LM339MX vs LM339ADE4 השוואה
השוואה מפורטת זה לצד זה של LM339MX מאת Texas Instruments ו LM339ADE4 מאת Texas Instruments. השווה מפרטים עיקריים, פרמטרים חשמליים, אריזה, סטטוס מחזור חיים, תמחור וזמינות כדי לקבוע את הרכיב הטוב ביותר לדרישות העיצוב שלך.
השוואת מפרטים
| פרמטר | LM339MX | LM339ADE4 |
|---|---|---|
| מותג | Texas Instruments | Texas Instruments |
| קטגוריה | Amplifier ICs | Logic ICs |
| סטטוס מחזור חיים | פעיל | פעיל |
| Comparator Type | General Purpose | Differential comparator |
| Number of Comparators | 4 | — |
| Supply Voltage Range | Approximately 36 V total, or approximately ±18 V | 2 V to 36 V |
| Single or Dual Supply Operation | Supported | — |
| Response Time | 1.3 µs | — |
| סוג פלט | Open-Collector | Open collector |
| Output Compatibility | TTL, CMOS, MOS, DTL, and ECL | — |
| טווח טמפרטורת פעולה | 0 °C to 70 °C | [DATA_NEEDED: operating temperature range] |
| מארז | 14-pin SOIC | 14-pin SOIC |
| סוג הרכבה | Surface Mount | Surface mount |
| מספר פינים | 14 | 14 pins |
| Channel Independence | 4 independent comparators | — |
| Common-Mode Input Voltage Range | [DATA_NEEDED: common-mode input voltage range] | — |
| Differential Input Voltage Range | [DATA_NEEDED: differential input voltage range] | -38 V to +38 V |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| זרם אספקה | [DATA_NEEDED: supply current] | — |
| Output Sink Current | [DATA_NEEDED: output sink current] | — |
| Output Saturation Voltage | [DATA_NEEDED: output saturation voltage] | — |
| Pull-Up Resistor | [DATA_NEEDED: recommended pull-up resistor] | — |
| סטטוס RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Number of Channels | — | 4 channels |
| Propagation Delay | — | 300 ns typical |
| Common-Mode Input Range | — | Includes ground |
| Supply Current Drain | — | 0.8 mA typical |
| Logic Compatibility | — | TTL, MOS, and CMOS compatible |
| Grade | — | Commercial grade |
| Package Width | — | 3.90 mm |
| Input Bias Current | — | Low input bias current; exact value [DATA_NEEDED: input bias current] |