XC7K160T-1FBG676I - 162K-Logic Kintex-7 FPGA | AMD
MPN: XC7K160T-1FBG676I ✓ פעילXC7K160T-1FBG676I סקירה
A field-programmable gate array is a digital integrated circuit whose interconnections and processing functions are configured after manufacture. FPGA design tools translate RTL, constraints, and block-level descriptions into a configuration bitstream. Once loaded into the XC7K160T, this configurable logic can implement processors, control systems, protocol bridges, data-processing pipelines, and other digital functions without changing the physical circuit board. The Kintex-7 family provides more compute density than smaller FPGA families and is positioned for high-performance signal processing, networking, communications, and industrial systems.
The XC7K160T-1FBG676I provides 162,240 logic elements and 400 user I/O. Listings identify 25,350 ALM and 11.43 Mbit of embedded memory, while the device also includes dedicated DSP resources and high-speed transceivers. Its -1 speed grade targets performance below the -2 and -3 grades, while the industrial suffix supports an operating range of -40°C to +100°C. Core and I/O power rails cover approximately 0.97 V to 1.03 V for the core and 1.2 V to 3.3 V across the listed operating supply range.
The architecture supports parallel programmable logic, distributed memory, dedicated block RAM, DSP arithmetic, clock-management resources, and serial transceivers. This combination allows a single Kintex-7 implementation to consolidate functions that might otherwise require an FPGA, a processor, and external interface devices. The -1 grade is appropriate when a design requires a large amount of parallel logic but does not require the timing margin of a faster speed grade. Bitstream configuration, clocking, power sequencing, and transceiver operation must follow the Kintex-7 design guidance in DS182.
Typical uses include industrial Ethernet interfaces, 10-gigabit Ethernet signal processing, PCIe Gen3 endpoint or root-port designs, network packet processing, radar and test-equipment front ends, high-speed data acquisition, and embedded control systems with substantial parallel processing. The 400-I/O count also supports board-level integration of memories, transceivers, clocks, sensors, and high-speed board interfaces when the electrical and pin-count constraints of the FCBGA-676 package are satisfied.
The 676-ball FCBGA package demands careful PCB design, including controlled impedance routing, dense via arrays, adequate power-plane connectivity, and thermal management beneath the device. Designers should use the complete pinout, recommended decoupling network, and package-specific land pattern from DS182 rather than relying on generic BGA guidance. Configuration, clock, serial-transceiver, and JTAG signals should be validated for signal integrity before a production layout is released.
This product record combines the Kintex-7 architecture, FCBGA-676 package characteristics, temperature and speed-grade distinctions, package-compatible alternatives, and practical PCB guidance. It supports direct part selection when the design needs 162,240 logic cells, 400 I/O, and the -1 industrial-grade Kintex-7 configuration in one 676-ball package.
חלופות תחליף ישיר עבור XC7K160T-1FBG676I — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם XC7K160T-1FBG676I (אותו גורם צורה וטביעת רגל) — שונים ב Device Type, Package, Process Technology, Speed Grade, Logic Cells.
XC7K160T-1FBG676C
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←XC7K160T-1FB676I
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←XC7K160T-2FBG676C
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←XC7K160T-3FBG676I
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
XC7K160T-1FBG676I דירוגים מרביים ומאפיינים חשמליים
| Device Type | Kintex-7 Field-Programmable Gate Array (FPGA) |
| Logic Elements | 162,240 LE |
| Adaptive Logic Modules | 25,350 ALM |
| User I/O Count | 400 I/O |
| Embedded Memory | 11.43 Mbit |
| Process Technology | 28 nm |
| Core Voltage | 970 mV to 1.03 V |
| מתח אספקה פעיל | 1.2 V to 3.3 V |
| Speed Grade | -1 |
| Minimum Operating Temperature | -40°C |
| Maximum Operating Temperature | +100°C |
| מארז | 676-BBGA, FCBGA |
| סוג הרכבה | Surface Mount |
| Series | Kintex-7 |
מדריך תצורת פינים של XC7K160T-1FBG676I 676-bbga, fcbga
תצורת פינים עבור XC7K160T-1FBG676I (מארזת 676-bbga, fcbga). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור XC7K160T-1FBG676I.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
XC7K160T-1FBG676I מתאים עבור 6 יישוםs: Industrial Ethernet Packet Processing, PCIe Gen3 Endpoint Equipment, 10-Gigabit Ethernet Interface, Radar and High-Speed Test Equipment, High-Speed Data Acquisition, Embedded Control and Instrumentation.
Industrial Ethernet Packet Processing
The XC7K160T-1FBG676I fits industrial Ethernet equipment that must process frames, maintain protocol state, and exchange data with multiple external interfaces. Its 162,240 logic cells, 400 user I/O, and 11.43 Mbit embedded memory allow parallel packet classification, buffering, and control functions to be consolidated in one FPGA. The -40°C to +100°C operating range is appropriate for factory-floor equipment that must operate beyond commercial temperatures. Designers should use the Kintex-7 transceiver and clocking guidance in DS182 when implementing high-speed interfaces, and they should reserve time for timing closure at the -1 speed grade.
מומלץ
PCIe Gen3 Endpoint Equipment
The XC7K160T-1FBG676I is well suited to PCIe Gen3 endpoint and data-plane designs because the Kintex-7 family combines high-speed serial transceivers with a large programmable-logic fabric. Engineers can implement transaction layers, DMA engines, data movement, and control functions in parallel instead of relying on a fixed processor architecture. The device's 400 I/O provide substantial integration capacity for local memories, status interfaces, clocks, and test points. A successful design must follow the applicable PCIe reference design, confirm transceiver pin assignments from the package table, and verify power sequencing and signal integrity under the required industrial temperature range.
מומלץ
10-Gigabit Ethernet Interface
The XC7K160T-1FBG676I can serve as the programmable engine behind a 10-gigabit Ethernet interface by combining serial transceiver resources, parallel packet logic, DSP blocks, and embedded memory. The 162,240-cell fabric provides room for framing, search, classification, aggregation, and monitoring functions, while 400 I/O support ancillary interfaces. Kintex-7 devices are identified as supporting 10-gigabit Ethernet solutions, but implementation quality depends on reference-clock selection, transceiver configuration, equalization, packet-memory bandwidth, and timing closure. Use the manufacturer transceiver and clock-management guidance rather than approximating the high-speed interface constraints.
מומלץ
Radar and High-Speed Test Equipment
The XC7K160T-1FBG676I supports radar, instrumentation, and high-speed test systems that require parallel sampling, digital filtering, correlation, and real-time data movement. Its 25,350 ALM and 11.43 Mbit embedded memory allow multiple parallel pipelines to operate concurrently, while DSP resources accelerate fixed-point and floating-point processing commonly used in signal conditioning. The -1 speed grade provides a defined timing target for the design, and industrial temperature support is useful in equipment deployed outside controlled environments. Engineers should budget for BGA thermal management, split power rails, and high-speed memory routing.
מומלץ
High-Speed Data Acquisition
The XC7K160T-1FBG676I is appropriate for high-speed data-acquisition systems that must ingest multiple channels and perform filtering, triggering, decimation, and buffering in real time. The FPGA's 400 I/O, programmable logic, DSP capability, and embedded memory support parallel channel processing without relying on a general-purpose processor for every operation. Kintex-7 high-speed transceivers can also support board-to-board or chip-to-chip links when the pinout and reference-design requirements are satisfied. Practical implementations should use short matched routes for high-speed inputs, independent power filtering for each voltage group, and careful thermal analysis of the 676-ball FCBGA.
מומלץ
Embedded Control and Instrumentation
The XC7K160T-1FBG676I can implement deterministic embedded control, sequencing, signal conditioning, and communications in industrial instrumentation. Its large logic fabric allows multiple control domains and diagnostic functions to operate concurrently, while the extensive I/O count simplifies connections to sensors, actuators, memory, and display or communication peripherals. The -40°C to +100°C range supports demanding industrial installations. Designers should partition real-time functions, add watchdog and fail-safe mechanisms, and validate clock-domain crossings. The package's high pin count also means that manufacturing escape routing, inspection, and assembly capability must be confirmed before committing to the design.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור XC7K160T-1FBG676I — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | XC7K160T-1FBG676C | XC7K160T-1FB676I | XC7K160T-2FBG676I | XC7K160T-2FBG676C | XC7K160T-3FBG676I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 676-BBGA, FCBGA | 676-BBGA, FCBGA - same | 676-BBGA, FCBGA - package code requires drawing check | 676-BBGA, FCBGA - same | 676-BBGA, FCBGA - same | 676-BBGA, FCBGA - same |
| Series | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 |
| Speed Grade | -1 | -1 | -1 | -2 | -2 | -3 |
| Temperature Grade | Industrial, -40°C to +100°C | Commercial, 0°C to +85°C | Industrial, -40°C to +100°C | Industrial, -40°C to +100°C | Commercial, 0°C to +85°C | Industrial, -40°C to +100°C |
מבדילים עיקריים
- Retains the full industrial temperature range within the same FBG676 package family (לעומתXC7K160T-1FBG676C)
- Provides the specified -1 performance grade without changing the speed class (לעומתXC7K160T-2FBG676I)
- Combines 162,240 logic cells with 400 user I/O in the target FBG676 package (לעומתXC7K160T-1FFG676I)
- Matches the -1 industrial resource configuration without a commercial temperature downgrade (לעומתXC7K160T-2FBG676C)
הערות תכנון
Treat the 676-ball FCBGA as a major thermal-design component. Place the device over a continuous ground plane with a dense via array and apply the package-specific land pattern from DS182 (v2.16). Use the manufacturer's power-dissipation and thermal characterization data for worst-case activity and temperature rather than assuming the logic-cell count alone determines junction temperature. Validate with power-plane current measurements and thermal simulation before production because high-speed I/O, transceivers, and dynamic logic can materially change device heating.
Use the complete XC7K160T FBG676 ball map and recommended footprint rather than a generic 676-BBGA drawing. Separate the core, I/O, auxiliary, and transceiver supplies exactly as directed in the manufacturer power guide, and place the required bulk and high-frequency decoupling capacitors near their associated supply balls. Pay particular attention to the exposed thermal ball area and ground-via connectivity, because a mechanically correct footprint can still produce inadequate thermal performance if the central balls are poorly connected.
Route high-speed serial and differential interfaces as controlled-impedance, length-matched structures referenced to a continuous ground plane. Avoid plane splits beneath high-speed pairs, minimize stubs and unnecessary vias, and apply the transceiver reference-clock and package-routing guidance from the Kintex-7 documentation. Validate inter-pair skew, insertion loss, return loss, and jitter with the actual board stackup and connector or package-loading assumptions rather than relying only on schematic connectivity.
Follow the prescribed power-on and power-off sequence for every supply rail and use independent filtering where the design guidance separates the core and I/O rails. Estimate regulator headroom and transient current from the actual switching activity and selected I/O standard, then confirm that the power source, inductors, capacitors, and plane geometry remain stable at the -1 speed grade. A speed-grade change to -2 or -3 can alter dynamic power and timing, so it should not be treated as a transparent electrical substitution.
Do not interpret a shared 676-ball count as proof that every Kintex-7 package suffix has an identical ball map. XC7K160T-1FFG676I uses a different package identifier from XC7K160T-1FBG676I, so it must not be treated as a drop-in replacement without checking the package drawings. Similarly, changing the temperature suffix or speed grade can affect qualification, timing closure, power, and thermal design. Compare every suffix position before approving a substitution.
מידע על תאימות
The commercial-grade FBG676 ordering code indicates a lead-free package identifier, but separate RoHS, REACH, halogen-free, and conflict-minerals declarations were not identified for the exact MPN. AEC-Q100 is not applicable because this is an FPGA rather than an automotive-qualified analog or mixed-signal component.