TL074CDR vs LM324DR2 השוואה
השוואה מפורטת זה לצד זה של TL074CDR מאת Texas Instruments ו LM324DR2 מאת onsemi. השווה מפרטים עיקריים, פרמטרים חשמליים, אריזה, סטטוס מחזור חיים, תמחור וזמינות כדי לקבוע את הרכיב הטוב ביותר לדרישות העיצוב שלך.
השוואת מפרטים
| פרמטר | TL074CDR | LM324DR2 |
|---|---|---|
| מותג | Texas Instruments | onsemi |
| קטגוריה | Amplifier ICs | Amplifier ICs |
| סטטוס מחזור חיים | פעיל | פעיל |
| Amplifier Type | JFET-Input Operational Amplifier | — |
| Number of Channels | 4 (Quad) | — |
| Gain Bandwidth Product (GBW) | 3 MHz (typical) | — |
| Slew Rate | 13 V/us (typical) | 0.6 V/µs |
| Input Bias Current | 30 pA (typical) | 45 nA typical |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage for TL074C grade] | 9 mV maximum |
| Equivalent Input Noise Voltage | 18 nV/sqrt(Hz) at 1 kHz (typical) | — |
| Total Harmonic Distortion (THD) | <= 0.003% (typical) | — |
| Supply Voltage - Single Supply | 7 V to 36 V | — |
| Supply Voltage - Dual Supply | +/-3.5 V to +/-18 V | — |
| טמפרטורת פעולה | 0C to +70C | — |
| Output Current (per channel) | [DATA_NEEDED: short-circuit output current spec] | — |
| מארז | 14-SOIC (D) 3.90 mm | 14-pin SOIC |
| סוג הרכבה | Surface Mount | Surface mount |
| רמת MSL | 1 (unlimited) | — |
| סטטוס RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free | Yes | — |
| Frequency Compensation | Internal (unity-gain stable) | — |
| Amplifier Count | — | 4 amplifiers |
| Operating Supply Range | — | 3 V to 32 V |
| Maximum Total Supply Voltage | — | 32 V |
| Gain-Bandwidth Product | — | 1 MHz |
| Differential Input Type | — | True differential input |
| Total Pin Count | — | 14 pins |
| Product Classification | — | Standard general-purpose amplifier |
| Operating Supply Mode | — | Single supply |
| Output Current | — | [DATA_NEEDED: output current] |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| טווח טמפרטורת פעולה | — | [DATA_NEEDED: operating temperature range] |
| Power Dissipation | — | [DATA_NEEDED: power dissipation] |
| REACH Status | — | [DATA_NEEDED: REACH status] |