מוצרים (46,000+)

XC9572XL-5CS48C - 72-Macrocell CPLD 5ns 3.3V | AMD/Xilinx
XC9572XL-5CS48C

XC9572XL-5CS48C - 72-Macrocell CPLD 5ns 3.3V | AMD/Xilinx

The AMD (Xilinx) XC9572XL-5CS48C is a 3.3V in-system-programmable CPLD with 72 macrocells, 1600 usable gates, and 38 user I/O pins, delivering a fast 5 ns pin-to-pin propagation delay (tPD) in a 48-ball CSBGA (7x7 mm) package. A Complex Programmable Logic Device (CPLD) is a class of programmable logic that sits between simple PAL/GAL devices and large FPGAs in the digital-logic hierarchy. CPLDs implement sum-of-products logic arrays with deterministic, pin-to-pin timing, making them ideal for glue logic, address decoding, bus interfacing, and power-on state machine control where predictable delays matter more than logic density. Key features of the XC9572XL-5CS48C include 5 ns worst-case propagation delay, system frequencies up to 178.6 MHz, and the industry-standard XC9500XL architecture built on a 0.35 micron CMOS Flash process. Every macrocell is fully configurable, and the device supports in-system programming (ISP) with a minimum of 10,000 program/erase cycles per AMD product documentation. Flash retention is specified for 20 years, and individual macrocells provide product-term allocation, local feedback, and set/reset controls. The FastFLASH technology combines a flash memory cell with the proven XC9500 switch matrix, giving designers low standby power - important for battery-backed and always-on 3.3V systems - while eliminating configuration PROMs required by SRAM-based FPGAs. The 48-ball chip-scale BGA footprint minimizes board area while offering the power integrity and signal integrity advantages of distributed power and ground balls. Typical applications include address decoding and bus control in embedded processors, glue-logic consolidation replacing multiple 74-series devices, power-supply sequencing and reset management, industrial control I/O expansion, and communication-interface bridging. The commercial temperature rating (suffix C) suits office and laboratory environments. Designers should observe AMD power-management guidelines: the device supports a standby mode with greatly reduced ICC, and unused I/O should be terminated as recommended in the datasheet (DS057). Because the package is a BGA, rework requires a reflow station, so verify footprint land patterns per AMD package drawings. This page adds value beyond the datasheet by compiling drop-in same-family alternatives with speed-grade and temperature-suffix differences, distributor price evidence, practical design notes, and application guidance in one place.

RFQ צור קשר
XC9572XL-5VQ44C - 72-Macrocell 3.3V CPLD TQFP-44 | AMD Xilinx
XC9572XL-5VQ44C

XC9572XL-5VQ44C - 72-Macrocell 3.3V CPLD TQFP-44 | AMD Xilinx

The AMD (Xilinx) XC9572XL-5VQ44C is a high-performance, low-voltage CPLD (Complex Programmable Logic Device) with 72 macrocells and 1600 usable gates, housed in a 44-pin VQFP (TQFP-44) package and rated for commercial temperature operation as indicated by the C suffix. A CPLD is a type of programmable logic device that sits between simple programmable logic devices (SPLDs such as GAL and PAL) and large FPGAs in the programmable-logic hierarchy. It consists of multiple function blocks with macrocells interconnected through a programmable switch matrix, delivering deterministic pin-to-pin timing that FPGAs cannot guarantee. This makes CPLDs ideal for glue logic, state machines, address decoding, and power-up configuration control in embedded systems. The XC9572XL family belongs to the low-voltage branch of the classic XC9500 CPLD family, operating from a 3.3V supply, which reduces power consumption and simplifies integration with modern low-voltage logic. Key features include in-system programmability (ISP), 10,000 program/erase cycles of Flash endurance, and the FastFlash zero-power technology that combines very low standby current with high speed. The -5 speed grade denotes the fastest commercial timing grade in the family. Architecturally, each macrocell is a fully flexible, registered function unit that can implement combinational or sequential logic, with product-term steering providing high DFT (design-for-test) flexibility. The switch matrix routes signals between function blocks and I/O pins with predictable, uniform delays, which is why the family is prized for timing-critical control logic and bus interfaces. Typical applications include bus-interface bridging, address decoding in microprocessor systems, power-sequencing and reset control, legacy logic consolidation, and as a configuration controller companion for larger FPGAs. Retro-computing and industrial-control designs frequently adopt this part for its deterministic timing and reprogrammability. When designing with this device, program it using the AMD/Xilinx ISE toolchain, which remains the supported software for the XC9500XL family; verify the JEDEC programming file targets the exact speed grade and package suffix. Note that ISE no longer installs natively on Windows 10, so plan a compatible tool environment early in the project. This page adds engineering value beyond the manufacturer datasheet (DS057) by compiling drop-in same-family alternatives, a parametric comparison table, practical design notes, and sourcing guidance in one place.

RFQ צור קשר
XC9572XL-5VQ64C - 72-Macrocell 3.3V CPLD 5ns | AMD Xilinx
XC9572XL-5VQ64C

XC9572XL-5VQ64C - 72-Macrocell 3.3V CPLD 5ns | AMD Xilinx

The AMD (Xilinx) XC9572XL-5VQ64C is a high-performance 3.3V CPLD with 72 macrocells, 1600 usable gates, 52 user I/O pins, and a maximum propagation delay of 5 ns, housed in a 64-pin TQFP (VQ64) package for commercial temperature ranges. A CPLD (Complex Programmable Logic Device) is a class of programmable logic that sits between simple PAL/GAL devices and large FPGAs in the programmable logic hierarchy. CPLDs use macrocell-based architecture with wide, fast AND/OR arrays that deliver deterministic, pin-to-pin timing, making them ideal for glue logic, state machines, bus interfacing, and power-up management tasks that require guaranteed timing and instant-on behavior. Key features of the XC9572XL family include in-system programmability (ISP) with a minimum of 10,000 program/erase cycles, 3.3V internal supply operation from 3V to 3.6V, and a maximum clock frequency of 178.6 MHz. The device provides 36 inputs and 36 outputs with 52 I/O lines available to the user, organized into four dedicated logic array blocks (function blocks). Architecturally, the XC9572XL consists of function blocks connected by a FastCONNECT switch matrix. Each macrocell includes a registers/flip-flop that can be configured as D, T, or JK type, with individual product-term control of clock, set, and reset. The 5 ns tpd version (-5 speed grade) is the fastest in the XC9572XL lineup, and the low-voltage process reduces power consumption compared to the earlier 5V XC9500 family. Typical applications include telecom and networking line-card glue logic, industrial automation control interfaces, 5G infrastructure board management, medical instrumentation, and legacy FPGA/CPU bus-bridging designs. The instant-on, non-volatile configuration eliminates the external configuration flash required by SRAM FPGAs, simplifying power sequencing. Design consideration: verify both a 3.3V tolerant I/O budget and the 10,000-cycle program/erase endurance limit; frequent field reprogramming beyond the endurance rating can degrade flash cells. Use the AMD iMPACT tool with the standard JTAG chain for in-system programming. This page adds value beyond the manufacturer datasheet by consolidating drop-in alternatives, application guidance, procurement channels, and practical design notes for the XC9572XL-5VQ64C in one place.

RFQ צור קשר
XC9572XL-5VQG64C - 72-Macrocell 5 ns CPLD | AMD | VQFP-64
XC9572XL-5VQG64C

XC9572XL-5VQG64C - 72-Macrocell 5 ns CPLD | AMD | VQFP-64

AMD XC9572XL-5VQG64C is a 72-macrocell complex programmable logic device providing 1,600 usable gates, 52 user I/O pins, and a 5 ns propagation-delay option in a 64-pin VQFP package. It operates from a 3.3 V supply and uses four dedicated logic array blocks to implement general-purpose combinational and sequential logic. A CPLD is a programmable logic device positioned between simple PAL/GAL logic and larger FPGAs. Its macrocells combine programmable AND/OR logic with registered outputs, allowing compact implementations of control logic, interface translation, decoding, counters, and state machines. The XC9572XL belongs to the Xilinx XC9500XL family and is targeted at low-voltage communications and computing systems requiring deterministic logic implementation without a large FPGA configuration memory or complex routing fabric. The device contains 72 macrocells, 1,600 usable gates, and 52 user I/O pins. Its 5 ns speed designation identifies the device as the fastest specified grade in the target family. The 3.3 V operating supply and low-voltage architecture suit modern control and interface systems, while in-system programming permits configuration without removing the device from its assembled circuit. The programming interface can support repeated field updates when the system provides the required control logic and power management. Functionally, the four logic array blocks connect to peripheral input and output blocks through the internal interconnect. Each macrocell can implement combinational equations, registered functions, and product-term feedback according to the device architecture described in AMD datasheet DS057. This structure provides more predictable timing for fixed logic than a general-purpose FPGA and remains useful for legacy equipment, industrial controllers, communication interfaces, and compact glue-logic designs that must reproduce an established CPLD design. Typical applications include protocol-interface logic, data-format conversion, bus arbitration, peripheral control, address decoding, industrial automation, and embedded system sequencing. The 52 user I/O pins are particularly useful when a design needs numerous moderate-speed digital connections without moving to a larger programmable-logic device. Legacy replacement projects can also benefit from the device's combination of 72 macrocells, 1,600 usable gates, and in-system programmability. Design work should begin by confirming that the existing schematic, PCB footprint, pin assignments, and programming algorithm match the 64-pin VQFP device. Stable power sequencing, input conditioning, output loading, and programming-signal integrity are essential because CPLD behavior depends on correct configuration and power delivery. The exact pin names, programming algorithm, and electrical limits should be taken directly from the AMD datasheet and device documentation before layout release. This product page combines the XC9572XL device characteristics with same-family replacement options, package-aware comparisons, application guidance, and practical design checks. It helps engineers identify the correct speed grade, assess migration options, and plan PCB or firmware work without overlooking configuration, supply, and timing constraints.

RFQ צור קשר
XC9572XL-7PC44I - 72-Macro-Cell 3.3V CPLD | AMD Xilinx
XC9572XL-7PC44I

XC9572XL-7PC44I - 72-Macro-Cell 3.3V CPLD | AMD Xilinx

AMD Xilinx XC9572XL-7PC44I is a 3.3 V, 72-macro-cell complex programmable logic device with a 7.5 ns performance grade, supplied in a 44-terminal square PLCC package. It combines non-volatile configuration storage, in-system programmability, boundary-scan support, hot-plugging capability, and 3.3 V operation for compact control, glue-logic, and interface designs. The device is identified by the industrial temperature grade and the PC44 package designation. A complex programmable logic device, or CPLD, is a programmable semiconductor positioned between simple fixed-function logic and FPGA resources. Its macrocell architecture provides product-term Boolean logic, registers, and programmable interconnect for implementing control logic, state machines, bus arbitration, protocol conversion, and peripheral interfaces. The XC9572XL belongs to the broader hierarchy of programmable logic devices, which includes simple PLDs, CPLDs, and FPGAs. Key characteristics include 72 macro cells, 44 package terminals, a 3.3 V supply, and a 7.5 ns speed grade. Individual output-enable control, local output inversion, input hysteresis, bus-hold capability, and per-pin input features improve implementation flexibility. Flash-based configuration preserves the implemented logic when power is removed, avoiding separate programming after every power cycle. The device supports a mixture of combinational and registered logic in one package, making it useful for designs that need more deterministic control than a basic PAL or GAL while avoiding the resource scale and complexity of larger FPGAs. Its PLCC package provides 44 physical terminals for board-level assembly, and the family documentation describes in-system programming and boundary-scan-compatible operation. Typical uses include industrial controller logic, data-acquisition interfaces, legacy peripheral emulation, automated-test equipment, sensor conditioning, motor-control sequencing, and communication bridge logic. The 72-macro-cell capacity is particularly appropriate for multiple state machines, bus controls, and protocol interfaces that must retain their configuration during power interruptions. Designers should preserve the device's required power, programming, and configuration behavior exactly as described in the manufacturer data sheet. PCB allocation must follow the 44-terminal PLCC footprint and its pin designations, while software, design-entry, programming-cable, and in-system-programming choices must be checked against the legacy XC9500XL tool flow before schematic capture begins. This product page consolidates the verified manufacturer specifications, package details, programming references, lifecycle position, and available drop-in family alternatives. It also provides practical selection and replacement guidance that helps engineers distinguish speed-grade, temperature-grade, and package differences before approving a substitution.

RFQ צור קשר
XC9572XL-7PCG44C - 72-Macrocell 3.3V CPLD | AMD
XC9572XL-7PCG44C

XC9572XL-7PCG44C - 72-Macrocell 3.3V CPLD | AMD

The AMD XC9572XL-7PCG44C is a 72-macrocell, in-system-programmable complex programmable logic device operating at 3.3 V, with 34 user I/O and a 44-terminal square surface-mount package. Its four function blocks provide 1,600 usable gates, while the -7 speed grade corresponds to a 5 ns propagation delay. A CPLD is a programmable digital logic device that combines reconfigurable logic structures with nonvolatile configuration memory. In the broader semiconductor hierarchy, a CPLD belongs to programmable logic devices alongside FPGAs and PAL devices. It is positioned between simple fixed logic and larger FPGAs: designs can implement multiple state machines, interface controllers, counters, address decoding, and glue logic while retaining the programming tools and deterministic architecture associated with the XC9500XL family. The XC9572XL-7PCG44C provides 72 macrocells, 34 user I/O pins, 1,600 usable gates, and four 54V18 function blocks. Its 3.3 V operating supply supports integration with contemporary CMOS control logic. In-system programmability supports at least 10,000 program or erase cycles, allowing the configuration to be updated without removing the device from its circuit. Commercial temperature grading and RoHS-compliant, lead-free construction suit industrial, communications, instrumentation, and embedded-control equipment. The device uses a deterministic CPLD architecture in which interconnected macrocells implement combinational and registered logic. The -7 grade identifies its timing class, with a stated 5 ns propagation delay. This figure is useful for preliminary timing planning, but each design must also satisfy the setup, hold, clock, and I/O constraints in AMD datasheet DS057. The XC9572XL family was designed for compact logic consolidation and legacy programmable-logic migration. Typical uses include peripheral interface logic, data-format conversion, bus arbitration, industrial control sequencing, test-instrument signal conditioning, and embedded communications. A design can combine several formerly discrete PAL, GAL, or small CPLD functions into one programmable device, reducing board area and simplifying firmware-managed configuration workflows. The 34 available I/O pins are especially useful for parallel buses, control signals, and status indicators. Designers should treat configuration retention, pinout, supply sequencing, and timing constraints as the principal implementation checks. Confirm the exact package drawing and pin assignments in AMD datasheet DS057 before layout. Because this is a mature programmable-logic family, software-tool availability, programmer hardware, and lifecycle support should also be evaluated before committing a new production design. This page combines device-level specifications, lifecycle considerations, pin and programming guidance, and qualified same-package comparison information to support legacy CPLD maintenance, cross-reference, and design-review decisions without replacing the manufacturer’s complete datasheet.

RFQ צור קשר
XC9572XL-7PCG44I - Obsolete 72-Macro CPLD | AMD/Xilinx
XC9572XL-7PCG44I

XC9572XL-7PCG44I - Obsolete 72-Macro CPLD | AMD/Xilinx

AMD/Xilinx XC9572XL-7PCG44I is an obsolete XC9500XL high-performance complex programmable logic device (CPLD) with 34 user I/O, a 44-LCC J-lead surface-mount package, and an industrial ambient-temperature rating of -40°C to 85°C. The -7 speed designation identifies a 7 ns performance class, while the PCG44 suffix identifies the 44-pin J-lead package and the I suffix identifies industrial-temperature processing. A CPLD is a programmable logic device that combines multiple programmable logic blocks, embedded memory, and dedicated input/output structures into a single integrated circuit. In the broader semiconductor hierarchy, the XC9572XL belongs to the programmable-logic family, alongside FPGAs, complex PLDs, and simpler PAL/GAL devices. Its fixed architecture provides predictable timing and a unified nonvolatile configuration approach for consolidating glue logic, control functions, interfaces, and state machines into one component. Key documented characteristics include 34 user I/O, 44 package terminals, industrial-temperature operation, and a 16.59 mm by 16.59 mm LCC package. The product is cataloged as obsolete, so new-production planning should account for lifecycle constraints. Its 7 ns speed class is relevant where propagation delay and system timing margins matter more than device availability. The J-lead package also provides a mechanically distinct alternative to fine-pitch QFP packages used by other members of the XC9500XL family. The XC9572XL architecture is intended for designs requiring medium-complexity programmable logic rather than FPGA-level resources. It can be used to implement bus arbitration, address decoding, control sequencing, data formatting, legacy interface adaptation, and peripheral glue logic. Because a CPLD combines programmable logic and dedicated I/O resources in one package, a design can reduce component count and simplify PCB routing when its available macro and memory resources satisfy the application. Typical uses include industrial controller interfaces, legacy peripheral adapters, programmable control panels, protocol bridges, and embedded system support logic. The 34-I/O configuration is useful for parallel control buses and multi-bit data paths, while the industrial temperature range supports equipment intended for extended indoor and industrial environments. Designs requiring broader logic capacity, more memory, or newer supported tooling should evaluate a current programmable-logic platform before committing the design to this legacy family. PCB design should preserve the exact 44-LCC footprint, pin assignment, and programmed pin behavior of the original design. Review the manufacturer datasheet DS057 for the complete pin description, configuration requirements, timing tables, and recommended decoupling practices. Do not treat a same-capacity device with a different package suffix as a footprint-compatible substitute; board redesign or respin may be required. This page consolidates lifecycle information, package constraints, structured alternatives, and practical design guidance around the XC9572XL-7PCG44I. For obsolete-device procurement, the XAIPART Request a Quote form is the appropriate channel for checking exact MPN availability, condition, packaging, and delivery requirements before placing a production order.

RFQ צור קשר
XC9572XL-7VQ44C - 72-Macrocell 3.3V CPLD | AMD
XC9572XL-7VQ44C

XC9572XL-7VQ44C - 72-Macrocell 3.3V CPLD | AMD

AMD XC9572XL-7VQ44C is a 72-macrocell in-system-programmable CPLD operating from a 3.3 V supply, providing 34 user I/O pins, 1,600 usable gates, and four 54V18 function blocks in a 44-pin VQFP package. The -7 speed designation identifies a nominal 5 ns propagation-delay class within the XC9500XL high-performance CPLD family. A complex programmable logic device, or CPLD, is a programmable logic device within the broader FPGA and CPLD category. It combines nonvolatile programmable logic with a relatively simple, deterministic architecture for control logic, interface adaptation, bus decoding, state-machine implementation, and glue logic. Unlike a mask-programmed logic device, a CPLD can be configured or reconfigured by the system designer, making it useful for prototypes, production equipment, and field-updatable embedded systems. The XC9572XL offers individual output enable per output pin, local inversion, input hysteresis on user and boundary-scan pins, bus-hold circuitry on user inputs, and hot-plugging support. Its in-system programming capability supports at least 10,000 program or erase cycles. These features make the device suitable for compact control platforms requiring configurable logic and reusable board-level programming interfaces. Internally, the device contains four 54V18 function blocks and 72 macrocells organized into 1,600 usable gates. The architecture provides a practical balance between logic density, predictable timing, and design simplicity. The 3.3 V operating supply and 34 available I/O positions make the device especially useful in modern embedded control systems where a small FPGA would add unnecessary complexity or cost. Typical uses include industrial control interfaces, peripheral bus decoding, encoder and sensor signal conditioning, display-control logic, communication protocol interfaces, and low-power supervisory sequencers. In each case, the CPLD can consolidate discrete glue logic while preserving a straightforward programming and verification workflow. PCB design should preserve the manufacturer-specified pin assignments, power routing, and programming interface connections. Because the target is a 44-pin VQFP device, adequate escape routing and careful decoupling are essential. Confirm the exact package drawing, voltage ratings, and pin definitions against the manufacturer datasheet before fabrication or replacement. This page combines the XC9572XL technical characteristics, compatible speed-grade alternatives, application guidance, and design-focused comparison points to support device selection, schematic review, PCB planning, and lifecycle risk assessment.

RFQ צור קשר
XC9572XL-7VQ44I - 72-Macro-Cell 3.3V CPLD | AMD
XC9572XL-7VQ44I

XC9572XL-7VQ44I - 72-Macro-Cell 3.3V CPLD | AMD

AMD XC9572XL-7VQ44I is a 3.3 V complex programmable logic device with 72 macro cells, four 54V18 function blocks, 1,600 usable logic gates, and a 7.5 ns propagation delay in a 44-pin VQFP package. The -7 speed grade targets designs requiring faster logic response than the 10 ns grade while retaining the established XC9500XL architecture. A complex programmable logic device is a programmable digital logic category combining reconfigurable logic fabric, programmable interconnect, and user-defined input/output blocks. In the product hierarchy, a CPLD is a programmable-logic IC and sits alongside FPGA & CPLD devices. The XC9572XL family targets low-voltage communications, computing, industrial control, and embedded interface applications where deterministic logic, modest gate capacity, and nonvolatile configuration are useful. Key features include 72 macro cells, four 54V18 function blocks, 1,600 usable gates, and a family propagation delay of 5 ns. The specific -7 suffix identifies a 7.5 ns device speed grade according to the distributor specification, while the I suffix identifies the industrial-temperature ordering option. Its 3.3 V operating supply supports modern low-voltage logic systems, and the 44-pin VQFP package provides a compact surface-mount footprint. Internally, the XC9572XL architecture divides logic into four 54V18 function blocks. Their outputs connect through dedicated interconnect to programmable I/O blocks, allowing board-level logic to be consolidated into a single configurable device. This architecture is useful for bus decoding, address and command generation, protocol bridging, state machines, and fixed-function glue logic without occupying a large FPGA. Typical uses include communications line-card control, embedded processor peripherals, industrial interface modules, test and measurement logic, data-acquisition control, and general-purpose board support logic. The 1,600-gate device is particularly appropriate when logic requirements remain modest and deterministic implementation is preferable to a soft processor or a much larger FPGA. For PCB implementation, use the DS057 pinout and package information, preserve the manufacturer-specified decoupling and configuration requirements, and verify every signal against the 3.3 V domain. Programming support must also be checked against the installed AMD/Xilinx design environment and programmer before committing to an industrial design. This page combines manufacturer architecture details, package and ordering information, practical CPLD design guidance, and a restrained replacement assessment. It distinguishes true same-footprint family options from broader functional alternatives so engineers can focus first on pin-level and timing compatibility.

RFQ צור קשר
XC9572XL-7VQ64C - 72-Macrocell 3.3V CPLD | AMD
XC9572XL-7VQ64C

XC9572XL-7VQ64C - 72-Macrocell 3.3V CPLD | AMD

AMD XC9572XL-7VQ64C is a 72-macrocell complex programmable logic device operating from a 3.3 V supply in a 64-pin VQFP package. It combines a 125 MHz device speed rating with a 7.5 ns stated propagation performance, making it suitable for deterministic glue logic, interface control, bus decoding, and legacy system-integration designs. The device belongs to the XC9500XL high-performance CPLD family. A CPLD is a programmable digital logic device that combines a structured array of macrocells with a global interconnect. Unlike a software-driven processor, a CPLD executes combinational and registered logic directly in hardware. Within the semiconductor hierarchy, this part is a complex programmable logic device, a user-programmable logic device, and ultimately an integrated circuit designed for deterministic logic implementation. The XC9500XL architecture provides individual output enable for each output pin, local inversion, input hysteresis on user and boundary-scan inputs, and bus-hold circuitry on user inputs. These features support dependable control of external signals, improved noise tolerance, and stable handling of partially driven buses. The family also supports hot-plugging capability and IEEE boundary-scan-oriented verification functions. For the XC9572XL-7VQ64C, the 72-macrocell architecture provides a practical balance between logic density and design effort. A 7 ns speed grade and 125 MHz maximum operating frequency support communication, control, and data-processing functions that require predictable timing. The 64-pin VQFP package provides 52 user I/O according to the published family listing while leaving dedicated supply and configuration functions. Typical applications include legacy peripheral emulation, printer and industrial-control interfaces, programmable logic glue, bus arbitration, data-format conversion, and system boot or sequencing logic. The in-system programming architecture also supports board-level configuration workflows where a programmed device must be updated without removing it from its assembled circuit. Designers should preserve the XC9500XL power architecture and decoupling strategy, leave configuration and test behavior consistent with the AMD DS057 data sheet, and verify every external interface against the selected package pinout. Device selection also requires checking tool-chain compatibility because this established CPLD family is normally programmed with AMD/Xilinx CPLD development tools and appropriate JTAG programming hardware. This product page combines the AMD family architecture, verified family variants, pin-compatible alternatives, application guidance, and practical implementation considerations in one engineering-focused reference. It supports faster device identification while highlighting the speed-grade and temperature-grade distinctions that can affect an existing design.

RFQ צור קשר
XC9572XL-7VQ64I - 3.3V CPLD 72MC 7.5ns 64-TQFP | Xilinx
XC9572XL-7VQ64I

XC9572XL-7VQ64I - 3.3V CPLD 72MC 7.5ns 64-TQFP | Xilinx

The AMD/Xilinx XC9572XL-7VQ64I is a 3.3 V in-system programmable CPLD with 72 macrocells, 1600 usable gates, 52 user I/O pins and a maximum propagation delay of 7.5 ns, housed in a 64-pin TQFP (VQ64) package with 0.5 mm lead pitch. A Complex Programmable Logic Device (CPLD) is a family of programmable logic ICs that sits between simple SPLDs (such as GAL and PAL devices) and large FPGAs in the programmable logic hierarchy. CPLDs use a macrocell-based architecture with a deterministic pin-to-pin delay, making them well suited to glue logic, bus interface, state machine and power-sequencing tasks where predictable timing and instant-on operation matter more than logic density. The XC9572XL belongs to the FastFLASH XC9500XL high-performance, low-voltage CPLD family targeted at leading-edge communications and computing systems where device reliability and low power dissipation are important. Key features include individual output enable per output pin with local inversion, input hysteresis on all user and boundary-scan pin inputs, bus-hold circuitry on all user pin inputs, and hot-plugging capability. Every XC9500XL device supports in-system programming (ISP) with a minimum of 10,000 program/erase cycles, and full IEEE Std 1149.1 (JTAG) boundary-scan, giving engineers superior debug and design-iteration capability without removing devices from the board. The -7 speed grade delivers 7.5 ns maximum pin-to-pin propagation delay, and the industrial temperature rating (-40C to +85C) qualifies the part for harsh environments. Lead finish is tin with 0.5 mm lead pitch per the manufacturer product information. Typical applications include communications and networking line-card glue logic, industrial control state machines, bus-interface and address-decode functions, and microprocessor power-management sequencing, where a deterministic 7.5 ns delay and instant power-up behavior outperform FPGA-based solutions. Design consideration: the XC9500XL family is programmed with the legacy Xilinx ISE toolchain, so confirm toolchain availability in your development environment before committing to new designs; bus-hold on unused inputs removes the need for external pull resistors. This page adds value beyond the manufacturer datasheet by synthesizing distributor availability, drop-in same-package alternatives, selection guidance, and practical design notes in one place.

RFQ צור קשר
XC9572XL-7VQG44C 72-Macrocell CPLD, 5 ns, 44 VQFP | AMD
XC9572XL-7VQG44C

XC9572XL-7VQG44C 72-Macrocell CPLD, 5 ns, 44 VQFP | AMD

AMD XC9572XL-7VQG44C is a 3.3 V high-performance CPLD with 72 macrocells, 34 user I/O pins, and a 5 ns pin-to-pin logic delay in a 44-pin VQFP package. The device provides approximately 1,600 usable gates and supports system frequencies up to 178 MHz. Its -7 speed designation identifies the 5 ns performance class, while the G suffix identifies the industrial-temperature ordering option. A CPLD, or complex programmable logic device, is a user-programmable semiconductor that combines non-volatile configuration memory with interconnected logic arrays. In the product hierarchy, a CPLD belongs to programmable logic devices alongside FPGAs and other logic devices. It sits below a microcontroller in general-purpose processing capability, but offers deterministic hardware logic that continues operating without software execution. The XC9500XL architecture is intended for compact control, interface, decoding, and glue-logic designs. Key features of the XC9572XL-7VQG44C include four 54V18 function blocks, 72 macrocells, 1,600 usable gates, 34 user I/O pins, 5 ns pin-to-pin logic delays, and operation from a 3.3 V core supply. The 44-pin VQFP format supports a compact surface-mount implementation, while the -7 grade favors timing performance over the slower -10 variant. Non-volatile configuration storage allows the programmed logic design to remain available after power is removed. The XC9500XL architecture is optimized for high-performance communications and computing systems. Each macrocell provides programmable combinational and registered logic, allowing control signals, state machines, bus decoding, protocol interfaces, and data-routing functions to be consolidated into one programmable device. The family provides substantially more logic capacity than basic GAL-type devices while maintaining a comparatively simple programming workflow and a modest 72-macrocell footprint. Typical uses include industrial control interfaces, communications equipment, test and measurement systems, peripheral controllers, legacy bus interface logic, and embedded system support functions. A design can use the 34 available I/O pins for external data buses, control signals, status indicators, and clocked interfaces. The 178 MHz system-frequency figure describes the supported logic performance class, while the 5 ns pin-to-pin delay provides the more useful timing target for many board-level designs. Designers should verify signal-integrity and timing requirements against the manufacturer data sheet, especially for high-speed outputs, external memory interfaces, and fanout-sensitive nets. The 44-pin surface-mount package also requires careful PCB footprint and thermal assessment. Because this device uses an established programmable-logic family, existing designs may require Xilinx or AMD ISE-compatible project files and supported programming hardware. This product record combines the manufacturer data sheet with focused engineering guidance, package information, lifecycle context, and pin-compatible alternatives. It also highlights the timing, I/O, and capacity differences that matter when replacing a CPLD without changing the PCB footprint.

RFQ צור קשר
XC9572XL-7VQG64C - 72-Macrocell 3.3V CPLD | AMD
XC9572XL-7VQG64C

XC9572XL-7VQG64C - 72-Macrocell 3.3V CPLD | AMD

The AMD XC9572XL-7VQG64C is a 72-macrocell, 3.3 V complex programmable logic device with 1,600 usable logic gates, 52 user I/O pins, and a 7.5 ns maximum propagation delay, housed in a 64-pin surface-mount TQFP package. It belongs to the XC9500XL family of in-system programmable CPLDs, combining deterministic nonvolatile logic with a simple peripheral-device architecture. A complex programmable logic device, or CPLD, is a programmable semiconductor that implements digital logic through a structured collection of macrocells and programmable interconnect. In the product hierarchy, a CPLD is a programmable logic device, a type of semiconductor and a practical alternative to small gate arrays. Its nonvolatile configuration allows the implemented logic to remain in the device after power is removed, which is useful for control, decoding, interface, and glue-logic designs. The XC9572XL provides 72 macrocells organized into four logic-element or function-block groups. This architecture supports compact state machines, bus arbitration, address decoding, protocol translation, and general-purpose control logic. The -7 speed designation corresponds to a 7.5 ns maximum propagation delay, while the device is specified at 3.3 V. In-system programmability supports configuration updates without removing the device, and the XC9500XL architecture supports a minimum of 10,000 program or erase cycles. The XC9572XL uses a flash-based, reprogrammable configuration approach rather than volatile SRAM configuration. Its macrocell-based structure provides predictable timing through fixed product-term paths and programmable interconnect. With 52 user I/O pins in the 64-pin package, the device can support substantial mixed logic and external interface requirements while remaining smaller than a large FPGA. Typical applications include industrial control and automation, legacy peripheral emulation, communication interface logic, display and video control, embedded boot and sequencing logic, and compact glue-logic subsystems. The XC9500XL family is particularly relevant to designs that need nonvolatile logic and in-system updates but do not require the resources or complexity of a larger FPGA. PCB implementation requires careful review of the manufacturer's pin descriptions, supply connections, configuration interface, and unused-pin treatment. The 64-pin package has fine-pitch leads, so trace geometry, solder-paste volume, and thermal or power distribution should be checked against the package drawing and board-fabrication capabilities. Confirm compatibility with the active design toolchain before starting a new design. This page combines the device architecture, timing and I/O characteristics with package-aware alternatives, application guidance, and practical design notes. It is intended to support engineering selection while preserving the distinction between a true pin-compatible alternative and a device that merely belongs to the same broader CPLD category.

RFQ צור קשר
XCF02SVOG20C - 2Mb Platform Flash PROM for FPGA Config | AMD/Xilinx
XCF02SVOG20C

XCF02SVOG20C - 2Mb Platform Flash PROM for FPGA Config | AMD/Xilinx

The AMD/Xilinx XCF02SVOG20C is a 2-Mbit in-system programmable configuration PROM designed to store configuration bitstreams for Xilinx FPGAs, housed in a 20-pin TSSOP package. It provides 2,097,152 bits of NOR Flash memory organized as 2,000K x 1, operates from a 3.0V to 3.6V supply, and supports the IEEE 1149.1 / IEEE 1532 JTAG standard for in-system programming and boundary-scan testing. The device delivers guaranteed endurance of 20,000 program/erase cycles and minimum data retention of 20 years, making it suitable for long-lifecycle industrial and embedded designs. A Platform Flash PROM is a non-volatile configuration memory IC purpose-built to hold FPGA bitstreams outside the FPGA fabric. In the broader component taxonomy it belongs to NOR Flash -> non-volatile memory -> memory IC -> integrated circuit. Unlike discrete SPI Flash or parallel boot memories, Platform Flash devices integrate the JTAG programming chain, FPGA hand-shake pins (CCLK, DONE, INIT, PROGRAM) and a cascade-ready architecture, so a single IC can boot a Xilinx Spartan or Virtex FPGA without external glue logic. Key features include 2Mb density in a compact 20-TSSOP footprint, low-power advanced CMOS NOR Flash process, cascadable bitstream expansion for larger FPGAs, and JTAG boundary-scan with 3-stage registers per bidirectional pin. The industrial temperature grade (VOG suffix = -40C to +85C) and lead-free TSSOP-20 packaging make XCF02SVOG20C a mainstream choice for cost-sensitive Spartan-3 / Spartan-3A designs. The OG20C suffix denotes a TSSOP-20 package supplied in tube. From a system-level perspective, XCF02SVOG20C connects directly to the FPGA's configuration mode pins (M[2:0] = 010 selects Master Serial mode). On power-up the PROM serial-clocks the bitstream via the FPGA CCLK pin, the FPGA drives DONE high, and the PROM tri-states its data line. The bidirectional pins are observable and controllable through the JTAG boundary-scan register, which speeds prototype debug and board-level interconnect testing. The NOR Flash cell array provides fast read access with low standby current. Typical applications include Spartan-3, Spartan-3A, Spartan-3E, and Virtex-II configuration storage, industrial control boards, factory automation equipment, medical imaging FPGA platforms, and any design that requires a small-footprint non-volatile boot source for Xilinx FPGAs. Two or more XCF02S PROMs can be cascaded to support larger bitstreams for higher-density FPGAs. When designing with XCF02SVOG20C, confirm the FPGA bitstream does not exceed 2Mb before committing the BOM. AMD PCN XCN20013 (2026) confirms there is NO direct drop-in replacement for XCF02SVOG20C; design teams are advised to forecast demand and place final orders before key dates in Appendix A of that PCN, or migrate the FPGA to a newer family that boots from internal SPI Flash. This page synthesizes distributor pricing, lifecycle risk context (XCN20013), drop-in alternative scarcity, and practical design notes not found in the manufacturer datasheet alone.

RFQ צור קשר
XCF04S-VO20C - 4Mb FPGA Configuration PROM, 20-TSSOP | AMD/Xilinx
XCF04S-VO20C

XCF04S-VO20C - 4Mb FPGA Configuration PROM, 20-TSSOP | AMD/Xilinx

The AMD/Xilinx XCF04S-VO20C is a 4-megabit in-system programmable Platform Flash configuration PROM designed to store configuration bitstreams for Xilinx FPGAs, packaged in a 20-pin thin shrink small outline package (TSSOP) and supplied in a tube. It operates from a 3.0 V to 3.6 V single supply, uses serial SPI-like configuration interface logic, and is rated for commercial-grade environments, making it a drop-in configuration memory solution for legacy AMD/Xilinx FPGA designs. An FPGA configuration PROM is a non-volatile flash memory device that holds the FPGA's bitstream and loads it into the FPGA's internal configuration logic at power-up. In the broader component taxonomy, the XCF04S-VO20C sits in the hierarchy: configuration memory -> PROM -> non-volatile memory -> memory IC -> semiconductor. The Platform Flash family is purpose-built for AMD/Xilinx Spartan, Virtex, and CoolRunner device chains, replacing older one-time-programmable PROMs to lower board cost and shorten programming cycles via in-system programmability through JTAG or slave-serial modes. Key features include 4 Mb of flash storage, an industrial-standard 4-pin SPI/I2C-like configuration interface, in-system programmability (ISP) via JTAG, and support for daisy-chain configuration across multiple FPGA devices or PROMs. The 20-TSSOP footprint is the same as the larger XCF08P/XCF16P family members, offering a consistent PCB layout when migrating bitstream size. Commercial temperature-grade operation and a single 3.3 V supply simplify power design versus dual-supply PROMs. From a technical standpoint, the XCF04S-VO20C is built on a NOR-flash process with an internal oscillator, command state machine, and configuration-data serializer. When the FPGA releases its DONE pin (or equivalent configuration logic), the PROM shifts out the bitstream through the dedicated data/clock pins. The flash-based design supports thousands of reprogram cycles, eliminating the need for UV-erase windows of older EPROM PROMs and reducing manufacturing rework time. The 20-TSSOP package keeps the device footprint identical to peers in the Platform Flash family. Typical applications include Spartan-3 / Spartan-6 FPGA boot-memory links, Virtex-II/Virtex-4/Virtex-5 configuration-storage companions, industrial PLCs and embedded controller boards, and legacy industrial-camera or motor-control platforms that still ship with a separate configuration PROM. It is also commonly seen in test-and-measurement prototypes where designers prefer a dedicated PROM over in-FPGA bitstream compression methods. When designing with the XCF04S-VO20C, ensure the FPGA's mode pins are set to Master Serial mode (M[2:0] = 000) so the PROM drives CCLK, and confirm the JTAG chain order in software (iMPACT, Vivado hardware manager) to avoid in-system programming conflicts. As of 2026-10-11, this part shows active distributor stock but is flagged in the AMD/Xilinx product change-notification system as approaching end of life - check PCN status before new designs. This page consolidates distributor pricing, drop-in alternatives such as XCF04SVOG20C and XCF08P family members, and PCB-layout notes not included in the manufacturer datasheet.

RFQ צור קשר
XCF04SVOG20C - 4Mb Platform Flash Configuration PROM | AMD/Xilinx
XCF04SVOG20C

XCF04SVOG20C - 4Mb Platform Flash Configuration PROM | AMD/Xilinx

The AMD/Xilinx XCF04SVOG20C is a 4-Mbit in-system programmable Platform Flash configuration PROM designed to store and load configuration bitstreams for Xilinx FPGAs such as Spartan-6, Virtex-5, and earlier Series-6/7 devices. The device integrates 4194 kbits of non-volatile flash organized as 4000k x 1 (4-Mbit density) in a 20-pin TSSOP plastic package rated for the industrial operating range. According to AMD/Xilinx product documentation, the part supports a simple serial configuration interface (slave serial mode), daisy-chained multi-device configuration, in-system programmability via JTAG (IEEE 1149.1), and built-in data decompression that lets the PROM hold up to 8 Mbits of compressed configuration data. A Platform Flash PROM is a non-volatile configuration memory IC that boots up an FPGA by clocking out its stored bitstream at power-on. The category belongs to the broader taxonomy of FPGA configuration memories -> serial flash for FPGAs -> non-volatile boot memory -> programmable logic support ICs. Unlike generic SPI flash, Platform Flash PROMs are designed with FPGA-specific control signals (CCLK, DONE, INIT, PROGRAM) and timing compatible with Xilinx slave-serial and SelectMAP-mapped configuration protocols, which simplifies board design and removes the need to bind an MCU to load the bitstream. Key features include a low-power advanced CMOS FLASH process, IEEE 1149.1 JTAG boundary-scan and in-system programming, configurable slave serial or daisy-chain configuration modes, an internal oscillator that drives the master CCLK output, design version storage for multi-bitstream systems, and a read-protect security fuse. The PROM is specified for 3.3V core and I/O operation and is rated for an operating temperature range appropriate to industrial environments. Architecturally, the XCF04SVOG20C combines a 4-Mbit flash array with a configuration controller state machine that handles FPGA handshaking. Endurance is rated by the manufacturer at thousands of program/erase cycles, and data retention is specified in years for industrial-grade operation. The single-pin-per-bit data path makes the device pin-compatible within the Platform Flash PROM family across densities of 1 Mbit, 4 Mbit, 8 Mbit, 16 Mbit, and 32 Mbit. Typical applications include Spartan-6 and Virtex-5 FPGA configuration, FPGA-based industrial controllers that boot from non-volatile memory, test-and-measurement loaders, and any Xilinx FPGA system that requires field-updatable configuration or daisy-chained multi-FPGA configuration. Designers also use Platform Flash PROMs in safety-critical systems because the PROM's configuration validity is verified by the FPGA's CRC logic at every boot. Design consideration: when migrating an XCF04S design to a newer Xilinx configuration solution, verify the master/slave mode and DONE polarity on the PCB. Also note that the XCF04SVOG20C has been transitioned out of production by AMD/Xilinx (see lifecycle status); users with long-lived programs should plan around the suggested active alternatives listed below. This page consolidates distributor pricing, lifecycle status, drop-in alternatives, and design notes for engineers migrating off the XCF04SVOG20C, with information that goes beyond the manufacturer datasheet.

RFQ צור קשר
XCF16PVO48C0973 - 16Mb FPGA Configuration PROM | AMD Xilinx
XCF16PVO48C0973

XCF16PVO48C0973 - 16Mb FPGA Configuration PROM | AMD Xilinx

The AMD Xilinx XCF16PVO48C0973 is a 16-Mbit In-System Programmable Configuration PROM designed to store and stream configuration bitstreams to Xilinx FPGA families. Housed in a 48-pin TSOP (TFSOP) package, it provides a serial configuration interface optimized for Spartan, Virtex, and CoolRunner device chains. With an operating supply range of 1.65V to 2.0V and industrial-grade -40C to +85C temperature support, the part is suitable for commercial, industrial, and ruggedized embedded systems. A configuration PROM is a non-volatile serial memory that holds the FPGA bitstream and presents it to the FPGA at power-up, after reset, or on demand through JTAG/Serial-mode commands. Compared to parallel flash, configuration PROMs deliver a smaller footprint, simpler interface timing, and proven Xilinx ecosystem compatibility - making them a reference solution for legacy and current Spartan-3, Virtex-4/5, and CoolRunner-II designs that still rely on dedicated boot storage. Key features of the XCF16PVO48C0973 include 16-Mbit (16Mx1 serial organization) density, in-system programmability through the JTAG/standard Xilinx PROM programming interface, low standby current typical of serial PROMs, and a 48-TSOP package with a 0.724 inch (18.40 mm) body width. The part supports master-serial configuration modes and provides CRC-based bitstream integrity checking during FPGA load. From an architecture perspective, the device uses a serial-NOR-style command set with opcode-driven read operations, and integrates Xilinx-specific configuration flow states (e.g., 8-bit address counters, bitstream framing) that allow the FPGA to load its image directly without an external microcontroller. This eliminates boot firmware complexity in most FPGA designs. Typical applications include Spartan-3/3E/6 FPGA boot storage, Virtex-4/5 configuration backup, industrial controller FPGA subsystems, military/aerospace rad-tolerant FPGA designs (when paired with rad-hard FPGAs), and remote field-upgradeable embedded systems that need reliable in-system re-programmability over the JTAG port. When designing with this PROM, verify the FPGA-to-PROM pin mapping against the target FPGA's Master Serial configuration mode table, ensure the 1.8V rail meets PROM inrush current during read bursts, and place a 0.1 uF + bulk capacitor pair within 5 mm of the VCC pins to maintain clean read-clock edges. This page synthesizes current distributor pricing, in-system programming guidance, and pin-compatible alternatives across the Xilinx XCF family - content not aggregated on individual distributor listings.

RFQ צור קשר
XCF16PVOG48C - 16Mb FPGA Configuration PROM | AMD Xilinx | 48-TSOP
XCF16PVOG48C

XCF16PVOG48C - 16Mb FPGA Configuration PROM | AMD Xilinx | 48-TSOP

The AMD Xilinx XCF16PVOG48C is a 16-Mbit in-system programmable configuration PROM from the Platform Flash series, supplied in a 48-pin TSOP (VOG48) package and optimized for storing Xilinx FPGA configuration bit streams at 1.8V VCCINT. According to AMD/Xilinx documentation, this serial flash device is engineered for high-density FPGA bitstream storage with JTAG-based in-system programming and supports industrial temperature operation from -40C to +85C. As part of the XCFxxP family, it pairs directly with 1.8V-core Spartan-3AN, Virtex-5, and other contemporary Xilinx FPGA families for master-serial or slave-serial boot. An FPGA configuration PROM is a non-volatile memory that holds the FPGA's bitstream image so the device can self-config at power-up without an external microcontroller. The Platform Flash family sits in the hierarchy: PROM -> non-volatile memory -> configuration storage -> FPGA boot subsystem. Modern AMD/Xilinx FPGAs often embed multi-Mbit configuration storage directly on silicon, but external Platform Flash PROMs remain widely used for multi-boot images, remote field updates, and security applications where bitstream confidentiality is enforced outside the FPGA die. Key features include 16-Mbit density (twice the capacity of the XCF08P), 48-TSOP surface-mount package (0.724 inch / 18.40 mm body width), 1.65V to 2V VCCINT supply (1.8V nominal), industrial -40C to +85C operating range, JTAG IEEE 1149.1 boundary-scan and in-system programmability, and a serial configuration interface compatible with the Xilinx FPGA serial configuration bus (CCLK, DIN, DOUT, INIT, DONE). These traits allow the XCF16PVOG48C to replace the XCF08PVOG48C directly while doubling bitstream capacity for larger FPGA families or compressed bitstream storage. The device uses a serial NOR-style architecture with command-driven read/write/erase operations, organized as 16-Mbit of main memory plus a small status register for programming state. Programming and erase are managed by an internal state machine triggered over JTAG; verification uses the standard Xilinx iMPACT/iCE tools. The architecture deliberately keeps the serial interface simple so the FPGA's existing configuration controller can stream the bitstream without glue logic. Typical applications include Spartan-3AN FPGA configuration, Virtex-5 LX/SX/TX configuration, multi-boot FPGA designs, industrial control systems requiring remote in-field firmware updates, secure bitstream storage for defense and aerospace designs, and prototyping platforms where the configuration source must be field-reprogrammable without removing the FPGA from the board. When designing with this device, ensure the JTAG chain includes the PROM between TDI and TDO and that the FPGA's mode pins (M0/M1/M2) select the correct serial configuration mode. The 1.8V VCCINT must be supplied before the FPGA begins configuration; sequence accordingly to avoid partial bitstream corruption. This page synthesizes distributor pricing, drop-in Platform Flash alternatives, and design notes on JTAG chain ordering not found in a single manufacturer document.

RFQ צור קשר
XCF32PVOG48C - 32Mb FPGA Config PROM 1.8V 48-TSOP | AMD
XCF32PVOG48C

XCF32PVOG48C - 32Mb FPGA Config PROM 1.8V 48-TSOP | AMD

The AMD XCF32PVOG48C is a 32-Megabit in-system programmable configuration PROM for Xilinx FPGAs, supplied in a 48-pin TSOP package and operating from a 1.65 V to 2.0 V VCC supply. It is part of the Platform Flash PROM family and stores large FPGA configuration bitstreams that are loaded into Xilinx/AMD FPGAs at power-up. The XCF32PVOG48C variant specifically uses the 1.8 V Platform Flash XL family and is offered in a commercial operating temperature grade. A Platform Flash configuration PROM is a non-volatile NOR Flash memory device whose primary role is to hold the FPGA bitstream and present it to the target FPGA over a serial or parallel configuration interface. In the broader memory hierarchy it sits under EEPROM and Flash PROM, and above raw NOR Flash, providing a pre-validated, FPGA-aware configuration storage medium. It relieves the system designer of placing a separate boot Flash on the board and is typically the first device in the FPGA configuration chain. Key electrical features include a 32 Mbit (4 Mbyte) organized as 1-bit-wide serial/parallel PROM, a 1.65 V to 2.0 V operating voltage range with 3.3 V tolerant I/O pins, low-power advanced CMOS Flash technology, an in-system programmable JTAG/IEEE 1149.1 interface, and cascade support for storing larger bitstreams. The 48-pin TSOP provides a compact, surface-mount footprint compatible with standard PCB assembly lines. Architecturally, the device uses a NOR Flash core tied to a serial/parallel configuration controller, with dedicated CCLK, DIN/DOUT, and CF pins mapping directly to the FPGA configuration port. The 1.8 V internal core reduces power consumption versus 3.3 V PROMs, which is meaningful when the PROM is continuously powered alongside the FPGA. Typical applications include Xilinx Virtex and Spartan FPGA configuration boot storage, industrial control boards, communications infrastructure, and test/measurement platforms that require reliable field-upgradable bitstream storage. For military and aerospace designs, AMD also offers the XQF32PVOG48M variant in the same family. When designing with this part, ensure that the FPGA configuration mode (serial vs. parallel) and density match the bitstream size, and verify that the JTAG chain supports ISP programming of the PROM.

RFQ צור קשר
XCKU025-1FFVA1156C 312-I/O Kintex UltraScale FPGA | AMD
XCKU025-1FFVA1156C

XCKU025-1FFVA1156C 312-I/O Kintex UltraScale FPGA | AMD

The AMD Xilinx XCKU025-1FFVA1156C is a Kintex UltraScale field-programmable gate array with 312 I/O, 318,150 programmable logic cells, and a 1156-pin FCBGA package. It uses 20 nm fabrication technology, operates from a 0.95 V core supply, and combines monolithic and advanced stacked silicon interconnect technology for high-density programmable logic designs. A field-programmable gate array is a semiconductor whose internal digital logic, interconnects, and I/O blocks are configured after manufacture. Within the FPGA product hierarchy, the XCKU025 belongs to the Kintex UltraScale family, combining programmable logic, block RAM, digital signal processing resources, high-speed serial transceivers, and parallel I/O in one device. This integration supports designs requiring substantial parallel processing and flexible interface adaptation without fixed application-specific wiring. The XCKU025-1FFVA1156C provides 312 I/O in a 1156-contact FCBGA package. Its device code indicates a -1 speed grade, and the C suffix identifies the commercial temperature grade. Kintex UltraScale architecture supports a high DSP and block-RAM-to-logic ratio, while next-generation transceivers make the device suitable for high-bandwidth data links, test equipment, industrial control, communications infrastructure, and embedded processing systems. The monolithic and advanced stacked silicon interconnect implementation is a central architectural feature. It permits complex devices to combine programmable silicon resources while supporting high-speed internal data movement. The 20 nm process and 0.95 V core supply provide the process and voltage context for the Kintex UltraScale architecture, while the large FCBGA package accommodates the extensive I/O and power-delivery requirements of the device. Typical applications include high-speed data acquisition, programmable signal processing, network interface equipment, industrial automation, scientific instrumentation, and embedded control systems. The 312-I/O count is valuable when a design must combine multiple parallel buses, high-speed serial links, memory interfaces, clocks, and control signals in a single FPGA. The large logic-cell and DSP-oriented architecture also suits parallel algorithms and high-throughput data paths. PCB design should follow AMD's package pinout files and the relevant UltraScale design guidance. Because the package has 1156 contacts, power and ground distribution require careful plane construction, and high-speed serial and memory routing needs controlled impedance and continuous reference planes. Configuration, decoupling, thermal management, and signal-integrity verification should be completed before the layout is released for fabrication. This page combines the verified device identity, package information, procurement references, practical replacement analysis, and engineering design guidance. It also distinguishes speed-, temperature-, and low-power-grade alternatives so designers can identify the appropriate device without confusing a package-compatible option with an unqualified functional substitute.

RFQ צור קשר
XCKU025-1FFVA1156I - 20nm Kintex UltraScale FPGA | AMD
XCKU025-1FFVA1156I

XCKU025-1FFVA1156I - 20nm Kintex UltraScale FPGA | AMD

The AMD XCKU025-1FFVA1156I is a Kintex UltraScale field-programmable gate array built on 20 nm FPGA technology, with 318,150 logic cells, 312 I/O pins, and a 0.922 V minimum supply voltage in an FCBGA-1156 package. The -1 speed grade supports general-purpose, industrial, communications, defense, test, and signal-processing designs, while the industrial-temperature suffix denotes operation from -40°C to 100°C. An FPGA is a programmable digital integrated circuit whose logic fabric, programmable input/output blocks, block RAM, DSP slices, transceivers, and clocking resources can be configured after manufacture. Within the semiconductor hierarchy, an FPGA belongs to the programmable-logic family, sits above fixed-function programmable logic devices, and provides a higher level of integration than discrete glue logic or application-specific standard ICs. This device gives engineers parallel hardware capability for parallel data acquisition, protocol handling, DSP, control logic, and high-speed interface aggregation. The XCKU025 combines 318,150 logic cells with 312 user I/O in a 1.0 mm-ball-pitch FCBGA-1156 package. The device carries a 20 nm process designation and a 0.922 V minimum supply requirement. Its 312 I/O are suitable for parallel buses, sensor interfaces, memory interfaces, and custom high-speed logic, while the Kintex UltraScale architecture can implement pipelines, filters, transforms, and control functions in hardware. The large 1156-ball package exposes substantially more device I/O and power-distribution connections than a smaller FPGA. It therefore requires a carefully engineered PCB with dense escape routing, controlled-impedance traces, multiple power rails, thorough decoupling, and thermal analysis. Package height is listed as 3.42 mm, and the industrial operating range is -40°C to 100°C. These package and environmental characteristics make board-level signal integrity and power planning as important as the RTL design itself. Typical uses include high-speed data acquisition, radar and signal processing, wireless communication equipment, video image processing, industrial control, instrumentation, and digital signal processing accelerators. The device is particularly appropriate when deterministic parallel throughput is more valuable than minimizing board area or power. Designs using very high logic-cell counts should confirm utilization, timing closure, tool licensing, memory bandwidth, and power budget before layout release. A key practical consideration is that the 1156-ball footprint is not a simple drop-in land pattern for a smaller FPGA. Existing designs must follow the AMD package pinout files and UG575 package guidance when assigning balls, power planes, and PCB escape paths. This page consolidates the core device specifications, package characteristics, comparison information, and engineering guidance needed for initial feasibility and board-planning work.

RFQ צור קשר
XCKU025-2FFVA1156E - 318K Logic Cell FPGA | AMD
XCKU025-2FFVA1156E

XCKU025-2FFVA1156E - 318K Logic Cell FPGA | AMD

AMD XCKU025-2FFVA1156E is a Kintex UltraScale field-programmable gate array with 318,150 logic cells, 18,180 configurable logic blocks, 312 input/outputs, and a nominal 0.95 V core voltage. It is packaged in a 1156-ball FCBGA package for high-performance programmable logic, digital signal processing, and high-speed connectivity designs. The -2 speed grade, industrial temperature option, and extended-grade marking distinguish this configuration. A field-programmable gate array is a semiconductor whose digital logic is configured after manufacture. FPGA devices sit within the broader programmable-logic hierarchy, combining configurable logic blocks, fixed or semi-hard DSP resources, block RAM, input/output resources, clocking, and programmable interconnect. Their advantage over fixed logic is rapid design iteration and adaptation, while their disadvantage compared with application-specific ASICs is generally higher unit cost and lower power efficiency. The XCKU025 device provides 318,150 logic cells organized into 18,180 CLBs, creating substantial parallelism for control logic, protocol bridging, data acquisition, and high-throughput digital processing. Its 312 I/O resources support interfaces to external memory, clocks, serial transceivers, and board-level peripherals. The device also uses monolithic and advanced stacked-silicon interconnect technology, connecting an unusually large programmable fabric with dedicated resources and next-generation transceivers. The 0.95 V nominal core voltage identifies this as a high-performance FPGA platform intended for demanding signal-processing and connectivity applications. Available architecture features should be assigned through the Vivado Design Suite, which provides device-aware synthesis, implementation, timing analysis, and programming support. Designers must also use the AMD UltraScale package-device pinout files when assigning balls and PCB constraints for the 1156-ball FCBGA footprint. Typical uses include high-speed data acquisition, industrial control, test and measurement, networking, embedded vision, signal processing, and communications infrastructure. In each case, the large logic-cell count supports parallel algorithms, while the 312 available I/Os and high-speed transceivers provide connectivity between the FPGA fabric, memory, and external interfaces. The 1156-ball package demands careful power delivery, decoupling, thermal planning, and high-density PCB layout execution. A critical design consideration is that the speed grade, temperature grade, package suffix, and device marking must all match the intended production environment. Programming files and bitstream compatibility must be checked against the exact device identifier before manufacturing. Because this is a large BGA device, assembly yield, via-in-pad construction, solder-paste control, and X-ray inspection quality can materially affect production cost. This page combines the exact device identity, pinout-resource location, package information, engineering selection criteria, and same-footprint replacement guidance. It also distinguishes direct configuration alternatives from broader FPGA options, helping engineers evaluate performance grade, temperature range, lifecycle requirements, and board compatibility before requesting a quotation.

RFQ צור קשר
XCKU025-2FFVA1156I - Kintex UltraScale FPGA | AMD
XCKU025-2FFVA1156I

XCKU025-2FFVA1156I - Kintex UltraScale FPGA | AMD

AMD XCKU025-2FFVA1156I is a Kintex UltraScale field-programmable gate array with 312 I/O, 318,150 programmable logic cells, 13,004,800 registers, and 20 nm process technology in a 1156-BBGA FCBGA package. The -2 suffix identifies its performance grade, while the I suffix identifies the industrial temperature option. This combination makes the FPGA appropriate for communications, industrial control, test equipment, embedded processing, and high-speed digital systems requiring substantial parallel logic and I/O density. A field-programmable gate array is a programmable digital integrated circuit whose logic, signal routing, and embedded resources can be configured after manufacture. The Kintex UltraScale family combines programmable logic with high-speed serial transceivers, block RAM, DSP resources, and dedicated I/O resources. Within the system hierarchy, an FPGA is a semiconductor and programmable logic device, while this particular device belongs to the Kintex UltraScale product family and the AMD/Xilinx high-performance FPGA portfolio. The principal benefits of XCKU025-2FFVA1156I are its 318,150 logic cells, 312 I/O, and large register count. These resources support parallel data pipelines, protocol bridging, real-time signal processing, hardware acceleration, and control logic requiring deterministic programmable behavior. The 1156-contact FCBGA also provides substantial interconnect capacity, although its fine pitch, high pin count, and large thermal requirements make careful PCB layout essential. The 20 nm Kintex UltraScale architecture is designed for high-performance programmable systems operating from relatively high clock frequencies. Designers should use AMD Vivado Design Suite and the applicable UltraScale architecture documentation for device configuration, timing constraints, pin planning, and bitstream generation. Configuration storage, programming interfaces, clocking, power sequencing, and I/O standards must all be planned before schematic capture because mistakes in a 1156-BBGA design can be expensive to correct. Typical applications include high-speed network equipment, industrial automation, semiconductor test systems, radar and signal-processing equipment, high-resolution imaging, and embedded control platforms. The 312 I/O support extensive board-level connectivity, while the programmable logic and DSP resources allow multiple functions to be consolidated into one device. Compared with a discrete processor-plus-support-chip design, an FPGA can provide parallel throughput, configurable interfaces, and low-latency hardware processing. A critical layout consideration is the 1156-BBGA footprint. Follow the AMD package pinout files, preserve the recommended ball-grid escape geometry, route power and ground planes with low impedance, and provide thermal vias beneath the device. Validate power sequencing, configuration startup, decoupling, and the complete high-speed escape path with the finished stack-up before manufacturing. This page combines the exact catalog identity, package information, temperature and speed-grade options, drop-in migration candidates, application guidance, and practical design notes needed to plan a Kintex UltraScale PCB around XCKU025-2FFVA1156I.

RFQ צור קשר
XCKU035-1FBVA676C Kintex UltraScale FPGA 444K Cells | AMD
XCKU035-1FBVA676C

XCKU035-1FBVA676C Kintex UltraScale FPGA 444K Cells | AMD

The AMD Xilinx XCKU035-1FBVA676C is a Kintex UltraScale Field Programmable Gate Array built on TSMC's 20nm process, integrating 444,343 logic cells and 19,456,000 system gates in a 676-ball FCBGA package (27 mm × 27 mm) with 312 user I/Os. It runs a -1 speed grade targeting up to 630 MHz fabric performance, with 12.5 Gb/s capable transceivers (GTH) on select Kintex UltraScale SKUs and 240 DSP48E2 slices optimized for high-throughput fixed- and floating-point arithmetic. The commercial temperature grade (suffix C) supports 0 °C to +85 °C operation with a 0.95 V core voltage. What is an FPGA? A Field Programmable Gate Array (FPGA) is a programmable logic device that lets designers implement custom digital circuits after PCB fabrication by configuring an array of configurable logic blocks (CLBs), dedicated DSP slices, block RAM, and high-speed serial transceivers. Within the broader semiconductor hierarchy, an FPGA sits between general-purpose CPUs/GPUs (fixed instruction set, software-defined) and ASICs (fixed hardware). AMD's Kintex UltraScale family occupies the mid-range position in the UltraScale portfolio, sitting below Virtex UltraScale (highest logic density and bandwidth) and above Artix UltraScale (lowest cost and power). All Xilinx boards shift the value curve toward best-in-class price/performance/watt at 20nm. Key features of the XCKU035-1FBVA676C include up to 1,250 Mbps of DDR4 external memory interface support, integrated PCIe Gen3 hard cores, 4.7 Mb of distributed RAM, 240 DSP slices, and 16 GT transceivers on -1 speed grade parts in the larger Kintex UltraScale family. The device provides 312 high-performance SelectIO pins supporting multiple I/O standards including LVDS, HSTL, SSTL, and differential memory interfaces. The device also exposes 3 MMCM and 8 PLL mixed-mode clock managers for high-frequency clock synthesis and skew management. Architecturally, the Kintex UltraScale device uses UltraScale architecture enhancements over 7-series FPGAs - including new routing interconnect, more efficient clock networks, and improved block RAM and DSP resources. The 20nm planar CMOS process allows higher integration while keeping leakage power low, and the GT(GTH) transceivers support 12.5 Gb/s line rates for backplane and chip-to-chip serial interconnect. The XCKU035-1FBVA676C serves wireless baseband processing, software defined radio, high-definition video processing pipelines, high-speed serial backplane bridging, and PCIe accelerator card designs in the 100K–500K logic-cell density class. When laying out a board with this BGA, allocate 12 power rails (VCCINT, VCCAUX, VCCO, MGTAVCC, MGTAVTT, VBATT, MGTVCCAUX, VCCADC, VCCBRAM, VCCO_HP, VCCAUX_IO, plus GT helper rails) and follow the package-specific K7-PCB decaps guidance in UG583 to control simultaneous switching noise and SSN.

USD $467.66 במלאי