מוצרים (44,000+)

W78E052C40DL - 40MHz 8KB 8051 Flash Microcontroller
W78E052C40DL

W78E052C40DL - 40MHz 8KB 8051 Flash Microcontroller

The Nuvoton Technology Corporation W78E052C40DL is an 8-bit W78-series microcontroller with a 40 MHz operating frequency, 8 KB of program Flash memory, 32 general-purpose I/O pins, and a 40-pin DIP package. Its instruction set is compatible with the standard 8051 architecture, allowing engineers to retain familiar programming models while using a higher-frequency general-purpose control device. A microcontroller is a compact embedded-control IC that integrates a processor core, program memory, data memory, I/O ports, and peripherals on one semiconductor device. Within the semiconductor hierarchy, the W78E052C40DL belongs to the 8-bit MCU, embedded-controller, and 8051-compatible product families. This combination makes it suitable for products that need deterministic control functions without the cost or complexity of a larger application processor. The device provides 8 KB of Flash program memory, a 40 MHz clock rating, and 32 I/O pins. Its listed peripherals include a UART/USART interface, external-bus or external-memory interfacing, power-on reset, and a watchdog timer. These functions support serial communications, deterministic peripheral monitoring, and embedded supervisory control in industrial, consumer, communications, and appliance equipment. The W78E052C family is designed around an 8051-compatible instruction set while supporting a wider operating-frequency range than a conventional baseline 8051 implementation. In a typical system, firmware uses the parallel I/O ports to drive relays, indicators, displays, or actuators and uses the serial interface for configuration exchange or communication with another controller. The watchdog provides an independent mechanism for recovering from stalled firmware execution. Typical applications include appliance controllers, industrial sequence controllers, embedded interface modules, communication equipment, instrumentation peripherals, and compact automation controllers. The 40 MHz operating rating provides more instruction throughput than slower 8051-class devices, while the 8 KB Flash footprint is appropriate for compact control firmware rather than feature-heavy graphical or high-capacity applications. PCB design should follow the pin arrangement and decoupling guidance in the manufacturer datasheet. Because this is a 40-pin DIP device, a through-hole layout is required rather than a surface-mount land pattern. Confirm oscillator, reset, port, and supply connections against the exact W78E052C40DL pin description table before fabrication, and avoid assigning alternate functions to port pins without checking their electrical behavior. This page consolidates the device identity, core specifications, connectivity features, lifecycle information, sourcing workflow, and application guidance. It also distinguishes the documented 40 MHz, 8 KB Flash configuration from related W78E052 variants, helping engineers confirm whether the obsolete W78E052C40DL remains appropriate for an existing design or whether a redesign should use a currently supported controller.

RFQ צור קשר
W78E052C40FL - 40MHz 8KB 8051 MCU | Nuvoton
W78E052C40FL

W78E052C40FL - 40MHz 8KB 8051 MCU | Nuvoton

The Nuvoton Technology Corporation W78E052C40FL is an 8-bit W78 series microcontroller with a 40 MHz maximum clock, 8 KB of program Flash organized as 8K x 8, and a 44-pin PQFP package. It operates from a 5 V supply and uses an 8051-compatible instruction set, placing it in the 8-bit CISC microcontroller category. Its combination of a 40 MHz operating frequency and 8 KB Flash makes it suitable for compact embedded control, monitoring, and communication-oriented designs. An 8-bit microcontroller such as the W78E052C40FL integrates a processor core, program memory, data memory, I/O, and embedded peripherals on one semiconductor device. This integration allows a control system to execute firmware, acquire inputs, operate outputs, and manage protocol or timing tasks without a separate external processor. The W78 series maintains compatibility with the standard 8051 instruction set, which can simplify porting code from conventional 8051 designs and simplify the use of established 8051 development workflows. The W78E052C40FL operates at up to 40 MHz and includes 8 KB of Flash program memory. Its 8-bit data architecture is suited to sensors, actuators, simple user interfaces, and supervisory control functions where high arithmetic throughput is not essential. The 5 V operating supply also places it in equipment using a conventional 5 V logic rail. Flash retains programmed firmware without power, providing a practical foundation for compact production-control, appliance-control, and industrial-automation products. The 44-pin PQFP package provides a substantial pin count for an 8-bit MCU and exposes the device's I/O and peripheral connections on a leaded surface-mount footprint. The part is identified as a W78 8051-compatible microcontroller with low-power-consumption characteristics. Its architecture is intended to support a wider frequency range than basic 8051 implementations while retaining instruction-set compatibility. Detailed RAM capacity, peripheral configuration, interrupt structure, and electrical limits should be established from the manufacturer datasheet before schematic capture. Typical applications include small industrial controllers, motor and relay sequencing, instrumentation interfaces, building equipment controllers, and communication modules that use a compact 8-bit control engine. It can also supervise LEDs, switches, keypads, and sensors where deterministic control and a familiar instruction set are more valuable than a high-performance 32-bit processor. A 40 MHz clock provides additional timing headroom for interrupt-driven control and serial communication routines. Designers should assign pins from the manufacturer pin-description table, provide the required oscillator and reset circuitry, and decouple each supply connection close to the package. PCB planning should preserve routing access for all 44 PQFP leads and provide adequate board area for the device's thermal and electrical requirements. Firmware development should use tools compatible with the W78E052C architecture and verify timing, reset behavior, and peripheral initialization against the datasheet. This page combines the exact W78E052C40FL electrical identity, verified 8051 compatibility and memory details, package-aware alternatives, comparison parameters, and practical PCB and firmware guidance. It is intended to help engineers identify the correct part, assess whether a listed W78-series alternative can reuse the same footprint, and move directly into design validation using the manufacturer datasheet.

RFQ צור קשר
W78E052C40PL - 40MHz 8051 MCU with 8KB Flash | Nuvoton
W78E052C40PL

W78E052C40PL - 40MHz 8051 MCU with 8KB Flash | Nuvoton

The Nuvoton Technology Corporation W78E052C40PL is an 8-bit 8051-compatible microcontroller operating at up to 40 MHz, with 8 KB of Flash program memory and a 44-pin LCC J-lead package. It is designed for embedded control applications requiring a standard 8051 instruction set, multiple I/O ports, timers, a watchdog timer, and serial communication in a compact surface-mount package. An 8051-compatible microcontroller is an embedded processing device whose instruction set follows the widely established Intel 8051 architecture. Within the product hierarchy, the W78E052C40PL is a microcontroller, an embedded IC, and a programmable semiconductor used to supervise sensors, control actuators, read inputs, and coordinate system behavior. Its compatibility with the standard 8051 instruction set simplifies migration of established control code and supports a broad collection of established toolchains and peripherals. The device provides 8 KB of Flash EPROM for program storage and 256 bytes of RAM for working data. Its interface resources include four 8-bit bidirectional, bit-addressable I/O ports, an additional 4-bit P4 port, three 16-bit timer/counters, a hardware watchdog timer, and a serial port. The 40 MHz clock rating supports faster instruction execution than slower 8051-class devices while retaining the familiar programming model. Internally, the W78E052C combines an 8-bit CPU core, on-chip program and data memory, parallel I/O, timing resources, and serial communication in one integrated device. The manufacturer describes the family as using advanced CMOS technology and operating from a 5 V supply. These characteristics make the controller appropriate for compact industrial controllers, embedded instrumentation, appliance control, data acquisition, and legacy 8051 peripheral designs. Typical applications include temperature controllers, motor and valve supervisors, keypad interfaces, LED status panels, programmable timers, serial-connected sensors, and small automation modules. The 44-LCC J-lead package supports higher pin density than a conventional 28-pin DIP arrangement, while the Flash memory permits firmware updates without removable memory devices. PCB design should preserve the manufacturer-recommended power, ground, clock, and decoupling connections, and the exposed board area around the J-lead package should accommodate soldering and cleaning requirements. Firmware should use the watchdog timer for recovery from stalled loops, while timer/counter resources should be allocated carefully when multiple timing functions must operate concurrently. This product page consolidates the verified architecture, memory, timing, package, and interface characteristics of the W78E052C40PL with application guidance, engineering design notes, and transparent comparisons that help engineers evaluate whether this 8051-compatible controller fits an existing embedded platform.

RFQ צור קשר
W78E052DDG - 40MHz 8-bit 8051 MCU | Nuvoton
W78E052DDG

W78E052DDG - 40MHz 8-bit 8051 MCU | Nuvoton

The Nuvoton Technology Corporation W78E052DDG is an 8-bit 8051-compatible CISC microcontroller operating up to 40 MHz, with 8 KB of flash program memory, 256 bytes of RAM, 36 I/O pins, and a 40-pin DIP package. It operates across the verified 2.4 V to 5.5 V supply range and supports temperature grades identified as -40°C to 70°C by Mouser and -40°C to 85°C for the W78E052D family by Nuvoton. The product is listed as Not Recommended for New Designs. An 8051-compatible microcontroller is an embedded controller that executes instruction sets designed around the established 8051 architecture while extending it with modern flash memory and configurable peripheral resources. Within the product hierarchy, this device is a microcontroller, an embedded processing IC, and ultimately a semiconductor. Nuvoton describes the W78E052D family as a 6T/12T architecture configurable for compatibility with traditional 12T 8051 designs. Verified distinguishing features include an operating frequency of up to 40 MHz, 8 KB of 8K × 8 flash program memory, 256 × 8 RAM, and 36 general-purpose I/O lines. The 40-DIP package supports through-hole PCB assembly and is convenient for prototypes, legacy industrial controls, alarm systems, bar-code readers, KVM equipment, key phones, user interfaces, and IPC products. A single full-duplex UART is also identified for serial communications. The W78E052D family combines a 6T/12T selectable machine cycle with flash memory and a broad supply range. Faster 6T operation can reduce instruction-cycle timing compared with traditional 12T execution, while 12T compatibility helps preserve behavior expected by established 8051 designs. Designers must still verify oscillator, reset, timing, peripheral, and software assumptions against the manufacturer documentation before replacing an existing design. A through-hole DIP-40 MCU is most appropriate where manual assembly, socketed prototypes, repairability, or stable industrial availability matter more than minimum PCB area. The DIP package exposes 36 I/O pins alongside control and power functions, allowing substantial parallel digital connectivity but requiring careful planning for board height and connector clearance. The primary engineering trade-off is lifecycle status: Nuvoton marks the W78E052D family Not Recommended for New Designs. Existing supported programs may continue using available stock, but new designs should first evaluate the W78E054D or another currently recommended MCU and perform a complete software, electrical, and package migration review. This page consolidates distributor pricing, lifecycle information, application context, verified specifications, and drop-in assessment data that are distributed across manufacturer and distributor pages. Engineering decisions should remain anchored to the manufacturer datasheet rather than distributor summaries alone.

RFQ צור קשר
W78E052DFG - 8-Bit 8051 8KB MCU | Nuvoton | Embedded Control
W78E052DFG

W78E052DFG - 8-Bit 8051 8KB MCU | Nuvoton | Embedded Control

The Nuvoton Technology Corporation W78E052DFG is an 8-bit 8051-compatible microcontroller with 8KB of Flash program memory, a 2.4V to 5.5V operating-voltage range, and support for frequencies up to 40MHz according to the supplied product references. It is offered in a 44-pin QFP package. The device belongs to the W78E052D family of configurable 6T/12T 8051 microcontrollers and is intended for embedded control applications involving security and alarm systems, barcode readers, KVM equipment, telephones, user interfaces, and industrial control products. An 8051 microcontroller is an embedded processing IC that combines a compact 8-bit CPU, program memory, data memory, and peripherals on one device. In the product hierarchy, the W78E052DFG is a microcontroller, which is a type of embedded processor and system-on-chip used in power management, industrial automation, access control, human-interface, and communications equipment. Its traditional 8051 architecture can support established toolchains and software while the W78E052D family adds configurable 6T or 12T operation. The principal documented features include 8KB of Flash memory, operation from 2.4V through 5.5V, and compatibility with traditional 12T 8051 devices. A Globalspec listing identifies the device as an 8-bit, 40MHz MCU with 8KB of Flash. Manufacturer information describes the W78E052D as configurable for 6T or 12T operation, making it suitable for designs that require a familiar 8051 software model across multiple package and frequency configurations. The W78E052DFG is specifically identified for a 44-pin QFP package. This surface-mount package supports compact PCB construction without requiring a through-hole socket. The supplied Nuvoton Direct result lists LQFP48, PLCC44, PQFP44, TQFP44, and DIP40 as package options within the broader W78E052D family; the exact package ordering code must therefore be checked against the package drawing when replacing or redesigning a board. Typical application areas include security and alarm panels, barcode-reader controllers, keyboard-video-mouse or KVM interfaces, key telephones, compact user-interface modules, and industrial control equipment. For these systems, the important selection criteria are the 8KB code-memory capacity, 2.4V to 5.5V supply range, 8-bit processing capability, and availability of the required package and peripheral configuration. Designers should confirm the full clock, memory, peripheral, and electrical limits in the manufacturer datasheet before release. Because the family description gives broad package and temperature information, the exact ordering code must be used to confirm the device variant. The Mouser listing also specifies a Pb-free finish and a -40°C to 70°C range, while the Nuvoton product information gives a -40°C to 85°C family range, so variant-specific qualification data should control. This page consolidates the verified manufacturer description, distributor specifications, pricing reference, lifecycle status, and package information for W78E052DFG. It also distinguishes documented facts from unavailable details, providing engineers with a concise basis for initial design review while clearly identifying the datasheet and authorized distributor sources needed for final qualification.

RFQ צור קשר
W78E052DLG - 8-bit 8051 MCU, 8KB Flash, 48-LQFP | Nuvoton
W78E052DLG

W78E052DLG - 8-bit 8051 MCU, 8KB Flash, 48-LQFP | Nuvoton

The Nuvoton Technology Corporation W78E052DLG is an 8-bit 8051-compatible microcontroller with 8KB flash memory, a 2.4 V to 5.5 V operating-voltage range, and a 48-LQFP package. The W78E052D family is configurable and pin-compatible with traditional 12T 8051 devices, providing a practical migration path for embedded industrial-control, security, alarm, barcode-reader, KVM, keypad, user-interface, and IPC designs. The device is offered in a Pb-free configuration according to distributor product information, and the manufacturer lists the W78E052D family as Not Recommended for New Designs (NRND). An 8-bit microcontroller is a compact embedded-controller category used to execute firmware, read inputs, control outputs, and manage system behavior in cost-sensitive electronics. Within the broader hierarchy, the W78E052DLG is a microcontroller, an embedded-processing IC, and a semiconductor designed around the established 8051 instruction set and peripheral ecosystem. Its 8KB flash capacity is suitable for small control routines and product-specific firmware, while its broad supply-voltage range supports both 3.3 V and 5 V system designs. The key verified attributes include 8-bit processing, 8KB flash, 2.4 V to 5.5 V operation, a 48-LQFP package, and a manufacturer-described 6T/12T 8051 architecture configurable for compatibility with traditional 12T 8051 designs. The -40 °C to +85 °C operating-temperature range applies to the W78E052D family, while distributor material identifies the Pb-free W78E052DLG ordering code for operation from -40 °C to +70 °C. Exact RAM, clock, peripheral, and electrical timing values should be confirmed in the manufacturer datasheet before layout or firmware deployment. Typical uses include security and alarm panels, barcode readers, KVM controllers, key phones, compact user-interface modules, and industrial-control equipment. In these systems, the microcontroller consolidates low-speed control logic while external components provide sensors, communications, displays, actuators, and power regulation. The 48-LQFP format offers enough pins for mixed signal and peripheral connectivity while remaining compatible with conventional surface-mount assembly. Designers should verify the exact pin assignments, oscillator requirements, reset behavior, port-drive limits, and decoupling recommendations against the W78E052D datasheet. Because the family is NRND, new production designs should compare current Nuvoton 8051 options, while existing production can evaluate an explicitly documented drop-in alternative only after checking timing, firmware, mixed-signal, and lifecycle requirements. This page combines verified manufacturer and distributor information, procurement data, lifecycle context, package details, and practical selection guidance. It also clearly identifies where package, timing, memory, and pricing details require confirmation rather than presenting unsupported assumptions as guaranteed specifications.

RFQ צור קשר
W78E052DPG - 8-Bit 40MHz 8052 MCU | Nuvoton | PLCC-44
W78E052DPG

W78E052DPG - 8-Bit 40MHz 8052 MCU | Nuvoton | PLCC-44

Nuvoton Technology Corporation W78E052DPG is an 8-bit 8052-compatible W78 CISC microcontroller rated up to 40 MHz, with 8 KB of flash program memory, in a 44-pin PLCC package. The device operates across the broad 2.4 V to 5.5 V supply range identified in the verified distributor data, supporting both 2.5 V, 3.3 V, and 5 V system rails. Its -40 °C to +70 °C Mouser rating makes the part suitable for mainstream industrial, embedded-control, security, alarm, barcode-reader, KVM, key-phone, user-interface, and IPC equipment. An 8051-family microcontroller is a compact CISC controller within the broader embedded-processor and semiconductor hierarchy. Its instruction set and integrated program memory are optimized for control-oriented tasks rather than high-bandwidth computation. The W78E052D family combines that established 8051 execution model with selectable clock configurations, allowing designers to choose an operating frequency appropriate to the required response time and peripheral activity. The W78E052DPG provides 8 KB of flash memory organized as 8K x 8, providing on-chip program storage without an external memory device for many firmware sizes. Its maximum stated clock frequency of 40 MHz supports faster control loops and responsive peripheral handling. Operation from 2.4 V to 5.5 V also permits integration into both legacy 5 V equipment and modern 3.3 V embedded systems without requiring a separate level-shifting interface for the MCU supply. The controller uses the 8052-compatible CISC architecture identified by DigiKey and Octopart. This architecture is appropriate for industrial interfaces, keypads, alarms, readers, and compact embedded controllers where deterministic instruction execution, compact firmware support, and peripheral integration matter more than the processing power of a 32-bit MCU. The 44-pin PLCC package exposes the controller's I/O and communication resources while supporting leaded-board assembly. Typical designs include security and alarm panels, barcode readers, keyboard-video-mouse or KVM controllers, telephone keypads, user-interface controllers, and industrial IPC modules. The family is listed as NRND, so engineers should confirm availability, lifecycle expectations, and transition planning before beginning a new high-volume design. Existing equipment can continue to be supported where exact firmware and package continuity are required. For a new PCB, use the exact PLCC-44 footprint, preserve the required bypass and oscillator connections shown by the manufacturer datasheet, and validate the programmed clock configuration against the selected supply voltage. If software timing depends on instruction cycles, verify the operating-frequency limits and timing assumptions before production release. This page consolidates verified distributor specifications, lifecycle information, sourcing links, comparison criteria, and practical replacement guidance. It also distinguishes the exact W78E052DPG ordering code from related W78 devices whose memory, package, or clock characteristics may prevent a literal drop-in replacement.

RFQ צור קשר
W78E054B40DL - 8-Bit 40MHz 16KB Flash MCU | Nuvoton
W78E054B40DL

W78E054B40DL - 8-Bit 40MHz 16KB Flash MCU | Nuvoton

The Nuvoton Technology Corporation W78E054B40DL is an 8-bit W78-series 8051-compatible microcontroller operating at up to 40 MHz, with 16 KB of Flash program memory organized as 16K x 8 bits. The device is packaged in a 40-pin DIP through-hole package. Its combination of a 40 MHz clock, Flash memory and 8051-compatible architecture makes it suitable for embedded control, industrial automation, appliance control and compact peripheral systems. A microcontroller is a programmable semiconductor that integrates a CPU core, program memory, data memory, digital I/O and supporting peripherals on one device. The W78E054B40DL belongs to the 8-bit microcontroller hierarchy, where an 8-bit processor commonly handles real-time control loops, human-interface functions and supervisory logic. Its W78-series design extends the established 8051 instruction set while using Flash memory for firmware storage, allowing firmware to be updated without removable programmable memory. The headline configuration is an 8-bit CPU operating at up to 40 MHz, 16 KB of Flash program memory and a 40-pin DIP package. The 40 MHz operating frequency gives designers additional timing margin for serial communication, control loops and peripheral servicing compared with slower 8051-class devices. The 16 KB memory capacity is suitable for compact embedded applications where the firmware remains focused rather than requiring a large application framework or external program storage. The W78E054B40DL is identified as part of the W78E054B family, with the suffix indicating the 40-pin package configuration and the B40 electrical/device variant. The datasheet family covers the W78E54B and W78E054B devices and should be used to confirm peripheral availability, electrical limits, clock requirements, pin assignments and programming procedures for the exact suffix. Through-hole DIP construction also supports conventional leaded PCB assembly and prototype rework. Typical applications include industrial controllers, building equipment, motor and relay sequencing, data-acquisition front ends, appliance controls, security-system peripherals and communication modules. Designers can use the MCU for local control, supervisory logic and protocol handling when a higher-performance processor is unnecessary. The family is particularly relevant to new 8051-oriented designs, legacy firmware maintenance and cost-sensitive embedded systems. Before finalizing a board design, verify the complete 40-pin assignment, oscillator requirements, reset behavior and peripheral multiplexing in the manufacturer datasheet. Ensure that the selected oscillator, decoupling and programming interface match the electrical requirements for the operating frequency. Because DIP packages occupy more board area than surface-mount alternatives, this device is most convenient where through-hole assembly, serviceability or prototype accessibility outweigh minimum PCB-area objectives. This product page consolidates the verified device identity, package information, memory organization and clock rating, then adds application guidance, design cautions, replacement criteria and pin-level sourcing context. It helps engineers distinguish an exact suffix replacement from a merely similar 8051 device before committing to a PCB or firmware migration.

RFQ צור קשר
W78E054B40FL - 8-Bit 40MHz 16KB Flash MCU | Nuvoton
W78E054B40FL

W78E054B40FL - 8-Bit 40MHz 16KB Flash MCU | Nuvoton

The Nuvoton Technology Corporation W78E054B40FL is an 8-bit W78 series microcontroller with a 40 MHz maximum operating frequency, 16KB (16K x 8) Flash program memory, and 36 I/O pins in a 44-pin BQFP package. The device is based on the 8051 instruction-set architecture and is intended for embedded control applications requiring deterministic peripheral integration and modest code storage. An 8051 microcontroller is an embedded processor category designed around a compact instruction set, integrated memory, timers, serial interfaces, and general-purpose I/O. The W78 series extends the classic 8051 architecture with an integrated Flash program memory implementation. These devices occupy the MCU hierarchy between general-purpose microprocessors and simpler fixed-function logic, making them useful for appliance controls, small industrial systems, access equipment, and compact embedded products. The W78E054B40FL combines 16KB of Flash program memory with 256 bytes of RAM. Its 36 available I/O lines provide interface capacity for sensors, switches, displays, actuators, and external control logic. The 40 MHz operating capability supports faster instruction execution than lower-frequency 8051 derivatives, while the 44-BQFP package exposes enough pins for parallel control and multiple peripheral connections. The part belongs to the W78E family and uses an 8051-compatible core with integrated Flash memory. Its operating architecture is intended for small embedded control systems where deterministic behavior, compact software, and a moderate peripheral set are more important than a high-performance CPU core or large application-memory footprint. Its 256-byte RAM limits complex buffering and encourages designs to use external memory only when the application genuinely requires it. Typical uses include appliance and equipment controllers, small motor or relay control panels, sequential industrial modules, instrumentation interfaces, and compact 8-bit embedded platforms. The 36 I/O pins make the device practical for systems combining digital inputs, output control, communication signaling, and status indication without requiring a larger package. Designers should verify oscillator, reset, timing, and interrupt assignments against the manufacturer datasheet before laying out the PCB. Because the 8051 architecture is memory-constrained, firmware should avoid unnecessary library overhead and preserve stack space for interrupt service routines. The 44-pin BQFP footprint also requires adequate clearance for fine-pitch routing and careful assembly inspection. This product page consolidates the confirmed architecture, memory, speed, pin-count, package, lifecycle, sourcing, and cross-reference information for the W78E054B40FL. It also highlights the engineering constraints engineers should evaluate when planning a replacement, including memory capacity, timing, package compatibility, pin behavior, firmware dependencies, and legacy-production risk.

RFQ צור קשר
W78E054B40PL - 40MHz 8051 Flash Microcontroller | Nuvoton
W78E054B40PL

W78E054B40PL - 40MHz 8051 Flash Microcontroller | Nuvoton

Nuvoton Technology Corporation W78E054B40PL is an 8-bit W78-series 8051-compatible flash microcontroller operating at up to 40 MHz, with 16 KB of program Flash, 256 bytes of RAM, and 36 general-purpose I/O pins in a 44-pin PLCC package. It combines a CISC processor core with internal oscillator options and a 5 V supply requirement for compact embedded-control designs. An 8051-compatible microcontroller is an embedded processing IC that executes firmware from internal Flash, accesses data through internal RAM, and controls external hardware through digital I/O. The W78 family belongs to the broader 8-bit microcontroller hierarchy, combining a small instruction set, dedicated timer and serial-control resources, and flexible embedded peripherals in a low-cost device suitable for industrial controllers, appliances, and compact automation equipment. The W78E054B40PL provides 16 KB, or 16K x 8 bits, of Flash program memory and 256 x 8 bits of RAM. Its maximum clock frequency is 40 MHz, while its 36 available I/O lines support digital inputs, outputs, and multiplexed peripheral functions. The device is offered in a 44-pin PLCC package, a leaded surface-mount format suited to legacy industrial and control boards that use plated-chip carriers rather than modern fine-pitch packages. The W78 architecture uses an 8-bit CISC processing model and an oscillator arrangement that allows clock selection suitable for embedded timing requirements. A 40 MHz operating rate gives designers more instruction throughput than conventional low-speed 8051 devices while retaining software compatibility with the established 8051 programming model. Its integrated Flash also eliminates the need for an external program-memory device in firmware-intensive control products. Typical uses include small industrial controllers, temperature and appliance controls, digital timers, sensor-conditioning systems, and equipment-control panels where a dedicated 8-bit processor is sufficient. The device can also serve as a peripheral controller in larger assemblies when the host system requires deterministic digital I/O and local firmware rather than a high-performance processor with a large memory footprint. When designing a new board around the W78E054B40PL, verify the clock source, reset behavior, port multiplexing, and programming interface against the manufacturer datasheet before assigning external functions. Because the PLCC package is no longer common in new compact products, confirm connector availability and assembly-process compatibility early in the mechanical design phase. This page combines the W78E054B40PL electrical identity, package details, application guidance, design cautions, and substitution limitations to support faster engineering review. It also distinguishes verified device characteristics from parameters that require confirmation from the complete manufacturer documentation.

RFQ צור קשר
W78E054C40DL - 40MHz 8-Bit 16KB MCU | Nuvoton | DIP-40
W78E054C40DL

W78E054C40DL - 40MHz 8-Bit 16KB MCU | Nuvoton | DIP-40

Nuvoton Technology Corporation W78E054C40DL is an 8-bit 8051-class microcontroller with 16KB of program Flash, 256 x 8 bits of RAM, 32 I/O pins, and a 40MHz maximum operating speed. The device is packaged in a 40-pin DIP through-hole package. These characteristics position it as a general-purpose embedded controller for legacy-compatible industrial control, appliance, instrumentation, and educational designs. An 8051 microcontroller is an embedded semiconductor that integrates a CPU, program memory, data memory, I/O ports, timers, and interrupt logic on one device. The W78E054C40DL belongs to the broader 8-bit microcontroller hierarchy, where the 8051 instruction set remains widely supported by compilers, development tools, and established control-code libraries. It is intended to execute embedded tasks rather than general-purpose desktop or server workloads. The main features of the W78E054C40DL include 16KB (16K x 8) of Flash program memory, 256 x 8 bits of RAM, 32 I/O pins, and operation up to 40MHz. Its DIP-40 package supports through-hole assembly and is convenient for prototyping, educational kits, and industrial controller boards that retain conventional 40-pin MCU layouts. The 32-bit I/O count in the product description refers to the available digital I/O resources reported for the device. The device uses the established 8-bit 8051 architecture rather than a 32-bit processor core. This architecture favors simple peripherals, deterministic control loops, and low-cost embedded implementations over maximum computational throughput. Because the W78E054C40DL is clocked as high as 40MHz, timing-critical tasks can be scheduled with substantially more instruction throughput than a conventional 12MHz or 24MHz 8051 implementation, subject to the operating limits in the manufacturer datasheet. Typical applications include industrial control panels, motor and relay sequencing, temperature-instrumentation interfaces, appliance controllers, LED systems, and programmable logic controllers. It is also suitable for legacy equipment where replacing an existing DIP-40 8051 controller is more practical than redesigning around a smaller surface-mount microcontroller. When designing around the W78E054C40DL, use the pin-description table and electrical characteristics in the Nuvoton W78E54C/W78E054C datasheet when assigning the 40 DIP pins. Confirm oscillator, reset, supply-voltage, timing, and programming requirements before finalizing the schematic. Software development also requires a toolchain and programming method compatible with the W78E054C device family. This product page consolidates the verified 40MHz speed, 16KB Flash capacity, 256-byte RAM, 32 I/O count, and DIP-40 package details, then adds practical selection guidance, comparison parameters, and engineering-focused design notes for engineers evaluating an 8-bit embedded replacement.

RFQ צור קשר
W78E054C40FL - 40MHz 8-Bit 16KB 8051 MCU | Nuvoton
W78E054C40FL

W78E054C40FL - 40MHz 8-Bit 16KB 8051 MCU | Nuvoton

The Nuvoton Technology Corporation W78E054C40FL is an 8-bit 8051-compatible microcontroller operating at 40 MHz, with 16 KB of flash program memory, 256 bytes of RAM, and 36 I/O pins in a 44-pin QFP package. It combines the processing core, program memory, data memory, and digital I/O in one surface-mount device for compact embedded control systems. An 8051-compatible microcontroller is an embedded processing IC designed around the established 8051 instruction set and peripheral architecture. In the product hierarchy, it belongs to the MCU class, which extends the general-purpose microprocessor with embedded flash memory, RAM, I/O, timers, and communication resources. This integration reduces external component count while giving designers a defined platform for firmware development and control-system upgrades. The W78E054C40FL combines a 40 MHz maximum operating frequency with 16 KB (16K x 8) of flash program memory and 256 x 8 bits of data RAM. Its 36 I/O pins provide substantial parallel-interface capacity for switches, indicators, sensors, actuators, and external control logic. The 44-pin QFP package supports compact, high-pin-count PCB layouts while remaining compatible with conventional surface-mount assembly. At the architecture level, the device combines an 8-bit CPU with 16 KB of nonvolatile program storage and 256 bytes of volatile data storage. Flash memory allows firmware to remain resident across power cycles, while RAM supports working variables, stack operations, and intermediate control calculations. The 40 MHz clock rating provides additional timing headroom for interrupt-driven routines, peripheral servicing, and communication tasks compared with lower-clock 8051 implementations. Typical uses include industrial machine controls, building equipment, appliance controllers, compact data-acquisition modules, embedded interface boards, and products being migrated from discrete 8051 designs. A 36-I/O device is particularly useful when a design needs multiple digital connections but does not require a larger, higher-cost microcontroller package. When laying out the PCB, place decoupling capacitors close to the supply and ground pins, preserve the manufacturer's recommended clock and reset connections, and route sensitive inputs away from high-current switching nodes. Firmware development should also account for the 256-byte RAM limit by controlling stack depth and avoiding unnecessarily large buffers. This product page combines the exact W78E054C40FL operating specifications, application guidance, design considerations, and verified drop-in replacement research. It also distinguishes the 16 KB flash, 256-byte RAM, 36-I/O, and 40 MHz design limits that determine whether this 8051 MCU is appropriate for a new embedded-control design.

RFQ צור קשר
W78E054C40PL 40MHz 8051 16KB Flash MCU | Nuvoton
W78E054C40PL

W78E054C40PL 40MHz 8051 16KB Flash MCU | Nuvoton

The Nuvoton Technology Corporation W78E054C40PL is an 8-bit W78 series microcontroller with a 40 MHz maximum operating frequency, 16 KB of Flash EPROM, 256 bytes of RAM, and 36 I/O lines in a 44-pin PLCC package. Its instruction set is compatible with the standard 8051, allowing standard 8051 application code and development techniques to be reused in compact embedded control systems. An 8051-compatible microcontroller is an embedded processor that combines a CPU core, program memory, data memory, I/O ports, timers, and serial communication in one integrated circuit. The W78E054C belongs to the broader hierarchy of 8-bit MCU, microprocessor, embedded controller, and semiconductor. Its combination of Flash memory, multiple I/O ports, timers, watchdog protection, and serial communication makes it suitable for compact control, monitoring, and data-acquisition equipment. The device provides four 8-bit bidirectional, bit-addressable I/O ports and an additional 4-bit I/O port identified as P4. It also includes three 16-bit timer/counters, a hardware watchdog timer, and a serial port. These resources allow a designer to connect digital inputs and outputs, generate timing signals, measure events, and communicate with external equipment without requiring a separate collection of peripheral devices. The W78E054C instruction set is fully compatible with the standard 8051, but the operating range and integrated Flash EPROM make this device more useful for modern embedded designs than the original MCS-51 architecture. Its 16 KB program-memory capacity is suitable for control firmware, while the 256-byte RAM supports working variables, stack operations, buffers, and communication state. The 40 MHz operating specification supports faster execution than standard-speed 8051 implementations while retaining software compatibility. Typical uses include industrial equipment interfaces, appliance controllers, instrument panels, embedded timers, serial-connected control modules, and compact control boards. The 44-pin PLCC package provides more I/O and clock-related pins than compact leaded packages and is useful when a design needs several parallel digital lines. Designers should confirm the complete pin description, oscillator requirements, reset behavior, and electrical limits in the manufacturer datasheet before laying out a new board. The most important design consideration is to follow the datasheet pin and connection guidance exactly, particularly for the oscillator, reset, supply, and I/O pins. Keep power and ground connections short, provide the specified decoupling arrangement, and route high-current outputs away from sensitive clock and reset traces. Firmware should also use the watchdog timer and the device’s timer resources to improve fault recovery and deterministic control behavior. This product page consolidates the device’s published architecture, memory, speed, I/O, package, and interface characteristics with application guidance, comparison criteria, and practical design notes. It helps engineers identify whether the 8051-compatible instruction set, 40 MHz performance, Flash memory, and 36 I/O lines fit a specific embedded-control design without changing the MCU architecture.

RFQ צור קשר
W78E054DDG - 8-Bit 40MHz 16KB Flash MCU | Nuvoton
W78E054DDG

W78E054DDG - 8-Bit 40MHz 16KB Flash MCU | Nuvoton

Nuvoton W78E054DDG is an 8-bit 8052-compatible microcontroller rated up to 40 MHz, with 16 KB of Flash program memory and operating from 2.4 V to 5.5 V. The device is supplied in an LQFP-48 package and is positioned for embedded security, alarm, barcode-reader, KVM, key-phone, user-interface, and industrial-control systems. Its 32 I/O pins provide a practical interface count for digital control and communication designs. An 8-bit microcontroller is a compact embedded-processing IC built around an 8-bit CPU, program memory, data memory, timers, serial interfaces, and digital I/O. The W78E054D belongs to the broader 8051/8052 microcontroller family and combines legacy peripheral compatibility with a wider operating-frequency range. Its selectable 6T or 12T architecture is designed to support traditional 12T 8051-compatible hardware while accommodating higher clock rates. Principal device characteristics include a 40 MHz maximum operating frequency, 16 KB of Flash program memory, 32 I/O pins, a 2.4 V to 5.5 V supply range, and an external oscillator configuration. Flash memory retains programmed firmware without a removable programmer, while the broad supply-voltage range supports both 3.3 V and 5 V equipment when the associated peripheral and I/O limits are respected. The W78E054D uses the 8052 processor architecture and provides a conventional register-based embedded-control platform. Nuvoton describes the family as configurable and pin-compatible with traditional 12T 8051 implementations. That compatibility makes migration from an appropriately designed 8051 system possible, although firmware, timing, oscillator, and peripheral behavior should still be verified before production use. Typical applications include electronic access controls, alarm panels, barcode readers, keyboard-video-mouse equipment, key-phone systems, industrial human-interface panels, and embedded industrial controllers. The 32 available I/O pins are especially useful when a design must combine sensing inputs, relay or actuator outputs, display interfaces, and serial communication without using a larger package. The principal engineering consideration is that this device has an external oscillator rather than a listed internal oscillator. The clock source, capacitance, startup behavior, and all timing-dependent firmware must therefore be designed for the external clock configuration. Designers should also confirm the exact LQFP-48 pin mapping and the latest Nuvoton datasheet before committing a new PCB. This product page combines verified distributor pricing, lifecycle information, package characteristics, and application guidance with explicit identification of the remaining pinout and supply-chain details. It also distinguishes confirmed drop-in replacements from related family members that were not verified as exact replacements, helping engineers avoid assumptions based only on similar part numbers.

RFQ צור קשר
W78E054DFG - 40MHz 8-Bit 8051 MCU | Nuvoton | 16KB Flash
W78E054DFG

W78E054DFG - 40MHz 8-Bit 8051 MCU | Nuvoton | 16KB Flash

Nuvoton Technology Corporation W78E054DFG is an 8-bit 8051-compatible microcontroller operating at up to 40 MHz, with 16 KB of internal flash memory and a 44-pin PQFP package. It supports a 2.4 V to 5.5 V operating-voltage range and an industrial temperature range of -40°C to 85°C. The W78E054D family combines a traditional 8051 core with modern embedded-control functionality for security, alarm, barcode-reader, KVM, keypad, user-interface, and IPC equipment. An 8-bit 8051 microcontroller is an embedded-processing IC built around the 8051 instruction set and a compact register and memory architecture. Within the semiconductor hierarchy, it belongs to the microcontroller category, combining a CPU core, program memory, data memory, timers, serial interfaces, and interrupt-control resources on one integrated circuit. The W78E054D is marketed as a 6T or 12T 8051 MCU that is configurable and pin-compatible with traditional 12T 8051 designs. Key characteristics include an 8-bit processing engine, a maximum clock frequency of 40 MHz, and 16 KB of flash memory organized as 16K by 8 bits. Its operating range of 2.4 V to 5.5 V allows use in both 3.3 V and 5 V equipment. The 44-pin PQFP package provides a surface-mount option for compact control boards, while the -40°C to 85°C rating supports industrial-temperature deployments. The W78E054D/W78E052D series is designed to accommodate a wider frequency range with low power consumption. Its 8051-compatible architecture supports familiar instruction set and peripheral conventions, easing firmware migration from suitable legacy 8051 products. Because it is specified as configurable and pin-compatible with traditional 12T 8051 devices, board-level compatibility depends on the selected package suffix, oscillator implementation, reset circuitry, and the exact functions assigned to shared pins. Typical applications include electronic security systems, alarm panels, barcode readers, KVM controllers, industrial telephones, compact human-machine interfaces, and embedded IPC equipment. These systems benefit from the combination of 16 KB flash, 40 MHz processing capability, and a 2.4 V to 5.5 V supply range. The 44-pin PQFP format is particularly appropriate for volume-produced industrial and commercial control products that require a surface-mount assembly process. Designers should verify oscillator, reset, and peripheral connections directly against the manufacturer datasheet before replacing an existing 12T 8051. The W78E054 family is pin-compatible with traditional 12T devices when the corresponding configuration and package are used, but firmware, memory, timing, and peripheral availability must also be reviewed. The W78E054D is currently marked Not Recommended for New Designs, so existing-product maintenance may be more appropriate than new platform selection. This page combines verified manufacturer and distributor information with lifecycle context, application guidance, package constraints, and a strictly filtered drop-in comparison. It distinguishes confirmed W78E054D attributes from parameters that remain unavailable in the supplied source data, helping engineers evaluate procurement and redesign decisions without treating generic 8051 specifications as guaranteed W78E054DFG facts.

RFQ צור קשר
W78E054DLG - 40MHz 8052 8-Bit 16KB MCU | Nuvoton | LQFP-48
W78E054DLG

W78E054DLG - 40MHz 8052 8-Bit 16KB MCU | Nuvoton | LQFP-48

Nuvoton Technology Corporation W78E054DLG is an 8-bit 8052-compatible microcontroller operating up to 40 MHz, with 16 KB of flash memory and a 48-pin LQFP package. The verified listing specifies a 2.4 V to 5.5 V operating range, a -40 °C to 70 °C temperature range, Pb-free construction, and an 8052 instruction set. These characteristics place the W78E054DLG in the broader 8-bit embedded-control MCU category, where on-chip flash, digital I/O, timing resources, and serial peripherals are combined for compact control designs. An 8-bit microcontroller is a microprocessor core designed primarily for embedded control rather than desktop computing. The W78E054D/W78E052D family extends the 8052 architecture to higher operating frequencies and provides integrated program memory for standalone applications. At up to 40 MHz, the device is suitable for systems requiring fast deterministic I/O handling while remaining manageable in an 8-bit software ecosystem. Its 48-LQFP package exposes substantially more I/O than smaller packages while remaining compatible with automated PCB assembly. The verified features emphasize a 16 KB flash program-memory capacity, 40 MHz maximum clock operation, and a broad 2.4 V to 5.5 V supply range. The 2.4 V minimum operating voltage supports low-voltage designs, while the upper limit allows operation from conventional 5 V systems. The stated -40 °C to 70 °C commercial temperature range supports industrial equipment, instrumentation, appliances, access controls, and compact controller modules that do not require the wider temperature limits associated with extended-temperature components. As an 8052-compatible device, the W78E054DLG can execute standard 8051-family instructions while benefiting from the faster clock and denser flash implementation in this family. The verified data identifies the device as a 16K × 8 flash MCU, providing 16,384 bytes of program storage. Detailed RAM organization, interrupt-vector arrangement, peripheral configuration, oscillator requirements, and electrical timing values are not included in the supplied excerpts and should be confirmed against the manufacturer datasheet before schematic or firmware release. Typical application areas include small industrial controllers, sensor-conditioning and data-acquisition modules, motor and relay control, security and access-control equipment, and consumer appliances. Its 48-LQFP footprint is particularly useful when a design needs more external connections than a small-outline microcontroller can provide. In each case, firmware must account for the device's 8-bit architecture and peripheral assignment shown in the authoritative pinout and reference manual. A critical design step is to verify every power, clock, reset, and I/O connection against the official W78E054D/W78E052D datasheet before PCB layout. The supplied search excerpts do not expose the complete pin names, exposed-pad arrangement, decoupling requirements, or recommended external components. Engineers should also confirm the oscillator source, programming interface, reset strategy, unused-pin treatment, and operating voltage tolerance for the assembled production configuration. This product record consolidates verified distributor pricing, package information, operating limits, and sourcing links into one engineering reference. It also separates confirmed parameters from missing datasheet details, helping designers avoid assumptions about pin compatibility, replacement parts, memory availability, or peripheral behavior while preserving traceability to current market data.

RFQ צור קשר
W78E054DPG - 8-Bit 40MHz 8051 MCU | Nuvoton
W78E054DPG

W78E054DPG - 8-Bit 40MHz 8051 MCU | Nuvoton

The Nuvoton Technology Corporation W78E054DPG is an 8-bit W78 8052-compatible microcontroller with 16KB (16K x 8) Flash program memory, 256 x 8 bits of RAM, 36 I/O pins, and a maximum operating frequency of 40MHz. The device is supplied in a 44-pin PLCC package and operates from 2.4V to 5.5V over a -40°C to +85°C temperature range. An 8-bit microcontroller is a compact embedded-control processor designed to execute firmware, read inputs, and control outputs in equipment such as security systems, barcode readers, industrial controllers, user interfaces, and communication products. Within the semiconductor hierarchy, the W78E054DPG belongs to the 8051-compatible MCU family, combining a CISC instruction set with integrated program memory, data memory, timers, serial interfaces, and parallel I/O. The W78E054DPG provides 16KB of Flash memory for firmware storage and 256 x 8 bits of RAM for working data. Its 36 available I/O lines support external sensors, switches, indicators, actuators, and peripheral interfaces. The configurable 6T/12T architecture and external oscillator provide flexibility for designs based on the traditional 12T 8051 interface. Operation across 2.4V to 5.5V also accommodates legacy 2.5V, 3.3V, and 5V system environments. The maximum clock frequency of 40MHz makes the device suitable for control tasks that require deterministic embedded processing without a higher-cost application processor. Its 8052-compatible architecture supports established 8051 development methods, while the integrated Flash memory permits field-programmable firmware rather than a mask-programmed ROM implementation. The PLCC-44 package is intended for socketed or board-level assembly where serviceability and a compact leaded footprint are important. Typical applications include alarm and security panels, barcode-reader interfaces, keyboard and telephone equipment, kiosk and user-interface controllers, industrial peripherals, and compact embedded IPC systems. For these uses, the combination of 36 I/O pins, 16KB Flash, 256 x 8-bit RAM, and 2.4V to 5.5V operation provides sufficient resources for supervisory control, protocol handling, and peripheral coordination. Designers should verify oscillator, reset, and memory-interface requirements against the manufacturer datasheet before layout. Because the product is classified Not Recommended for New Designs, existing equipment maintenance can justify sourcing this NRND device, but new platforms should assess currently supported Nuvoton MCU families rather than assuming long-term availability. This product record combines manufacturer lifecycle information, distributor specifications, packaging data, and application-focused engineering guidance. It also distinguishes verified source data from unavailable commercial information, making the W78E054DPG easier to evaluate for legacy-system maintenance without presenting unverified pricing, pin assignments, or replacement claims as facts.

RFQ צור קשר
W78E058DDG - 8-Bit 40MHz 32KB Flash MCU | Nuvoton | DIP-40
W78E058DDG

W78E058DDG - 8-Bit 40MHz 32KB Flash MCU | Nuvoton | DIP-40

Nuvoton Technology Corporation W78E058DDG is an 8-bit W78 8051-compatible microcontroller with 40 MHz operating frequency, 32 KB of flash program memory, 512 bytes of RAM, and 36 I/O pins in a 40-pin DIP package. The device is designed for embedded control applications requiring a familiar 8051 instruction set, integrated flash memory, and operation from a 2.4 V to 5.5 V supply range. Its 40-pin DIP construction supports prototyping, legacy-controller upgrades, and through-hole industrial control assemblies. An 8051-compatible microcontroller is an embedded-processing IC built around the classic 8051 core architecture. It combines a CPU, program memory, data memory, parallel I/O, timers, serial communication functions, and interrupt support on one device. The W78E058 series extends that established platform with on-chip flash rather than relying on an external program-memory device. Within the semiconductor hierarchy, this part belongs to the microcontroller class and the more specific 8-bit embedded-controller category. The principal features include 32 KB (32K × 8) flash, 512 × 8 bits of RAM, 36 I/O pins, and a maximum stated operating frequency of 40 MHz. The 2.4 V to 5.5 V operating range permits use in 2.5 V, 3.3 V, and 5 V equipment. According to the manufacturer W78E058D product information, the family is configurable and pin-compatible with traditional 12-transistor 8051 devices, while package options include DIP40. The selected W78E058DDG ordering code corresponds to the 40-pin DIP configuration. Internally, the MCU follows the CISC-oriented 8051 execution model and uses a W78 core with integrated flash program storage. The 40 MHz clock rating provides substantially more timing headroom than traditional 12 MHz-class 8051 implementations, supporting faster peripheral operation and more demanding control loops. Because interrupt-driven and polling architectures remain central to 8051 designs, existing toolchains and software practices can often be adapted, although the W78E058D documentation must be consulted for peripheral behavior and clock requirements. Typical uses include industrial controller boards, appliance control panels, keyboard and human-interface modules, programmable timers, data-acquisition controllers, and legacy peripheral upgrades. The 36 available I/O pins are especially useful when a system needs multiple digital inputs and outputs around a single controller. For designs requiring more analog functions, communication nodes, or compact surface-mount packaging, a different microcontroller family may provide a better integration level. When designing a PCB around the W78E058DDG, preserve the documented 40-pin DIP footprint and provide suitable bypass capacitance at the power pins. Validate oscillator timing, reset behavior, and I/O drive limits against the manufacturer datasheet before production. Migration from a conventional EPROM-based 8051 should also include checks for flash-specific programming, erase, and code-execution behavior. This product page consolidates verified distributor specifications, manufacturer family information, package constraints, and practical design guidance. It also distinguishes a genuine 40-pin drop-in option from candidates whose memory, speed, or package differences require schematic and firmware verification before substitution.

RFQ צור קשר
W78E058DFG - 8-Bit 40MHz 32KB Flash MCU | Nuvoton
W78E058DFG

W78E058DFG - 8-Bit 40MHz 32KB Flash MCU | Nuvoton

The Nuvoton Technology Corporation W78E058DFG is an 8-bit 8052-compatible W78 microcontroller with a 40 MHz maximum speed and 32 KB of flash program memory in a 44-pin PQFP package. It operates from 2.4 V to 5.5 V, providing a broad supply-voltage range for embedded industrial control, IoT equipment, automation, motor-control, metering, and low-power board designs. The device also provides 512 bytes of RAM and 36 I/O pins according to the verified technical listing. An 8-bit microcontroller is a compact embedded processor designed to execute firmware that senses inputs, controls outputs, and manages communication or timing tasks. The W78E058DFG belongs to the W78 8051-family hierarchy, where the 8052 CPU combines an 8-bit CISC architecture with integrated program memory, RAM, and peripheral functions. This places it between general-purpose microcontrollers and simple fixed-function controllers for designs requiring flexible firmware-based behavior. The primary verified features are 32 KB of flash program memory, 512 bytes of internal RAM, a 40 MHz operating speed, 36 I/O pins, and a 2.4 V to 5.5 V supply range. Its 44-pin PQFP form factor supports conventional leaded-board assembly and provides more connection positions than smaller 8-bit packages. The W78E058D family is also described by Nuvoton as configurable and pin-compatible with traditional 12T 8051 designs, making the device relevant to legacy 8051 board upgrades when the electrical and peripheral requirements are matched. The W78E058D family uses an 80C51-compatible CISC architecture. Program storage in flash supports firmware revision and configuration tasks that are more difficult with mask-programmed devices, while 512 bytes of RAM support working variables, stack operations, and small data buffers. A 40 MHz clock rating provides additional timing headroom for multi-step serial communication, control loops, and periodic peripheral servicing, although actual throughput depends on the instruction mix and firmware implementation. Typical application areas include industrial controllers, connected sensing equipment, compact automation controllers, motor-control interfaces, utility or product metering, and embedded IoT nodes. The 36 available I/O positions are particularly useful when a system needs discrete sensing and actuator connections in addition to its serial interfaces. Firmware and peripheral configuration should be checked against the selected W78E058D package variant before design release. For hardware design, use the 44-pin PQFP land pattern, validate the selected oscillator and reset implementation against the manufacturer datasheet, and place bypass capacitors close to the supply pins. The permitted operating range of 2.4 V to 5.5 V must also be checked for every attached peripheral and communication device. The supplied search results do not expose the complete pin map, so pin assignments should not be inferred from generic 8051 diagrams without cross-checking the official data.

RFQ צור קשר
W78E058DLG - 8-Bit 40MHz 32KB Flash MCU | Nuvoton
W78E058DLG

W78E058DLG - 8-Bit 40MHz 32KB Flash MCU | Nuvoton

Nuvoton Technology Corporation W78E058DLG is an 8-bit 8051-compatible microcontroller operating from 2.4 V to 5.5 V, with a 40 MHz clock, 32 KB of Flash memory, and a 48-pin LQFP package measuring 7 mm by 7 mm. The distributor data identifies this device as a Pb-free part associated with the W78E058 series and an operating temperature range of -40 °C to 70 °C. An 8-bit microcontroller is a compact embedded-control IC used to execute firmware, read inputs, control outputs, and coordinate peripheral functions. In the product hierarchy, the W78E058DLG is a microcontroller, a programmable semiconductor, and a member of Nuvoton's 8051-family devices. Its 40 MHz operating clock provides the execution rate for embedded control tasks, while its 32 KB Flash memory provides nonvolatile program storage for application firmware. The principal verified characteristics are the 8-bit CPU architecture, 40 MHz maximum clock, 32 KB Flash configuration, 512-byte Flash information area reported by LCSC, 2.4 V to 5.5 V supply range, and 48-LQFP package. These parameters position the device for compact embedded systems operating from conventional 5 V supply rails or lower-voltage circuitry within the stated range. The supplied distributor records do not expose detailed RAM size, peripheral configuration, timer channels, ADC characteristics, or package pin assignments. The W78E058DLG combines embedded processing and Flash program storage in a surface-mount LQFP-48 format. Its 7 mm by 7 mm body provides a mechanically manageable option for leaded through-hole assembly where a QFN package would be unsuitable. At 40 MHz, the device offers substantially more timing headroom than legacy 8051 systems commonly clocked at much lower frequencies, although actual response time still depends on the instruction mix and firmware workload. Typical engineering uses include compact industrial controllers, appliance-control modules, motor-control peripherals, data-acquisition front ends, and embedded sensor interfaces when the selected firmware and external circuitry match the device's documented resources. The 5.5 V maximum supply supports conventional industrial and consumer logic environments, while the 2.4 V minimum allows operation from suitably regulated lower-voltage rails. Design work should begin by confirming every required peripheral, memory resource, and package pin against the manufacturer datasheet before schematic capture. Designers should not infer ADC, timer, serial-interface, or GPIO capabilities from the family name alone because those details were not present in the supplied verified data. The 48-pin LQFP footprint also requires adequate routing space around all leads and appropriate solder-assembly profile control. This page consolidates the exact distributor-reported W78E058DLG specifications, current pricing evidence, sourcing links, and replacement-status information. It also separates verified facts from unresolved attributes, helping engineers avoid treating distributor snippets as a substitute for the complete manufacturer datasheet when making PCB or firmware decisions.

RFQ צור קשר
W78E058DPG - 8-Bit 40MHz 32KB Flash MCU | Nuvoton | PLCC-44
W78E058DPG

W78E058DPG - 8-Bit 40MHz 32KB Flash MCU | Nuvoton | PLCC-44

Nuvoton W78E058DPG is an 8-bit 8052-compatible W78 microcontroller with a 40 MHz maximum operating frequency, 32 KB (32K x 8) Flash program memory, 512 x 8 bits of RAM, and 36 I/O pins in a 44-pin PLCC package. It operates across a 2.4 V to 5.5 V supply range and is specified for -40°C to +85°C industrial-temperature applications. The device is currently Not Recommended for New Designs, so engineers should confirm availability, longevity, and any program-memory compatibility requirements before starting a new design. An 8052-compatible MCU is an embedded microcontroller built around the established 8-bit 8051/8052 instruction-set architecture. Within the product hierarchy, the W78E058D belongs to the Nuvoton 8-bit 8051 MCU family and combines a 6T/12T configurable core with Flash program memory. This architecture is appropriate for compact control systems that need deterministic control logic, moderate processing capacity, and broad peripheral integration without the cost or complexity of a higher-bit MCU. The principal device parameters include an 8-bit architecture, 40 MHz operating speed, 32 KB Flash memory, 512 bytes of RAM, 36 I/O pins, and a 44-pin PLCC package. According to Nuvoton product information, the W78E058D family is configurable and pin-compatible with traditional 12T 8051 devices. Its operating range of 2.4 V to 5.5 V also supports both lower-voltage and legacy 5 V equipment designs. The W78E058D family combines Flash program memory with an 8052-compatible core and is positioned for embedded controls including security and alarm equipment, barcode readers, KVM equipment, key phones, user interfaces, and industrial control products. The 36 available I/O pins provide substantial peripheral connectivity for sensors, displays, communication interfaces, and discrete control signals while retaining the familiar 8051 software ecosystem. For new designs, NRND status is the primary selection consideration. An existing product using the W78E058DPG can generally be maintained when its electrical, memory, timing, and software requirements remain unchanged, but designers should evaluate an active Nuvoton MCU or another currently supported platform when beginning a new production program. A firmware migration is not necessarily required for an identical device, although peripheral changes, memory layout, timing, and package differences require careful review. When laying out a 44-pin PLCC design, preserve the component's specified pin arrangement and provide suitable bypass capacitance and signal-integrity routing for external clock, reset, and I/O signals. Socketed PLCC assemblies may be convenient for prototypes or service programs, whereas exposed-pad leaded PLCC packages generally require inspection for solder-joint reliability after rework. The manufacturer's datasheet remains the controlling reference for pin names, electrical limits, and programming details. This product page consolidates verified manufacturer and distributor information, operating limits, package data, pricing availability status, and a documented drop-in comparison for the verified W78E058B40PL candidate. Unlike a raw distributor listing, it also distinguishes a confirmed pin-compatible replacement from unverified catalog recommendations and identifies where additional engineering validation is still required.

RFQ צור קשר
W78E365A40DL - 8-Bit 40MHz 64KB Flash MCU | Nuvoton
W78E365A40DL

W78E365A40DL - 8-Bit 40MHz 64KB Flash MCU | Nuvoton

Nuvoton Technology Corporation W78E365A40DL is an 8-bit W78 8051-compatible CMOS microcontroller with a 40 MHz maximum clock, 64KB of Flash program memory, 1.25KB of RAM, and 32 I/O pins in a 40-pin PDIP package. It is designed for embedded control applications that require flash-based firmware storage, broad digital I/O, and an established 8051-compatible software environment. An 8-bit microcontroller is a compact computing device that integrates a CPU, program memory, data memory, timers, serial interfaces, and parallel I/O on one integrated circuit. Within the product hierarchy, the W78E365A40DL is an 8-bit MCU, then a W78-series microcontroller, then an 8051-compatible controller, and finally a general-purpose embedded processor. This family is commonly used for cost-sensitive products where deterministic control and compact firmware are more important than high arithmetic throughput. The W78E365A40DL combines 64KB of Flash program memory with 1.25KB of on-chip RAM and 32 I/O pins. Its operating frequency reaches 40 MHz, allowing faster instruction execution than lower-speed 8051 derivatives. The internal oscillator, 5 V supply description, and through-hole PDIP format are useful for industrial controllers, appliance controls, meters, and legacy 8051 equipment. A tube package also supports prototype and manual-production workflows. The W78E core follows an 8-bit CISC architecture associated with the 8051 instruction set. Flash memory permits field reprogramming without removing the microcontroller from its socket, while the 32 available I/O pins support digital inputs, outputs, and externally interfaced peripherals. Designers should confirm each peripheral’s alternate-pin function, reset requirements, oscillator connections, and available port behavior against the Nuvoton W78E365A40DL datasheet before finalizing the board. Typical uses include industrial sequence controllers, timer-based appliances, digital signal input modules, keypad interfaces, and small motor or relay control panels. The 40-pin PDIP package is particularly useful where socketed components, field replacement, or through-hole serviceability are preferred. The 40 MHz clock rate also makes this device more responsive than many 8-bit MCUs operated at substantially lower frequencies. For reliable implementation, use the manufacturer’s oscillator and reset configuration, connect unused inputs to defined levels, and place decoupling capacitors close to the supply pins. Because this is a legacy-compatible 40-pin DIP microcontroller, pin-sensitive drop-in replacements should be selected only after their complete pin descriptions, memory organization, peripheral set, and electrical limits have been compared. This product page combines the manufacturer-oriented electrical identity, verified package and memory characteristics, practical legacy-control use cases, and replacement-screening guidance needed to evaluate the W78E365A40DL for an existing 8051-based design.

RFQ צור קשר
W78E365A40FL - 40MHz 8051 MCU with 64KB Flash | Nuvoton
W78E365A40FL

W78E365A40FL - 40MHz 8051 MCU with 64KB Flash | Nuvoton

Nuvoton Technology Corporation W78E365A40FL is an 8-bit 8052 CISC flash microcontroller with a 40 MHz maximum clock, 64 KB of program flash, 1.25 KB of RAM, and 36 I/O pins in a 44-pin PQFP package. The device also includes a 4 KB boot block and an internal oscillator, making it suitable for compact embedded-control designs that require moderate processing speed and integrated nonvolatile firmware storage. An 8-bit CISC microcontroller is a semiconductor controller that executes an instruction set designed around compact, cycle-efficient operations. Within the broader hierarchy of embedded processing, this device belongs to the 8051/8052 MCU family, integrates a CPU, flash memory, RAM, timers, serial interfaces, and I/O ports, and is intended for industrial control, instrumentation, appliance control, and compact embedded products. Its 40 MHz operating speed supports faster control-loop and peripheral servicing than lower-rate 8051 derivatives. The W78E365A40FL combines 64 KB of flash with a 4 KB boot block, providing 68 KB of separately organized nonvolatile memory when both regions are considered. Its 1.25 KB RAM provides working memory for variables, stack operations, and peripheral buffers. With 36 I/O pins, the device can support multiple digital interfaces and discrete control signals while retaining the external connectivity associated with a 44-pin PQFP package. The W78E365A40FL uses an 8052-compatible 8-bit CISC core, flash program memory, and an internal oscillator. The flash architecture permits firmware to be programmed or rewritten during development and production updates rather than relying on masked ROM. Its operating architecture is suited to interrupt-driven embedded systems, where timers, serial communications, and external events can coordinate real-time control functions through the microcontroller’s peripheral set. Typical applications include industrial equipment controllers, data acquisition and instrumentation modules, motor and relay-control boards, programmable logic controllers, appliance interfaces, and embedded products requiring a combination of 36 digital I/O lines and 40 MHz processing. The 44-pin PQFP footprint also supports designs that benefit from a conventional leaded package rather than a very-small-body surface-mount option. Designers should verify oscillator, reset, power, and I/O conditions against the manufacturer datasheet before committing a PCB layout. Because this is a leaded PQFP device, include adequate board spacing, inspect solder joints after assembly, and review the operating-voltage limits and decoupling requirements for the intended power environment. This product page consolidates the verified device identity, package, memory organization, interface count, and application guidance, while distinguishing confirmed characteristics from parameters that still require validation against the complete manufacturer datasheet.

RFQ צור קשר
W78E365A40PL - 8-Bit 40MHz 64KB Flash MCU | Nuvoton
W78E365A40PL

W78E365A40PL - 8-Bit 40MHz 64KB Flash MCU | Nuvoton

The Nuvoton W78E365A40PL is an 8-bit 8052-compatible microcontroller with a 40 MHz maximum speed, 64 KB of in-system programmable Flash program memory, and a 44-LCC package. It also provides 1.25 KB of RAM and 36 general-purpose I/O pins according to the published component specifications. The device is identified by DigiKey as an 8052 W78 microcontroller from Nuvoton Technology Corporation. A microcontroller is a programmable semiconductor that integrates a CPU core, program memory, data memory, and peripherals into one device. The W78E365 belongs to the 8-bit microcontroller hierarchy, uses a 8052-compatible instruction set, and is positioned for compact embedded control systems that need Flash-based firmware updating without removing the device from its circuit. Its in-system programming capability allows firmware to be updated after assembly. Key characteristics include a 40 MHz operating speed, 64 KB of Flash program memory, 1.25 KB of RAM, 36 I/O pins, an internal oscillator, and Timer 2 output capability. Mouser describes the device as having 64 KB Flash, a 4 KB boot block, and 1 KB plus 256 bytes of RAM, which supports in-system firmware update workflows. The published listing also identifies the W78E365A40PL as a lead-free device. The 44-LCC package provides 36 digital I/O pins around a relatively compact leaded footprint. This pin count suits control boards that need moderate amounts of discrete input and output while retaining a broadly available through-hole-style package. The 8052-compatible architecture also makes the device relevant to legacy 8051-family codebases where an established instruction set and peripheral arrangement are more important than a higher-bus-width processor. Typical uses include industrial control modules, appliance controllers, instrumentation interfaces, programmable logic devices, embedded timers, and compact data-acquisition or monitoring boards. A 40 MHz clock gives an 8-bit design additional instruction throughput, while the 64 KB Flash area provides practical room for boot code, application logic, and in-field update tables. When laying out a board, confirm the pin assignment and alternate-function multiplexing against the manufacturer datasheet before assigning external circuitry. Because this part is packaged in 44-LCC rather than a common small-outline package, verify connector footprint, hole pattern, and assembly thermal requirements early in the mechanical design.

RFQ צור קשר