MCP3426A4-E/SN
MCP3426A4-E/SN - 16-Bit Dual-Channel I2C ADC | Microchip
The Microchip Technology MCP3426A4-E/SN is a 16-bit, dual-channel, sigma-delta analog-to-digital converter with a maximum conversion rate of 240 samples per second and a 2.7 V to 5.5 V supply range. The device is packaged in an 8-pin SOIC and uses an I2C interface for digital communication. Its on-board 2.048 V precision reference supports a differential input range of ±2.048 V, while the A4 gain configuration is optimized for low-noise measurement at 15 samples per second.
A sigma-delta ADC is a voltage-to-digital converter that uses oversampling, digital filtering, and noise shaping to obtain high resolution from low-noise analog inputs. Within the data-converter hierarchy, the MCP3426 belongs to the delta-sigma ADC family, which is a type of ADC used for precision measurement. Its two-channel differential architecture suits instrumentation, industrial sensing, and low-frequency process-control systems where accurate conversion of small analog signals is more important than maximum sampling speed.
The principal features include up to 16-bit resolution, two analog input channels, an integrated 2.048 V reference, differential input capability, an I2C interface, and operation from 2.7 V to 5.5 V. The A4 configuration converts at 15 samples per second, providing a comparatively slow conversion rate that supports high-resolution, low-noise acquisition. The manufacturer identifies the operating temperature range as -40 °C to +125 °C, making the device suitable for industrial and extended-temperature equipment.
The converter’s sigma-delta architecture shifts much of the signal processing into the digital filter. This is useful when measuring slowly changing sensor outputs because in-band noise can be reduced without requiring a high-frequency SAR converter. Differential inputs also allow a sensor to be measured across two signal nodes, rejecting common-mode disturbances when the sensor return is referenced appropriately. The integrated reference removes the need for an external reference source, simplifying analog front-end design.
Typical uses include pressure and temperature sensor acquisition, current measurement, laboratory instrumentation, environmental monitoring, and low-speed industrial data logging. In these systems, the MCP3426A4-E/SN can digitize a differential sensor output and report the conversion through the I2C bus to a microcontroller or embedded controller. The 240 samples-per-second device-family maximum provides design margin for configurations that require faster acquisition than the A4 operating rate.
For reliable implementation, follow the manufacturer datasheet for analog input biasing, bypass-capacitor placement, I2C pull-up selection, and input common-mode limits. Pay particular attention to source impedance and differential polarity because excessive impedance or an out-of-range common-mode voltage can degrade conversion accuracy. Place input and supply decoupling close to their associated pins and route the differential pair to minimize pickup of switching noise.
This product page combines the manufacturer’s published device characteristics with practical application guidance, pin-assignment information, lifecycle status, sourcing workflow, and a constrained comparison of directly relevant family variants. It is designed to help engineers determine whether the MCP3426A4-E/SN matches the resolution, channel count, interface, speed, package, and temperature requirements of a new precision-measurement design.
RFQ
צור קשר