Quote form, helping engineers evaluate whether the W77L532A25PL fits both the original PCB footprint and the required embedded-control functionality.

RFQ צור קשר
W77M032A25FL - 8-Bit 25MHz MCU, 36 I/O | Nuvoton
W77M032A25FL

W77M032A25FL - 8-Bit 25MHz MCU, 36 I/O | Nuvoton

The Nuvoton Technology Corporation W77M032A25FL is an 8-bit ROMless microcontroller operating at up to 25 MHz, with 1 KB x 8 RAM, 36 general-purpose I/O pins, and a 44-pin BQFP package. Its 36 available I/O positions make it suitable for compact embedded-control systems that need broad digital connectivity without moving to a larger mixed-signal MCU package. An 8-bit microcontroller is a compact processor designed around an 8-bit data bus and integrated memory, peripherals, and I/O. The W77M032A25FL belongs to the MCU hierarchy used for real-time control, digital interface, measurement, and automation tasks. Unlike a general-purpose processor, it is intended to execute embedded control code close to the sensors, switches, indicators, and communication interfaces connected to its pins. The device provides 1 KB x 8 of SRAM and up to 25 MHz operation. Its internal oscillator supports designs that do not require an external clock source. The 36-I/O configuration supports multiple digital inputs and outputs on a single 44-BQFP device, reducing the need for external I/O expanders in moderate-complexity control designs. The exact embedded program-memory arrangement and peripheral configuration should be confirmed in the manufacturer datasheet before final firmware and PCB design. As a ROMless MCU, application code must be loaded into external program memory rather than residing in an on-chip ROM. The system designer therefore needs to account for the external memory interface, address routing, and programming implementation in the board-level architecture. This makes the device more appropriate for designs with an established external-memory path than for cost-sensitive designs that favor integrated flash memory. Typical uses include industrial keypad and panel control, digital instrumentation, simple motor or relay sequencing, embedded timers, LED status and annunciation systems, and compact automation controllers. Its 36 I/O pins are especially useful when a design must connect multiple discrete inputs and outputs while retaining a 44-pin surface-mount footprint. The primary design consideration is firmware and memory-interface validation. Confirm the external memory requirements, reset behavior, clock configuration, programming method, and complete peripheral assignment in the manufacturer datasheet before schematic release. PCB layout should preserve short, clean routes for clock, reset, and external-memory signals while allowing adequate decoupling around the supply pins. This product page consolidates the verified device specifications, source links, application guidance, design cautions, and replacement analysis into one engineering-focused reference. It also distinguishes confirmed electrical facts from parameters that require confirmation before schematic, firmware, or PCB sign-off.

RFQ צור קשר
W78C032C40DL - 40MHz 8051 ROMless MCU | Winbond
W78C032C40DL

W78C032C40DL - 40MHz 8051 ROMless MCU | Winbond

The Winbond W78C032C40DL is an 8-bit 8051-compatible ROMless microcontroller operating up to 40 MHz in a 40-pin DIP package. It provides 256 x 8 RAM, 32 I/O pins, an internal oscillator, one UART, and an external bus interface for embedded control designs. The W78C032 uses a 12T 8051 MCU architecture and operates from 4.5 V to 5.5 V over a 0 °C to 70 °C temperature range. An 8051 microcontroller is an embedded processor family designed around a compact accumulator-based architecture, program memory, internal RAM, serial communication, and configurable digital I/O. The W78C032C40DL belongs to the W78 microcontroller family, combining the established 8051 instruction set with a higher operating speed and a conventional 40-pin through-hole footprint for industrial and legacy-compatible control systems. The main device features include a 40 MHz maximum clock speed, ROMless program-memory architecture, 256 bytes of RAM, 32 I/O lines, one UART, and an external bus interface. The DIP-40 package makes the device suitable for prototypes, controller boards, educational platforms, and equipment where socketed through-hole assembly and easy replacement are preferred. The ROMless architecture requires external program storage, allowing firmware capacity and memory technology to be selected separately. The 12T 8051 core supports compatibility with traditional 12T 8051 designs while providing a practical upgrade path for higher clock speed. The external bus interface can be used for additional memory or peripheral interfacing, while the UART provides a straightforward path for configuration, diagnostics, and host communication. Designers should use the manufacturer pin-description table and application information when assigning the 40 package pins and implementing the external memory bus. Typical applications include industrial controllers, embedded timing modules, serial data concentrators, instrumentation interfaces, educational 8051 platforms, and legacy equipment refreshes. Because the device is ROMless, it is especially useful where external Flash or EPROM storage is acceptable and provides a clear separation between the controller IC and the selected firmware memory. A key design consideration is the relationship between the 4.5 V to 5.5 V supply requirement and the external program-memory interface. The clock, reset circuitry, UART baud rate, and bus timing must all be designed around the 40 MHz operating limit and the package-specific pin assignments. Use the W78C032C40DL datasheet as the controlling reference for electrical limits, timing, memory-interface behavior, and programming guidance. This product summary combines the device identity, core architecture, memory and I/O characteristics, package format, application guidance, and sourcing considerations into a concise engineering reference. It is intended to support initial component selection, board planning, firmware architecture decisions, and replacement assessments before the complete manufacturer documentation is reviewed.

RFQ צור קשר
W78C032C40FL - 40MHz 8-Bit ROMless 8051 MCU | Nuvoton
W78C032C40FL

W78C032C40FL - 40MHz 8-Bit ROMless 8051 MCU | Nuvoton

Nuvoton Technology Corporation W78C032C40FL is an 8-bit W78-series 8051-compatible microcontroller with a 40 MHz maximum clock rating, ROMless program memory architecture, 5 V supply operation, and a 44-pin PQFP package. It is designed for embedded control systems that require a compact 8-bit CPU, external program storage, and a conventional parallel microcontroller interface. An 8051-compatible microcontroller is an embedded processing component that executes firmware from external program memory and controls peripherals through dedicated digital I/O and internal resources. The W78 family combines the widely established 8051 instruction set with an extended 8-bit architecture, positioning the device within the broader hierarchy of microcontrollers, embedded processors, and semiconductor control devices. The W78C032C40FL combines ROMless operation, 8-bit processing, a 40 MHz clock classification, and a 5 V operating supply. ROMless construction allows firmware capacity to be determined by an external program-memory device, making this configuration useful when applications require flexible code storage, in-system programming, or firmware separation. Its 44-pin package also provides a larger pin count than many compact 8-bit microcontrollers, supporting applications with more external signals. The architecture is listed as 8-bit 8051 CISC, allowing engineers to use the established W78 programming model and associated development tools. Because the MCU is ROMless, a complete board design must include suitable external program memory and the required bus interface. Clocking, reset, power, and signal conditioning should follow the detailed electrical and timing requirements in the manufacturer datasheet before schematic release. Typical uses include industrial control panels, sensor-conditioning controllers, communication interfaces, programmable logic controllers, appliance controllers, and compact embedded automation modules. The device is particularly relevant to legacy or cost-sensitive 8051 designs where retaining the W78 software ecosystem is more valuable than adopting a different instruction set or requiring a larger pin count. A key design consideration is firmware-memory integration. Confirm that the external memory address, data, and control lines can be routed without compromising timing, while preserving the required oscillator and reset behavior. Because available listing descriptions use inconsistent clock wording, the highest operating frequency and oscillator configuration should be verified against the manufacturer datasheet before the device is specified for timing-critical operation. This page consolidates the documented device identity, package information, sourcing guidance, and engineering considerations into a compact selection reference. It also distinguishes verified manufacturer information from unresolved details, helping engineers identify what must be confirmed before schematic, firmware, and PCB-layout commitments are finalized.

RFQ צור קשר
W78C032C40PL - 40MHz ROMless 8051 MCU | Nuvoton
W78C032C40PL

W78C032C40PL - 40MHz ROMless 8051 MCU | Nuvoton

Nuvoton W78C032C40PL is an 8-bit W78 8051-compatible microcontroller operating up to 40 MHz with a 4.5 V to 5.5 V supply range. The device is ROMless, provides 256 x 8 bits of data RAM, and offers 32 general-purpose input/output pins in a 44-pin PLCC package. A microcontroller is a programmable semiconductor that combines a CPU core, memory, input/output ports, and peripheral functions on one integrated circuit. The W78 belongs to the 8051 microcomputer hierarchy, where a small instruction set and dedicated I/O ports provide a practical platform for embedded control. A ROMless configuration requires an external program-memory device, making the MCU suitable for systems where firmware storage is implemented separately from the controller. Principal characteristics include a maximum operating frequency of 40 MHz, an internal oscillator, 32 I/O pins, 256 bytes of data RAM, and a 4.5 V to 5.5 V operating supply range. Its 44-pin PLCC package provides a leaded, surface-mount form factor with J-leads. The Pb-free marking identifies the component as intended for lead-free manufacturing environments, although broader environmental and automotive qualifications should be confirmed separately. The 8-bit architecture is optimized for compact embedded-control logic rather than high-throughput computing. With 32 I/O pins, an external ROM interface, and 256 bytes of internal RAM, the W78C032C40PL can support digital monitoring, sequential logic, human-interface control, and simple peripheral-control functions. Designers should account for the limited RAM when sizing buffers and selecting between direct RAM variables, external data memory, and peripheral registers. Typical applications include industrial control panels, programmable logic controllers, instrumentation, appliance controllers, data-acquisition front ends, and embedded systems that already use the W78 or 8051 instruction set. The 40 MHz clock capability provides additional timing margin for interrupt-driven control loops, while the external program-memory architecture permits firmware capacity to scale independently from the MCU. A critical design consideration is that the controller requires external program memory because it is ROMless. The memory interface, address decoding, reset behavior, oscillator configuration, and bypass components should therefore be implemented according to the manufacturer datasheet. PLCC assembly also requires inspection for solder-joint formation, pin-1 orientation, and adequate board-level clearance around the J-leads. This product page consolidates the core electrical characteristics, replacement candidates, package information, and design considerations needed to evaluate the W78C032C40PL for an existing 8051-compatible embedded-control platform.

RFQ צור קשר
W78C438C40FL - 40MHz 8-Bit ROMless MCU | Nuvoton | 100-QFP
W78C438C40FL

W78C438C40FL - 40MHz 8-Bit ROMless MCU | Nuvoton | 100-QFP

Nuvoton Technology Corporation W78C438C40FL is a 40 MHz, 8-bit, ROMless CMOS microcontroller with 40 I/O lines, a 100-QFP package, and a 4.5 V to 5.5 V supply range. Designed as a derivative of the W78C58 microcontroller family, it provides external program-memory addressing and substantial peripheral integration for embedded control systems. The W78C438C is functionally compatible with the W78C32 while extending its memory and I/O capabilities. An 8051-family microcontroller is an embedded-processing device built around a compact 8-bit CPU, program and data memory interfaces, timers, serial communication blocks, and general-purpose I/O. Within the product hierarchy, the W78C438C40FL is an 8-bit microcontroller, an embedded processor, and a system-on-chip platform designed for deterministic control tasks. Its ROMless architecture allows the application program to reside in external memory while the microcontroller executes code and manages peripheral activity. The device operates at up to 40 MHz and provides five general-purpose I/O ports totaling 40 I/O lines according to the manufacturer datasheet. It supports 256 bytes of 8-bit RAM and can use a 64 KB program-memory and 1 MB data-memory addressing arrangement, or memory-mapped chip-select logic. The 4.5 V to 5.5 V operating range supports conventional 5 V industrial and embedded equipment. An external oscillator provides clocking flexibility when the system requires a specific timing source. The W78C438C architecture extends the classic 8051 design with memory-mapped external interfaces and four external interrupts. Its 40 MHz operating capability allows more frequent interrupt servicing and peripheral transfers than lower-speed 8-bit implementations. Because program memory is external, board-level design must account carefully for address decoding, bus timing, access control, and the electrical characteristics of the selected memory devices. The 100-QFP package exposes substantially more interface signals than smaller 8-bit controller packages. Typical applications include industrial automation controllers, data-acquisition and I/O-expansion systems, embedded communication equipment, industrial instrumentation, legacy 8051 peripheral controllers, and custom control platforms requiring external program storage. Its five ports make it useful where numerous digital lines must connect to sensors, relays, displays, memory devices, and bus transceivers. A functional-compatible 8051 software base can also simplify migration from established controller designs. For a new board, verify external memory address decoding and interrupt-priority assignments before committing the layout. Keep high-current bus and output-driver traces separate where practical, provide local bypass capacitance at the supply pins, and confirm all external signals against the pin-description table in the manufacturer datasheet. The W78C438C40FL is also identified as an active lifecycle part, making it appropriate for both new designs and maintenance of existing 8051-based platforms. This page consolidates the core electrical, memory, package, and lifecycle characteristics of the W78C438C40FL with practical implementation guidance, application fit, comparison fields, and design checks. It focuses on decisions engineers must make when integrating a ROMless, high-speed 8-bit microcontroller into an external-memory architecture.

RFQ צור קשר
W78C438C40PL - 40MHz ROMless 8051 MCU | Nuvoton | 84-LCC
W78C438C40PL

W78C438C40PL - 40MHz ROMless 8051 MCU | Nuvoton | 84-LCC

Nuvoton Technology Corporation W78C438C40PL is an 8-bit ROMless 8051-compatible microcontroller with a maximum clock speed of 40 MHz, 40 I/O ports, and an 84-pin PLCC package. It operates from a 4.5 V to 5.5 V supply and includes 256 × 8 bytes of internal RAM, making it suitable for embedded control systems requiring external program memory and substantial digital I/O. An 8051-compatible microcontroller is an embedded-processing device built around the classic 8051 instruction set and peripheral architecture. Within the semiconductor hierarchy, this device belongs to the 8-bit microcontroller class, combines a CPU core with memory and I/O interfaces, and provides a programmable platform for industrial equipment, communication controllers, test systems, and legacy-compatible control products. Its 84-pin PLCC package offers many external bus and port connections for designs that exceed the pin count of smaller devices. The W78C438C40PL provides a 40 MHz maximum operating frequency, an 8-bit data bus, and four major groups of 10 I/O lines, totaling 40 I/O ports. It uses 256 bytes of RAM for variables, stack operations, and intermediate data. Because the device is ROMless, program code must be supplied through an external memory interface rather than an internal masked ROM. The 4.5 V to 5.5 V operating range supports conventional 5 V embedded systems. The W78 family architecture combines an 8051-compatible execution core with external program-memory interfacing, serial communication, and extended parallel I/O. EBI/EMI connectivity expands the design beyond the dedicated port pins, enabling access to external memory and peripheral devices. The 84-pin PLCC format supports both legacy socketed assembly workflows and surface-mount production processes, although the exact assembly method depends on board layout and manufacturing capability. Typical uses include industrial sequence controllers, communication equipment, data-acquisition systems, test and measurement instruments, embedded gateways, and legacy 8051 peripheral controllers. The 40 I/O lines are particularly useful for machines requiring multiple digital inputs and outputs, while the external memory interface accommodates larger firmware than the on-chip RAM alone can hold. The serial port supports communication with sensors, converters, and service interfaces when the surrounding firmware provides the required protocol. Designers should allocate the external program-memory bus carefully because it affects board layout, address decoding, and memory timing. Decoupling capacitors should be placed directly beside the supply pins, while exposed clock and high-speed bus routes should remain short. Firmware must also account for the device's ROMless architecture and provide a valid external code-memory interface before operation. This product page combines the exact W78C438C40PL electrical and packaging characteristics with application guidance, compatibility boundaries, and design-oriented implementation notes. It distinguishes the exact 84-LCC device from related W78C438 variants and provides a practical framework for memory interfacing, peripheral expansion, and lifecycle-aware component selection.

RFQ צור קשר
W78E051B40DL - 40MHz 8-Bit 8051 Microcontroller | Nuvoton
W78E051B40DL

W78E051B40DL - 40MHz 8-Bit 8051 Microcontroller | Nuvoton

Nuvoton Technology Corporation W78E051B40DL is an 8-bit 8051-compatible microcontroller with 4 KB of program memory, 128 bytes of RAM, 32 general-purpose I/O lines, and a 40 MHz maximum clock in a 40-DIP package. It operates from a 5 V supply and is designed for cost-sensitive embedded control applications requiring deterministic 8-bit processing, parallel digital I/O, and compact through-hole assembly. An 8051-compatible microcontroller is an embedded processing IC that executes a legacy 8051 instruction set while integrating flash program memory, static RAM, timers, serial communication, and parallel I/O. The W78E051B40DL belongs to the broader hierarchy of 8-bit microcontroller, embedded controller, integrated circuit, and semiconductor. Its standard 8051 compatibility simplifies the reuse of established instruction-level code, while flash memory permits in-circuit reprogramming and configuration flexibility. Key features include 4 KB of Flash EPROM, organized as 4K x 8, and 128 x 8 bits of RAM. Four bidirectional, bit-addressable 8-bit I/O ports provide up to 32 I/O pins. The device supports operation up to 40 MHz, enabling the processor and associated peripherals to service timing-sensitive control, communication, and data-handling tasks. Two software-selectable power-reduction modes help reduce energy use when the application does not require continuous processor activity. The W78E51B architecture is fully compatible with the standard 8051 instruction set. Idle mode stops the processor clock while allowing peripheral operation to continue, and power-down mode stops the crystal oscillator for minimum power consumption. The external clock can be stopped without affecting processor state, which can simplify sequencing and clock-control strategies in simple embedded systems. Typical applications include appliance controllers, small industrial control panels, keypad interfaces, LED indication systems, simple motor or relay controllers, and compact 8051-based instruments. Its parallel I/O is useful for discrete input sensing and output control, while its 5 V operation and 40-DIP package are well suited to through-hole educational, prototype, and legacy-control boards. When designing around the W78E051B40DL, preserve the oscillator and reset circuitry required by the selected clock architecture, and keep high-current loads away from port pins because the I/O current limits must be respected. Confirm the complete 40-pin signal map against the manufacturer datasheet before assigning board functions. Use idle mode when peripherals must continue operating but the core can pause, and use power-down mode when the lowest active-state consumption is more important than immediate restart speed. This product page combines the manufacturer-family characteristics, verified package and memory specifications, pinout-design guidance, application fit, and transparent comparison guidance. It is intended to help engineers determine whether the W78E051B40DL matches the required memory size, clock rate, package, power mode, and legacy 8051 software environment before beginning a PCB or firmware design.

RFQ צור קשר
W78E051B40FL - 40MHz 8051 MCU, 4KB Flash | Nuvoton
W78E051B40FL

W78E051B40FL - 40MHz 8051 MCU, 4KB Flash | Nuvoton

Nuvoton Technology Corporation W78E051B40FL is a general-purpose 8-bit 8051-compatible microcontroller with 4KB of Flash program memory, 128 bytes of RAM, 36 I/O lines, and a maximum clock speed of 40MHz. The device is packaged in a 44-pin plastic quad flat package, identified as 44-BQFP or 44-PQFP in component listings. An 8051 microcontroller is an embedded processing platform that combines a CPU core, program memory, data memory, parallel I/O ports, timers, serial interfaces, and interrupt-control logic on one integrated circuit. The W78E051B40FL belongs to the 8-bit microcontroller hierarchy, where its standard 8051-compatible instruction set supports compact control systems, industrial controllers, data-acquisition modules, and embedded accessories. The principal device characteristics include 4KB of Flash EPROM, 128 bytes of internal RAM, four 8-bit bidirectional and bit-addressable I/O ports, and an additional 4-bit P4 port. Two 16-bit timer/counter blocks support timing, event counting, and periodic control tasks. Its operating speed reaches 40MHz, allowing the core to execute control sequences more quickly than the lower-clock members of the same 8051 family. The W78E051B series retains compatibility with the standard 8051 instruction set while using Flash rather than a one-time-programmable architecture. That combination preserves familiar compiler and assembly-code compatibility and supports firmware updates where the system's programming process permits reprogramming. The 128-byte RAM is modest, so designs requiring substantial buffers should use external data memory and divide work between the MCU and external components. Typical uses include industrial control panels, motor and relay controllers, instrumentation interfaces, sensor hubs, programmable logic controllers, communications modules, and compact embedded products. The 36 available I/O lines make the device suitable for systems that need multiple digital inputs and outputs, while the 40MHz clock provides additional execution margin for protocol handling and coordinated peripheral activity. The main design constraint is memory capacity. Firmware must fit within the 4KB program-memory limit, and frequently used variables should remain within the 128-byte RAM space. Board designers should also preserve a defined reset and oscillator implementation, validate every port's direction and pull configuration, and confirm the exact pin assignment and electrical limits against the manufacturer datasheet before layout release. This product page consolidates the W78E051B40FL's principal specifications, lifecycle information, package characteristics, replacement constraints, comparison data, and practical design guidance. It also distinguishes verified same-footprint options from broader 8051 alternatives that require additional engineering review.

RFQ צור קשר
W78E051B40PL - 8-Bit 40MHz 8051 MCU | Nuvoton
W78E051B40PL

W78E051B40PL - 8-Bit 40MHz 8051 MCU | Nuvoton

Nuvoton Technology Corporation W78E051B40PL is an 8-bit W78 series microcontroller with 4KB (4K x 8) flash program memory, 128 x 8 RAM, 36 I/O pins, a 40MHz operating speed, and a 44-pin PLCC J-lead package. The device combines a compact 8051-compatible architecture with embedded flash memory for cost-sensitive embedded-control designs. A microcontroller is a semiconductor integrated circuit that integrates a processor core, program memory, data memory, and I/O ports into one component. It executes embedded firmware to monitor inputs and control outputs. The W78 family belongs to the broader microcontroller hierarchy, combining an 8-bit processor core with embedded flash and general-purpose I/O for compact control systems. The W78E051B40PL provides 4KB of flash program memory, 128 bytes of RAM, and 36 I/O pins. Its 40MHz maximum speed supports faster instruction execution than lower-speed members of the 8-bit MCU class. The 44-pin PLCC package provides 36 externally accessible I/O functions together with power and control connections, while its J-lead geometry supports through-hole PCB assembly. The W78E051B40PL is identified as an 8-bit W78 microcontroller with 4KB flash and 128 bytes of data memory. This combination is suitable for firmware whose code footprint fits within 4KB and whose working data requirements remain within the available 128-byte RAM. Its 36 I/O pins also provide more external signal connections than many compact 8-bit controllers. Typical uses include small industrial controllers, appliance interfaces, keyboard or panel controllers, embedded timers, simple sequencers, and compact motor or relay control systems. The 36 available I/O pins can connect sensors, indicators, switches and control logic, while the embedded flash supports self-contained firmware execution without an external program-memory device. Designers should verify oscillator, reset, programming, and clock requirements against the manufacturer datasheet before layout. Because the device is supplied in a 44-pin J-lead PLCC package, PCB hole spacing and lead orientation must match the package drawing exactly. Firmware development should also account for the limited 4KB program-memory capacity and 128-byte RAM allocation. This product page consolidates the W78E051B40PL architecture, memory organization, package details, pin-compatible family candidates, application guidance, and design considerations into one engineering-focused reference. It also distinguishes confirmed device characteristics from parameters that require direct confirmation in the manufacturer documentation before schematic or PCB release.

RFQ צור קשר
W78E051C40DL - 40MHz 8-Bit 8051 MCU | Nuvoton
W78E051C40DL

W78E051C40DL - 40MHz 8-Bit 8051 MCU | Nuvoton

Nuvoton Technology Corporation W78E051C40DL is an 8-bit W78 8051-compatible microcontroller operating up to 40 MHz, with 4 KB (4K x 8) flash program memory, 128 bytes of RAM, and 32 I/O pins in a 40-pin DIP package. The device combines a compact 8051 instruction-set architecture with integrated flash memory for embedded control applications that require deterministic operation and a modest memory footprint. An 8051-compatible microcontroller is an embedded processing IC designed to execute firmware for peripheral control, signal acquisition, logic sequencing, and communication tasks. Within the product hierarchy, it is a microcontroller, an embedded processing IC, and a semiconductor. The W78E051C family combines the established 8051 programming model with faster execution, flash program storage, and a broad selection of general-purpose I/O for cost-sensitive embedded products. The principal device characteristics include a 40 MHz operating speed, 4 KB of flash program memory, 128 bytes of RAM, and 32 I/O pins. Flash memory retains its programmed contents when power is removed, eliminating the need for a separate external program-memory device in systems whose firmware fits within 4 KB. The 32 I/O pins provide interfaces for switches, sensors, indicator devices, relays, displays, and other digital peripherals. The W78E051C architecture is intended for compact embedded control rather than high-throughput processing. Its 8051-compatible software environment allows existing 8051 code and development practices to be reused when an application can be implemented within the available 4 KB flash and 128-byte RAM limits. The 40 MHz clock rating also provides more timing margin than legacy 8051 derivatives operating at substantially lower frequencies. Typical applications include appliance controllers, small motor-control boards, temperature-sensing instruments, digital timers, LED indicators, key scanners, general-purpose industrial controllers, and embedded products with several digital input and output functions. The 40-pin DIP format is particularly suitable for through-hole prototyping, educational systems, and controller assemblies where manual insertion and straightforward inspection are useful. Designers should verify the pinout, oscillator configuration, reset behavior, supply limits, and programming procedure against the manufacturer datasheet before finalizing a PCB. Because program memory and RAM are limited, firmware architecture should minimize large tables and deeply nested call chains. A conservative prototype strategy is to reserve code space for diagnostics and leave the external I/O pins unused until their electrical functions are confirmed. This page organizes the core W78E051C40DL specifications, practical application guidance, package considerations, and design checks into one engineering-focused reference. It also distinguishes directly documented device characteristics from electrical details that still require confirmation from the official W78E51C/W78E051C datasheet.

RFQ צור קשר
W78E051C40FL - 8-Bit 40MHz 8051 MCU | Nuvoton
W78E051C40FL

W78E051C40FL - 8-Bit 40MHz 8051 MCU | Nuvoton

The Nuvoton Technology Corporation W78E051C40FL is an 8-bit 8051-compatible microcontroller with 4KB (4K x 8) of program memory, 128 bytes of RAM, 36 I/O pins, a 40MHz maximum operating frequency, and a 44-BQFP package. The device is identified as a 5V part in product listings and is positioned for embedded-control designs requiring a moderate number of external I/O and a compact, pin-compatible package. An 8-bit microcontroller is a semiconductor that executes firmware from nonvolatile program memory and controls embedded-system inputs and outputs. The W78E051C40FL belongs to the 8051-compatible microcontroller hierarchy: MCU, embedded processor, 8-bit processor, and semiconductor. Its 36 available I/O pins allow the device to interface with sensors, indicators, switches, relays, communication devices, and other peripheral circuits without requiring a high-pin-count package. The principal confirmed specifications are 4KB of flash program memory, 128 bytes of RAM, 36 I/O lines, a maximum clock speed of 40MHz, and a 44-BQFP package. These characteristics make the device suitable for compact control systems in which the application firmware can fit within the available 4KB program-memory area and temporary working variables can remain within the 128-byte RAM space. The 5V operating designation also places it in the conventional voltage range for many legacy-compatible embedded designs. The W78E051C40FL uses the established 8-bit 8051 programming model rather than a 32-bit or high-performance application-processor architecture. This architecture is appropriate for supervisory logic, digital control, panel interfaces, and embedded products where deterministic control and broad peripheral integration matter more than large code storage or high-bandwidth computation. Firmware organization must account for the limited 4KB program area and 128-byte RAM allocation. Typical use cases include industrial control panels, building-control modules, appliance controllers, power-supply supervisory circuits, instrumentation interfaces, and small automation products. In each case, the 36 I/O pins can distribute control and monitoring functions, while the 40MHz clock provides execution headroom for interrupt handling, state-machine logic, and communication routines. Peripheral capabilities, interrupt vectors, timers, and communication functions should be confirmed against the manufacturer datasheet before a design is released. PCB implementation should preserve the 44-BQFP footprint and route each signal according to the manufacturer pin-description table. Stable decoupling close to the supply pins, a deliberate ground-plane strategy, and unobstructed programming or test access are essential. Because the public product information does not expose a complete verified pin list, designers should use the official datasheet for pin assignment, oscillator configuration, reset requirements, and programming guidance rather than inferring connections from the package drawing. This product page combines the confirmed memory, I/O, speed, voltage, and package characteristics with sourcing guidance, engineering notes, application analysis, and a transparent comparison framework. It also distinguishes confirmed device attributes from parameters that require confirmation from the manufacturer datasheet, helping engineers shorten component-selection and hardware-review cycles without obscuring design-critical uncertainty.

RFQ צור קשר
W78E051C40PL - 8-bit 8051 MCU, 4KB Flash, 40MHz, 44-PLCC | Nuvoton
W78E051C40PL

W78E051C40PL - 8-bit 8051 MCU, 4KB Flash, 40MHz, 44-PLCC | Nuvoton

The Nuvoton/Winbond W78E051C40PL is an 8-bit 8051-compatible microcontroller operating up to 40 MHz, integrating 4 KB of in-system programmable Flash EPROM and 128 bytes of on-chip RAM in a 44-pin PLCC package. According to the manufacturer datasheet (publication release November 10, 2006, Revision A4), the W78E051C40PL exposes four 8-bit bi-directional bit-addressable I/O ports (P0-P3) plus an additional 4-bit P4 port, two 16-bit timer/counters, a full-duplex UART, and an enhanced 6-source/2-level interrupt controller. The "40" suffix denotes the 40 MHz top clock, while the "PL" package code designates the 44-lead Plastic Leaded Chip Carrier (JEDEC MS-018). Programming is supported via standard 8051 tools because the instruction set is binary-compatible with the industry-standard MCS-51 core. An 8051 microcontroller (technically an MCS-51 family MCU) is an 8-bit Harvard-architecture CISC microcomputer originally introduced by Intel in 1980; despite its age the family remains popular in cost-sensitive, deterministic, deeply embedded applications because of its tiny footprint, predictable interrupt latency, and unparalleled third-party tool support. As a Flash EPROM variant the W78E051C family sits at the highest tier of the classic 8051 hierarchy: mask-ROM < OTP EPROM < Flash EPROM, with Flash enabling ISP and field-upgradeable firmware. In the broader taxonomy, an MCU is a programmable subset of a microprocessor and, more generally, a digital integrated circuit under power management and embedded-computing classifications. Key features include 4 KB Flash program memory, 128 bytes internal RAM, 36 general-purpose digital I/O lines, two 16-bit timers/counters, one UART with framing-error detection, six interrupt sources with two priority levels, on-chip oscillator with external crystal, power-saving Idle and Power-Down modes, and an in-system programming (ISP) interface through the serial port. According to the datasheet the device supports a wide operating frequency range, allowing software to reduce clock speed dynamically for power-sensitive applications. Architecturally, the W78E051C uses a 12-clock-per-machine-cycle core (the classic 8051 convention) with separate 64 KB program and 64 KB external-data address spaces, plus a 256-byte internal RAM space split between register banks, bit-addressable area, and user RAM. The Flash memory subsystem provides on-chip page-erase and byte-program capability, supporting in-application firmware updates via the UART bootloader on PLCC-package variants. Typical applications include industrial control subsystems, home appliance mainboards, keyboard/mouse scanners, sensor signal conditioning, low-cost USB bridges, LED display drivers, and legacy 8051 firmware upgrades. The wide frequency range and low-power Idle/Power-Down modes make it suitable for both mains-powered controllers and battery-backed utilities. Design-wise, ensure the EA/VPP pin is tied to VCC for internal-Fetch operation, or driven to +12 V only during parallel programming. Decouple VCC and AVCC (if present) with 0.1 microfarad ceramic capacitors placed within 5 mm of the pins to suppress switching noise during oscillator start-up and ISP writes. This page synthesizes distributor pricing, cross-reference drop-in alternatives (Nuvoton W78E052 and W78E058 variants) and practical PCB layout notes not consolidated in the manufacturer datasheet.

RFQ צור קשר
W78E051DDG - 8-Bit 40MHz 4KB Flash MCU | Nuvoton
W78E051DDG

W78E051DDG - 8-Bit 40MHz 4KB Flash MCU | Nuvoton

Nuvoton Technology Corporation W78E051DDG is an 8-bit 8052-compatible W78 microcontroller with 4KB of Flash program memory and a maximum clock frequency of 40MHz. It operates from 2.4V to 5.5V and is supplied in a 40-pin DIP package. The verified distributor data identifies the device as Pb-free and specifies an operating temperature range of -40°C to +70°C. An 8-bit microcontroller is a compact embedded-control device integrating a CPU, program memory, data memory, and peripherals on one semiconductor package. Within the product hierarchy, W78E051DDG belongs to the embedded microcontroller class and is positioned for cost-sensitive control systems that require an 8-bit processing engine, Flash memory, and a conventional through-hole package. The 8052-compatible architecture also supports established embedded software and instruction-set familiarity. The primary features available from the verified data are 4KB of Flash program memory, operation up to 40MHz, a 2.4V to 5.5V supply range, and Pb-free construction. These attributes make the device applicable to industrial controllers, embedded automation equipment, motor-control systems, metering equipment, and connected low-power board designs. Its 40-DIP format also supports prototype construction and through-hole assembly. Technically, the W78E051DDG combines an 8-bit processor core with on-chip Flash rather than relying solely on an external program-memory device. A 40MHz operating rate provides additional timing headroom for peripheral servicing and control-loop execution, while the 2.4V minimum supply voltage supports integration into systems designed around low-voltage logic. Detailed RAM, timer, UART, GPIO, oscillator, and electrical-current information is not present in the supplied source data and should be confirmed in the manufacturer datasheet. Typical applications include simple motor controllers, industrial sequence-control boards, appliance-control modules, instrumentation interfaces, metering equipment, and compact embedded automation nodes. The through-hole 40-DIP package is particularly useful where production volumes are modest, prototype interchangeability is important, or automated through-hole assembly is already available. Firmware developers should use the manufacturer’s register definitions, memory map, and peripheral documentation when creating new designs. Design planning should begin with confirming the exact pinout, oscillator requirements, reset behavior, available peripheral functions, and memory map from the W78E051 family documentation. The 2.4V to 5.5V operating range does not establish the permissible voltage on every I/O pin, so signal-level compatibility must be verified separately. Decoupling and grounding should follow the datasheet reference layout rather than relying only on general 8052 conventions. This page consolidates verified distributor specifications, procurement links, application guidance, and explicit data gaps for the W78E051DDG. It distinguishes confirmed 8-bit, 40MHz, 4KB Flash, voltage, temperature, and package attributes from unreported specifications, helping engineers make an evidence-based procurement and design decision without filling unknown values with assumptions.

RFQ צור קשר
W78E051DFG - 40MHz 8052 8-Bit MCU with 4KB Flash | Nuvoton
W78E051DFG

W78E051DFG - 40MHz 8052 8-Bit MCU with 4KB Flash | Nuvoton

Nuvoton Technology Corporation W78E051DFG is an 8-bit 8052-compatible microcontroller operating up to 40 MHz, with 4 KB of flash program memory and 36 general-purpose I/O pins in a 44-pin QFP package. Its stated operating supply range is 2.4 V to 5.5 V, making it suitable for embedded control systems operating from a regulated 5 V rail or other compatible source. An 8052 microcontroller is an embedded microcontroller architecture combining a small general-purpose CPU core with program memory, data memory, parallel I/O, serial communication, timers, and system-control peripherals. The W78E051 series belongs to the broader microcontroller category, which sits above processor cores and below embedded-control semiconductor solutions used in industrial products, appliances, access controls, and compact automation equipment. The W78E051DFG provides 4 KB (4K x 8) of flash program memory for firmware storage and an operating speed of 40 MHz. Its listed peripherals include a power-on reset, watchdog timer, UART/USART interface, and external bus interface. The 36 available I/O pins provide substantial parallel connectivity for discrete inputs, output control, indicators, relays, and external interface signals without requiring a larger package. The device operates from 2.4 V to 5.5 V and is specified for industrial temperature conditions from -40 °C to 70 °C. Flash memory allows firmware to remain resident without a separate external memory component, simplifying both PCB routing and production programming. The 40 MHz clock rate also gives the 8-bit CPU more instruction throughput than lower-frequency 8051-class devices while retaining the familiar programming model. Typical uses include appliance controllers, keyboard and human-interface panels, access-control equipment, small motor or relay controllers, industrial interface modules, and compact embedded products. Its combination of 36 I/O pins, serial communication, external bus support, and watchdog protection is particularly useful when a design needs flexible parallel connectivity without a high-pin-count microcontroller package. When designing around the W78E051DFG, verify every peripheral, clock option, interrupt vector, and electrical limit against the current manufacturer datasheet before schematic release. The supplied search evidence confirms the principal specifications but does not expose the complete pin map, memory map, timing diagrams, or electrical characteristics needed for a production design. This page consolidates the verified distributor information, core MCU specifications, sourcing links, and design limitations for the W78E051DFG. It also separates confirmed facts from unavailable engineering data, helping engineers establish whether the 44-pin 8052-compatible device is appropriate before beginning a drop-in PCB or firmware evaluation.

RFQ צור קשר
W78E051DLG - 8-Bit 40MHz 4KB Flash 8051 MCU | Nuvoton
W78E051DLG

W78E051DLG - 8-Bit 40MHz 4KB Flash 8051 MCU | Nuvoton

The Nuvoton Technology Corporation W78E051DLG is an 8-bit 8052-compatible W78 series microcontroller with a 40 MHz operating frequency, 4 KB of programmable flash memory organized as 4K x 8, and a 48-pin LQFP package. It operates from a 2.4 V to 5.5 V supply, supporting both 5 V and 3.3 V embedded systems. A microcontroller, or MCU, is a semiconductor that integrates a CPU core, flash program memory, data memory, and peripherals into one device. Within the embedded-control hierarchy, the W78E051DLG belongs to the 8-bit 8051/8052 MCU family rather than a 16-bit or 32-bit microcontroller. Its role is to execute embedded firmware, monitor digital inputs, drive outputs, and communicate with sensors, actuators, human-interface devices, and industrial peripherals. The key specifications of this device are a 40 MHz clock, 4 KB flash for firmware storage, and a 2.4 V to 5.5 V operating range. Verified distributor listings describe the part as an 8052 W78 microcontroller with 4K x 8 flash and Pb-free construction. The 48-pin LQFP-48 package measures 7 mm by 7 mm and provides a practical pin count for external interfacing, clocking, reset, programming, and mixed-signal control applications. The 8052-compatible architecture is appropriate for cost-sensitive embedded designs that rely on established compiler, debugger, and programming-tool ecosystems. At 40 MHz, the processor offers considerably more instruction throughput than legacy 8-bit systems operating near 12 MHz or 24 MHz. The available verified data does not state the RAM capacity, peripheral set, oscillator options, ADC performance, or timer configuration, so those parameters should be confirmed in the manufacturer datasheet before final schematic or firmware design. Typical uses for the W78E051DLG include compact industrial controllers, appliance control boards, data-acquisition modules, LED and display systems, and 8-bit sensor-hub designs. The 36 I/O indicated in one distributor listing provides a practical basis for digital control, while the 4 KB flash limit makes the device best suited to firmware with modest code size. Applications requiring substantial buffer storage, high-resolution analog conversion, or large protocol stacks should verify those requirements before committing to the part. Design planning should begin by confirming the complete pin assignment, peripheral multiplexing, and programming interface in the manufacturer datasheet. The LQFP-48 footprint also requires deliberate decoupling, clock-routing, and reset-layout planning to avoid analog-noise coupling and startup problems. Because the verified listings provide only a partial specification set, procurement decisions should not rely on distributor summaries alone. This page consolidates distributor pricing, availability, package information, and verified electrical attributes while separating confirmed data from unconfirmed parameters. It also provides a same-family drop-in comparison framework and practical design notes that are not present in a standard distributor catalog entry.

RFQ צור קשר
W78E051DPG - 8-Bit 40MHz 4KB Flash MCU | Nuvoton
W78E051DPG

W78E051DPG - 8-Bit 40MHz 4KB Flash MCU | Nuvoton

Nuvoton Technology Corporation W78E051DPG is an 8-bit 8052-compatible microcontroller operating up to 40 MHz, with 4 KB of Flash program memory, 256 bytes of RAM, and 36 programmable I/O pins in a 44-LCC J-lead package. Its verified supply-voltage range is 2.4 V to 5.5 V, and distributor listings identify the device as Pb-free with an operating-temperature range of -40 °C to 70 °C. An 8-bit microcontroller is a compact embedded-control device whose processor, program memory, data memory, and peripherals are integrated on one semiconductor package. Within the broader hierarchy of microcontroller, embedded processor, and semiconductor, the W78 series combines an 8052-class architecture with deterministic I/O for cost-sensitive control systems. The W78E051DPG is intended for compact embedded controllers rather than high-compute systems where external memory, extensive connectivity, or large application code are required. Key characteristics include a maximum clock frequency of 40 MHz, 4 KB or 4K × 8 bits of Flash memory, 256 bytes of RAM, and 36 programmable pins. Integrated power-on reset and watchdog-timer functions are identified in the verified product listing. These resources support small control loops, digital I/O expansion, status monitoring, and basic sequencing without requiring a separate external nonvolatile-memory device for firmware storage. The device uses an 8052-compatible core and belongs to Nuvoton's W78 microcontroller family. Its 40 MHz operating capability provides substantially more instruction throughput than legacy 12 MHz 8051-class designs, while the compact 4 KB Flash budget keeps firmware architecture focused. The 36 programmable I/O pins offer a broad interface count for switches, indicators, relays, sensors, and external control logic when the board-level pin multiplexing and electrical limits are respected. Typical embedded uses include industrial control modules, appliance controllers, building equipment, small sensor nodes, and compact peripheral controllers. The 44-LCC J-lead package supports through-hole assembly and is useful when a product requires a mechanically robust package or inspection-friendly leads. The 2.4 V to 5.5 V operating range also permits integration with common low-voltage control systems, provided every connected peripheral shares a compatible logic level. The principal design trade-off is the limited 4 KB Flash and 256-byte RAM capacity. Firmware must be compact, stack depth must be checked carefully, and boundary-heavy algorithms may require a larger microcontroller. Exact pin multiplexing, peripheral behavior, reset timing, clock configuration, and absolute maximum ratings must be confirmed against the manufacturer datasheet before schematic release. This page consolidates verified distributor specifications, sourced operating limits, package information, application guidance, and procurement references. It also clearly separates verified facts from parameters that require confirmation, avoiding unsupported claims while providing a concise engineering starting point for the Nuvoton W78E051DPG.

RFQ צור קשר
W78E052B40DL - 8-Bit 40MHz 8051 MCU | Nuvoton
W78E052B40DL

W78E052B40DL - 8-Bit 40MHz 8051 MCU | Nuvoton

The Nuvoton Technology Corporation W78E052B40DL is an 8-bit 8051-compatible microcontroller operating at up to 40 MHz, with 8 KB of Flash program memory and 32 general-purpose I/O pins in a 40-pin DIP package. Its 256 x 8-bit RAM organization provides 256 bytes of internal data memory for variables, stack operations, and working buffers. An 8051-compatible microcontroller is an embedded processing device built around the established 8051 instruction-set architecture and peripheral model. It belongs to the broader hierarchy of microcontrollers, embedded processors, and semiconductors, combining a CPU core, program memory, data memory, I/O ports, timers, and serial-interface resources on one integrated circuit. The W78E052B40DL targets applications where an established 8051 software base is valuable. The three principal resource figures are a 40 MHz operating speed, 8 KB of Flash program memory, and 32 I/O pins. Flash memory retains programmed firmware without power, while the 32 I/Os provide interfaces for sensors, switches, displays, communication signals, and control outputs. The through-hole 40-DIP format also supports conventional PCB assembly and prototype wiring rather than requiring a fine-pitch surface-mount process. The device combines the familiar 8051 architecture with a faster clock and Flash-based code storage. Its 8K x 8 program organization provides 8192 addressable program-memory locations, while the 256 x 8 RAM organization provides 256 bytes of byte-addressable data storage. These figures determine the firmware and working-memory budget, so software architecture and buffer allocation should be checked against both limits during design planning. Typical uses include compact embedded controllers, legacy 8051-compatible equipment, industrial interface modules, appliance-control boards, and educational prototyping systems. A design can connect external sensors and actuators through the 32 I/O pins, execute stored firmware from Flash, and use the internal RAM for control state. Final peripheral suitability should be confirmed from the manufacturer pin-description and electrical-characteristics tables. The most important design step is to preserve the 40-DIP footprint and verify every signal against the manufacturer datasheet before layout. Confirm supply voltage, clock configuration, reset requirements, port direction, and peripheral availability for the specific firmware plan. For brownout, timing, or environmental requirements not stated by the product listing, perform those checks against the manufacturer datasheet rather than inferring them from the 8051 family name. This page combines the verified 8-bit architecture, 40 MHz speed, 8 KB Flash memory, 256-byte RAM, 32 I/O pins, and 40-DIP package details with practical comparison, sourcing, and design guidance. It is intended to help engineers identify the correct MCU and determine whether an existing 8051 design can be implemented without changing its controller footprint.

RFQ צור קשר
W78E052B40FL - 40MHz 8KB Flash 8051 MCU | Nuvoton
W78E052B40FL

W78E052B40FL - 40MHz 8KB Flash 8051 MCU | Nuvoton

Nuvoton Technology Corporation W78E052B40FL is an 8-bit 8051 W78-series microcontroller with an operating speed of 40 MHz, 8 KB of Flash program memory, 256 x 8 bits of RAM, and 36 I/O pins. The device is supplied in a 44-BQFP surface-mount package. These characteristics place it in the MCU > 8-bit microcontroller > 8051-compatible embedded controller category for compact control systems requiring fast instruction execution and limited embedded code storage. An 8051-compatible microcontroller integrates a CPU core, program memory, data memory, I/O ports, and embedded control peripherals on one semiconductor device. The W78E052B40FL provides 8 KB organized as 8K x 8 for firmware storage and 256 x 8 bits of RAM for working variables. Its 36 available I/O lines provide connections for digital control signals, while its 40 MHz operating speed supports control tasks that require more computational throughput than a low-speed general-purpose 8-bit platform. The most important device characteristics are its 8-bit processor architecture, 40 MHz maximum speed, 8 KB Flash memory, 256 x 8-bit RAM, 36 I/O pins, and internal oscillator. Flash program memory allows firmware to be stored in a nonvolatile semiconductor memory structure. The integrated oscillator eliminates the need for an external clock source when the device's internal timing system is suitable for the design. The 44-BQFP package also provides a defined surface-mount land pattern for PCB assembly. The W78E052B40FL is suited to compact embedded controllers that need deterministic digital I/O, modest firmware capacity, and 8051-compatible software support. Potential system roles include industrial machine controls, appliance controllers, digital sensor aggregators, simple power-conversion supervisory circuits, stepper or motor-control front ends, and compact human-machine-interface controllers. Final peripheral selection and application suitability should be confirmed against the complete manufacturer datasheet and device pin description. Designers should treat the 36 I/O pins as the principal external interface and verify every port's alternate function before assigning a signal. Decoupling, oscillator startup, programming mode, reset behavior, and unused-pin treatment should follow the manufacturer's reference circuit and layout guidance. The device's limited 8 KB program-memory capacity makes code-size budgeting especially important for communications, logging, and feature-rich control firmware. This page consolidates the verified device identity, operating characteristics, package information, sourcing context, drop-in replacement assessment, and practical selection guidance. It also highlights where firmware, pin-level, and peripheral details must be checked in the manufacturer documentation before a new PCB or embedded product is released.

RFQ צור קשר
W78E052B40PL - 8-Bit 40MHz 8051 Microcontroller | Nuvoton
W78E052B40PL

W78E052B40PL - 8-Bit 40MHz 8051 Microcontroller | Nuvoton

Nuvoton W78E052B40PL is an 8-bit W78 8051-compatible microcontroller with a 40 MHz clock, 8 KB flash memory, and a 44-LCC J-lead package. The W78 series combines a traditional 8-bit MCU architecture with integrated flash program memory, making it suitable for embedded control, industrial automation, appliance control, and compact communications designs. The 40 MHz operating speed supports faster instruction execution than conventional low-speed 8051 devices while retaining compatibility with established 8051 software tools and peripherals. The W78E052B40PL is designed for applications requiring moderate processing performance and embedded nonvolatile storage. Its 8 KB flash capacity is suitable for compact firmware, boot logic, state-machine control, and peripheral coordination. The 44-LCC J-lead package provides a leaded component format that can simplify prototype assembly, visual inspection, and through-hole PCB assembly compared with fine-pitch surface-mount packages. The 8051 instruction set and W78 microcontroller family make this device recognizable to engineers developing legacy-compatible embedded platforms. The core runs at 40 MHz, while the available flash organization supports firmware storage without an external memory device. The device can be used as the central controller in small industrial systems, or as a dedicated subsystem controller where a deterministic, low-complexity architecture is preferable to a higher-cost application processor. Common application areas include motor and relay sequencing, temperature-control panels, security and access-control terminals, keyboard interfaces, LED indicators, sensor aggregation, and communication equipment. The W78E052B40PL is also useful in educational and industrial-control environments where an 8-bit MCU, internal flash, and manageable package size are priorities. When designing a PCB, treat the 44-LCC J-lead footprint as the controlling mechanical interface and verify the manufacturer's pin-assignment table before routing power, oscillator, reset, and I/O nets. Confirm oscillator selection, reset requirements, programming method, and decoupling requirements against the manufacturer datasheet. The component's 8051 heritage makes software-tool compatibility a key consideration when replacing an older controller. This product page combines verified distributor specifications, package information, sourcing guidance, replacement analysis, and practical design notes. It emphasizes the W78E052B40PL's 40 MHz speed, 8 KB flash organization, 8-bit architecture, and 44-LCC package so design engineers can evaluate it quickly against other embedded-control choices.

RFQ צור קשר