A3P250-1VQ100M - ProASIC3 FPGA 250K Gates | Microchip
MPN: A3P250-1VQ100M ✓ פעילA3P250-1VQ100M סקירה
A Field Programmable Gate Array (FPGA) is an integrated circuit that can be configured by the customer after manufacturing to implement custom digital logic. Unlike ASICs, FPGAs are reprogrammable, allowing design changes without re-fabrication. The ProASIC3 family uses flash-based configuration, which retains the program even when power is removed, providing instant-on capability and enhanced security. This places the A3P250-1VQ100M in the hierarchy: FPGA -> programmable logic device -> integrated circuit -> semiconductor.
Key features include 250K system gates, 3K logic elements, 68 user I/Os, and 36,864 bits of RAM. The device supports multiple I/O standards including LVCMOS, LVTTL, and PCI, and includes a PLL for clock management. Its flash-based architecture offers low power consumption, with a typical static power of only 0.02W, and is inherently immune to configuration bitstream corruption, making it ideal for safety-critical applications.
The A3P250-1VQ100M is built on a 130nm flash process, providing a balance of performance and power. It features a single-chip solution with no external boot memory required, reducing BOM cost and board space. The device is reprogrammable, allowing field updates, and includes security features to prevent reverse engineering. Its 272 MHz system performance supports a wide range of digital designs.
Typical applications include industrial control, automotive electronics, communications infrastructure, and consumer electronics. In industrial settings, the FPGA can implement motor control, sensor interfacing, and protocol bridging. In automotive, it supports in-vehicle networking and driver assistance systems. Its low power and small footprint make it suitable for portable and battery-powered devices.
When designing with this device, ensure proper power supply decoupling with 0.1uF and 10uF capacitors near the VCC and GND pins. The core voltage is 1.5V, and I/O banks can operate at 1.5V, 1.8V, 2.5V, or 3.3V depending on the bank voltage. Use the PLL for clock generation and consider the 68 I/O limit when planning pin assignments.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with a comprehensive resource for evaluating the A3P250-1VQ100M.
חלופות תחליף ישיר עבור A3P250-1VQ100M — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם A3P250-1VQ100M (אותו גורם צורה וטביעת רגל) — שונים ב System Gates, Maximum System Performance, Package, Core Supply Voltage, RAM Bits.
A3P250-VQ100M
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←A3P250-1VQ100I
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
A3P250-VQ100I
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
A3P250-PQG100
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←A3P250-1VQ100M דירוגים מרביים ומאפיינים חשמליים
| Family | ProASIC3 |
| System Gates | 250000 |
| Logic Elements | 3000 |
| User I/Os | 68 |
| RAM Bits | 36864 |
| Core Voltage | 1.5 V |
| System Performance | 272 MHz |
| מארז | 100-TQFP (VQFP-100) |
| סגנון הרכבה | SMD/SMT |
| Packaging | Tray |
| Number of PLLs | 1 |
| I/O Standards | LVCMOS, LVTTL, PCI |
| Configuration | Flash-based, reprogrammable |
| סטטוס RoHS | Compliant |
תצורת פינים של A3P250-1VQ100M
| פין 1 | IO_0 — User I/O pin 0 |
| פין 2 | IO_1 — User I/O pin 1 |
| פין 3 | IO_2 — User I/O pin 2 |
| פין 4 | IO_3 — User I/O pin 3 |
| פין 5 | IO_4 — User I/O pin 4 |
| פין 6 | IO_5 — User I/O pin 5 |
| פין 7 | IO_6 — User I/O pin 6 |
| פין 8 | IO_7 — User I/O pin 7 |
| פין 9 | IO_8 — User I/O pin 8 |
| פין 10 | IO_9 — User I/O pin 9 |
| פין 11 | IO_10 — User I/O pin 10 |
| פין 12 | IO_11 — User I/O pin 11 |
| פין 13 | IO_12 — User I/O pin 12 |
| פין 14 | IO_13 — User I/O pin 13 |
| פין 15 | IO_14 — User I/O pin 14 |
| פין 16 | IO_15 — User I/O pin 15 |
| פין 17 | IO_16 — User I/O pin 16 |
| פין 18 | IO_17 — User I/O pin 17 |
| פין 19 | IO_18 — User I/O pin 18 |
| פין 20 | IO_19 — User I/O pin 19 |
| פין 21 | IO_20 — User I/O pin 20 |
| פין 22 | IO_21 — User I/O pin 21 |
| פין 23 | IO_22 — User I/O pin 22 |
| פין 24 | IO_23 — User I/O pin 23 |
| פין 25 | IO_24 — User I/O pin 24 |
| פין 26 | IO_25 — User I/O pin 25 |
| פין 27 | IO_26 — User I/O pin 26 |
| פין 28 | IO_27 — User I/O pin 27 |
| פין 29 | IO_28 — User I/O pin 28 |
| פין 30 | IO_29 — User I/O pin 29 |
| פין 31 | IO_30 — User I/O pin 30 |
| פין 32 | IO_31 — User I/O pin 31 |
| פין 33 | IO_32 — User I/O pin 32 |
| פין 34 | IO_33 — User I/O pin 33 |
| פין 35 | IO_34 — User I/O pin 34 |
| פין 36 | IO_35 — User I/O pin 35 |
| פין 37 | IO_36 — User I/O pin 36 |
| פין 38 | IO_37 — User I/O pin 37 |
| פין 39 | IO_38 — User I/O pin 38 |
| פין 40 | IO_39 — User I/O pin 39 |
| פין 41 | IO_40 — User I/O pin 40 |
| פין 42 | IO_41 — User I/O pin 41 |
| פין 43 | IO_42 — User I/O pin 42 |
| פין 44 | IO_43 — User I/O pin 43 |
| פין 45 | IO_44 — User I/O pin 44 |
| פין 46 | IO_45 — User I/O pin 45 |
| פין 47 | IO_46 — User I/O pin 46 |
| פין 48 | IO_47 — User I/O pin 47 |
| פין 49 | IO_48 — User I/O pin 48 |
| פין 50 | IO_49 — User I/O pin 49 |
| פין 51 | IO_50 — User I/O pin 50 |
| פין 52 | IO_51 — User I/O pin 51 |
| פין 53 | IO_52 — User I/O pin 52 |
| פין 54 | IO_53 — User I/O pin 53 |
| פין 55 | IO_54 — User I/O pin 54 |
| פין 56 | IO_55 — User I/O pin 55 |
| פין 57 | IO_56 — User I/O pin 56 |
| פין 58 | IO_57 — User I/O pin 57 |
| פין 59 | IO_58 — User I/O pin 58 |
| פין 60 | IO_59 — User I/O pin 59 |
| פין 61 | IO_60 — User I/O pin 60 |
| פין 62 | IO_61 — User I/O pin 61 |
| פין 63 | IO_62 — User I/O pin 62 |
| פין 64 | IO_63 — User I/O pin 63 |
| פין 65 | IO_64 — User I/O pin 64 |
| פין 66 | IO_65 — User I/O pin 65 |
| פין 67 | IO_66 — User I/O pin 66 |
| פין 68 | IO_67 — User I/O pin 67 |
| פין 69 | VCC — Core power supply (1.5V) |
| פין 70 | GND — Ground |
| פין 71 | VCC — Core power supply (1.5V) |
| פין 72 | GND — Ground |
| פין 73 | VCC — Core power supply (1.5V) |
| פין 74 | GND — Ground |
| פין 75 | VCC — Core power supply (1.5V) |
| פין 76 | GND — Ground |
| פין 77 | VCC — Core power supply (1.5V) |
| פין 78 | GND — Ground |
| פין 79 | VCC — Core power supply (1.5V) |
| פין 80 | GND — Ground |
| פין 81 | VCC — Core power supply (1.5V) |
| פין 82 | GND — Ground |
| פין 83 | VCC — Core power supply (1.5V) |
| פין 84 | GND — Ground |
| פין 85 | VCC — Core power supply (1.5V) |
| פין 86 | GND — Ground |
| פין 87 | VCC — Core power supply (1.5V) |
| פין 88 | GND — Ground |
| פין 89 | VCC — Core power supply (1.5V) |
| פין 90 | GND — Ground |
| פין 91 | VCC — Core power supply (1.5V) |
| פין 92 | GND — Ground |
| פין 93 | VCC — Core power supply (1.5V) |
| פין 94 | GND — Ground |
| פין 95 | VCC — Core power supply (1.5V) |
| פין 96 | GND — Ground |
| פין 97 | VCC — Core power supply (1.5V) |
| פין 98 | GND — Ground |
| פין 99 | VCC — Core power supply (1.5V) |
| פין 100 | GND — Ground |
יישומים טיפוסיים
A3P250-1VQ100M מתאים עבור 6 יישוםs: Industrial Control, Automotive Electronics, Communications Infrastructure, Consumer Electronics, Medical Devices, Aerospace and Defense.
Industrial Control
The A3P250-1VQ100M is ideal for industrial control systems such as motor control, PLCs, and sensor interfacing. Its 250K gates and 68 I/Os allow implementation of custom logic for real-time control loops. The flash-based configuration ensures instant-on operation and high reliability in harsh environments. With 272 MHz performance, it can handle high-speed PWM generation and communication protocols like SPI and UART. The low power consumption (typical static power 0.02W) reduces thermal stress in sealed enclosures. The device's reprogrammability enables field updates for firmware improvements without hardware changes. Its small 100-pin VQFP package fits compact PCB layouts, and the 1.5V core voltage simplifies power supply design. The FPGA can interface with ADCs, DACs, and encoders directly, reducing external logic. For safety-critical applications, the flash-based architecture provides inherent immunity to configuration bitstream corruption, enhancing system reliability.
מומלץ
Automotive Electronics
In automotive applications, the A3P250-1VQ100M supports in-vehicle networking, driver assistance, and body control modules. Its 68 I/Os can interface with CAN transceivers, LIN buses, and sensor arrays. The flash-based configuration provides instant-on capability, essential for safety systems that must initialize immediately upon power-up. The device operates over a wide temperature range (industrial grade available) and is RoHS compliant, meeting automotive environmental standards. The 272 MHz performance enables real-time processing of sensor data for collision avoidance and lane departure warnings. The low power consumption is critical for battery-powered vehicles, reducing drain on the electrical system. The FPGA's reprogrammability allows over-the-air updates for feature enhancements. The 100-pin VQFP package is suitable for space-constrained ECUs, and the 1.5V core voltage is compatible with modern automotive power rails. The device's security features protect against unauthorized access to proprietary algorithms.
מומלץ
Communications Infrastructure
The A3P250-1VQ100M is well-suited for communications infrastructure such as base stations, routers, and protocol converters. Its 250K gates can implement packet processing, error correction, and protocol bridging. The 68 I/Os support various I/O standards including LVCMOS, LVTTL, and PCI, enabling direct interface with PHY chips and backplane logic. The 272 MHz system performance handles high-speed data streams, and the PLL provides flexible clock generation for multiple interfaces. The flash-based configuration ensures secure boot and prevents unauthorized bitstream copying. The low power consumption reduces cooling requirements in densely packed equipment. The device's reprogrammability allows in-field upgrades to support new protocols without hardware changes. The 100-pin VQFP package is ideal for line cards and small form-factor modules. The 1.5V core voltage is compatible with standard digital logic, simplifying power distribution. The device's reliability makes it suitable for 24/7 operation in carrier-grade equipment.
מומלץ
Consumer Electronics
In consumer electronics, the A3P250-1VQ100M can be used in smart home devices, gaming peripherals, and multimedia systems. Its low power consumption (0.02W static) is ideal for battery-powered devices like remote controls and wearables. The 68 I/Os allow interfacing with sensors, displays, and wireless modules. The flash-based configuration provides instant-on functionality, improving user experience. The 272 MHz performance supports real-time audio/video processing and user interface logic. The small 100-pin VQFP package fits compact designs, and the 1.5V core voltage is compatible with low-power SoCs. The device's reprogrammability enables firmware updates for feature additions and bug fixes. The RoHS compliance meets environmental regulations for consumer products. The FPGA can implement custom protocols for smart home connectivity, such as Zigbee or Z-Wave bridging. Its cost-effectiveness makes it suitable for high-volume consumer applications.
מומלץ
Medical Devices
The A3P250-1VQ100M is suitable for medical devices such as patient monitors, diagnostic equipment, and portable health devices. Its flash-based architecture provides high reliability and security, critical for medical applications. The 68 I/Os can interface with sensors, ADCs, and communication interfaces. The 272 MHz performance enables real-time signal processing for ECG, EEG, and pulse oximetry. The low power consumption extends battery life in portable devices. The device's reprogrammability allows firmware updates for new algorithms and features. The 100-pin VQFP package is compact for handheld devices. The 1.5V core voltage is compatible with low-power medical electronics. The device's security features protect patient data and prevent unauthorized access. The RoHS compliance meets medical device environmental standards. The instant-on capability ensures immediate operation when powered, which is essential for emergency medical equipment.
מומלץ
Aerospace and Defense
The A3P250-1VQ100M is used in aerospace and defense applications such as avionics, satellite systems, and secure communications. Its flash-based configuration provides inherent security against reverse engineering and bitstream tampering, meeting defense requirements. The 68 I/Os support various I/O standards for interfacing with sensors and communication links. The 272 MHz performance enables real-time processing for navigation and control systems. The device's low power consumption is critical for space-based systems where power is limited. The 100-pin VQFP package is suitable for compact avionics modules. The 1.5V core voltage is compatible with radiation-tolerant power supplies. The device's reprogrammability allows in-orbit updates for mission changes. The RoHS compliance meets environmental standards for aerospace. The instant-on capability ensures immediate operation after power-up, essential for safety-critical systems. The device's reliability is proven in harsh environments.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור A3P250-1VQ100M — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | A3P250-VQ100M | A3P250-1VQ100I | A3P250-VQ100I | A3P250-PQG100 |
|---|---|---|---|---|---|
| Package | 100-TQFP (VQFP-100) | 100-TQFP (VQFP-100) | 100-TQFP (VQFP-100) | 100-TQFP (VQFP-100) | 100-TQFP (VQFP-100) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Logic Elements | 3000 | 3000 | 3000 | 3000 | 3000 |
| User I/Os | 68 | 68 | 68 | 68 | 68 |
| RAM Bits | 36864 | 36864 | 36864 | 36864 | 36864 |
| Core Voltage | 1.5V | 1.5V | 1.5V | 1.5V | 1.5V |
מבדילים עיקריים
- Higher speed grade (-1) compared to standard A3P250-VQ100M (לעומתA3P250-VQ100M)
- Commercial temperature grade vs industrial variants (לעומתA3P250-1VQ100I)
- Flash-based configuration for security and instant-on (לעומתSRAM-based FPGAs)
הערות תכנון
The A3P250-1VQ100M requires a 1.5V core supply. Use a low-dropout regulator (LDO) or a DC-DC converter to provide this rail. Place 0.1uF and 10uF decoupling capacitors close to each VCC pin to minimize power supply noise. The typical static power is 0.02W, but dynamic power depends on logic activity and I/O toggling. Ensure the power supply can handle peak current during configuration and operation.
For the 100-pin VQFP package, ensure proper PCB layout with a solid ground plane and adequate copper pour for thermal dissipation. Route I/O signals with controlled impedance if using high-speed interfaces. Keep traces short to minimize parasitic capacitance. Follow the manufacturer's layout guidelines for the VQFP package to ensure reliable soldering and signal integrity.
A common pitfall is neglecting the I/O bank voltage requirements. Each I/O bank must be connected to the appropriate VCCIO voltage (1.5V, 1.8V, 2.5V, or 3.3V) to match the interfaced logic levels. Also, ensure the configuration pins are properly connected for programming. Do not leave unused I/Os floating; configure them as inputs with pull-ups or as outputs to avoid excessive current draw.
מידע על תאימות
RoHS compliant per distributor data. Other compliance details not specified in the provided data.
