A3P400-2PQ208 - 400K Gate ProASIC3 FPGA | Microchip
MPN: A3P400-2PQ208 ✓ פעילA3P400-2PQ208 סקירה
A field-programmable gate array, or FPGA, is a semiconductor whose digital logic is configured after manufacture. Within the product hierarchy, an FPGA belongs to programmable logic devices, alongside CPLDs, and provides denser parallel logic than a conventional microcontroller or discrete logic implementation. ProASIC3 devices combine flash-programmable configuration, user-programmable logic, and selectable I/O resources in a single integrated circuit.
The A3P400-2PQ208 provides four I/O banks, as described in Microchip's A3P1000 migration application note. Each bank has dedicated supply pins, allowing compatible voltage standards to be assigned within a bank. The device also supports 151 user I/O according to the product listing, enabling parallel interfaces to be implemented without an external programmable logic device.
The -2 ordering option identifies a specific performance grade, while the PQ208 suffix identifies the 208-pin package configuration. The exact timing constraints, supported I/O standards, configuration interface details, core-voltage range, and absolute maximum ratings should be taken from the package-specific tables in the manufacturer datasheet. Designers should also check the A3P400 pinout-change notice before applying a design that uses an earlier board revision.
Typical uses include industrial interfaces, protocol bridges, test equipment, control logic, and low-to-medium-complexity embedded systems. The ProASIC3 architecture is particularly useful when a design requires deterministic parallel logic, flexible I/O assignment, and field reprogrammability without changing the PCB. An external microcontroller or processor can handle supervisory functions while the FPGA executes parallel data acquisition, protocol handling, or control sequencing.
PCB design should preserve the manufacturer-recommended power, decoupling, clock, configuration, and I/O routing requirements. Because the A3P400 family uses four I/O banks, assigning incompatible voltage standards to the same bank can prevent correct operation. Confirm the final pin assignment against the current package pinout, reserve the required programming signals, and validate timing with the Microchip Libero design toolchain before fabrication.
This page combines the A3P400-2PQ208 device identity, verified product attributes, same-family replacement options, package constraints, and practical implementation guidance. It also highlights which performance and electrical details still require confirmation from the manufacturer documentation before layout release or production qualification.
חלופות תחליף ישיר עבור A3P400-2PQ208 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם A3P400-2PQ208 (אותו גורם צורה וטביעת רגל) — שונים ב Core Supply Voltage, Package, RoHS Status, System Gates, Configuration.
A3P400-2PQ208I
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
A3P400-PQ208I
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←A3P400-PQ208
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←A3P400-PQG208I
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←A3P400-2PQ208 דירוגים מרביים ומאפיינים חשמליים
| Device Type | ProASIC3 field-programmable gate array |
| System Gates | 400,000 gates |
| Logic Cells | 55,296 logic cells |
| User I/O | 151 I/O |
| Maximum Frequency | 310 MHz |
| Core Supply Voltage | 1.5 V |
| Process Technology | 130 nm CMOS |
| Logic Family | CMOS |
| מארז | 208-pin PQFP |
| מספר פינים | 208 pins |
| I/O Banks | 4 banks |
| טמפרטורת פעולה | 0 °C to +70 °C |
| Configuration Memory | Flash-programmable |
| סוג הרכבה | Surface mount |
| Device Performance Grade | -2 grade |
מדריך תצורת פינים של A3P400-2PQ208 208-pin pqfp
תצורת פינים עבור A3P400-2PQ208 (מארזת 208-pin pqfp). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור A3P400-2PQ208.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
A3P400-2PQ208 מתאים עבור 6 יישוםs: Industrial automation controller, Industrial communication interface, Test and measurement front end, Data acquisition and signal processing, Programmable control plane, Embedded communications gateway.
Industrial automation controller
The A3P400-2PQ208 fits industrial control logic that requires deterministic parallel operation, flexible interface assignment, and field-updatable configuration. Its 400,000 system gates, 55,296 logic cells, and 151 user I/O provide substantial capacity for sequencing, machine-state monitoring, and data acquisition without relying on a large microcontroller pin list. The four I/O banks allow compatible voltage standards to be grouped, although every external signal must remain within the selected bank's supply range. The 208-pin PQFP package also simplifies assembly for leaded industrial boards. Use the Libero flow for timing closure and verify the final I/O plan against the PQ208 pinout.
מומלץ
Industrial communication interface
The A3P400-2PQ208 is suitable for implementing parallel data acquisition, bus interface logic, and protocol conversion between modules with different data rates. Its 151 user I/O and 310 MHz maximum device frequency provide ample resources for sampling, framing, FIFO, and byte-order conversion functions. Four I/O banks help partition interfaces by voltage, provided compatible standards are assigned within each bank. Place termination, level translation, and isolation outside the FPGA when required by the system architecture. Validate setup and hold timing for every high-speed interface using the manufacturer timing analyzer and the final PCB load conditions.
מומלץ
Test and measurement front end
The A3P400-2PQ208 can coordinate parallel stimulus generation, timing control, and capture logic in a compact test-and-measurement instrument. Its 55,296 logic cells are well suited to parallel pipelines, counters, trigger logic, and digital pattern generation, while 151 I/O minimize external glue logic. The 310 MHz maximum frequency supports high-speed processing when the selected I/O standard and timing budget allow it. Four I/O banks permit separate logic domains for acquisition, control, and communications. Keep analog front-end circuitry outside the FPGA and follow the manufacturer grounding and decoupling guidance to preserve measurement integrity.
מומלץ
Data acquisition and signal processing
The A3P400-2PQ208 is appropriate for parallel sensor aggregation, digital filtering, and fixed-function signal processing where deterministic hardware execution is preferred. The device provides 400,000 system gates and 151 I/O for capturing multiple channels and maintaining control, status, and processing pipelines. A 310 MHz maximum clock allows pipelined architectures to achieve high throughput, subject to the package-specific timing constraints and selected I/O mode. Use separate I/O banks for incompatible voltage domains, add series damping where required by edge-rate calculations, and validate timing with realistic board models rather than ideal-pin assumptions.
מומלץ
Programmable control plane
The A3P400-2PQ208 can implement a programmable control plane for embedded equipment that needs flexible sequencing, peripheral bridging, and revision-independent logic. Its flash-based configuration allows field updates and provides a practical alternative to a large mask-programmed gate array. A microcontroller can manage supervisory functions, while the ProASIC3 device executes latency-sensitive parallel logic. The 208-pin PQFP format is compatible with conventional leaded-board assembly, and four I/O banks support organized voltage partitioning. Define reset, configuration, clock, and watchdog behavior before layout so failure recovery and field upgrades remain reliable.
מומלץ
Embedded communications gateway
The A3P400-2PQ208 can bridge several serial or parallel interfaces in an embedded gateway by dedicating programmable logic to framing, buffering, and protocol translation. Its 151 I/O provide enough parallel connections for common bridge architectures, and the 310 MHz maximum frequency supports pipeline-oriented throughput. The four-bank structure helps organize low- and high-voltage interface groups, provided each bank contains only compatible standards. Use clock buffers and controlled impedance routing for high-speed links, respect configuration pin requirements, and verify protocol timing with corner-case system clocks rather than relying only on the nominal device frequency.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור A3P400-2PQ208 — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | A3P400-2PQ208I | A3P400-PQ208I | A3P400-PQ208 | A3P400-PQG208I |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 208-pin PQFP | 208-pin PQFP | 208-pin PQFP | 208-pin PQFP | 208-pin PQFP |
| Device Family | ProASIC3 | ProASIC3 | ProASIC3 | ProASIC3 | ProASIC3 |
| System Gates | 400,000 gates | 400,000 gates | 400,000 gates | 400,000 gates | 400,000 gates |
| Logic Cells | 55,296 logic cells | 55,296 logic cells | 55,296 logic cells | 55,296 logic cells | 55,296 logic cells |
| User I/O | 151 I/O | 151 I/O | 151 I/O | 151 I/O | 151 I/O |
| Industrial Designation | Commercial ordering option | I suffix | I suffix | No I suffix | I suffix |
| Core Supply Voltage | 1.5 V | 1.5 V | 1.5 V | 1.5 V | 1.5 V |
| I/O Banks | 4 banks | 4 banks | 4 banks | 4 banks | 4 banks |
מבדילים עיקריים
- The -2 ordering option identifies the target's specific performance grade within the ProASIC3 A3P400 family. (לעומתA3P400-PQ208)
- The A3P400 family provides substantial logic and I/O density for compact embedded control designs. (לעומתA3P400-2PQ208I)
- Four dedicated I/O banks support organized voltage partitioning. (לעומתA3P400-PQ208I)
הערות תכנון
Plan the A3P400 supplies by voltage domain rather than treating the 1.5 V core rail and four VCCIBx bank supplies as interchangeable. Place the required bypass capacitors adjacent to their associated supply and ground pins, keep high-current paths compact, and provide clean return paths for every switching output. Microchip's A3P1000 migration application note states that A3P400 has four I/O banks with dedicated supplies and that only I/O signals with compatible standards can share a bank. Confirm capacitor values, supply tolerances, and power-up sequencing in the current A3P400 electrical tables.
Use the package-specific PQ208 land pattern and current pin-assignment table rather than a generic 208-pin footprint. Check the A3P400 pinout-change notice when reusing an existing design, since it identifies changes affecting A3P400-PQ208 and related packages. Reserve all configuration, clock, reset, and power pins, avoid routing fast signals beneath the device unless the layout rules explicitly permit it, and keep decoupling vias close to the relevant pins. A pin-assignment mismatch in a quad flat pack can produce assembly shorts that are difficult to diagnose.
Assign each interface to an I/O bank that supports its voltage and timing requirements. For high-speed outputs, derive termination and topology from the actual edge rate, trace length, load, and receiver threshold rather than from the 310 MHz maximum clock alone. Use the Libero timing analyzer with board-level assumptions and validate the highest-corner case. When multiple banks use different supply levels, preserve return-path continuity and avoid splitting a high-speed return current across a supply-plane split.
Do not treat A3P400-PQ208, A3P400-PQ208I, and A3P400-2PQ208I as unconditional substitutes even though the family and package are similar. Compare the complete ordering suffix, performance grade, temperature range, package markings, pinout, configuration method, and timing constraints. The target's -2 designation and the I or G identifiers can alter qualification even when the PCB outline remains compatible. Record the approved substitute as a controlled alternate part in the schematic and production documentation to prevent an unapproved suffix from entering a build.
מידע על תאימות
The component is a programmable-logic IC rather than an automotive-qualified device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation or declaration.