MAX3490EESA+ vs MAX3490CSA+ השוואה
השוואה מפורטת זה לצד זה של MAX3490EESA+ מאת Analog Devices ו MAX3490CSA+ מאת Analog Devices. השווה מפרטים עיקריים, פרמטרים חשמליים, אריזה, סטטוס מחזור חיים, תמחור וזמינות כדי לקבוע את הרכיב הטוב ביותר לדרישות העיצוב שלך.
השוואת מפרטים
| פרמטר | MAX3490EESA+ | MAX3490CSA+ |
|---|---|---|
| מותג | Analog Devices | Analog Devices |
| קטגוריה | Interface ICs | Interface ICs |
| סטטוס מחזור חיים | פעיל | פעיל |
| Product Type | RS-485/RS-422 transceiver | RS-422/RS-485 interface transceiver |
| מתח אספקה | 3.3 V | 3.3 V |
| Maximum Data Rate | 12 Mbps | — |
| ESD Protection | ±15 kV | [DATA_NEEDED: ESD protection rating] |
| Driver Count | 1 driver | 1 |
| Receiver Count | 1 receiver | 1 |
| Communication Standards | RS-485 and RS-422 | — |
| Driver Type | Slew-rate limited | Slew-rate-limited true RS-485/RS-422 driver |
| מארז | 8-pin SOIC | 8-pin SOIC |
| סוג הרכבה | Surface mount | Surface Mount |
| Production Status | Production | — |
| טווח טמפרטורת פעולה | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| זרם אספקה | [DATA_NEEDED: supply current] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| Receiver Fail-Safe Behavior | [DATA_NEEDED: receiver fail-safe behavior] | — |
| Shutdown Function | [DATA_NEEDED: shutdown function] | — |
| סטטוס RoHS | unknown | [DATA_NEEDED: RoHS compliance] |
| REACH Status | unknown | [DATA_NEEDED: REACH compliance] |
| AEC-Q100 Qualification | unknown | not_applicable |
| קצב נתונים | — | 10 Mbps |
| Supported Standards | — | RS-422 and RS-485 |
| Communication Mode | — | Differential |
| Network Capability | — | RS-422 point-to-point and RS-485 multipoint |
| Power Consumption | — | [DATA_NEEDED: quiescent current and supply current] |
| Common-Mode Range | — | [DATA_NEEDED: common-mode voltage range] |
| Driver Output Current | — | [DATA_NEEDED: output current] |
| Receiver Sensitivity | — | [DATA_NEEDED: receiver input sensitivity] |
| Termination | — | External network termination required for RS-485 applications |