מוצרים (46,000+)

XC7A75T-L2FGG676E - 75,520-Cell Low-Power Artix-7 FPGA
XC7A75T-L2FGG676E

XC7A75T-L2FGG676E - 75,520-Cell Low-Power Artix-7 FPGA

The AMD XC7A75T-L2FGG676E is a low-power Artix-7 field-programmable gate array with 75,520 logic cells, 300 I/O, and a 676-pin fine-pitch BGA package. It is manufactured using 28 nm CMOS technology and is identified with a 0.9 V core supply specification. The device provides programmable logic resources for cost-sensitive embedded systems requiring high integration, parallel I/O, and reconfigurable hardware. An FPGA is a programmable semiconductor whose internal logic, interconnect, and I/O blocks can be configured after manufacture. The Artix-7 family occupies the FPGA level within the broader reconfigurable-logic hierarchy and is intended for applications where programmable logic is preferable to a fixed-function ASIC. Its logic fabric combines with package I/O and dedicated configuration resources to support custom digital control, signal processing, and interface bridging. The principal verified characteristics are the 75,520-cell Artix-7 logic configuration, 300 available I/O, 28 nm CMOS process technology, 0.9 V operating voltage, and 676-pin FBGA package. The L2 ordering designation identifies the low-power Artix-7 performance option, while FGG676E identifies the 676-pin fine-pitch package and the associated ordering suffix. These attributes make the XC7A75T-L2FGG676E appropriate for designs requiring substantial parallel programmable logic without the power profile of a larger FPGA family. At the architectural level, the device belongs to the Artix-7 architecture, which combines programmable logic, block RAM, DSP resources, and general-purpose I/O in a single device. Because the same physical package can be used by closely related speed-grade and temperature-grade orderings, the XC7A75T-L2FGG676E can serve as the reference configuration for controlled alternates. Migration still requires checking the exact datasheet ordering table, voltage requirements, configuration interface, and supported temperature grade. Typical uses include industrial control, communications equipment, test and measurement systems, embedded vision, and compact data-acquisition platforms. The 300 I/O count is particularly useful for parallel sensor interfaces, control buses, high-speed data capture, and systems that need multiple external signals connected directly to programmable logic. The 676-pin package also offers substantially more connection options than a small FPGA in a leaded or lower-pin-count package. The principal design consideration is careful package planning. A 676-pin fine-pitch BGA requires a qualified multilayer PCB, appropriate escape routing, controlled-impedance design, and assembly-process compatibility. Designers should preserve the voltage rails, decoupling structure, configuration pins, clocking connections, and I/O standards of the reference design rather than treating an alternate ordering code as automatically interchangeable. This product record combines the verified device identity, package details, technology specifications, compatible Artix-7 orderings, comparison parameters, and practical PCB-planning guidance. It is intended to help engineers identify the correct low-power 75,520-cell FPGA and qualify a like-for-like replacement without overlooking package, speed-grade, or temperature-grade differences.

RFQ צור קשר
XC7K160T-1FB484I - 162240 Logic Cells Kintex-7 FPGA | AMD
XC7K160T-1FB484I

XC7K160T-1FB484I - 162240 Logic Cells Kintex-7 FPGA | AMD

The AMD XC7K160T-1FB484I is a Kintex-7 field-programmable gate array (FPGA) built on 28 nm technology, with 162240 logic cells, 285 I/O pins and a 484-ball FCBGA package. It is designed for high-performance programmable-logic systems that require substantial parallel processing, flexible interface support and deterministic configuration. The -1 speed grade is intended for general-purpose designs requiring reliable performance across industrial temperature conditions. An FPGA is a semiconductor whose logic, I/O and programmable interconnect resources are configured after manufacture. FPGA devices are placed between programmable processors and fixed-function application-specific integrated circuits: they can accelerate parallel algorithms, implement custom interfaces and consolidate multiple functions into one device. The Kintex-7 family combines high-performance programmable logic with advanced serial transceivers, memory resources and general-purpose I/O. The XC7K160T includes 162240 logic cells, 12675 logic cells and programmable blocks according to the product listing, 285 I/O pins and a 1 V core supply. The device is identified as a 484-BBGA, FCBGA package. Its extensive logic capacity makes it suitable for data acquisition, industrial control, communications, signal processing and test systems where parallel data paths or multiple independent functions must operate concurrently. The listed device belongs to the Kintex-7 product family, which is available in -3, -2, -1, -1L and -2L speed grades. The -2L versions are screened for lower maximum static power and can operate at lower core voltages for lower dynamic power than -2 devices. The XC7K160T-1FB484I uses the -1 grade designation, while its “I” suffix identifies the industrial temperature option in the manufacturer’s ordering nomenclature. Typical applications include high-speed data acquisition, industrial automation, communications infrastructure, embedded signal processing, FPGA-based accelerator boards and high-resolution control systems. The 285 available I/O pins also make the device useful for systems combining wide parallel buses with high-speed serial links. PCB implementation should preserve the exact 484-ball FCBGA footprint, power and ground distribution, decoupling, configuration interface and high-speed routing. Because the package contains many balls and a large FPGA configuration context, the layout should be reviewed against the manufacturer’s pinout, power guidance and design-assistance recommendations before fabrication. This product record combines the exact configuration, package and logic-density information with practical engineering guidance, qualified same-footprint alternatives and a parameter comparison. It is intended to accelerate component selection and board planning for engineers designing with the Kintex-7 XC7K160T platform.

RFQ צור קשר
XC7K160T-1FB676I - Kintex-7 162240-Cell FPGA | AMD
XC7K160T-1FB676I

XC7K160T-1FB676I - Kintex-7 162240-Cell FPGA | AMD

The AMD Xilinx XC7K160T-1FB676I is a Kintex-7 field-programmable gate array built on 28 nm technology, with 162,240 programmable logic cells, 400 user I/O, and a 676-ball FCBGA package. The -1 speed grade supports demanding programmable-logic, DSP, and high-speed interface designs, while the industrial-temperature suffix identifies the XC7K160T-1FB676I as an industrial configuration. Its 676-pin FCBGA package supports dense board-level integration without changing the footprint to a leaded or smaller BGA package. A Kintex-7 FPGA belongs to the programmable-logic hierarchy: field-programmable gate array, FPGA, programmable-logic device, and semiconductor. Unlike a fixed-function ASIC or microcontroller, an FPGA combines configurable logic blocks, programmable interconnects, block RAM, DSP resources, and selectable I/O standards on one device. This makes the family useful when hardware architecture must be updated after design entry, when parallel processing is required, or when product variants share a common board design. The XC7K160T combines 162,240 logic cells with 400 user I/O in the 676-BBGA FCBGA package. The 28 nm process technology supports a compact, high-performance implementation, and the listed 1 V core supply is a key constraint for power planning and configuration. The -1 speed designation places the device in the Kintex-7 performance range identified alongside the -3, -2, -1L, and -2L grades. Design engineers must treat this BGA package as a high-speed, multi-supply design rather than a simple two-rail component. Signal-integrity analysis, simultaneous switching-noise control, plane splitting, and thermal management become essential because the device concentrates many programmable and high-speed resources into one package. Configuration storage, startup sequencing, clocking, and power estimation should be evaluated together before schematic capture. Typical applications include industrial control and automation, communications infrastructure, test and measurement, high-speed signal processing, embedded imaging, and aerospace or defense systems requiring programmable logic. The 400 available I/O is particularly useful for parallel sensor acquisition, control interfaces, memory buses, clock distribution, and multiple communication links implemented in programmable logic. For a new design, use the AMD Kintex-7 data sheet and package files to establish the exact pinout, differential-pair rules, power rails, and PCB stack-up. Treat any board migration to another 676-ball package variant as requiring a formal ball-map, power, timing, and signal-integrity review rather than an assumption of interchangeability. This product record combines the verified device identity, package information, speed and temperature distinctions, same-footprint alternatives, comparison parameters, and practical FPGA design guidance to support component selection and PCB planning without relying on generic FPGA assumptions.

RFQ צור קשר
XC7K160T-1FBG484C - 162K Logic Cell Kintex-7 FPGA | AMD
XC7K160T-1FBG484C

XC7K160T-1FBG484C - 162K Logic Cell Kintex-7 FPGA | AMD

The AMD XC7K160T-1FBG484C is a Kintex-7 field-programmable gate array with 162,240 logic cells, 11,700 Kb of block RAM, and 285 user I/O in an FBG484 flip-chip BGA package. The -1 speed grade, commercial temperature designation, and 28 nm Kintex-7 architecture position this device for high-performance programmable logic, signal processing, communications, and embedded systems requiring substantial parallel processing capacity. A Kintex-7 FPGA belongs to the FPGA and CPLD product hierarchy, combining configurable logic, programmable digital signal processing, block RAM, dedicated input/output, clocking resources, and memory-mapped configuration interfaces. The Kintex-7 family extends beyond basic programmable logic by providing high-speed serial transceivers, hard memory resources, and dedicated processing blocks that can implement complete protocols, control systems, and accelerator functions in one device. The XC7K160T combines 162,240 logic cells with 11,700 Kb of block RAM, while its 285 user I/O provide substantial board-level connectivity. The device is manufactured using a 28 nm process and belongs to the Kintex-7 generation, which supports mainline connectivity including PCIe Gen3 and 10 Gigabit Ethernet. These resources are useful when a design requires parallel datapaths, protocol bridging, high-speed interfaces, or logic consolidation without using several discrete components. The FBG484 package contains 484 ball-grid positions and supports the FPGAs and CPLDs family requirement for a high-pin-count surface-mount implementation. Its ball-grid architecture accommodates numerous power, ground, configuration, clock, user I/O, and high-speed transceiver connections, but it also demands careful escape routing and multilayer PCB construction. Pin assignments, differential-pair rules, and power-decoupling requirements should be taken directly from the AMD package pinout files and the Kintex-7 family documentation. Typical applications include PCIe endpoint and interface consolidation, 10 Gigabit Ethernet control planes, industrial automation, high-speed instrumentation, communications infrastructure, radar and signal-processing systems, and accelerator logic. The large logic and RAM resources allow multiple data-processing paths to operate concurrently, while programmable I/O supports custom board-level interfaces and control functions. The principal design consideration is package complexity. A 484-ball FBG484 PCB requires careful power-plane partitioning, high-density decoupling, via-in-pad or microvia strategies where appropriate, and length-matched routing for high-speed interfaces. Designers should also account for configuration storage, clocking, startup sequencing, and thermal performance before finalizing component placement and layer count. This page combines device specifications, verified package references, same-footprint alternatives, comparison parameters, and practical PCB guidance. It is intended to accelerate engineering evaluation while keeping procurement decisions aligned with the exact XC7K160T-1FBG484C ordering code.

RFQ צור קשר
XC7K160T-1FBG484I - 162K Logic Cell Kintex-7 FPGA | AMD
XC7K160T-1FBG484I

XC7K160T-1FBG484I - 162K Logic Cell Kintex-7 FPGA | AMD

The AMD XC7K160T-1FBG484I is a Kintex-7 field-programmable gate array with 162,240 logic cells, 185 I/O sites, and a 484-ball FCBGA package. It combines programmable logic, DSP resources, block RAM, programmable clocking, and high-speed connectivity in a single 28 nm FPGA. The -1 speed grade targets designs that require a balance of performance and power efficiency, while the industrial-temperature suffix supports extended industrial operating requirements. A field-programmable gate array is a semiconductor whose digital behavior is configured after fabrication. Within the product hierarchy, an FPGA is a programmable logic device, a semiconductor, and a configurable alternative to a fixed-function ASIC. Kintex-7 devices combine this flexibility with dedicated resources for parallel processing, embedded memory, clock management, and external interfaces, making them suitable for systems whose algorithms, interface requirements, or product revisions are not yet fully fixed. The XC7K160T-1FBG484I provides 162,240 logic cells in a 484-ball FCBGA package with 185 I/O. Its architecture supports features identified for the Kintex-7 family, including MMCM and PLL clocking, DSP48 processing, PCIe Gen3 connectivity, and 10-gigabit Ethernet support. The 484-ball package provides a substantial pin and power-distribution interface for designs combining wide external buses, high-speed serial links, multiple clock domains, and dedicated application-specific logic. For clocked systems, the FPGA includes dedicated clock-management resources rather than requiring every global clock or PLL function to be implemented with general-purpose logic. The MMCM and PLL resources can support clock generation, phase shifting, frequency generation, and jitter-control functions within the limits defined by the product documentation. Designers should still use the clocking guidance and timing constraints in the Kintex-7 documentation when constraining generated clocks and establishing board-level timing budgets. Typical applications include industrial control and automation, high-performance signal processing, data acquisition, telecommunications infrastructure, network interface equipment, and embedded systems requiring high-speed serial connectivity. The 185 available I/O sites support parallel external interfaces, while the programmable DSP and logic resources can accelerate filtering, correlation, encoding, control loops, and other data-intensive operations. The package is also suitable for systems needing substantial general-purpose parallelism without committing to a fixed-function ASIC. Board design must treat the FCBGA package as a demanding high-density layout. Follow the AMD package pinout files and the power, decoupling, and thermal guidance in the Kintex-7 documentation. Confirm every ball assignment against the exact XC7K160T-1FBG484I device, preserve the prescribed power and ground planes, and verify high-speed differential routing against the relevant transceiver constraints before fabrication. This product record combines the exact device identity, package information, and order-code distinctions with application-oriented implementation guidance. It also identifies speed-grade and temperature-grade alternatives that retain the 484-ball package, helping engineers evaluate a common-footprint migration without overlooking configuration, qualification, or timing differences.

RFQ צור קשר
XC7K160T-1FBG676C - Kintex-7 162K FPGA | AMD Xilinx
XC7K160T-1FBG676C

XC7K160T-1FBG676C - Kintex-7 162K FPGA | AMD Xilinx

AMD Xilinx XC7K160T-1FBG676C is a Kintex-7 field-programmable gate array with 162,240 logic cells, a -1 speed grade, and a 676-ball FCBGA package. The device operates from a 1 V core supply and is associated with an extended commercial temperature grade up to 85 °C. Its programmable logic resources support demanding control, signal-processing, networking, industrial, communications, and test-equipment designs. A Kintex-7 FPGA belongs to the FPGA and CPLD category of programmable semiconductor devices. Unlike a fixed-function processor or application-specific integrated circuit, an FPGA combines configurable logic blocks, programmable interconnect, block RAM, DSP resources, and programmable input/output blocks. This hierarchy places the Kintex-7 device above individual logic cells and below larger system-level designs, allowing engineers to implement parallel datapaths, protocol interfaces, control logic, and signal-processing functions in one device. The XC7K160T family provides 162,240 logic cells and is manufactured on a 28 nm CMOS process. The -1 suffix identifies the device performance grade, while the FBG676 designation identifies the 676-ball package and associated commercial ordering configuration. The listed package dimensions and exact ball assignments remain controlled by the AMD Kintex-7 documentation. Compared with smaller 7 series devices, the 160T model provides substantially more logic and fixed resources for designs requiring multiple high-speed interfaces or parallel processing. The Kintex-7 architecture supports programmable I/O, embedded memory, digital signal processing, and dedicated clocking resources. These resources make the XC7K160T-1FBG676C suitable for video processing, industrial automation, communications infrastructure, instrumentation, and high-speed control systems. Compared with a discrete processor-and-ASIC implementation, an FPGA can consolidate parallel logic into a single programmable component and shorten the time required to modify protocols or algorithms after hardware fabrication. Typical deployments include industrial Ethernet and serial-interface bridges, high-speed data acquisition, radar and signal-processing front ends, test and measurement platforms, and embedded control systems. The device is particularly useful when several channels must be processed concurrently, latency must remain predictable, or field updates are required. Board-level implementation still depends on the selected I/O standards, memory interfaces, clocking topology, power budget, thermal conditions, and pin assignment. Design the PCB around the exact FBG676 land pattern and follow the AMD power, decoupling, clocking, configuration, and thermal guidance. Provide clean regulated supplies, place decoupling capacitors close to their associated power balls, maintain the required configuration interface, and route high-speed signals with controlled impedance. Because the package exposes hundreds of balls, assembly and inspection require adequate BGA assembly capability and a land pattern derived from the package documentation rather than inferred from a generic BGA library. This product page combines the verified XC7K160T-1FBG676C identity, package information, technology details, comparison references, sourcing context, and practical implementation guidance. It also distinguishes true drop-in FPGA options from changes that require new pin assignments, different power plans, different configuration behavior, or a different PCB footprint.

RFQ צור קשר
XC7K160T-1FBG676I - 162K-Logic Kintex-7 FPGA | AMD
XC7K160T-1FBG676I

XC7K160T-1FBG676I - 162K-Logic Kintex-7 FPGA | AMD

The AMD XC7K160T-1FBG676I is a Kintex-7 field-programmable gate array with 162,240 logic cells, 400 I/O, 28 nm fabrication technology, and a 676-ball FCBGA package. It belongs to the Kintex-7 FPGA family, a programmable-logic hierarchy that combines configurable logic blocks, block RAM, DSP resources, programmable I/O, clocking, and high-speed serial transceivers on one semiconductor device. A field-programmable gate array is a digital integrated circuit whose interconnections and processing functions are configured after manufacture. FPGA design tools translate RTL, constraints, and block-level descriptions into a configuration bitstream. Once loaded into the XC7K160T, this configurable logic can implement processors, control systems, protocol bridges, data-processing pipelines, and other digital functions without changing the physical circuit board. The Kintex-7 family provides more compute density than smaller FPGA families and is positioned for high-performance signal processing, networking, communications, and industrial systems. The XC7K160T-1FBG676I provides 162,240 logic elements and 400 user I/O. Listings identify 25,350 ALM and 11.43 Mbit of embedded memory, while the device also includes dedicated DSP resources and high-speed transceivers. Its -1 speed grade targets performance below the -2 and -3 grades, while the industrial suffix supports an operating range of -40°C to +100°C. Core and I/O power rails cover approximately 0.97 V to 1.03 V for the core and 1.2 V to 3.3 V across the listed operating supply range. The architecture supports parallel programmable logic, distributed memory, dedicated block RAM, DSP arithmetic, clock-management resources, and serial transceivers. This combination allows a single Kintex-7 implementation to consolidate functions that might otherwise require an FPGA, a processor, and external interface devices. The -1 grade is appropriate when a design requires a large amount of parallel logic but does not require the timing margin of a faster speed grade. Bitstream configuration, clocking, power sequencing, and transceiver operation must follow the Kintex-7 design guidance in DS182. Typical uses include industrial Ethernet interfaces, 10-gigabit Ethernet signal processing, PCIe Gen3 endpoint or root-port designs, network packet processing, radar and test-equipment front ends, high-speed data acquisition, and embedded control systems with substantial parallel processing. The 400-I/O count also supports board-level integration of memories, transceivers, clocks, sensors, and high-speed board interfaces when the electrical and pin-count constraints of the FCBGA-676 package are satisfied. The 676-ball FCBGA package demands careful PCB design, including controlled impedance routing, dense via arrays, adequate power-plane connectivity, and thermal management beneath the device. Designers should use the complete pinout, recommended decoupling network, and package-specific land pattern from DS182 rather than relying on generic BGA guidance. Configuration, clock, serial-transceiver, and JTAG signals should be validated for signal integrity before a production layout is released. This product record combines the Kintex-7 architecture, FCBGA-676 package characteristics, temperature and speed-grade distinctions, package-compatible alternatives, and practical PCB guidance. It supports direct part selection when the design needs 162,240 logic cells, 400 I/O, and the -1 industrial-grade Kintex-7 configuration in one 676-ball package.

RFQ צור קשר
XC7K160T-1FF676C - 162240-Cell Kintex-7 FPGA | AMD
XC7K160T-1FF676C

XC7K160T-1FF676C - 162240-Cell Kintex-7 FPGA | AMD

The AMD/Xilinx XC7K160T-1FF676C is a Kintex-7 field-programmable gate array with 162,240 logic cells, 28 nm process technology, and a 676-ball FCBGA package. It is the -1 speed-grade, commercial-temperature member of the XC7K160T device family, combining programmable logic, fixed resources, memory, and high-speed I/O in one package. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic and interconnect can be configured after fabrication. FPGAs occupy the hierarchy between programmable logic devices and application-specific integrated circuits. Unlike a fixed-function ASIC, an FPGA permits design changes, hardware acceleration, and product differentiation without fabricating a new custom chip. The Kintex-7 family balances substantial logic capacity with high-speed serial, parallel, and memory interfaces. The XC7K160T configuration provides 162,240 logic cells and 12,675 configurable logic blocks according to the device listing and family comparison material. A 1.096 GHz-class maximum clock figure is associated with the -1FFG676I ordering information, while the target part uses the -1 speed grade. Its 676-ball FCBGA package supports dense board-level integration, and the listed 400-user I/O count supports parallel digital connectivity. Exact I/O standards and performance depend on the selected bank voltage and the FPGA configuration. The 28 nm Kintex-7 architecture is intended for designs requiring substantial parallel processing without the cost and schedule of a custom ASIC. Programmable logic can implement protocol handling, packet processing, data acquisition, control, or test logic, while dedicated hard resources support clocking, memory, and high-speed serial communication. Designers can evaluate different clock rates and pin assignments before committing a final bitstream, making the device suitable for both prototype development and production control systems. Typical uses include industrial machine vision, communications infrastructure, test and measurement, radar or signal processing, high-speed data acquisition, and embedded video processing. The large logic inventory is especially useful for parallel datapaths that would otherwise require several smaller programmable devices. System partitioning should account for clocking, memory bandwidth, serial transceiver requirements, power budget, and PCB-routing constraints. A critical design consideration is that FCBGA assembly requires a dense, multilayer PCB with short, impedance-controlled escape routes and carefully planned power and ground planes. Decoupling, simultaneous-switching-noise control, thermal management, and BGA assembly capability can determine whether the FPGA achieves its intended performance. The -1 speed grade should be matched to timing constraints without assuming that a higher-grade alternative is necessary. This page combines the exact XC7K160T-1FF676C package identity with practical ordering guidance, same-package Kintex-7 alternatives, parameter comparisons, and design-focused selection criteria. It also distinguishes genuine drop-in options from device names that use a different package or ball map and therefore require PCB-level qualification.

RFQ צור קשר
XC7K160T-1FF676I - 162,240-Cell Kintex-7 FPGA | AMD
XC7K160T-1FF676I

XC7K160T-1FF676I - 162,240-Cell Kintex-7 FPGA | AMD

The AMD XC7K160T-1FF676I is a Kintex-7 field-programmable gate array with 162,240 logic cells, 250 user I/Os and a 676-ball flip-chip BGA package, built on a 28 nm CMOS process. The device uses the -1 speed grade and an industrial-temperature designation, making it suitable for high-throughput signal processing, programmable logic, connectivity and embedded control systems. A Kintex-7 FPGA is a reprogrammable semiconductor containing configurable logic blocks, programmable I/O, block RAM, DSP slices, clock-management resources and high-speed transceivers. Within the FPGA hierarchy, the XC7K160T occupies the middle of AMD's Kintex-7 range: it provides substantially more parallel processing capacity than entry-level Artix-7 devices while supporting high-speed serial connectivity and clocking functions. Key characteristics include 162,240 logic cells, approximately 250 user I/Os and 1,2675 CLBs as identified in the device listings. The -1 performance grade targets cost-sensitive applications that do not require the highest -2 or -3 speed grades. The -2 and -3 grades offer additional timing margin, while the -1 grade is appropriate when system timing closes with moderate design margins. The device combines programmable digital logic with DSP48 resources and dedicated memory blocks for filtering, modulation, waveform generation, packet processing and accelerator functions. AMD documentation identifies the Kintex-7 family as optimized for price-performance, with the 676-ball package supporting dense board-level integration where high pin count and robust interconnect access are important. Typical uses include telecommunications line cards, industrial networking, radar and signal-processing subsystems, high-speed data acquisition, video infrastructure, test equipment and aerospace-grade embedded processing. Industrial temperature screening makes the -1FF676I option relevant to equipment expected to operate in extended commercial environments. For a new PCB, use the manufacturer's package pinout, escape-routing guidance and power-supply recommendations rather than inferring connections from board-to-board-migration examples. The 676-ball package requires careful ball-grid-array escape routing, and the device's numerous high-speed I/Os make return paths, reference planes and via transitions important to signal integrity. This page consolidates the verified device identity, package and resource data, drop-in-compatible Kintex-7 options, engineering selection criteria and practical design notes into a single engineering reference. It also distinguishes exact package and speed-grade substitutions from parts that require a different PCB land pattern.

RFQ צור קשר
XC7K160T-1FFG676I - 162K Kintex-7 FPGA | AMD Xilinx
XC7K160T-1FFG676I

XC7K160T-1FFG676I - 162K Kintex-7 FPGA | AMD Xilinx

The AMD Xilinx XC7K160T-1FFG676I is a Kintex-7 field-programmable gate array with 162,240 logic cells, 400 user I/Os, and 11,980,800 block RAM bits in a 676-pin FCBGA package. It is manufactured on 28 nm CMOS technology, uses the -1 speed grade, and supports an industrial junction-temperature range from -40 °C to 100 °C. The FFG676 package measures approximately 27 × 27 mm and is intended for dense programmable-logic, signal-processing, networking, and high-speed interface systems. A Kintex-7 FPGA is a semiconductor device whose programmable logic fabric, block RAM, DSP resources, programmable I/O, and dedicated configuration pins can be configured after manufacture. Within the FPGA hierarchy, Kintex-7 devices sit between lower-cost Artix-7 devices and higher-density UltraScale devices, combining substantial logic, memory, DSP, and high-speed I/O resources for communications, industrial control, instrumentation, and embedded processing. The device provides 12,675 configurable logic blocks, 11,700 Kb of block RAM, and 600 DSP slices. Its -1 speed grade identifies the performance class, while the FFG676 suffix identifies the 676-ball package configuration. The industrial I suffix supports operation across the stated -40 °C to 100 °C junction-temperature range. A nominal 1 V core-related supply figure is associated with this device family, although complete power planning must follow the AMD/Xilinx power, configuration, and package guidance. The Kintex-7 architecture combines hard DSP slices, dual-port block RAM, high-speed serial transceivers, dedicated clock-management resources, and selectable I/O standards. These resources allow parallel logic, filtering, waveform generation, packet handling, and interface bridging to be consolidated in one device. The 400 user I/Os support substantial board-level connectivity, while the programmable fabric can implement application-specific control, datapaths, and protocol engines. Typical uses include industrial automation, test and measurement, high-speed data acquisition, communications infrastructure, embedded signal processing, video processing, and secure control systems. The 27 nm Kintex-7 architecture is particularly useful where designers need more logic, RAM, and DSP capacity than a smaller FPGA while retaining a large BGA package with ample I/O. PCB implementation requires a multilayer board with carefully controlled power distribution, ground-plane continuity, ball-escape routing, and high-speed design rules. Decoupling, configuration-bank handling, clocking, and JTAG access should be planned from the outset. Because the FFG676 land pattern is dense and device-specific, use the AMD/Xilinx pinout and PCB design guidance when assigning power, ground, configuration, and high-speed differential pairs. This page combines the key device identity, package characteristics, resource counts, drop-in speed-grade options, application guidance, and PCB considerations needed to evaluate the XC7K160T-1FFG676I for a new Kintex-7 design.

RFQ צור קשר
XC7K160T-2FB484I - Kintex-7 FPGA, 162240 Logic Cells, 484-FCBGA | AMD
XC7K160T-2FB484I

XC7K160T-2FB484I - Kintex-7 FPGA, 162240 Logic Cells, 484-FCBGA | AMD

The AMD Xilinx XC7K160T-2FB484I is a Kintex-7 field programmable gate array (FPGA) built on a 28 nm process, providing 162240 programmable logic cells, 285 I/O, and 11980800 bits of block RAM in a 484-ball FCBGA (FB484) surface-mount package. The -2 speed grade and industrial temperature qualification make it the mid-density option in the Kintex-7 family for signal processing, high-speed serial links, and general-purpose logic acceleration. A field programmable gate array is a reconfigurable digital integrated circuit whose interconnect and logic blocks are defined by a bitstream loaded at configuration time. Within the semiconductor hierarchy, an FPGA sits above programmable logic devices and below application-specific ICs, offering a middle ground between fixed-function ASICs and low-density CPLDs: the flexibility of software-programmable hardware with the density, clocking, and I/O bandwidth of a full SoC-class device. Key features of this device include the 28 nm 7-series fabric, 162240 logic cells, and a 484-FCBGA package with a 1 V nominal core supply. The -2 speed grade is the balanced performance grade in the Kintex-7 lineup, positioned between the entry -3 and -1 grades and the highest-performance -1L and -2L grades, which are screened for lower static power. Kintex-7 devices support high-speed serial transceivers, clock management, block RAM, and DSP slices for filtering and fixed-point arithmetic. Because the FB484 package is a dense flip-chip BGA on a 1.0 mm ball pitch, this device is intended for multilayer PCB designs with careful via-in-pad and power-plane planning. Decoupling must scale with the number of simultaneously switching I/O, and dedicated configuration, VCCINT, VCCAUX, and VCCBRAM rails each need their own filtering network. Typical applications include radar and sonar signal processing, high-speed data acquisition, industrial vision, test and measurement instrumentation, network interface equipment, and digital broadcast infrastructure. Kintex-7 devices are also common in aerospace, defence, and communications payloads where the industrial-grade screening and deep toolchain support matter. When planning a design, confirm the pinout and package ball assignment in the manufacturer package files, keep the VCCO supply within the I/O standard voltage range of each bank, and reserve a dedicated configuration memory interface for parallel or serial bitstream loading. This page consolidates distributor availability, package details, and drop-in alternatives together with practical design guidance that is not collected in a single datasheet. Key engineering decisions on this device center on density, package choice, and lifecycle. The 484-FCBGA footprint offers more I/O and routing headroom than smaller packages in the family but demands a laminate design with strict impedance control and a large ball escape array. Designers moving between Kintex-7 devices should confirm ball map compatibility before committing a layout, since the Xilinx package files are the authoritative source for pin assignment. The XC7K160T-2FB484I is listed as an active part, and its -2 grade and industrial rating make it the default selection for mid-density Kintex-7 designs that need more than a CPLD but do not require an UltraScale device.

RFQ צור קשר
XC7K160T-2FB676I - 162240-Cell -2 Kintex-7 FPGA | AMD
XC7K160T-2FB676I

XC7K160T-2FB676I - 162240-Cell -2 Kintex-7 FPGA | AMD

The AMD XC7K160T-2FB676I is a Kintex-7 field-programmable gate array with 162240 programmable logic cells, 400 I/O, and a 676-pin FCBGA package. It is built on 28 nm FPGA technology, operates from a 1 V core supply, and carries the -2 performance speed grade for demanding programmable-logic, communications, signal-processing, and embedded-systems designs. A field-programmable gate array is a reconfigurable digital semiconductor that combines programmable logic blocks, block RAM, programmable input/output resources, dedicated processing resources, and programmable interconnect. Within the semiconductor hierarchy, an FPGA sits above fixed-function logic and provides hardware customization through configuration bitstreams. This makes an FPGA useful when a design needs parallel processing, high I/O density, deterministic digital interfaces, or field-updatable behavior. The XC7K160T belongs to the Kintex-7 family and is identified by the -2 speed grade. Its 162240-cell architecture provides substantial logic capacity, while 400 I/O support interfaces to external memory, transceivers, converters, network controllers, and test equipment. The 1 V core supply and 28 nm process generation place the device between general-purpose programmable logic and larger, higher-cost Kintex designs that require more resources or greater I/O bandwidth. The 676-pin FCBGA package supports dense board layouts and high pin availability, but it also demands careful ball assignment, multilayer PCB construction, and controlled power delivery. Unlike a small serial FPGA, this device supports a broad mix of parallel and serial connectivity. Its industrial-temperature suffix identifies it for applications requiring operation across an extended environmental range, while the -2 grade provides a defined performance class within the Kintex-7 portfolio. Typical uses include industrial control systems, high-speed data acquisition, video and image processing, communications infrastructure, test and measurement equipment, and embedded signal-processing platforms. A video-processing design can use parallel logic for pixel pipelines and block RAM for line buffering. A communications design can partition serial transceivers, clocks, protocol logic, and supervisory functions across the programmable fabric while retaining the flexibility to update the bitstream during product maintenance. PCB design should begin with the manufacturer’s package pinout and power requirements rather than treating all 676 balls as interchangeable. Separate clean and noisy supplies, place decoupling capacitors close to their associated supply balls, provide adequate via arrays beneath the BGA, and preserve high-speed return paths. Configuration storage, programming access, and a recovery strategy must also be planned because an FPGA depends on a valid bitstream before its configured logic becomes operational. This product page combines the Kintex-7 device identity, package information, parameter-level comparisons, replacement guidance, and engineering design notes. It helps engineers distinguish speed-grade and package-suffix changes before committing to a 676-ball board design, while directing procurement requests through the Request a Quote form on this page.

RFQ צור קשר
XC7K160T-2FBG484C - 162K-Cell Kintex-7 FPGA | AMD Xilinx
XC7K160T-2FBG484C

XC7K160T-2FBG484C - 162K-Cell Kintex-7 FPGA | AMD Xilinx

AMD Xilinx XC7K160T-2FBG484C is a Kintex-7 field-programmable gate array with 162,240 programmable logic cells, a 1 V core supply, and 185 I/O sites in a 484-ball lidless FCBGA package. Built on 28 nm FPGA technology, the device combines programmable logic, block RAM, DSP resources, high-speed serial transceivers, and clock-management resources on one monolithic device. The -2 speed grade is intended for designs requiring a balance of performance and power efficiency. A field-programmable gate array, or FPGA, is a digital semiconductor whose interconnect and logic configuration are defined after manufacture. FPGA device families form part of the broader programmable-logic hierarchy alongside complex programmable logic devices. By integrating configurable parallel and serial processing resources into one package, an FPGA can accelerate parallel algorithms, implement communication protocols, perform signal processing, consolidate multiple discrete functions, and support field upgrades without changing the printed circuit board. The XC7K160T-2FBG484C provides 162,240 logic cells and 185 I/O in a 484-BBGA FCBGA package. Its 28 nm process supports substantially higher logic density than older FPGA technologies while retaining programmable serial connectivity and dedicated hardware for clock generation and DSP operations. The exact number of transceivers, block RAM blocks, DSP slices, programmable I/O standards, and operating-temperature limits should be selected from the manufacturer ordering guide and Kintex-7 data sheet for the selected configuration. The -2 suffix identifies the device speed grade. A lower-numbered speed grade generally trades maximum timing performance for potentially lower power characteristics, while a higher-numbered grade offers additional timing margin. Because FPGA timing depends on the implemented logic path, clock architecture, I/O standard, speed grade, and operating conditions, a replacement must preserve the device identity, package ball map, power architecture, configuration compatibility, and required performance grade. Typical applications for this Kintex-7 device include industrial control and automation, high-throughput data acquisition, network interface equipment, communications infrastructure, video and image processing, and embedded signal-processing systems. The 185 available I/O sites allow the design to connect external memory, transceivers, clocks, sensors, and data-conversion components, while its programmable logic resources support parallel pipelines that would otherwise require multiple complex devices. PCB design should preserve the 484-ball FCBGA escape routing, power distribution, decoupling, and thermal-management requirements of the Kintex-7 package. Confirm ball assignments against the manufacturer package files before assigning pins, and validate high-speed interfaces with the appropriate board-level constraints. Because the package contains many power and ground balls, uninterrupted ground-plane continuity and uniform thermal spreading are central to reliable operation. This product page consolidates the exact device identity, package information, source-backed operating attributes, pin-compatible alternatives, comparison parameters, and practical design considerations into one engineering reference. It also distinguishes true same-ball-map replacements from related Kintex-7 devices that require a different package or may not preserve configuration, timing, temperature, or qualification requirements.

RFQ צור קשר
XC7K160T-2FBG484I - 162K-Cell Kintex-7 FPGA | AMD
XC7K160T-2FBG484I

XC7K160T-2FBG484I - 162K-Cell Kintex-7 FPGA | AMD

The AMD XC7K160T-2FBG484I is a Kintex-7 field-programmable gate array built on 28 nm technology, with 162,240 logic cells, 285 I/O, and a 484-ball FCBGA package. The device uses a 1 V core supply and the -2 speed grade is intended for high-performance designs requiring substantial parallel logic, DSP, and memory resources in a single package. A field-programmable gate array is a programmable semiconductor containing configurable logic blocks, programmable interconnect, block RAM, and dedicated digital signal processing resources. Within the FPGA hierarchy, the Kintex-7 family occupies the performance range between lower-cost Virtex-7 devices and ultra-high-end Virtex-7 devices, making the XC7K160T suitable for demanding communications, industrial control, instrumentation, and signal-processing systems. Principal device attributes include 162,240 logic cells, a 28 nm process node, 285 I/O, and 484-ball lead-free FCBGA packaging. The -2 suffix identifies the performance grade, while the I suffix identifies the industrial temperature grade. The FCBGA construction provides dense interconnect access for high-pin-count designs, although it requires careful via-in-pad and thermal-via layout to achieve reliable electrical and thermal performance. The Kintex-7 architecture combines programmable logic with DSP slices, block RAM, and high-speed transceiver resources on devices that include them. This balance allows designers to consolidate control logic, parallel data paths, packet-processing functions, and digital filtering into one programmable device instead of combining an FPGA with several discrete companion ICs. The 484-ball package also requires an assembly process capable of handling fine-pitch, large-area BGA interconnects. Typical uses include industrial automation and motion control, high-speed data acquisition, telecommunications line-card processing, radar and test instrumentation, image-processing pipelines, and low-latency protocol bridging. The 162,240-cell device provides more logic capacity than many smaller Kintex-7 members, making it appropriate for multi-channel architectures that must be reconfigured for different operating modes without redesigning the printed circuit board. A critical design consideration is the power and thermal budget. Although the nominal core voltage is 1 V, utilization-dependent dynamic power, adjacent I/O activity, and the dense BGA solder mask design all influence board temperature. Use the AMD power estimator and the device data sheet for resource-specific figures, provide multiple decoupling positions, and validate the assembled board across temperature and I/O activity conditions. This page adds application-specific engineering context, a parameter comparison among same-footprint Kintex-7 options, and practical layout guidance that is not consolidated in a single manufacturer datasheet table.

RFQ צור קשר
XC7K160T-2FBG676C - 162,240-Cell Kintex-7 FPGA | AMD
XC7K160T-2FBG676C

XC7K160T-2FBG676C - 162,240-Cell Kintex-7 FPGA | AMD

The AMD XC7K160T-2FBG676C is a Kintex-7 field-programmable gate array with 162,240 logic cells, 400 user I/O, and 11,700 Kb of block RAM in a 676-BBGA FCBGA package. The -2 speed grade provides a performance tier between the -3 and -1 devices, while the FBG676 package supports high-density, high-speed board designs requiring extensive parallel connectivity. A Kintex-7 FPGA is a programmable digital logic device in the FPGA and CPLD hierarchy. Unlike a fixed-function application-specific integrated circuit, an FPGA combines configurable logic, block RAM, programmable input/output, clocking, and signal-processing resources on one semiconductor. The XC7K160T belongs to the Kintex-7 family, which combines substantial general-purpose logic with high-speed serial connectivity and digital signal-processing capability for demanding embedded systems. Principal device attributes include 162,240 logic cells, 400 user I/O, and 11,700 Kb of block RAM. The package is identified as FBG676, a 676-ball FCBGA, and the -2 designation identifies the device speed grade. The available product documentation also identifies MMCM and PLL resources, supporting clock generation, phase shifting, jitter management, and multiple clock domains in designs that require deterministic clock distribution. The device's 400 I/O resources make it suitable for parallel interfaces, high-speed memory interfaces, data acquisition, control systems, and external network connectivity. Its block RAM supports buffering, packet storage, lookup tables, and firmware or parameter retention. Logic resources can implement processors, protocol controllers, arithmetic pipelines, and custom accelerators, while dedicated clocking resources help maintain timing margin across multiple clock domains. Typical applications include industrial automation, test and measurement, high-speed data acquisition, video and image processing, communications infrastructure, and embedded signal-processing systems. Kintex-7 FPGAs are especially appropriate where design flexibility, parallel I/O density, and deterministic programmable logic are more important than minimizing a fixed device's power or cost. Board design requires careful BGA fanout, layer transitions, controlled-impedance routing, power-plane distribution, and decoupling across the many supply rails. Because a 676-ball FCBGA presents demanding routing and assembly constraints, validate escape routing, thermal performance, and high-speed channel design before releasing the PCB layout to fabrication.

RFQ צור קשר
XC7K160T-2FF676C - 162K Kintex-7 FPGA | AMD/Xilinx
XC7K160T-2FF676C

XC7K160T-2FF676C - 162K Kintex-7 FPGA | AMD/Xilinx

The AMD/Xilinx XC7K160T-2FF676C is a Kintex-7 field-programmable gate array built on 28 nm FPGA technology, with 162,240 logic cells, 400 user inputs/outputs, a 1 V operating core voltage, and a 676-pin FCBGA package. It combines programmable logic, configurable I/O, embedded memory, DSP processing resources, dedicated clocking, and high-speed serial transceivers in one device. An FPGA is a semiconductor whose digital circuit is defined after manufacture by loading a configuration bitstream. Within the broader semiconductor hierarchy, an FPGA is a programmable-logic IC and a field-programmable gate array. Unlike a fixed-function application-specific integrated circuit, an FPGA can be reprogrammed for protocol bridging, parallel processing, signal acquisition, control logic, or other system functions, while its 676-ball package provides a high-density connection interface to external memory, converters, transceivers, and clock sources. The Kintex-7 family combines programmable logic with dedicated hardware for DSP and serial connectivity. The XC7K160T-2FF676C provides 162,240 logic cells and 400 user I/O in an FCBGA-676 package. Its 28 nm process technology supports a 1 V core operating voltage, while the 676-contact package supports dense board-level interconnect. The device is identified by the XC7K160T family, -2 performance suffix, and the FF676C package and commercial-grade ordering suffix. Because this is an FPGA rather than a fixed-function converter or processor, its implemented performance depends on the configuration, logic mapping, memory organization, clocking scheme, and external circuitry. The -2 ordering code denotes a specific performance grade within the Kintex-7 ordering system. Designers should use the device documentation and the pinout associated with the exact order code when assigning power rails, clock inputs, configuration pins, high-speed transceiver pins, and general-purpose I/O. Typical applications include high-speed interface aggregation, network equipment, industrial control and test systems, signal-processing platforms, embedded vision, communications infrastructure, and FPGA-based accelerators. The large logic capacity is useful when a design combines parallel datapaths with serial links, while the 400 user I/O allows external memory and multiple peripheral interfaces to be connected without a separate programmable-logic device. PCB design requires close attention to the FCBGA ball map, multilayer escape routing, power-plane integrity, decoupling, thermal management, and high-speed clock and transceiver layout. The 676-pin package does not match the available package-diagram library, so use the official package drawing and pin table for land-pattern and routing work. Confirm the exact suffix interpretation and temperature grade against the manufacturer ordering guide before release. This product record combines device specifications, package details, practical design guidance, and same-family replacement comparisons. It also distinguishes directly relevant package and speed-grade options from alternatives that require a different footprint, helping engineers narrow a replacement search without assuming that every Kintex-7 ordering code is interchangeable.

RFQ צור קשר
XC7K160T-2FF676I - 162K Kintex-7 FPGA | AMD Xilinx
XC7K160T-2FF676I

XC7K160T-2FF676I - 162K Kintex-7 FPGA | AMD Xilinx

AMD Xilinx XC7K160T-2FF676I is a Kintex-7 field-programmable gate array with 162,240 logic cells, 250 user I/Os, a maximum clock frequency of 710 MHz, and a 676-ball FCBGA package. The -2 speed grade targets designs requiring a balance of performance, power consumption, and design flexibility across industrial, communications, instrumentation, and embedded processing systems. A field-programmable gate array is a semiconductor whose digital logic can be configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, combining configurable logic blocks, programmable I/O, block RAM, DSP arithmetic resources, clock-management circuits, and high-speed serial transceivers. This architecture allows parallel processing, hardware acceleration, protocol bridging, and deterministic control functions to be consolidated into one device rather than implemented across multiple fixed-function chips. The XC7K160T belongs to the Kintex-7 family and provides 162,240 logic cells with a stated maximum operating frequency of 710 MHz. Its 250 I/Os support connection to external memory, high-speed interfaces, control signals, clocks, and data converters. The 676-ball FCBGA package also exposes the device's high-speed I/O and configuration resources, while its fine-pitch ball pitch makes careful PCB layout, thermal management, and assembly process control essential. The -2 suffix identifies the device speed grade. Compared with a -1 part, the -2 grade provides a higher performance level; a -3 grade is faster still. Core-voltage information associated with this device lists an operating range of 970 mV to 1.03 V. Because Kintex-7 devices contain configurable power-management features, actual rail requirements and current depend on the selected logic, memory interfaces, transceivers, I/O standards, clocking, and utilization reported by the implementation tools. Typical uses include industrial control, communications infrastructure, test and measurement, high-speed data acquisition, signal processing, network equipment, and embedded systems that benefit from parallel programmable logic. The large logic capacity supports parallel datapaths, protocol state machines, packet processing, and custom accelerator pipelines. Integrated block RAM and DSP resources can reduce reliance on external components when the design maps efficiently onto the FPGA architecture. When laying out a board around this FCBGA device, follow the manufacturer pinout, power-plane, decoupling, and high-speed-interface guidance exactly. Provide continuous supply planes, place bypass capacitors at the relevant power balls, route clock and differential pairs with controlled impedance, and confirm the assembly process supports the package geometry. Check worst-case junction temperature, configured transceivers, I/O standards, and core utilization before approving the power budget. This product record combines the exact manufacturer-family parameters, package information, speed-grade references, drop-in candidates, and engineering guidance needed to evaluate a board-level migration. It emphasizes where an alternate speed grade changes performance, where package suffixes require procurement review, and which design constraints remain unchanged when the FPGA itself is replaced.

RFQ צור קשר
XC7K160T-2FFG676C 400-I/O Kintex-7 FPGA | AMD
XC7K160T-2FFG676C

XC7K160T-2FFG676C 400-I/O Kintex-7 FPGA | AMD

The AMD XC7K160T-2FFG676C is a Kintex-7 field-programmable gate array built on a 28 nm process, with 162,240 logic cells, 400 user I/Os and a maximum operating frequency of 470.37 MHz. The device is offered in a 676-ball FCBGA package and targets designs requiring a strong balance of programmable logic, DSP capacity, memory interfaces and high-speed connectivity. A field-programmable gate array is a semiconductor whose digital logic, signal processing and interconnect resources are configured after manufacture. In the product hierarchy, an FPGA is a programmable-logic device and a semiconductor. The Kintex-7 family occupies the middle of AMD's 7-series portfolio, combining higher logic density than smaller devices with less implementation cost than the largest FPGAs. This makes the XC7K160T useful for control, acquisition, signal-processing and communications systems that exceed the capacity of small programmable devices. The XC7K160T provides 400 user I/Os and 162,240 logic cells in the FFG676 package. Its stated core voltage range is 970 mV to 1.03 V, while the -2 designation identifies the device speed grade. The Kintex-7 architecture also includes DSP resources and clock-management capabilities such as MMCM and PLL blocks. These resources support parallel data processing, clock-domain management and high-throughput interfaces in systems that must implement substantial digital logic on one device. AMD describes the Kintex-7 family as optimized for price-performance and implemented using 28 nm technology. The family supports mainstream connectivity requirements such as PCIe Gen3 and 10 Gigabit Ethernet. High-speed transceivers, memory controllers and programmable logic can therefore share one package, reducing board count and simplifying synchronization compared with a design assembled from separate processors, FPGAs and interface devices. Typical applications include wireless baseband equipment, industrial video processing, high-speed data acquisition, network interface equipment and test systems. In a communications design, the FPGA can implement packet processing, filtering, protocol conversion and clock recovery. In an acquisition system, it can combine parallel ADC capture, digital filtering, buffering and a high-speed host interface within one programmable fabric. The FFG676 package requires a dense, multilayer PCB layout with many power and ground balls, short high-speed escape routes and carefully controlled impedance. Power sequencing, decoupling and thermal management should follow AMD's Kintex-7 design guidance. Configuration storage, clocking, transceiver reference circuitry and auxiliary supply requirements must also be planned before schematic capture. This product page combines package and resource details with drop-in alternatives, parameter comparisons, sourcing guidance and practical PCB-design considerations. It is intended to help engineers confirm footprint compatibility, evaluate speed-grade or temperature-grade alternatives and plan a robust Kintex-7 implementation.

RFQ צור קשר
XC7K160T-2FFG676I - Kintex-7 FPGA 162K Logic Cells | AMD
XC7K160T-2FFG676I

XC7K160T-2FFG676I - Kintex-7 FPGA 162K Logic Cells | AMD

The AMD XC7K160T-2FFG676I is a Kintex-7 family Field Programmable Gate Array (FPGA) delivering 162,240 logic cells, 400 user I/Os, and 11,980,800 bits of block RAM in a 676-ball FCBGA package. It operates over the industrial temperature range of -40°C to +100°C and is lead-free / RoHS compliant. A Field Programmable Gate Array (FPGA) is an integrated circuit that can be configured by the designer after manufacturing, enabling custom digital logic implementations without the cost and lead time of ASIC development. FPGAs sit within the broader hierarchy of programmable logic devices (PLDs), which range from simple CPLDs to high-capacity FPGAs, and are essential in applications requiring parallel processing, rapid prototyping, and field-updatable hardware. Key features of the XC7K160T-2FFG676I include the -2 speed grade, which balances performance and power consumption, and the FFG676 package that supports easy migration between Kintex-7 family members. The device provides 400 user I/Os, 10 clock management tiles (CMTs) with MMCM and PLL, and 600 DSP slices for high-throughput signal processing. Its 36 Kb block RAM blocks total 11,980,800 bits, enabling substantial on-chip data storage. Architecturally, the Kintex-7 series is built on a 28 nm high-k metal gate (HKMG) process, offering a strong balance of performance, power, and cost. The -2 speed grade provides a middle ground between the higher-performance -3 and the lower-power -1L/-2L variants. The device supports a wide range of I/O standards, including LVCMOS, LVDS, and HSTL, and includes integrated PCIe, Gigabit transceivers, and DDR3/DDR4 memory interfaces. Typical applications include high-performance signal processing, software-defined radio, medical imaging, aerospace and defense systems, and wired communications. The 400 I/Os and 162K logic cells make it suitable for complex digital designs requiring substantial parallel processing and connectivity. When designing with this FPGA, careful attention must be paid to power supply decoupling and thermal management. The FCBGA package requires a well-designed PCB with adequate thermal vias and a solid ground plane to ensure reliable operation at industrial temperatures.

RFQ צור קשר
XC7K160T-3FBG484E - 162K Logic Cell Kintex-7 FPGA | AMD
XC7K160T-3FBG484E

XC7K160T-3FBG484E - 162K Logic Cell Kintex-7 FPGA | AMD

The AMD XC7K160T-3FBG484E is a Kintex-7 field-programmable gate array with 162,240 logic cells, 11,700 Kb of block RAM, 600 DSP slices, and 285 I/O sites, supplied in a 484-ball FCBGA package. It is manufactured on a 28 nm process and targets the -3 performance grade with an extended commercial temperature range rated from 0 °C to 100 °C at the junction. The 23 mm × 23 mm package supports high-speed parallel processing, DSP acceleration, memory-intensive logic, and programmable I/O in a single device. A Kintex-7 FPGA belongs to the 7 Series FPGA hierarchy and combines configurable logic blocks, programmable input/output blocks, block RAM, digital signal processing slices, high-speed transceivers, clock-management resources, and dedicated configuration memory. Unlike a fixed-function processor or application-specific controller, the Kintex-7 allows parallel datapaths, custom interfaces, and hardware acceleration to be implemented through programmable logic, while the integrated MMCM and PLL resources support clock generation and jitter control. Key resources for the XC7K160T-3FBG484E include 162,240 logic cells, 11,700 Kb of block RAM, 600 DSP slices, and 285 I/O. The -3 speed grade provides the highest Kintex-7 performance class identified in the family documentation, making it appropriate for timing-critical datapaths. Its extended temperature designation covers industrial-temperature applications where the junction can reach 100 °C, subject to the device's power and thermal limits. The 484-FCBGA package provides a high-density interconnect for high-performance designs requiring many external connections. Because the device uses a large, fine-pitch BGA, PCB construction demands careful via-in-pad or via-under-bump geometry, controlled solder-paste deposition, X-ray inspection, and adequate thermal relief around the package. The AMD Kintex-7 data sheet and package documentation should be used directly for the land pattern, pin states, configuration requirements, and power-decoupling arrangement. Typical applications include high-throughput signal processing, digital communications, industrial control, high-speed data acquisition, network infrastructure, video and image processing, and prototyping systems that benefit from parallel programmable logic. The 600 DSP slices allow multiply-accumulate-heavy filters and transforms to execute in parallel, while 11,700 Kb of block RAM supports buffering, packet storage, lookup functions, and wide data paths. When planning the PCB, place decoupling capacitors close to the supply pins, preserve the manufacturer's high-speed routing guidance, and treat thermal management as part of the layout rather than an afterthought. Configuration pins, clock inputs, and high-speed transceiver or I/O interfaces each have dedicated constraints that must be checked against the selected design tools and board stack-up. This page consolidates device resource counts, package details, temperature information, drop-in device variants, and engineering design guidance into a single purchasing and evaluation reference. Use the AMD Kintex-7 data sheet for complete electrical tables, pin definitions, configuration memory requirements, and design-tool-specific implementation details.

RFQ צור קשר
XC7K160T-3FBG676E - 162K-Cell Kintex-7 FPGA | AMD
XC7K160T-3FBG676E

XC7K160T-3FBG676E - 162K-Cell Kintex-7 FPGA | AMD

The AMD XC7K160T-3FBG676E is a Kintex-7 field-programmable gate array with 162,240 logic cells, 400 I/O resources, and 11.98 Mb of block RAM, manufactured on 28 nm CMOS technology and packaged in a 676-pin FCBGA. It is designed for high-performance programmable logic, communications, signal processing, industrial control, and data-acquisition systems. The -3 designation identifies the highest-performance Kintex-7 speed grade, while the E suffix identifies the extended-temperature option. A Kintex-7 FPGA is a semiconductor device whose digital logic, memory blocks, programmable input/output resources, and signal-processing blocks are configured after manufacture. Within the FPGA hierarchy, it combines configurable logic, block RAM, DSP resources, high-speed serial transceivers, clock-management resources, and advanced input/output structures. This integration allows one package to implement parallel processing, control logic, data acquisition, interface bridging, and protocol handling without requiring numerous discrete programmable devices. The XC7K160T-3FBG676E provides 162,240 programmable logic cells distributed across 12,675 configurable logic blocks. Its 400 I/O resources support high pin counts for parallel buses, memory interfaces, control signals, and multi-gigabit I/O. Internal block RAM provides 11,980,800 bits of storage for packet buffering, data alignment, lookup tables, and temporary computation. The device also incorporates DSP resources for filtering, multiply-accumulate, and fixed-point signal-processing workloads. The -3 speed grade is specified for maximum performance within the Kintex-7 family, and the device operates with a 1.0 V core supply according to the product listing. AMD documents the Kintex-7 family in DS182, while the FBG676 package-specific details, pinout, power behavior, and decoupling requirements are defined by the package and device documentation. Configuration, clocking, and power sequencing must follow the applicable AMD configuration and design guidelines. Typical uses include industrial Ethernet and other high-speed communication equipment, radar and signal-processing front ends, test and measurement systems, high-resolution data converters, video infrastructure, and control platforms requiring deterministic parallel processing. The 400 I/O resources are particularly useful where wide data buses coexist with multiple high-speed links and substantial on-device buffering. PCB design requires careful treatment of the FCBGA escape routing, power planes, decoupling, clock integrity, and configuration pins. Use the AMD package pinout files and the manufacturer package-design guidance when assigning every ball, power rail, configuration signal, and reference voltage. Differential pairs should use the prescribed impedance and length-matching rules, while power delivery should minimize loop area between supply and ground structures. This page organizes the device’s principal specifications, sourcing information, family alternatives, application guidance, and design considerations into one engineering-focused reference. Use the official Kintex-7 data sheet and package pinout files as the controlling documents for final schematic, layout, timing, and thermal validation.

RFQ צור קשר
XC7K160T-3FFG676E - Kintex-7 FPGA 162K Cells | AMD
XC7K160T-3FFG676E

XC7K160T-3FFG676E - Kintex-7 FPGA 162K Cells | AMD

The AMD XC7K160T-3FFG676E is a high-performance Kintex®-7 Field Programmable Gate Array (FPGA) from the Kintex-7 family, fabricated on a 28nm process technology. It features 162,240 logic cells, 400 user I/O pins, and 11,980,800 bits of block RAM, all housed in a 676-ball FCBGA (27x27mm) package. This device is the -3 speed grade, the highest performance option in the Kintex-7 lineup, offering maximum clock frequencies and throughput for demanding applications. A Field Programmable Gate Array (FPGA) is an integrated circuit that can be configured by the customer after manufacturing to implement any digital logic function. Unlike fixed-function ASICs, FPGAs contain a fabric of programmable logic blocks, interconnects, and I/O elements that can be reprogrammed in the field, making them ideal for prototyping, high-performance computing, and applications requiring hardware flexibility. FPGAs sit within the broader hierarchy of programmable logic devices (PLDs), which also includes CPLDs, and are a key component in the semiconductor industry for accelerating workloads that benefit from parallel processing. Key features of the XC7K160T-3FFG676E include 400 user I/O pins supporting various I/O standards, 11,980,800 bits of block RAM for on-chip data storage, and 400 DSP slices for high-speed digital signal processing. The -3 speed grade provides the highest performance, with internal clock speeds exceeding 600 MHz. The device also supports PCIe® Gen2, Gigabit Ethernet, and other high-speed serial transceivers, making it suitable for a wide range of communication and processing tasks. Technically, the Kintex-7 family is optimized for best price-performance, offering a 2X improvement over the previous generation. The 28nm high-k metal gate (HKMG) process technology enables low power consumption while maintaining high logic density. The device includes advanced clock management tiles (CMTs) with PLLs and MMCMs for precise clock generation, and supports partial reconfiguration for dynamic logic updates. Typical applications include software-defined radio (SDR), medical imaging, aerospace and defense systems, and high-performance computing. The XC7K160T-3FFG676E is particularly well-suited for applications requiring high-speed data processing, such as radar signal processing and video/image processing, where its combination of logic density, DSP capability, and high-speed transceivers provides a competitive advantage. When designing with this device, ensure proper power supply decoupling on VCCINT, VCCAUX, and VCCO rails, and follow AMD's recommended PCB layout guidelines for high-speed signals. The device requires a 1.0V core voltage (VCCINT) and supports various I/O bank voltages (VCCO) depending on the interface standard.

RFQ צור קשר
XC7K160T-L2FBG484E - Low-Power Kintex-7 FPGA | AMD
XC7K160T-L2FBG484E

XC7K160T-L2FBG484E - Low-Power Kintex-7 FPGA | AMD

The AMD XC7K160T-L2FBG484E is a Kintex-7 field-programmable gate array with 162,240 logic cells, 11,700 Kb of block RAM, and 285 I/O, supplied in a 484-pin FCBGA package measuring 23 mm by 23 mm. Its -2L speed grade targets lower maximum static power and can support lower core voltages than the standard -2 grade, while the -3 grade provides the highest Kintex-7 performance. The XC7K160T combines programmable logic, DSP, block RAM, high-speed serial transceivers, and general-purpose I/O in a single device for demanding embedded systems. A Kintex-7 FPGA belongs to the programmable-logic hierarchy, where an FPGA is a semiconductor containing configurable logic blocks, memory, and routing resources. These resources form parallel processing, interface, and signal-processing circuits after the device is programmed. Compared with application-specific standard logic, an FPGA supports field upgrades, hardware parallelism, and product differentiation without requiring a new ASIC fabrication run. Kintex-7 devices occupy the middle of the AMD Xilinx product range between lower-cost Artix-7 and higher-density Virtex-7 families. The principal device resources include 162,240 logic cells and 11,700 Kb of block RAM. The 285 available I/O support connections to memory, converters, network transceivers, clocks, and external control logic. The -2L operating designation identifies the lower-power family variant rather than the standard -2 device. This makes the part suitable for systems that require substantial parallel processing while balancing performance, thermal design, and power consumption across industrial, communications, instrumentation, and defense-oriented equipment. The FPGA architecture combines programmable logic with dedicated DSP and memory resources, enabling fixed- or floating-point pipelines, digital filtering, modulation, protocol handling, and high-throughput data movement. Its large 484-contact FCBGA package also creates a demanding PCB-layout environment: high-speed differential pairs, multiple supply rails, exposed thermal requirements, and numerous decoupling connections must be planned together. Designers should treat power distribution, via current capacity, return-path continuity, and thermal dissipation as part of the FPGA design rather than as after-the-fact PCB details. Typical uses include telecommunications line cards, industrial vision, radar and signal-processing front ends, high-speed test equipment, network-interface controllers, and embedded accelerator platforms. In each case, the 162,240 logic cells and 11,700 Kb of block RAM allow substantial parallel workloads to be consolidated into one programmable device. The 23 mm by 23 mm FCBGA-484 footprint supports dense, high-pin-count implementations but demands advanced board assembly capability and careful thermal validation. For a new board, verify the selected device speed grade, industrial temperature grade, and package variant against the required clocking, transceiver, and I/O standards. Because the -2L grade emphasizes reduced power characteristics, evaluate both static and dynamic power at the intended operating voltage and temperature. Use the AMD Kintex-7 datasheet and package pinout for power rails, configuration pins, package balls, and decoupling requirements before releasing the PCB. This product page consolidates the key device identity, resource, package, comparison, and sourcing information into an engineer-oriented reference. It also identifies same-footprint Kintex-7 alternatives and organizes replacement choices by speed grade, temperature grade, and application constraints rather than presenting every differently packaged FPGA as a drop-in equivalent.

RFQ צור קשר
XC7K160T-L2FBG484I - Low-Power Kintex-7 FPGA | AMD
XC7K160T-L2FBG484I

XC7K160T-L2FBG484I - Low-Power Kintex-7 FPGA | AMD

The AMD XC7K160T-L2FBG484I is a low-power Kintex-7 field-programmable gate array built on a 28 nm process and supplied in a 484-ball FCBGA package. The device provides 285 I/O, approximately 162,240 logic cells, and 11,808,000 flip-flops. Its -2L speed designation identifies a lower-power variant that can operate at lower core voltages than the standard -2 grade. The -2L family is screened for reduced maximum static power, making the XC7K160T-L2FBG484I suitable for systems that need substantial programmable logic without operating continuously at the power level of a standard -2 device. A Kintex-7 FPGA is a programmable semiconductor in the FPGA and CPLD hierarchy, combining configurable logic, block RAM, programmable input/output resources, digital signal processing resources, and high-speed serial transceivers. Within the broader semiconductor and programmable-logic categories, a Kintex-7 device bridges general-purpose FPGA implementation and higher-density signal-processing designs. Its architecture supports parallel logic, embedded memory, clock management, and serial connectivity within one configurable device. The principal benefit of the -2L grade is its lower static and dynamic power profile relative to the standard -2 speed grade. The industrial-temperature suffix I supports operation from -40°C to +100°C, while the 484-ball FCBGA provides 285 I/O and extensive interconnect resources. These characteristics support industrial control, communications infrastructure, test equipment, embedded signal processing, and high-speed data acquisition systems where logic density, I/O availability, and power behavior matter more than the maximum timing performance of the -3 grade. The Kintex-7 architecture is implemented on a 28 nm process and belongs to the Xilinx 7-series device family. The -2L grade is specifically screened for lower maximum static power and can use lower core voltage than -2 devices, reducing energy per processed bit in designs with substantial dynamic activity. Designers should still evaluate board-level power, configured resource utilization, I/O standards, clocking, and thermal rise during system implementation. Typical uses include industrial Ethernet and control systems, network interface equipment, high-speed serial processing, telemetry, radar signal paths, digital instrumentation, and embedded communications platforms. The 285 available I/O support parallel interfaces and multiple voltage domains, while programmable logic and block memory allow protocol handling, data buffering, filtering, and state-machine control to be consolidated into one FPGA. PCB implementation requires careful attention to the 484-ball land pattern, power decoupling, clock integrity, and high-speed routing. Follow the AMD package, schematic, and configuration guidance for ball assignments and supported I/O standards. Validate pin assignments, differential routing, supply sequencing, and thermal performance in the target enclosure before releasing production hardware. This page combines device-level electrical limits, package constraints, practical integration guidance, and same-footprint Kintex-7 alternatives. It also provides search-focused pinout, datasheet, replacement, and design-reference information for engineers evaluating the XC7K160T-L2FBG484I against other -1, -2, -2L, and -3 speed and temperature configurations.

RFQ צור קשר