MCP3426A7-E/MS - 16-Bit Dual-Channel ADC | Microchip
MPN: MCP3426A7-E/MS ✓ פעילMCP3426A7-E/MS סקירה
A delta-sigma ADC is an analog-to-digital converter category that uses oversampling and digital filtering to trade conversion speed for high resolution and noise performance. The MCP3426 belongs to the ADC and DAC hierarchy within integrated circuits, where it converts continuously varying analog voltages into digital values for measurement, control, monitoring, and data-acquisition systems.
The principal features of the MCP3426A7-E/MS include 16-bit resolution, two differential input channels, a 15 SPS conversion rate, and a 2.048 V onboard reference. Its differential input architecture supports common-mode rejection, while the 2.7 V to 5.5 V supply range accommodates both 3.3 V and 5 V systems. The I2C interface reduces the number of connections required for communicating conversion results with a host controller.
Technically, the converter combines a delta-sigma modulator with internal digital filtering to suppress high-frequency noise and achieve fine resolution. The internal reference establishes a differential input range of ±2.048 V when the reference is used. Conversion speed is intentionally modest at 15 SPS, allowing the device to focus on accuracy and noise rejection rather than high-bandwidth acquisition.
Typical uses include industrial process monitoring, sensor instrumentation, battery-operated measurement instruments, environmental logging, laboratory data acquisition, and low-frequency pressure or temperature sensing. The dual-channel configuration allows two related analog quantities to be measured while retaining a compact 8-pin footprint.
Designers should place input and reference components close to the device, keep analog traces away from switching-node and digital clock paths, and verify the input voltage against the selected gain and reference configuration. The 15 SPS conversion rate must also be considered when designing closed-loop controls or sampling waveforms that contain significant high-frequency content.
This product page combines the manufacturer’s device description, distributor specifications, package information, application guidance, and a clearly qualified drop-in comparison. It also identifies the measurement, interface, layout, and performance constraints that determine whether this low-speed precision ADC fits a particular sensor or control design.
חלופות תחליף ישיר עבור MCP3426A7-E/MS — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
MCP3426A7T-E/MS
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
MCP3426A7-E/MS דירוגים מרביים ומאפיינים חשמליים
| רזולוציה | 16 bit |
| Analog Input Channels | 2 channels |
| Input Architecture | Differential inputs |
| Conversion Technology | 1-channel-per-input delta-sigma architecture |
| Maximum Conversion Rate | 15 samples per second |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Nominal Supply Voltage | 3.3 V or 5 V |
| Onboard Reference Voltage | 2.048 V |
| Differential Input Range | ±2.048 V |
| Digital Interface | I2C |
| טווח טמפרטורת פעולה | -40 °C to +125 °C |
| מארז | 8-pin MSOP |
| סוג הרכבה | Surface mount |
| סטטוס RoHS | Compliant |
מדריך תצורת פינים של MCP3426A7-E/MS 8-pin msop
תצורת פינים עבור MCP3426A7-E/MS (מארזת 8-pin msop). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.
אין נתוני פריסת פינים מפורטים עבור MCP3426A7-E/MS.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
MCP3426A7-E/MS מתאים עבור 6 יישוםs: Industrial Temperature Sensing, Pressure Transducer Acquisition, Battery Monitoring and Portable Instruments, Environmental Monitoring, Laboratory Data Acquisition, Process Control and Monitoring.
Industrial Temperature Sensing
The MCP3426A7-E/MS fits industrial temperature measurement because it combines 16-bit resolution with two differential input channels and a 15 SPS conversion rate. One channel can monitor a precision thermistor or RTD bridge while the other tracks a reference or compensation signal. According to the Microchip MCP3426 datasheet, differential operation improves rejection of common-mode disturbance, while the onboard 2.048 V reference supports a defined ±2.048 V measurement range. Design the bridge and front-end network to keep both differential inputs within the selected gain’s permitted range, and allow time between conversions when calculating control-loop update rates.
מומלץ
Pressure Transducer Acquisition
The MCP3426A7-E/MS is appropriate for low-speed pressure transducer acquisition where differential excitation and measurement improve signal integrity. Its 16-bit delta-sigma converter can resolve small bridge outputs, and the dual-channel architecture can acquire the sensor signal alongside a temperature, supply, or calibration reference. According to the Microchip manufacturer product page, the converter supports differential inputs and an onboard 2.048 V reference. Use an instrumentation-amplifier or application-specific front end when transducer excitation and common-mode voltage exceed the ADC input limits, and verify the 15 SPS update rate against the pressure dynamics of the mechanical system.
מומלץ
Battery Monitoring and Portable Instruments
The MCP3426A7-E/MS suits portable battery-powered instruments because its 2.7 V to 5.5 V supply range accommodates 3.3 V and 5 V systems, while the 15 SPS rate matches slowly varying battery and current measurements. The 16-bit resolution provides ample code density for monitoring pack voltage, load current, and a second analog quantity through differential inputs. According to the Microchip MCP3426 datasheet, the converter supports an I2C host interface and an onboard 2.048 V reference. Account for reference and front-end offsets during calibration, and disable or reduce conversion activity when longer battery life is more important than continuous measurements.
מומלץ
Environmental Monitoring
The MCP3426A7-E/MS can digitize slow environmental signals such as humidity, carbon dioxide, soil moisture, or light levels when the sensor outputs are conditioned to the ADC input range. Two differential channels allow simultaneous measurement of an active sensor and a reference channel used for drift compensation. According to the Microchip MCP3426 product page, the device provides 16-bit resolution, differential inputs, and an onboard 2.048 V reference. Its 15 SPS conversion rate is appropriate for environmental trends rather than rapid transients, while the I2C interface supports connection to a low-power monitoring controller. Protect external inputs from moisture and electrostatic discharge according to the enclosure and circuit requirements.
מומלץ
Laboratory Data Acquisition
The MCP3426A7-E/MS provides useful precision in a laboratory measurement front end when signals change slowly and high resolution matters more than high throughput. The two differential channels can acquire a conditioned transducer output and a calibration or diagnostic input, while 16-bit resolution reduces quantization error in the recorded results. According to the Microchip MCP3426 datasheet, operation from 2.7 V to 5.5 V and communication through I2C simplify integration with laboratory controllers. Keep analog input traces short and away from digital and switching signals, and use a low-noise reference strategy when absolute measurement uncertainty must be controlled across multiple temperature conditions.
מומלץ
Process Control and Monitoring
The MCP3426A7-E/MS can monitor slow process variables such as tank level, flow proxies, heater resistance, and supply rails in industrial control systems. Differential inputs help reject shared ground and common-mode disturbances when the sensors are connected through a balanced interface, while the two-channel capability supports a measurement plus reference arrangement. According to the Microchip MCP3426 datasheet, the converter achieves 16-bit resolution at up to 15 SPS and uses I2C for controller communication. Confirm that the process control loop can operate at this update rate, and design input protection and filtering to withstand industrial transients without degrading measurement accuracy.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור MCP3426A7-E/MS — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | MCP3426A7T-E/MS |
|---|---|---|
| Package | 8-pin MSOP | 8-pin MSOP |
| Brand | Microchip Technology | Microchip Technology |
| ADC Resolution | 16 bit | 16 bit |
| Analog Input Channels | 2 channels | 2 channels |
| Conversion Rate | 15 samples per second | 15 samples per second |
| Supply Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| Digital Interface | I2C | I2C |
| Conversion Technology | Delta-sigma | Delta-sigma |
| Input Configuration | Differential inputs | Differential inputs |
| Onboard Reference | 2.048 V | 2.048 V |
מבדילים עיקריים
- High resolution combined with a slow conversion rate (לעומתMCP3426A7T-E/MS)
- Two differential channels in an 8-pin MSOP (לעומתMCP3426A7T-E/MS)
- Integrated 2.048 V reference (לעומתMCP3426A7T-E/MS)
הערות תכנון
Route the two differential input channels as short, closely matched pairs and keep them away from I2C clock traces, switching nodes, and high-current return paths. Place input filtering and protection components near the ADC pins rather than near the sensors, where long analog traces could increase susceptibility to coupling. Provide a quiet ground return for the analog section and use the package and datasheet pin assignments when defining the PCB footprint.
Decouple the 2.7 V to 5.5 V supply close to the device with the capacitance and ESR requirements stated in the manufacturer datasheet. Keep analog and digital return currents separated as far as the board construction permits, and avoid sharing a narrow return segment with switching converters or relay drivers. Confirm that supply ripple and noise remain within the ADC’s allowable limits because they can otherwise degrade conversion accuracy and apparent resolution.
Do not treat a 16-bit resolution figure as guaranteed end-to-end accuracy. Overall error also includes reference error, gain error, offset, input noise, front-end errors, and quantization. Check whether the measurement signal can remain within the input limits for the selected gain and reference, and confirm that the 15 SPS conversion rate satisfies the application’s timing. The -40 °C to +125 °C operating range also requires component-level thermal verification in the final assembly.
Use anti-alias filtering tailored to the 15 SPS conversion rate so that out-of-band noise is attenuated before reaching the delta-sigma modulator. For slowly varying sensors, a modest RC network may be adequate, but resistance and capacitor selection must preserve differential channel matching and settle after each conversion. Verify the complete input path with the intended source impedance because long sensor wiring can introduce leakage, pickup, and unbalanced filtering.
מידע על תאימות
RoHS compliance is identified by the component listing. REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer or current material declaration.