מוצרים (46,000+)

XCKU035-1FBVA676I - 444343-Cell Kintex UltraScale FPGA | AMD
XCKU035-1FBVA676I

XCKU035-1FBVA676I - 444343-Cell Kintex UltraScale FPGA | AMD

The AMD XCKU035-1FBVA676I is a Kintex UltraScale field-programmable gate array with 444,343 logic cells, 312 I/O, and 16 GTH transceivers, packaged in a 676-pin FCBGA. The device is built on 20 nm technology and uses a 0.95 V core supply, providing programmable logic, block RAM, DSP, and high-speed serial connectivity for demanding embedded systems. An FPGA is a semiconductor whose digital functionality is defined after manufacture through a configuration bitstream. The Kintex UltraScale family belongs to the broader programmable-logic hierarchy: FPGA, programmable-logic device, digital semiconductor, and integrated circuit. This architecture combines parallel programmable logic with dedicated DSP slices, block RAM, high-speed I/O, clocking resources, and serial transceivers, allowing one device to implement control, signal processing, connectivity, and hardware acceleration functions. The XCKU035-1FBVA676I provides 1,700 DSP slices and 19,456 Kbits of block RAM alongside 444,343 logic cells. Its 312 user I/O support connections to external memory, data converters, network transceivers, and industrial peripherals. Sixteen GTH transceivers enable high-speed serial links, while the -1 speed designation identifies the device's performance grade within the Kintex UltraScale ordering system. The 20 nm Kintex UltraScale implementation combines programmable logic fabric with dedicated arithmetic, memory, and transceiver resources. Its 676-pin FCBGA package provides a large, complex interconnect arrangement for power, ground, high-speed I/O, configuration, and general-purpose signals. Proper implementation therefore depends on the AMD package pinout, board power planning, decoupling, and high-speed layout guidance rather than generic BGA assumptions. Typical applications include industrial automation, test and measurement, networking equipment, high-speed data acquisition, signal processing, embedded vision, and communications infrastructure. The combination of 1,700 DSP slices and 16 GTH transceivers makes the device particularly suitable when parallel processing and multi-gigabit serial communication must coexist in one FPGA package. A key design consideration is power delivery. This high-pin-count FCBGA requires a dense multilayer PCB, numerous decoupling capacitors, carefully controlled power sequencing, and thermal analysis for the configured Kintex UltraScale device. Differential and high-speed routes also need compliant impedance-controlled stackups and return-path planning to prevent signal-integrity degradation. This page consolidates device specifications, package information, same-footprint alternatives, application guidance, and engineering design notes into an implementation-oriented resource for engineers evaluating the XCKU035-1FBVA676I.

RFQ צור קשר
XCKU035-1FBVA900C - Kintex UltraScale FPGA | AMD
XCKU035-1FBVA900C

XCKU035-1FBVA900C - Kintex UltraScale FPGA | AMD

The AMD XCKU035-1FBVA900C is a Kintex UltraScale field-programmable gate array with 355,474 logic cells, 468 I/Os, and a 900-ball flip-chip BGA package. It operates from a nominal 0.95 V core supply, with a stated core-voltage range of 0.922 V to 0.979 V, and is built on a 20 nm process. The device is packaged as a 900-BBGA, FCBGA and targets industrial communications, high-speed processing, embedded vision, and infrastructure equipment requiring substantial parallel programmable logic. An FPGA is a reconfigurable semiconductor in the broader category of programmable logic devices. Unlike a fixed-function ASIC, an FPGA combines configurable logic blocks, programmable I/O, memory resources, clocking, and dedicated signal-processing or serial-transceiver blocks. The Kintex UltraScale family sits above AMD’s lower-density FPGA families in logic capacity and I/O resources, making it suitable for systems that must consolidate multiple fixed functions onto one board while retaining design flexibility. The XCKU035-1FBVA900C provides 468 I/Os, a 900-terminal package, and 355,474 logic cells. Its 0.922 V to 0.979 V core-voltage range leaves relatively little margin around the nominal 0.95 V operating point, so power delivery must account for transient behavior and package-level supply requirements. The commercial-grade ordering code is associated with a 0 °C to 85 °C operating-temperature range. Detailed resource counts, pin functions, configuration requirements, and power characteristics should be confirmed against the AMD Kintex UltraScale data sheet and package pinout files before schematic release. Kintex UltraScale devices combine programmable logic with dedicated resources for high-speed serial connectivity, memory-intensive data processing, and clock management. That architecture allows designers to implement parallel datapaths, protocol bridges, network packet processing, embedded control, and accelerator functions in one device. The 900-ball package provides a large I/O and power-delivery interface, but its fine pitch and high ball count make clean PCB layout, plane construction, via planning, and assembly process control essential. Typical uses include high-throughput network equipment, industrial control and test systems, video-processing infrastructure, telecommunications equipment, and embedded accelerators. The large pin count also makes the device suitable for designs requiring numerous high-speed interfaces, substantial external memory connectivity, or multiple voltage domains. Software tools, bitstreams, board support, and the selected transceiver or memory interfaces must be validated for the exact device suffix before production deployment. The primary engineering constraint is power integrity at the 0.95 V core rail. Designers should follow the AMD recommended decoupling, package-ball, and PCB-layer guidance, provide stable power across temperature, and validate signal integrity on every high-speed interface. Configuration pins, clock inputs, resets, and dedicated transceiver pins must be assigned according to the official package pinout rather than inferred from another 900-ball device. This product record combines the exact ordering information, package identity, core electrical conditions, resource headline, and current sourcing links with engineering guidance for power, layout, thermal, and lifecycle decisions. It also distinguishes true same-footprint family alternatives from differently packaged Kintex options so engineers can assess replacement feasibility without confusing package compatibility with functional similarity.

RFQ צור קשר
XCKU035-1FBVA900I - Kintex UltraScale FPGA | AMD Xilinx
XCKU035-1FBVA900I

XCKU035-1FBVA900I - Kintex UltraScale FPGA | AMD Xilinx

The AMD Xilinx XCKU035-1FBVA900I is a Kintex UltraScale field-programmable gate array with 468 I/O sites, 444343 logic cells, and a 0.922 V to 0.979 V supply-voltage range, packaged in a 900-pin FCBGA. This industrial-temperature device combines programmable logic, block RAM, DSP resources, and high-speed serial transceivers in a single 20 nm FPGA package. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic is configured after manufacture. The Kintex UltraScale family belongs to the broader hierarchy of FPGA and CPLD devices, programmable-logic semiconductors, and integrated circuits. Instead of implementing a fixed digital function in application-specific silicon, an FPGA combines configurable logic, routing, memory, hard processors, dedicated arithmetic blocks, and I/O resources to accelerate parallel processing, networking, signal processing, and control tasks. The XCKU035-1FBVA900I provides 468 I/O and 444343 logic cells in a compact 31 mm by 31 mm 900-pin FCBGA. Its nominal core supply range of 0.922 V to 0.979 V supports modern high-performance FPGA power architectures, while the extensive I/O count allows simultaneous external interfaces. The -1 ordering code identifies the device performance grade, FBVA900 identifies the package family and pin count, and the final I identifies the industrial temperature option. Exact clock, block-RAM, DSP, transceiver, and power specifications should be taken from the appropriate AMD product-table and datasheet sections. The large logic-cell count permits multiple parallel datapaths to be implemented in one device, reducing the need for discrete glue logic and supporting designs with multiple interfaces. Dedicated serial transceivers are central to the Kintex UltraScale architecture and support high-speed serial links when their operating conditions and pin constraints are satisfied. Because the FPGA uses thousands of configurable elements and a large ball-grid-array package, its power, decoupling, thermal, and routing implementation must be designed with the relevant reference design rather than treated like a small digital IC. Typical applications include high-throughput networking equipment, industrial control and automation, test-and-measurement systems, embedded vision, aerospace and defense platforms, and high-bandwidth signal-processing equipment. The 468 available I/O sites are especially useful when a design must connect multiple buses, memory devices, clocks, transceivers, and control signals. A smaller FPGA may be sufficient for modest control logic, while a larger device or multiple FPGAs may be required when a design exceeds the available logic, memory, DSP, or transceiver resources. Power delivery is a primary layout consideration for this 900-pin FCBGA. Place the required power and ground connections directly beneath or as close as practical to their assigned balls, follow the AMD package and board-design guidance, and preserve the specified return-path geometry. A complete pin assignment must be checked against the UltraScale package pinout file before assigning any FPGA bank, differential pair, clock, or transceiver signal. This page combines exact orderable-part identification, package and interface facts, qualified same-family drop-in choices, and design guidance for evaluating the XCKU035-1FBVA900I in industrial FPGA systems.

RFQ צור קשר
XCKU035-1FFVA1156C - Kintex UltraScale FPGA | AMD
XCKU035-1FFVA1156C

XCKU035-1FFVA1156C - Kintex UltraScale FPGA | AMD

AMD XCKU035-1FFVA1156C is a Kintex UltraScale field-programmable gate array with 355,474 logic cells, 520 I/O, and a 1156-ball FCBGA package. The device uses 20 nm process technology, operates from a 0.95 V core supply, and combines programmable logic with high-speed serial connectivity and substantial on-chip memory. Its FFVA1156 package provides the pin and ball assignment required by complex Kintex UltraScale designs. A field-programmable gate array is a semiconductor device whose digital logic, interconnect, memory resources, and I/O behavior are configured after manufacture. Within the product hierarchy, an FPGA is a programmable-logic IC and a category of semiconductor. Kintex UltraScale devices are positioned between lower-density programmable logic and larger systems that require substantial parallel processing, high-speed transceivers, and flexible I/O allocation. The XCKU035-1FFVA1156C provides 355,474 logic cells, 520 I/O, and 0.95 V core operation in the 1156-FC-BGA package. The commercial C ordering suffix distinguishes this version from the industrial I suffix and the different -2 performance grade. The large 1156-ball footprint supports the wide interface and power-delivery requirements associated with a Kintex UltraScale device, although the complete electrical and pin-assignment details must be taken from the AMD package documentation. Its 520 I/O make the device suitable for systems combining parallel interfaces, high-speed serial links, memory interfaces, clocks, and programmable control logic. The 35-by-35-millimeter package size is substantial compared with small FPGAs, but it accommodates the large number of dedicated balls required for power, configuration, signal, and high-speed transceiver connections. Its 20 nm process generation distinguishes it from earlier 28 nm Kintex devices. Typical applications include telecommunications and test equipment, industrial automation, high-speed data acquisition, video infrastructure, radar processing, and embedded computing systems. In each case, programmable fabric supports evolving algorithms, parallel processing, and configurable interfaces. The FCBGA package requires a dense multilayer PCB with controlled power integrity, thermal management, and careful escape routing. A critical design task is matching the FPGA, memory, transceivers, clocks, and power rails to the specific -1 speed grade and C temperature grade. Use the AMD pinout and package files when assigning every BGA ball, and validate the power tree against the device's estimated power and thermal constraints. PCB redesign is required when changing the device family, package, or ball assignment. This page combines the exact XCKU035-1FFVA1156C identifiers with package-aware replacement guidance, comparison data, application engineering guidance, and practical design notes for engineers planning a Kintex UltraScale board or determining whether the device can remain on an existing PCB.

RFQ צור קשר
XCKU035-1FFVA1156I - Kintex UltraScale FPGA, 444K Cells, FCBGA-1156 | AMD
XCKU035-1FFVA1156I

XCKU035-1FFVA1156I - Kintex UltraScale FPGA, 444K Cells, FCBGA-1156 | AMD

The AMD (formerly Xilinx) XCKU035-1FFVA1156I is a Kintex UltraScale field programmable gate array built on a 20 nm process and packaged in a 1156-ball FCBGA (35 mm x 35 mm) with 520 user I/O, delivering about 444,343 programmable logic cells and a 0.95 V core supply. A field programmable gate array (FPGA) is a reconfigurable digital integrated circuit whose logic, memory and I/O resources are defined by a bitstream loaded at power-up. Within the semiconductor hierarchy an FPGA sits above fixed-function logic and below the SoC class of devices: it occupies the FPGA and CPLD tier of programmable logic, offering the highest parallelism of any programmable silicon while remaining programmable at the field level. A Kintex UltraScale device adds hard 100G Ethernet, PCIe Gen3, DDR4 memory interfaces, high-speed transceivers and DSP blocks to the programmable fabric, so a single device can consolidate what previously required an FPGA plus several discrete companions. Key differentiators of this -1 speed grade part include the 520 I/O count, which allows dense board-level connectivity without a companion ASIC, and the FFVA1156 fine-pitch ball grid array, whose 1 mm pitch keeps a 35 mm square footprint while exposing 1156 balls for power, configuration and high-speed pairs. The -1 speed suffix denotes the industrial temperature grade performance point, and the trailing I marks the industrial temperature variant, making this part suitable for industrial, telecommunications and aerospace-adjacent equipment where -40 C to 100 C operation is required. Technically the device combines a 20 nm logic fabric with dedicated hard blocks: DSP slices for fixed- and floating-point filtering, block RAM for on-chip buffering, and multi-gigabit transceivers with programmable equalization for serial links. Because UltraScale uses a 16-bit register architecture with dedicated carry chains, pipelined DSP chains and 4.6 Gb/s or faster transceiver rates depend on the exact -1 grade and fabric speed grade; consult the AMD product table for the definitive per-pin and per-block performance figures before committing to a timing budget. Typical deployments include 4G/5G and 5G baseband radio equipment, high-speed data acquisition, industrial vision and machine-vision inspection, test and measurement instrumentation, video encoding and decoding, and secure network appliances that need hardware root of trust and encryption engines. The principal design consideration is power and thermal management: a device of this density can draw well over 20 W at -1 speed grade with all transceivers active, so the board needs a solid multi-layer ground plane, a dense power-distribution network, and copper pours under the BGA that act as the heat spreader. Decoupling must follow the AMD published power distribution network guidance closely, since transient current on the 0.95 V core rail is the primary cause of unexpected jitter in high-speed interfaces. This page consolidates distributor availability, pin-compatible and drop-in migration options in the same FFVA1156 footprint, and practical layout guidance so engineers can evaluate the XCKU035-1FFVA1156I against lower-density Kintex and mid-density UltraScale+ devices without relying on the manufacturer datasheet alone.

RFQ צור קשר
XCKU035-1SFVA784C - 444K Logic Cell Kintex UltraScale | AMD
XCKU035-1SFVA784C

XCKU035-1SFVA784C - 444K Logic Cell Kintex UltraScale | AMD

The AMD XCKU035-1SFVA784C is a Kintex UltraScale field-programmable gate array with 444,343 logic cells, 25,391 configurable logic blocks, 468 I/O, a 0.95 V nominal operating voltage, and a 784-terminal FCBGA package. It combines programmable logic, fixed resources, high-speed I/O, and programmable logic in one low-power semiconductor package. A field-programmable gate array, or FPGA, is a digital semiconductor whose logic, interconnects, and I/O can be configured after manufacture. FPGAs sit within the broader hierarchy of programmable-logic devices, semiconductors, and digital integrated circuits. Unlike a fixed-function application-specific integrated circuit, an FPGA allows designers to implement parallel processing, interface conversion, protocol handling, and control logic in configurable hardware. The XCKU035-1SFVA784C provides 444,343 logic cells organized into 25,391 CLBs and exposes 468 I/O. Its 784-terminal fine-pitch FCBGA package uses a 0.8 mm terminal pitch. The -1 ordering code identifies the -1 speed grade, while the final C suffix identifies the C temperature-grade variant. The complete operating-temperature limits, core voltage tolerances, and supported I/O standards must be confirmed in the device documentation before design release. The large logic-cell count makes this device suitable for designs that require substantial parallelism rather than a small serial state machine. Dedicated block resources can support high-speed serial links, memory-intensive data paths, and interface-rich systems. Because an FPGA design depends on the selected architecture, speed grade, temperature grade, and package, engineers should review the pinout, power estimates, configuration requirements, and device constraints together rather than treating the device as a conventional fixed-function IC. Typical applications include industrial control, test and measurement, high-speed data acquisition, networking infrastructure, embedded vision, and communications equipment. In each case, the 444,343 logic cells permit multiple parallel processing channels, while 468 I/O provide substantial board-level connectivity. System-level performance still depends on memory interfaces, clocking, configuration memory, power delivery, and the FPGA design implemented in the tools for the Kintex UltraScale family. PCB implementation must account for the 784 balls and 0.8 mm pitch. Use the manufacturer's package drawing and pinout tables to assign power, ground, configuration, clock, and user I/O balls. Validate the power rails against the selected design's utilization and activity factor, and use the manufacturer-specified decoupling and power-delivery topology to limit simultaneous-switching noise. This product page combines the exact device attributes, price evidence, package considerations, same-footprint alternatives, and engineering guidance needed to evaluate the XCKU035-1SFVA784C. It is intended to support early architecture selection, BOM review, schematic capture, PCB planning, and qualification before the complete design is released.

RFQ צור קשר
XCKU035-1SFVA784I - 784-BFBGA Kintex UltraScale FPGA | AMD
XCKU035-1SFVA784I

XCKU035-1SFVA784I - 784-BFBGA Kintex UltraScale FPGA | AMD

The AMD Xilinx XCKU035-1SFVA784I is a Kintex UltraScale field-programmable gate array with 444343 programmable logic cells, 468 user I/O, and a 784-ball flip-chip BGA package. It is manufactured on a 20 nm process and uses a 0.95 V core supply. The -1 suffix identifies the standard -1 speed grade, while the SFVA784 designation identifies the 784-ball FCCSP package and the I suffix identifies the industrial-temperature option. A field-programmable gate array is a programmable-logic device in which configurable logic blocks, programmable I/O, embedded memory, DSP resources, and dedicated clocking resources are combined on one integrated circuit. FPGA technology sits between fixed-function ASICs and software-programmable processors. Unlike an ASIC, an FPGA allows logic, interfaces, and parallel processing pipelines to be modified after manufacture, while an FPGA delivers deterministic hardware-level performance without the sequential instruction overhead of a software CPU. Key device characteristics include 444343 logic cells, 468 user I/O, a 784-BFBGA package, 20 nm process technology, and a 0.95 V core operating voltage. These resources suit designs requiring extensive parallel processing, high pin count, programmable serial links, high-speed memory interfaces, and multi-gigabit data movement. The large ball count supports dense board escape routing and direct access to power, ground, configuration, clock, and user I/O resources. The Kintex UltraScale architecture combines programmable logic with dedicated hardware for DSP, memory, and serial connectivity. Its -1 speed grade is intended for standard industrial performance rather than the faster -2 or -3 grades. Because the XCKU035-1SFVA784I uses the same 784-ball package family as closely related Kintex UltraScale devices, board-level migration can be evaluated through AMD package and pinout resources rather than redesigning the footprint from scratch. Typical applications include industrial imaging, machine vision, video processing, network infrastructure, high-speed data acquisition, software-defined radio, test and measurement, and embedded accelerator cards. In these systems, parallel lanes and DSP blocks can process pixels, samples, or protocol packets concurrently, while programmable I/O adapts the board to external converters, transceivers, and memory components. Design work should begin with the AMD package pinout files and the device-specific pin description in the manufacturer documentation. Validate every power rail, decoupling strategy, configuration interface, clock source, and high-speed I/O constraint against the relevant hardware design guide. Confirm that the selected memory transceivers, board connectors, and auxiliary power regulators support the electrical requirements of the selected speed grade. This page combines device identification, package details, practical design guidance, and engineering-focused application analysis to support faster FPGA sourcing, prototyping, and board-design decisions.

RFQ צור קשר
XCKU035-2FBVA676E - 676-pin Kintex UltraScale FPGA | AMD
XCKU035-2FBVA676E

XCKU035-2FBVA676E - 676-pin Kintex UltraScale FPGA | AMD

The AMD (formerly Xilinx) XCKU035-2FBVA676E is a Kintex UltraScale field-programmable gate array (FPGA) IC delivering 355,474 logic cells (194,560 6-input LUTs), 19.45M total on-chip memory bits, and 312 user I/Os, fabricated in a 20 nm CMOS process and housed in a 676-ball flip-chip BGA (FCBGA-676) package. It is a logic-density mid-range device in the Kintex UltraScale family and is targeted at high-throughput DSP, 100G packet processing, and ASIC-prototyping workloads. The "-2" suffix denotes the -2 speed grade (the second-fastest bin in the family), and the "E" suffix denotes the extended (industrial) temperature screening of -40 C to +100 C. A Kintex UltraScale FPGA belongs to the broader UltraScale architecture family, which is positioned between cost-optimized Artix/Spartan devices and the highest-density Virtex UltraScale devices in the AMD product hierarchy. FPGAs (Field-Programmable Gate Arrays) are programmable logic devices containing large arrays of configurable logic blocks (CLBs), block RAM (BRAM), DSP slices, high-speed transceiver tiles (GTX/GTH), and clock-management tiles (CMTs/PLLs/MMCMs). The Kintex UltraScale tier targets price/performance-sensitive applications such as 100G optical line cards, software-defined radio, and high-end DSP prototyping. Key headline specifications include 1,700 Configurable Logic Blocks (CLBs) and 444,343 logic cells in some datasheet groupings (the modern nominal figure is 355,474), up to 19.45 Mbits of distributed + block RAM, 312 user I/Os in the FBVA676 package, and 16.3G transceivers (per UltraScale family documentation). The device integrates 20 CMT clock tiles and 240 DSP slices, providing substantial arithmetic throughput and flexible clocking. Architecturally, the Kintex UltraScale uses the UltraScale routing fabric with stacked 3D silicon interposer-style back-bias routing, supporting up to 16.3 Gb/s transceivers for chip-to-chip and backplane SERDES. The 20 nm node and monolithic die deliver higher performance-per-watt than prior 28 nm 7-series Kintex devices while maintaining PCIe Gen3 hard-IP blocks. Typical applications for the XCKU035-2FBVA676E include 100G Ethernet bridge/router line cards, software-defined radio baseband cards, ASIC prototyping with 100% RTL mapping, high-end video processing, and DSP front-end for radar/medical imaging. The wide logic/memory/transceiver budget makes it the typical "starting point" for ADC-DAC-coupled signal-processing cards. When designing with the XCKU035-2FBVA676E, ensure multi-rail decoupling per the AMD UltraScale PCB Design Guide (UG583) for power-rail sequencing. The industrial temperature screen (E) allows deployment in outdoor telecom and industrial-control applications beyond commercial grade. This page combines verified distributor pricing, drop-in alternative analysis across the Kintex UltraScale family, and practical design notes not consolidated on the AMD datasheet.

RFQ צור קשר
XCKU035-2FBVA676I - Kintex UltraScale FPGA, 444K Logic Cells | AMD
XCKU035-2FBVA676I

XCKU035-2FBVA676I - Kintex UltraScale FPGA, 444K Logic Cells | AMD

The AMD XCKU035-2FBVA676I is a Kintex UltraScale Field Programmable Gate Array (FPGA) with 444,343 logic cells and 19,456,000 bits of block RAM, housed in a 676-ball Flip-Chip BGA package. Built on a 20nm process node and offered at a -2 (mid) speed grade, this device targets mid-range high-performance applications requiring an optimal balance of price, performance, and power efficiency. A Field Programmable Gate Array (FPGA) is a reconfigurable integrated circuit whose logic fabric, interconnect, and I/O can be programmed post-manufacture to implement arbitrary digital functions. FPGAs belong to the broader category of programmable logic devices (PLDs), which sit hierarchically under digital semiconductors and ICs. The Kintex UltraScale family from AMD (formerly Xilinx) addresses the spectrum between cost-optimized Artix and high-end Virtex devices, focusing on DSP, memory bandwidth, and transceiver integration. Key features of the XCKU035 include 312 maximum user I/Os, integrated DSP slices for high-throughput signal processing, dedicated block RAM (BRAM) for on-chip data storage, and high-speed serial transceivers suitable for chip-to-chip and backplane links. The device supports multiple configuration modes including JTAG, SPI, and BPI, enabling flexible boot strategies in production systems. The Kintex UltraScale architecture leverages a 20nm planar process with stacked-silicon interconnect (SSI) options in larger family members. The XCKU035 uses monolithic silicon, providing predictable performance and lower cost. The UltraScale architecture introduces enhanced routing, multi-die clocking, and improved DSP and BRAM utilization rates over prior 7-Series FPGAs. Typical applications of the XCKU035-2FBVA676I include high-speed data acquisition systems, software-defined radio (SDR) baseband processing, video broadcast equipment, industrial machine vision, 100G network interface cards, and aerospace telemetry. Its combination of logic density, memory bandwidth, and transceivers makes it well-suited for prototyping ASICs or low-volume production. When designing with the FBVA676 BGA, plan for high-density PCB fabrication with microvia or via-in-pad stackups, controlled-impedance traces for transceivers, and robust power distribution with high-frequency decoupling to satisfy simultaneous switching noise (SSN) requirements. This page synthesizes distributor pricing, FPGA drop-in alternatives within the same 676-BGA footprint, and practical design notes not typically presented in the manufacturer datasheet.

RFQ צור קשר
XCKU035-2FBVA900E - Kintex UltraScale FPGA | AMD
XCKU035-2FBVA900E

XCKU035-2FBVA900E - Kintex UltraScale FPGA | AMD

The AMD XCKU035-2FBVA900E is a Kintex UltraScale field-programmable gate array built around 444,343 logic cells and 1,700 configurable logic blocks in a 900-BBGA FCBGA package. The -2 designation identifies its performance speed grade, while the E suffix identifies the extended-temperature product option. The device is designed for high-throughput digital systems that require substantial parallel processing, high-speed serial links, and deterministic programmable logic. A field-programmable gate array, or FPGA, is a semiconductor device whose digital logic, interconnect, and I/O behavior are configured after manufacture. Within the product hierarchy, an FPGA is a programmable logic device, an application-specific integrated circuit alternative, and a semiconductor. Kintex UltraScale devices combine programmable logic with dedicated resources such as high-speed transceivers, DSP blocks, block RAM, and integrated memory controllers. Key characteristics of this configuration include 444,343 logic cells, 1,700 configurable logic blocks, and 520 input/output resources. The 900-BBGA package provides a high pin count suitable for parallel interfaces and multiple high-speed transceiver connections. A nominal 0.95 V core voltage is identified for the -2 device, while the available supply rails and configuration requirements must be followed according to the AMD data sheet for the specific package and speed grade. The -2 speed grade positions the XCKU035 between the lower-power -1 options and the highest-performance -3 option in the Kintex UltraScale family. Designers must also account for the large device's power consumption, thermal output, and multilayer PCB requirements. High-pin-count BGA construction calls for controlled escape routing, via-in-pad or via-beneath-array structures where appropriate, and careful power-plane distribution to maintain signal and power integrity. Typical applications include network infrastructure, video and image processing, high-speed data acquisition, industrial control, scientific instrumentation, and defense or communications systems. The device is particularly useful when a design requires deterministic parallel pipelines, real-time processing, or multiple simultaneous data paths and cannot be implemented efficiently in a smaller FPGA. When planning a board, use the AMD UltraScale package pinout files and the Kintex UltraScale data sheet to assign every package ball, power rail, configuration signal, and transceiver connection. Validate the selected -2 speed grade against the timing constraints of the design rather than relying on a generic device maximum. This page consolidates package, logic-resource, and sourcing information for engineers evaluating the XCKU035-2FBVA900E, together with verified same-family references, engineering selection guidance, and application-oriented design context that is not limited to a catalog parameter list.

RFQ צור קשר
XCKU035-2FBVA900I - Kintex UltraScale FPGA | AMD
XCKU035-2FBVA900I

XCKU035-2FBVA900I - Kintex UltraScale FPGA | AMD

The AMD XCKU035-2FBVA900I is a Kintex UltraScale field-programmable gate array with 444,343 logic cells, 468 user I/Os, and a 900-ball flip-chip BGA package. It uses 20 nm FPGA technology, supports internal core voltages spanning 0.922 V to 0.95 V, and combines programmable logic, DSP, block RAM, high-speed connectivity, and next-generation transceivers in one device. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic is configured after manufacture. An FPGA sits in the broader hierarchy of programmable logic devices, semiconductor integrated circuits, and digital processing systems. Its fabric contains configurable lookup tables, routing resources, fixed-function DSP blocks, block RAM, clocking, and input/output resources, allowing one package to implement multiple control, interface, and signal-processing functions. Key features include a 444,343-cell Kintex UltraScale fabric, 19,456,000 bits of block RAM, and 468 user I/O positions. AMD describes the device as using monolithic and next-generation stacked-silicon interconnect technology to balance performance, capacity, and cost. High DSP and block-RAM-to-logic ratios suit parallel filtering, FFT, video, and protocol-processing workloads, while the transceiver resources support high-speed serial links. The -2 speed designation identifies the device’s performance grade, while the FBVA900I ordering code identifies the 900-ball package and industrial temperature option. The FBVA package is designed for demanding boards where fine-pitch BGA routing, multilayer interconnects, controlled power delivery, and careful thermal design are essential. Its large I/O count also makes board escape routing and simultaneous-switching-noise analysis important parts of implementation. Typical applications include 100G networking equipment, data-center acceleration, industrial video processing, medical imaging, test and measurement systems, and high-throughput digital signal processing. In these systems, the FPGA can implement multiple pipelines in parallel while using block RAM for packet buffering and DSP blocks for filtering, modulation, or transforms. The large pin count also supports wide parallel interfaces when high-speed serial bandwidth is not required. Designers should treat the BGA substrate as a complete signal-integrity and power-delivery system. Use the manufacturer’s package pinout files and PCB guidance to assign every ball, plan power and ground planes, preserve return paths beneath high-speed interfaces, and control simultaneous switching activity. Validate the complete voltage regulator, decoupling, and thermal design across worst-case activity and ambient conditions. This product summary combines ordering data, package characteristics, pin-compatible options, application guidance, and PCB implementation considerations. It is designed to help engineers evaluate the XCKU035-2FBVA900I for high-density programmable-logic and signal-processing systems while keeping the final design tied to AMD’s official device documentation.

RFQ צור קשר
XCKU035-2FFVA1156E - Kintex UltraScale FPGA | AMD
XCKU035-2FFVA1156E

XCKU035-2FFVA1156E - Kintex UltraScale FPGA | AMD

AMD XCKU035-2FFVA1156E is a Kintex UltraScale field-programmable gate array with 444,343 programmable logic cells, 19,456,000 RAM bits, and 520 I/O in a 1156-pin FCBGA package. It combines substantial parallel-processing capacity with a high pin count for designs requiring extensive connectivity, high-speed interfaces, and hardware acceleration. An FPGA is a programmable semiconductor whose logic, memory, and I/O resources are configured after fabrication. In the product hierarchy, this device belongs to the Kintex UltraScale family of FPGAs and programmable logic devices. FPGAs are used when a design needs parallel operations, adaptable hardware, high throughput, or field-updatable functionality without replacing a fixed-function ASIC or microcontroller. The XCKU035-2FFVA1156E provides 444,343 logic cells, 19,456,000 RAM bits, and 520 I/O. The -2 ordering code identifies the -2 speed grade, while the 1156-pin FCBGA package supports dense board-level interconnect. The device is manufactured using 20 nm technology and uses a 0.95 V core voltage, positioning it for demanding parallel-processing systems rather than low-cost microcontroller control tasks. This Kintex UltraScale FPGA can implement parallel algorithms, protocol bridges, data acquisition pipelines, hardware accelerators, and embedded control logic in one device. Its 520 I/O make it especially useful where several high-speed interfaces and substantial external memory connectivity are required. FPGA resources should be mapped according to the AMD Vivado design flow, with timing constraints, clocking, pin placement, and power planning completed before implementation. Typical uses include high-speed data acquisition, industrial imaging, communications infrastructure, semiconductor test equipment, and embedded signal processing. The large logic and RAM resources allow multiple parallel lanes to operate concurrently, while the extensive I/O count supports memory interfaces and external peripherals. Configuration storage and boot behavior must be designed for the selected UltraScale platform and board configuration. A critical design consideration is the complexity of a 1156-pin BGA footprint. Escape routing, power-plane segmentation, decoupling, and via-in-pad or via-beneath-array construction must follow the package and board-design guidance. Pin assignment should be driven by the selected board schematic, and differential or high-speed pairs must be routed with controlled length and impedance. This page consolidates the confirmed device resources, package information, drop-in ordering alternatives, comparison parameters, and practical implementation guidance. It is intended to accelerate component selection and PCB planning for engineers evaluating the XCKU035-2FFVA1156E for high-density Kintex UltraScale implementations.

RFQ צור קשר
XCKU035-2FFVA1156I - 444343-Cell Kintex UltraScale FPGA | AMD
XCKU035-2FFVA1156I

XCKU035-2FFVA1156I - 444343-Cell Kintex UltraScale FPGA | AMD

The AMD XCKU035-2FFVA1156I is a Kintex UltraScale field-programmable gate array with 444343 programmable logic cells, 19,456,000 RAM bits, 520 I/O, and a 1156-pin FCBGA package. It is manufactured on a 20 nm process and operates with a 0.95 V core voltage. The device is designed for high-performance programmable-logic applications that require substantial parallel processing, dedicated block RAM, high-speed serial connectivity, and a large general-purpose I/O count. A field-programmable gate array is a semiconductor device whose digital logic and interconnect are configured after manufacture. Within the product hierarchy, an FPGA is a programmable-logic IC and a configurable silicon device. Compared with application-specific integrated circuits, an FPGA allows designers to adapt interfaces, parallel algorithms, and system functions in hardware while retaining the performance and flexibility of parallel hardware execution. The Kintex UltraScale family occupies the middle of the AMD/Xilinx product range between lower-density devices and larger UltraScale devices. The XCKU035 combines 444343 logic cells with 19,456,000 RAM bits and 520 I/O in a compact 1156-contact FCBGA. Its 20 nm fabrication process supports higher transistor density than older FPGA generations, while the 0.95 V operating point helps designers evaluate core power and thermal-management requirements. The I/O count is particularly useful for parallel sensor acquisition, data-center aggregation, industrial control, telecommunications, test equipment, and high-speed programmable signal-processing systems. The -2 portion of the part number identifies the device performance grade within the Kintex UltraScale ordering system. The FFVA1156 portion identifies the 1156-ball organic-finish FCBGA configuration, while the terminal I identifies the specified temperature grade. Designers must treat speed grade, temperature grade, and package as separate qualification dimensions because changing one ordering suffix does not necessarily preserve every qualification requirement of the original design. Typical deployments include network packet processing, high-throughput data acquisition, industrial automation, scientific instrumentation, communications infrastructure, defense electronics, and accelerator prototyping. In these applications, the FPGA can implement parallel datapaths, protocol handling, packet filtering, signal conditioning, and fixed-function acceleration without relying on a sequence of external processors. The large I/O and RAM resources also allow designers to buffer data locally and reduce transfers across external memory interfaces. The primary design consideration is that a 1156-ball BGA requires careful PCB escape routing, uninterrupted supply planes, via-in-pad or fanout-compatible assembly, and BGA-specific inspection. Signal-integrity analysis should cover every high-speed interface, while power planning should account for core, auxiliary, and I/O supplies separately. Differential-pair geometry, reference-plane continuity, and package-construction controls should follow AMD’s package pinout files and the applicable high-speed design guidance. This product record combines the exact ordering information, package characteristics, resource counts, lifecycle indication, compatible Kintex UltraScale alternatives, and engineering guidance needed for initial design review. It also identifies the limits of the current technical record so procurement and PCB teams can resolve remaining electrical, timing, thermal, and assembly requirements directly with AMD documentation.

RFQ צור קשר
XCKU035-2SFVA784E - 468 I/O Kintex UltraScale FPGA | AMD
XCKU035-2SFVA784E

XCKU035-2SFVA784E - 468 I/O Kintex UltraScale FPGA | AMD

The AMD XCKU035-2SFVA784E is a Kintex UltraScale FPGA in a 784-pin FCCSP BGA package, combining 468 user I/O with high-performance programmable logic and signal-processing resources. The device is built on 20 nm technology and is positioned for communications, industrial control, test equipment, signal processing, and high-speed embedded systems where substantial parallel connectivity is required. Its 784-pin package provides a large number of user I/O and power connections, making it suitable for designs requiring high-bandwidth interfaces, multiple external memory or sensor connections, and complex control logic. A Field Programmable Gate Array (FPGA) is a semiconductor device whose digital logic can be configured after manufacture. The FPGA hierarchy places the XCKU035-2SFVA784E in the programmable-logic and system-level integration category, where configurable logic blocks, DSP resources, block RAM, high-speed I/O, and dedicated clocking or power resources are combined into a single device. Compared with a fixed-function ASIC, an FPGA allows hardware behavior to be revised during development, prototyping, and field upgrades. Key device attributes include 468 user I/O, a 784-pin FCCSP BGA package, a 23 mm by 23 mm package format, a stated 20 nm process technology, and a 0.922 V to 0.979 V supply-voltage range. The package exposes substantially more connectivity than smaller FPGA packages, which supports wide parallel data paths and multiple board-level interfaces. The listed 44,343 and 25,391 figures in distributor catalog records correspond to additional catalog attributes, but their precise technical definitions require confirmation from the AMD device documentation before they are used in a design calculation. The XCKU035-2SFVA784E is intended for engineers building parallel processing systems, high-speed networking equipment, industrial automation, medical or scientific instrumentation, and embedded signal-processing platforms. Its 468 I/O count is particularly useful for systems that need multiple control buses, high-speed transceivers, parallel ADC or DAC interfaces, clock distribution, or external memory connections. The large BGA package also requires careful PCB layout, power-plane design, thermal analysis, and manufacturing inspection. Use the AMD package pinout files and the manufacturer datasheet when assigning power, ground, configuration, clock, and user-I/O pins. Do not infer BGA ball assignments from a generic package drawing, because the XCKU035 device-specific pinout determines legal connections. The E suffix identifies the commercial temperature-grade ordering option, while the I ordering code represents a different qualification class and should not be substituted without checking the full ordering guide. This product page combines catalog specifications, package information, sourced comparison references, and practical engineering guidance for engineers evaluating the XCKU035-2SFVA784E for high-density programmable-logic platforms.

RFQ צור קשר
XCKU035-2SFVA784I - 468 I/O Kintex UltraScale FPGA | AMD
XCKU035-2SFVA784I

XCKU035-2SFVA784I - 468 I/O Kintex UltraScale FPGA | AMD

AMD XCKU035-2SFVA784I is a Kintex UltraScale field-programmable gate array with 468 I/O channels, 444343 logic cells, and 19,456,000 bits of memory capacity, housed in a 784-BFBGA FCCSP package. The -2 designation identifies the performance grade, while the industrial-temperature suffix supports operation from -40°C to 100°C junction temperature. The device belongs to AMD's Kintex UltraScale family, built on a 20 nm process for high-performance programmable logic, signal processing, and high-speed connectivity. A field-programmable gate array is a semiconductor whose configurable logic, memory, and I/O resources can be programmed after manufacture. An FPGA sits above programmable logic within the broader digital semiconductor hierarchy, combining parallel or serial interfaces, digital signal processing, block RAM, and clocking resources in one device. This integration allows a board to implement multiple fixed-function ICs in a single reconfigurable silicon platform while shortening development cycles and supporting post-deployment updates. The XCKU035-2SFVA784I combines a large Kintex UltraScale logic resource with 468 user I/O in a high-pin-count BFBGA package. Its -2 speed grade provides a defined performance level for designs requiring substantial parallel processing or high-speed interface bandwidth. The package uses a fine-pitch ball-grid-array format intended primarily for multilayer PCB designs, where careful escape routing, via planning, and power-delivery design are essential. The 784-BFBGA package presents a demanding electrical and mechanical implementation challenge because hundreds of balls connect a large FPGA to a dense PCB. Designers must use a PCB stack-up and ball-out supported by the device documentation, provide clean power rails, preserve signal integrity on high-speed interfaces, and verify that the assembled board satisfies thermal and via-in-pad requirements. The industrial temperature rating makes the device suitable for equipment expected to operate across extended commercial and industrial environments, subject to correct thermal design. Typical uses include industrial control, test and measurement, networking, high-speed signal acquisition, video processing, and embedded communications systems. In these applications, the FPGA can implement parallel data paths, protocol conversion, real-time filtering, interface bridging, and control logic in one programmable device. Its combination of logic density, I/O availability, and 784-ball packaging supports systems where a smaller FPGA or several discrete logic devices would be less practical. Replacement planning must account for more than the device name. The speed grade, industrial-temperature suffix, package designation, and pinout all affect system timing, qualification, and PCB compatibility. A different package is not a drop-in replacement even when it uses the same Kintex UltraScale family, while a different speed or temperature grade can change design margins. Compare the exact ordering code and AMD documentation before approving a substitute. This product record combines the exact orderable MPN, package and resource details, verified cross-reference candidates, practical PCB considerations, and selection guidance. It supports engineers comparing FPGA capacity, package compatibility, industrial-temperature operation, and lifecycle needs before initiating a quote through the XAIPART Request a Quote form.

RFQ צור קשר
XCKU035-3FBVA676E - -3 Kintex UltraScale FPGA | AMD
XCKU035-3FBVA676E

XCKU035-3FBVA676E - -3 Kintex UltraScale FPGA | AMD

The AMD XCKU035-3FBVA676E is a Kintex UltraScale field-programmable gate array built on 20 nm FPGA technology, with 444,343 logic cells and a 676-ball FCBGA package. The -3 speed grade is the highest-performance grade in the XCKU035 family, making this device suited to demanding parallel processing, high-speed connectivity, signal processing, and accelerator workloads where logic density and timing performance are both important. A field-programmable gate array is a semiconductor whose digital logic, memory, and fixed hard blocks can be configured after manufacture. Within the product hierarchy, an FPGA is a programmable-logic semiconductor and a configurable SoC platform. The Kintex UltraScale family combines programmable logic fabric with high-speed serial transceivers, block RAM, DSP resources, and dedicated input/output resources for communications, industrial, defense, test, and embedded-processing systems. The XCKU035 device provides 444,343 logic cells, 1,945,600 related programmable resources, and 312 listed package-associated entries in the product listing. Its 676-ball FCBGA package supports a high-density pin arrangement required by a large FPGA. The -3 grade is specified for maximum performance within the family; the manufacturer documentation identifies -3 as the highest-performance speed grade, while -2, -1, and -1L are lower-speed or lower-static-power options. The device uses 20 nm FPGA technology and belongs to the Kintex UltraScale generation. Its architecture is intended for designs requiring substantial parallel logic, moderate-to-high-speed data movement, and flexible hardware customization. Exact transceiver count, DSP count, block-RAM capacity, I/O performance, operating-temperature limits, and power envelopes for the exact suffix must be confirmed in the package-specific AMD documentation before a production design is released. Typical Kintex UltraScale applications include high-speed network and storage interfaces, wireless and test-equipment basebands, industrial image processing, radar and signal-processing chains, high-performance embedded systems, and hardware accelerators. The large logic-cell count is especially useful when a design must combine parallel datapaths, buffering, protocol handling, control logic, and accelerator functions in one programmable device rather than across several fixed-function chips. PCB implementation should use the official 676-ball package outline, ball map, escape-routing rules, and power-decoupling recommendations. Because the package uses exposed thermal connections and high-speed I/O, plane assignment, via placement, return-path continuity, decoupling, and thermal management can materially affect signal integrity and junction temperature. This product page combines the exact XCKU035-3FBVA676E package and speed-grade identity with same-footprint family alternatives, application guidance, comparison parameters, and practical implementation notes. Verify the complete pin list, electrical limits, configuration method, and production status against AMD documentation for the exact ordering code before schematic capture or PCB release.

RFQ צור קשר
XCKU035-3FBVA900E - -3 Kintex UltraScale FPGA | AMD
XCKU035-3FBVA900E

XCKU035-3FBVA900E - -3 Kintex UltraScale FPGA | AMD

The AMD Xilinx XCKU035-3FBVA900E is a Kintex UltraScale field-programmable gate array built for high-performance programmable logic, signal processing, and accelerated system designs. The device uses the -3 speed grade, which AMD identifies as the highest-performance available Kintex UltraScale grade, and is packaged in a 900-BBGA FCBGA with 468 I/O sites. Its combination of large-scale parallel programmable logic and a high-density ball-grid-array package makes it suitable for demanding networking, industrial, test, defense, video, and compute-adjacent systems. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic can be configured after fabrication. The FPGA category sits above programmable logic devices in the broader semiconductor hierarchy and combines configurable logic blocks, block RAM, programmable I/O, dedicated processing resources, and high-speed interconnect fabric. Designers use this configurable architecture to implement parallel pipelines, protocol controllers, signal-processing functions, hardware accelerators, and complete interface subsystems without replacing custom silicon. The XCKU035 belongs to the Kintex UltraScale family, which balances large logic capacity with advanced serial connectivity and high-speed I/O. The -3 suffix identifies its performance grade, while FBVA900 identifies the 900-ball FCBGA package and E identifies the specified product-temperature option. The listed 468 I/O sites provide substantial board-level connectivity for high-speed memory, transceivers, clocks, and parallel interfaces. Exact resource counts, voltage ranges, transceiver counts, and timing limits should be confirmed against the AMD XCKU035 documentation for the selected design revision. At the architecture level, UltraScale devices organize programmable resources into advanced logic and memory blocks connected through a high-bandwidth network. This fabric supports wide parallel data paths and allows multiple logic, memory, and I/O-intensive blocks to operate concurrently. Designers can therefore partition functions into deterministic pipelines instead of relying on sequential processor execution. Board-level implementation still requires careful attention to pin assignment, power delivery, clock jitter, transceiver configuration, and thermal management. Typical applications include high-speed network-interface control, industrial automation and motion control, radar and signal-processing front ends, high-speed test equipment, video infrastructure, and embedded edge-computing systems. The 468-I/O package is particularly useful where a design needs numerous parallel interfaces alongside serial links. It is also appropriate for FPGA prototyping and hardware acceleration platforms that require considerably more parallel logic than small serial programmable logic devices. Design planning should begin with the AMD package pinout files and the device pin description, then reserve decoupling for each supply rail before assigning high-speed transceivers or external memory. A 900-BBGA device also requires a multilayer PCB with controlled-impedance routing, via-in-pad or equivalent interconnect structures, adequate thermal spreading, and assembly-process compatibility. Validate signal integrity, power sequencing, junction temperature, and configuration startup behavior in the final system rather than relying only on device-level simulation. This product record combines the exact AMD/Xilinx ordering code, package identity, I/O count, available speed-grade references, source documentation, and practical FPGA design guidance. It also identifies a same-package Kintex UltraScale option for speed or temperature planning while clearly separating those device options from true cross-brand equivalents.

RFQ צור קשר
XCKU035-3FFVA1156E - 20nm Kintex UltraScale FPGA | AMD
XCKU035-3FFVA1156E

XCKU035-3FFVA1156E - 20nm Kintex UltraScale FPGA | AMD

The AMD Xilinx XCKU035-3FFVA1156E is a Kintex UltraScale field-programmable gate array built on 20 nm process technology, with 444,343 logic cells, 19,456,000 RAM bits, and 520 I/Os in a 1156-pin FCBGA package. The -3 suffix denotes the target speed grade, while FFVA1156 identifies the 1156-pin fine-pitch ball-grid-array package. An FPGA is a programmable logic semiconductor whose lookup tables, registers, block RAM, digital signal processing resources, and I/O can be configured after manufacture. Within the semiconductor hierarchy, an FPGA belongs to programmable logic devices and sits between fixed-function logic ICs and software-driven processors. This combination makes the XCKU035 suitable when hardware parallelism, deterministic I/O, high-speed serial links, and reconfigurable interfaces are more important than minimizing silicon cost or power. The Kintex UltraScale family is positioned between AMD's lower-cost UltraScale devices and higher-end Virtex devices. The XCKU035 provides 520 I/Os, substantial embedded memory, and high-speed signal-processing bandwidth in one device. Its 20 nm implementation supports demanding signal processing, communications, industrial imaging, test equipment, and high-speed data-acquisition systems where deterministic parallel processing is beneficial. The 1156-pin FCBGA also exposes a large number of general-purpose and high-speed interface connections. The -3FFVA1156E ordering code separates device identity from implementation details. XCKU035 identifies the Kintex UltraScale device and its resource organization, -3 identifies the speed grade, FFVA identifies the package family, and 1156 identifies the ball count. The E suffix denotes the product's final orderable configuration. Designers should treat the FPGA configuration, power rails, pin constraints, and transceiver requirements as a matched set rather than treating the device as a conventional interchangeable IC. Typical uses include 100G networking equipment, medical imaging, heterogeneous wireless infrastructure, industrial signal processing, and embedded test systems. For networking and wireless designs, its high-speed transceivers and broad I/O count support dense serial interfaces. For medical and industrial imaging, parallel programmable logic and DSP resources can accelerate filtering, compression, and data reduction. Programmable behavior also supports field updates and product differentiation without a board respin. Board design requires careful separation of clean and noisy power rails, robust decoupling, length-aware routing for high-speed interfaces, and thermal analysis for sustained accelerator workloads. Follow the AMD package pinout files and UG575 when assigning balls, and validate every voltage, decoupling, and transceiver setting against the Kintex UltraScale data sheet. Configuration storage and programming connections should also be designed before the PCB layout is frozen. This page consolidates the exact orderable part number, package and resource data, speed-grade alternatives, comparison parameters, sourcing information, and practical implementation guidance. It helps engineers narrow a large FPGA portfolio while preserving the electrical, mechanical, and programming constraints required for a successful Kintex UltraScale design.

RFQ צור קשר
XCKU035-3SFVA784E - 444343 Logic Cells FPGA | AMD
XCKU035-3SFVA784E

XCKU035-3SFVA784E - 444343 Logic Cells FPGA | AMD

The AMD XCKU035-3SFVA784E is a Kintex UltraScale field-programmable gate array with 444,343 logic cells, 468 I/O, and 19,456,000 embedded memory bits, packaged in a 784-ball FCCSP BGA. The -3 designation identifies the highest-performance speed grade in the XCKU035 family. Its combination of substantial programmable logic, on-chip memory, and high I/O count supports demanding parallel processing, data acquisition, signal processing, and communication systems. A field-programmable gate array is a reconfigurable digital semiconductor in which interconnect and logic functions are established by loading a programmable configuration. Within the product hierarchy, an FPGA is a programmable logic device within the broader integrated-circuit category. Unlike a fixed-function ASIC, an FPGA allows field updates, hardware reuse, and shorter product-development cycles when logic requirements evolve after initial design. The XCKU035 family combines 444,343 logic cells with 19,456,000 embedded memory bits and as many as 468 I/O in this configuration. This resource density allows multiple parallel data paths to coexist within one device. The 784-ball package also supports high-density board escape routing, although its fine-pitch ball array requires careful PCB layout, controlled assembly, and comprehensive inspection. The -3 speed grade favors designs in which maximum logic performance is more important than lower power or cost. The -3SFVA784E ordering code identifies the device family, speed grade, package, and temperature or grade options. Programmable logic, DSP-oriented arithmetic, high-speed serial connectivity, and general-purpose I/O can be combined within the same Kintex UltraScale design. System designers should evaluate timing closure, power integrity, configuration storage, clocking, and transceiver requirements against their specific end product. Typical applications include high-speed data acquisition, industrial control, communications infrastructure, test and measurement, video processing, and high-throughput digital signal processing. The large logic and memory resources suit parallel algorithms, while the 468 I/O support extensive external connectivity. Projects with modest logic needs should use a smaller FPGA to reduce board area, power, and assembly complexity. PCB implementation is the central hardware consideration for this 784-ball device. Follow the AMD package pinout, recommended escape routing, and power-delivery guidance when defining the PCB stack-up. Validate high-speed nets, supply sequencing, configuration access, thermal paths, and assembly process controls before releasing production artwork. This page combines device-specific resource data, same-footprint alternatives, comparison parameters, and practical implementation guidance. It is designed to help engineers distinguish speed-grade and temperature-grade variants, prepare a pin-compatible replacement strategy, and select the appropriate Kintex UltraScale device for a complex FPGA system.

RFQ צור קשר
XCKU035-L1FBVA676I - Kintex UltraScale FPGA | AMD
XCKU035-L1FBVA676I

XCKU035-L1FBVA676I - Kintex UltraScale FPGA | AMD

The AMD Xilinx XCKU035-L1FBVA676I is a Kintex UltraScale field-programmable gate array with 312 I/O, 444343 programmable elements, and a 676-ball FCBGA package. It belongs to the XCKU035 device family and uses the -1L speed grade, which supports operation at either 0.95 V or 0.90 V VCCINT and is screened for lower maximum static power. Its combination of substantial programmable logic resources, high-speed serial connectivity, and a large ball-grid package makes it suitable for demanding embedded, networking, signal-processing, and test systems. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic and interconnect can be configured after manufacture. FPGAs occupy the programmable-logic portion of the semiconductor hierarchy, combining configurable logic blocks, block RAM, DSP resources, programmable I/O, clocking, and high-speed transceivers on one device. Compared with fixed-function application-specific integrated circuits, an FPGA provides shorter development cycles and field-updatable configurations. Compared with smaller programmable devices, the XCKU035 provides substantially more resources for parallel data paths and sophisticated control systems. Key characteristics include 312 I/O, 444343 programmable elements, and a 676-pin FCBGA package. The -1L family variant can operate with VCCINT at 0.95 V or 0.90 V. According to the AMD XCKU035 datasheet, the -1L devices are screened for lower maximum static power. This voltage flexibility gives designers an opportunity to balance switching performance and power consumption within the same device family. Exact resource counts, transceiver ratings, voltage tolerances, and power limits for the -1L ordering code must be confirmed in the package-specific AMD documentation before release. The XCKU035 architecture supports implementation of high-throughput parallel processing, protocol bridging, test and measurement logic, embedded control, and programmable signal-processing systems. Its large FCBGA package exposes a substantial number of user I/O and specialized high-speed pins, but it also demands careful PCB planning. Differential pairs, supply rails, clock inputs, and transceiver channels require controlled impedance, uninterrupted return paths, appropriate layer transitions, and power distribution that can meet the device's transient-current requirements. Typical uses include high-speed network interface equipment, radar and signal-processing installations, industrial vision systems, semiconductor test platforms, and communications infrastructure. The large package is appropriate when the design requires many external interfaces or high-speed lanes, while its industrial-grade ordering suffix supports deployment in industrial equipment. The -1L speed grade should be selected when lower static power and dual VCCINT operating options are priorities, provided the selected clocking and transceiver data rates remain within the grade's limits. PCB implementation must follow the AMD package pinout and UG575 UltraScale package guidance. Confirm every ball assignment against the exact XCKU035-L1FBVA676I package files, because a 676-ball footprint may contain power, ground, configuration, clock, and user-I/O balls that cannot be assigned arbitrarily. Preserve the manufacturer’s recommended layer stack, via geometry, decoupling strategy, and ball-field escape routing. Validate signal integrity and power integrity with the complete design, including worst-case processing, utilization, and I/O activity. This page combines the verified device identity, package information, searchable engineering queries, practical implementation guidance, and a conservative drop-in comparison. It also distinguishes the -1L ordering code from ordinary -1 variants so procurement, design review, and PCB release documentation remain aligned with the exact device ordering information.

RFQ צור קשר
XCKU035-L1FBVA900I - 35K Logic Cell Kintex UltraScale FPGA | AMD
XCKU035-L1FBVA900I

XCKU035-L1FBVA900I - 35K Logic Cell Kintex UltraScale FPGA | AMD

The AMD XCKU035-L1FBVA900I is a Kintex UltraScale field-programmable gate array (FPGA) with 468 user I/O pins, 25,391 logic array blocks, and 444,343 logic elements in a 900-ball FCBGA package. It is designed for demanding FPGA systems requiring high logic density, extensive parallel I/O, and programmable signal-processing capability. The -1 speed grade provides a balanced operating point for performance-oriented designs, while the L1 thermal and package options support industrial and telecommunications equipment. A field-programmable gate array is a programmable digital semiconductor that combines configurable logic blocks, programmable input/output resources, memory resources, clocking, and dedicated hardware blocks. The XCKU035-L1FBVA900I belongs to the Kintex UltraScale family, which is positioned between lower-cost FPGA families and larger UltraScale devices. Its 444,343 logic elements make it suitable for protocol bridging, industrial control, test equipment, communications infrastructure, embedded vision, and high-throughput data processing. Key device resources include 468 user I/O pins, 25,391 configurable logic blocks, and 444,343 logic elements. The 900-ball FCBGA package provides a large, high-density interconnect footprint for demanding board designs. The device is identified as a Kintex UltraScale FPGA by AMD and Xilinx product records, and its -1 speed designation identifies the performance grade used in the ordering code. The large I/O count supports systems that need numerous parallel connections to external memory, transceivers, converters, clocks, and external control logic. The FPGA fabric can implement parallel data paths, state machines, packet-processing functions, and application-specific pipelines. Dedicated resources should be selected according to the required clocking, memory-interface, serial-link, and signal-integrity functions for the target design. Typical uses include industrial automation, telecommunications and networking equipment, test and measurement systems, high-speed data acquisition, embedded processing platforms, and defense or aerospace equipment where programmable logic density and flexible I/O are important. The device can support multiple design teams by allowing functionality to be updated through configuration rather than redesigning dedicated application-specific silicon. PCB design requires careful attention to the 900-ball FCBGA land pattern, power delivery, ground-plane continuity, decoupling, and high-speed signal routing. Use the AMD package pinout files and the manufacturer’s board-design guidance when assigning balls and defining the power architecture. Differential and high-speed interfaces should follow the recommended layer stack-up, reference-plane, and length-matching rules. Configuration storage, clocking, reset, and programming interfaces must also be validated against the system power-up sequence. This page consolidates the exact device identity, package details, resource counts, sourcing information, and engineering considerations for engineers evaluating the XCKU035-L1FBVA900I. Use the manufacturer datasheet and package-pinout resources for authoritative electrical limits, configuration requirements, and board implementation details.

RFQ צור קשר
XCKU035-L1SFVA784I Low-Power Kintex UltraScale FPGA | AMD
XCKU035-L1SFVA784I

XCKU035-L1SFVA784I Low-Power Kintex UltraScale FPGA | AMD

The AMD XCKU035-L1SFVA784I is a Kintex UltraScale field-programmable gate array in a 784-BFBGA FCCSP package, offering 444343 programmable logic cells and a low-power -1L speed grade. Its core operating voltage is 0.95 V, while the -1L architecture also supports a 0.90 V VCCINT operating point for designs requiring lower maximum static power. A field-programmable gate array is a semiconductor device whose digital logic, memory blocks, signal-processing resources, and programmable I/O are configured after fabrication. A Kintex UltraScale FPGA belongs to the FPGA and CPLD product category, within the broader semiconductor and programmable-logic hierarchy. This makes the device suitable when designers need adaptable hardware, parallel processing, high-speed interfaces, or deterministic logic rather than a fixed application-specific function. The -1L grade is the key feature of the XCKU035-L1SFVA784I. AMD identifies -1L as a lower-static-power option compared with ordinary -1 and -2 grades, and the device can operate at either 0.95 V or 0.90 V VCCINT. Selecting the appropriate core voltage and power-management strategy is essential for balancing performance, static power, and thermal margin. The XCKU035 family combines substantial programmable logic with dedicated FPGA resources for parallel data processing. Its 784-pin BFBGA package supports a high pin count for power delivery, configuration, and high-speed I/O. Exact I/O standards, differential-pair counts, transceiver characteristics, memory interfaces, and operating-temperature limits must be selected from the AMD package tables for the specific board design. Typical uses include industrial control, test and measurement, communications infrastructure, high-speed data acquisition, video and image processing, and embedded systems requiring programmable logic. In these applications, the FPGA can implement parallel algorithms, protocol adaptation, timing control, or custom accelerator logic while allowing firmware-driven reconfiguration when system requirements evolve. Design work should begin with the AMD pinout files and UG575 package documentation. Confirm ball assignments, supply rails, decoupling, configuration pins, clock inputs, and exposed thermal requirements before PCB release. Because this is a large fine-pitch BFBGA, adequate copper thermal spreading, via arrays, clean power planes, and controlled-layout escape routing are central to a reliable implementation. This page combines package, speed-grade, and power-selection information with practical guidance for evaluating the XCKU035-L1SFVA784I, identifying same-package upgrade options, and preparing a high-pin-count FPGA layout. It also organizes the key sourcing questions engineers need to resolve when qualifying this exact device.

RFQ צור קשר
XCKU040-1FBVA676C - 530K-Cell Kintex UltraScale FPGA | AMD
XCKU040-1FBVA676C

XCKU040-1FBVA676C - 530K-Cell Kintex UltraScale FPGA | AMD

The AMD Xilinx XCKU040-1FBVA676C is a Kintex UltraScale field-programmable gate array built on a 20 nm process, providing 530,250 logic cells, 21,606,000 RAM bits, and 312 user I/O in a 676-pin FCBGA package. The device operates from a 0.95 V core supply and is assigned the -1 speed grade. A field-programmable gate array is a reconfigurable digital semiconductor that combines programmable logic, block RAM, digital signal processing resources, programmable I/O, and high-speed serial transceivers. Within the semiconductor hierarchy, an FPGA sits above fixed-function logic and general-purpose processors because its parallel architecture can accelerate bitstream-defined data paths. The Kintex UltraScale family occupies the performance and resource range between smaller UltraScale devices and larger UltraScale+ devices. The XCKU040 resource totals include approximately 242,400 logic blocks or CLBs, 530,250 logic elements or cells, and 21,606,000 RAM bits. Its 312 user I/O support digital connectivity on the board, while the -1 speed grade identifies its timing and power class. These resources make the device suitable for parallel processing, protocol handling, image processing, data acquisition, and embedded control systems requiring deterministic hardware execution. The FCBGA package integrates 676 package connections and supports dense board-level routing needed for high-speed interfaces and programmable logic. Its 27 x 27 mm form factor is confirmed for the XCKU040-1FBVA676C. Because this is a high-pin-count BGA device, exact power delivery, escape routing, and differential-pair layout must follow the AMD package pinout files and the applicable device guidance rather than general BGA assumptions. Typical deployments include industrial vision, test and measurement, communications infrastructure, scientific instrumentation, and embedded signal-processing systems. In these applications, the FPGA can execute multiple parallel data paths in parallel, reduce external processor loading, and provide deterministic latency through fixed hardware pipelines. The 312 user I/O also permit direct interfacing with sensors, converters, memory, and network transceivers. Designers should verify power sequencing, decoupling, thermal performance, and high-speed signal integrity against the AMD documentation for the exact package and speed grade. A 676-pin FCBGA also requires careful PCB stack-up, via-in-pad or microvia strategy, and assembly process control. Confirm the pinout by device rather than inferring it from another XCKU040 package option. This page consolidates the verified resource totals, package characteristics, speed-grade designation, and practical design considerations for the XCKU040-1FBVA676C. It also distinguishes same-footprint alternatives by speed and temperature grade so engineers can identify a suitable replacement without overlooking device qualification requirements.

RFQ צור קשר
XCKU040-1FBVA676I - Kintex UltraScale FPGA | AMD
XCKU040-1FBVA676I

XCKU040-1FBVA676I - Kintex UltraScale FPGA | AMD

The AMD Xilinx XCKU040-1FBVA676I is a Kintex UltraScale field-programmable gate array built on a 20 nm process, with 424,200 programmable logic cells, 312 user I/O, and a 676-ball FCBGA package. The -1 speed grade targets general-purpose industrial designs, while the industrial-temperature marking supports deployments across extended-temperature equipment. A field-programmable gate array, or FPGA, is a programmable semiconductor containing configurable logic blocks, programmable input/output resources, block RAM, DSP resources, transceivers, and dedicated clocking circuitry. Within the product hierarchy, an FPGA sits above programmable logic and below larger adaptive-computing devices. The Kintex UltraScale family balances high-speed logic, DSP, memory, and serial connectivity for demanding but broadly deployable systems. The XCKU040 combines 424,200 logic cells with 312 user I/O and 676 package balls in a compact square FCBGA package. Its 0.95 V core supply is specified for the device family, and the -1 performance grade represents the standard speed option rather than the higher -2 or -3 grades. Industrial temperature qualification makes the part suitable for factory automation, industrial control, networking equipment, instrumentation, and communications infrastructure where environmental margins matter. The UltraScale architecture provides programmable logic, substantial block-RAM capacity, and DSP resources that support parallel data processing. High-speed serial I/O resources enable communications links when the selected configuration and board-level clocking scheme permit. Designers should evaluate the specific UltraScale product-selection guide when determining transceiver usage, permitted configurations, speed grades, and power characteristics for the final design. Typical implementations include industrial Ethernet equipment, machine-vision controllers, radar and signal-processing subsystems, test equipment, video infrastructure, and embedded computing platforms. Because the FCBGA package has 676 contacts, board assembly requires a fine-pitch layout with careful via-in-pad, thermal, and assembly planning. For a new layout, place decoupling structures close to the power balls and preserve the pinout and power-and-ground recommendations in the AMD package documentation. For an existing design, confirm the exact package drawing, temperature grade, speed grade, and PCB stack-up before substituting another orderable code. This page consolidates lifecycle, package, lead-time, sourcing, and engineering information around the XCKU040-1FBVA676I and compares it with pin-compatible Kintex UltraScale ordering options. It also highlights practical PCB, thermal, and migration considerations that are normally spread across multiple technical documents.

RFQ צור קשר