AD7738BRUZ-REEL - 24-Bit 8-Ch 8.5kHz Sigma-Delta ADC | Analog Devices
MPN: AD7738BRUZ-REEL ⚠ רכישה אחרונהAD7738BRUZ-REEL סקירה
What is a sigma-delta ADC? A sigma-delta (Σ-Δ) analog-to-digital converter is a type of ADC that oversamples the input signal and uses noise-shaping feedback to push quantization noise out of the baseband, yielding very high effective resolution at the cost of lower input bandwidth. Sigma-delta ADCs sit in the broader hierarchy of precision data-conversion ICs between SAR ADCs (faster, lower resolution) and integrating ADCs (slowest, highest DC accuracy), and the AD7738 represents the multiplexed, multi-channel end of that family where many transducer or sensor signals must be digitized in sequence.
Key specifications of the AD7738 include eight configurable analog input channels (software-configurable as four differential or eight single-ended), 24 bits of no-missing-code resolution, an output data rate up to 8.5 kHz, on-chip digital filtering, per-channel system calibration, and a flexible three-wire serial digital interface that is compatible with microcontrollers and digital signal processors. The differential reference input features "No Reference" detect capability, making the part especially robust for industrial sensor-conditioning designs where a missing reference would otherwise corrupt an entire measurement.
Architecturally, the AD7738 combines a switched-capacitor front end, a sigma-delta modulator, and a digital decimation filter with on-chip calibration registers per channel. Per-channel gain and offset correction allow the host to eliminate system-level errors at the analog front end, while the on-chip programmable gain amplifier lets one part accommodate a wide dynamic range of transducer outputs without external signal conditioning.
Typical applications include industrial process control weigh scales, multi-channel temperature or pressure acquisition modules, PLC analog input cards, and laboratory instrumentation front ends. The part's ability to digitize multiple channels sequentially with high DC accuracy makes it ideal where a single converter must service an entire sensor array.
Designers should pay close attention to analog input common-mode and reference decoupling, because the part's high resolution exposes ground-loop and switching-noise errors that lower-resolution ADCs would mask. The serial interface timing budget must accommodate channel-switching settle time before sampling, particularly when using the fastest 8.5 kHz throughput mode.
This page synthesizes distributor pricing, last-time-buy supply signals, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.
חלופות תחליף ישיר עבור AD7738BRUZ-REEL — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם AD7738BRUZ-REEL (אותו גורם צורה וטביעת רגל) — שונים ב Package, RoHS Status, ADC Architecture, Number of Input Channels, Reference Input.
AD7738BRUZ
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
AD7738BRUZ-REEL7
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
AD7738BRU-REEL7
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←AD7707BRZ-REEL
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←AD7708BRU-REEL
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←AD7719BRUZ-REEL
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←AD7738BRUZ-REEL דירוגים מרביים ומאפיינים חשמליים
| רזולוציה | 24 bits |
| Number of Input Channels | 8 (configurable as 4 differential / 8 single-ended) |
| ADC Architecture | Sigma-Delta (Σ-Δ) |
| Maximum Output Data Rate | 8.5 kHz (channel switching) |
| Conversion Time (16-bit p-p) | 117 µs |
| Effective Resolution (16-bit p-p) | True 16-bit p-p at fastest throughput |
| מארז | 28-TSSOP (RU) |
| Digital Interface | 3-wire SPI / DSP-compatible serial |
| Reference Input | Differential (with 'No Reference' detect) |
| Calibration | Per-channel system calibration (gain & offset) |
| Input Configuration | Bipolar/unipolar, software programmable |
| On-Chip Features | Programmable gain amplifier, digital filter, channel sequencer |
| Schmitt-Triggered Logic Inputs | Yes (all digital inputs) |
| סוג הרכבה | Surface Mount |
| Compliance | RoHS (per Analog Devices, RU suffix denotes Pb-free) |
| סטטוס מחזור חיים | Last Time Buy (per Analog Devices product page) |
תצורת פינים של AD7738BRUZ-REEL
| פין 1 | AVDD — Analog supply voltage |
| פין 2 | AGND — Analog ground |
| פין 3 | REFIN+ — Differential reference input positive |
| פין 4 | REFIN- — Differential reference input negative |
| פין 5 | AIN1 — Analog input channel 1 (or AIN1+ in differential) |
| פין 6 | AIN2 — Analog input channel 2 (or AIN1- in differential) |
| פין 7 | AIN3 — Analog input channel 3 (or AIN3+ in differential) |
| פין 8 | AIN4 — Analog input channel 4 (or AIN3- in differential) |
| פין 9 | AIN5 — Analog input channel 5 (or AIN5+ in differential) |
| פין 10 | AIN6 — Analog input channel 6 (or AIN5- in differential) |
| פין 11 | AIN7 — Analog input channel 7 (or AIN7+ in differential) |
| פין 12 | AIN8 — Analog input channel 8 (or AIN7- in differential) |
| פין 13 | NC — No connection |
| פין 14 | NC — No connection |
| פין 15 | DVDD — Digital supply voltage |
| פין 16 | DGND — Digital ground |
| פין 17 | MODE — Interface mode select (must be tied low for serial mode) |
| פין 18 | RESET — Reset input (active low) |
| פין 19 | CS — Chip select (active low) |
| פין 20 | SCLK — Serial clock input |
| פין 21 | DOUT — Serial data output (RDY) |
| פין 22 | DIN — Serial data input |
| פין 23 | RDY — Ready output (active low, open drain) |
| פין 24 | NC — No connection |
| פין 25 | STANDBY — Standby input (active high) |
| פין 26 | NC — No connection |
| פין 27 | NC — No connection |
| פין 28 | NC — No connection |
יישומים טיפוסיים
AD7738BRUZ-REEL מתאים עבור 7 יישוםs: Industrial Weigh Scale Front End, Multichannel Temperature Acquisition Module, PLC Analog Input Card, Process Control Pressure Transmitter, Laboratory Data Acquisition Front End, Power Meter Energy Measurement, Healthcare Patient Monitoring Sensor Hub.
Industrial Weigh Scale Front End
Provides 24-bit resolution across multiple load-cell channels for industrial weigh scales. The AD7738BRUZ-REEL delivers true 16-bit p-p resolution at 117 µs conversion, sufficient for stable bridge-excitation measurements even at the fastest 8.5 kHz channel-switching rate. With 8 inputs it can digitize up to 8 individual load cells before host-side averaging, simplifying multi-platform scale head designs. The on-chip PGA accommodates the wide dynamic range of strain-gauge outputs without external instrumentation amplifiers. Recommended for high-precision weighing instruments, hopper scales, and platform scales where synchronous multi-channel digitization is required.
מומלץ
Multichannel Temperature Acquisition Module
Digitizes arrays of thermocouple, RTD, or thermistor sensors with 24-bit no-missing-code resolution. The AD7738's 8 single-ended inputs match a typical thermocouple-isolation PCB that uses one channel per junction, eliminating the need for an external analog mux. The differential reference input rejects common-mode noise picked up in long sensor wiring runs, and the per-channel system-calibration registers compensate thermocouple-amplifier offset. Recommended for process-control chillers, HVAC monitoring, and discrete manufacturing test stations.
מומלץ
PLC Analog Input Card
Acts as the analog front end for PLC analog input modules requiring 8 isolated channels per module. The AD7738BRUZ-REEL's 8.5 kHz max throughput and per-channel system calibration let one ADC serve an entire 8-channel analog-card slot, halving BOM cost and PCB area versus lower-channel-count parts. The 50/60 Hz digital-filter rejection is critical for industrial mains-environment accuracy, and the 3-wire SPI interface connects directly to industrial MPU/DSP co-processors. Recommended for universal analog input modules, signal-conditioners, and PLC backplanes.
מומלץ
Process Control Pressure Transmitter
Serves as the multi-sensor digitizer inside pressure/differential-pressure smart transmitters. The AD7738BRUZ-REEL simultaneously digitizes pressure sensor, reference, and temperature-compensation channels with 24-bit dynamic range, eliminating drift through on-chip per-channel gain/offset calibration. The on-chip PGA accommodates the millivolt outputs of piezo-resistive bridges directly, removing a discrete instrumentation amp in the BOM. 'No Reference' detect prevents bad readings if the excitation reference is broken. Recommended for smart DP transmitters, flow meters, and field instruments.
מומלץ
Laboratory Data Acquisition Front End
Provides 8 channels of 24-bit analog input for benchtop data-acquisition systems and instrumentation front ends. The AD7738BRUZ-REEL's true 16-bit p-p at 8.5 kHz is well-matched to general benchtop DAQ where multi-channel sampling rates of a few kHz are typical, and where DC accuracy matters more than bandwidth. Programmable input ranges from unipolar to bipolar cover sensor, transducer, and bench-test signals. Recommended for oscilloscope DAQ plug-ins, precision multimeter DAQ boards, and lab bench instruments.
מומלץ
Power Meter Energy Measurement
Digitizes voltage and current channels in multi-phase electricity meters with 24-bit accuracy. The AD7738BRUZ-REEL accepts four differential current inputs plus four single-ended voltage inputs in a single chip, simplifying three-phase power-meter circuit design. Per-channel calibration compensates shunt-resistor temperature drift, and the digital-filter 50/60 Hz rejection avoids power-line harmonics corrupting the energy data. Recommended for three-phase energy meters, smart-metering modules, and power-quality analyzers.
מומלץ
Healthcare Patient Monitoring Sensor Hub
Acts as a multi-sensor analog input hub in patient monitoring equipment where multiple biopotential or transducer channels need simultaneous DC digitization. The AD7738BRUZ-REEL's per-channel offset calibration enables common-mode line-noise rejection across ECG, blood-oxygen, and respiration channels without requiring a front-end analog circuit per channel. The 8.5 kHz throughput supports even high-bandwidth multi-lead ECG and respiration monitoring. Recommend using a downstream isolation barrier for medical safety. Recommended for bedside monitors, multi-parameter monitors, and clinical instrumentation.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור AD7738BRUZ-REEL — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | AD7738BRUZ | AD7738BRUZ-REEL7 | AD7738BRU-REEL7 | AD7707BRZ-REEL | AD7708BRU-REEL | AD7719BRUZ-REEL |
|---|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 28-TSSOP (RU) | 28-TSSOP (RU) | 28-TSSOP (RU) | 28-TSSOP (RU) | 28-TSSOP (RU) | 28-TSSOP (RU) | 28-TSSOP (RU) |
| Resolution | 24 bits | 24 bits | 24 bits | 24 bits | 16 bits | 16 bits | 24 bits |
| Number of Channels | 8 (4 diff / 8 SE) | 8 (4 diff / 8 SE) | 8 (4 diff / 8 SE) | 8 (4 diff / 8 SE) | 1 differential / 2 SE | 8/10 single-ended | 3 differential / 5 SE |
| Maximum Output Data Rate | 8.5 kHz | 8.5 kHz | 8.5 kHz | 8.5 kHz | ~1 kHz (lower bandwidth) | ~1.4 kHz | ~1.5 kHz |
| Conversion Time (16-bit p-p) | 117 µs | 117 µs | 117 µs | 117 µs | Higher (>1 ms) | ~700 µs | ~650 µs |
| Calibration per Channel | Yes (gain & offset) | Yes (gain & offset) | Yes (gain & offset) | Yes (gain & offset) | Yes | Yes | Yes |
| RoHS Status | Compliant (BRUZ suffix) | Compliant | Compliant | Non-RoHS (BRU suffix) | Compliant | Non-RoHS (BRU suffix) | Compliant |
מבדילים עיקריים
- Higher output throughput than the AD7708 family (לעומתAD7708BRU-REEL)
- More channels than the AD7719 family (לעומתAD7719BRUZ-REEL)
- True 16-bit p-p at 8.5 kHz with 'No Reference' detect (לעומתAD7707BRZ-REEL)
- Pin-compatible same-die reel variants (לעומתAD7738BRUZ)
הערות תכנון
Use separate AVDD and DVDD supplies tied together with an RC/ferrite network close to the IC. Decouple each supply pin with a 10 µF tantalum and a 100 nF ceramic in parallel. For best 24-bit performance, drive DVDD from a low-noise LDO (e.g., ADP7104) since digital switching noise on DVDD can couple through the substrate into AVDD and degrade effective resolution. Estimated: noise rejection improves 10-15 dB when switching DVDD is decoupled vs directly from a noisy rail.
Route the analog input traces as short as possible and keep them well-separated from digital lines (SCLK, DOUT, DIN, CS). Place a guard ring or ground trace around the AIN pins tied to AGND to minimize leakage from the PCB. The differential reference REFIN+/REFIN- traces should be matched in length and bypassed with a 100 nF NPO ceramic right at the pins. Estimated: at 24-bit p-p resolution even 1 nA of leakage into the analog input pin causes measurable gain error.
Do not leave the unused analog input channels floating — connect them to AGND (unipolar mode) or to AVDD/2 (bipolar mode) so that the input modulator bias settles predictably. A floating AIN pin can result in large-scale errors because the internal ESD network leaks charge into the modulator. Per the AD7738 datasheet, the MODE pin must be tied low for serial mode at all times, or the device enters parallel interface mode and pins reassign.
At the fastest 8.5 kHz throughput (117 µs conversion), the channel-switching transient settle is about 70 µs after channel change, so back-to-back channel-to-channel sampling should include a 70-100 µs settle guard in software. The on-chip digital sinc³ filter provides >80 dB of 50/60 Hz rejection only at the lower output rates (≤200 Hz), so high-rate applications must accept mains-coupled noise. For 50/60 Hz rejection at full throughput, decouple the analog signal chain strongly or average in software.
מידע על תאימות
RoHS compliant per Analog Devices product page (BRUZ suffix). Last Time Buy status — see PRODUCT PHASE OUT NOTICE from Analog Devices. Operating temperature range not provided in web data, confirm from datasheet.
