Analog Devices

AD9895KBC - 12-Bit CCD Signal Processor AFE | Analog Devices

MPN: AD9895KBC ✓ פעיל
64-CSPBGA (9 x 9 mm) Package 1 ns Speed
כמות הזמנה מינימלית: 1 |

AD9895KBC סקירה

The Analog Devices AD9895KBC is a highly integrated CCD signal processor for digital still camera applications, combining a complete analog front end and A/D conversion with a programmable timing generator. It is a 12-bit interface IC with logic input and logic output, packaged in a 64-CSPBGA package measuring 9 mm by 9 mm. According to the Analog Devices product page, the AD9895 and AD9891 use a Precision Timing core that provides 1 ns clock-adjustment resolution at 20 MHz operation and 700 ps resolution at 30 MHz operation.

What is a CCD signal processor? A CCD signal processor is an interface and control IC designed to receive analog charge from a charge-coupled device, condition that signal, perform analog-to-digital conversion, and generate the timing required by the image sensor. In the broader electronics hierarchy, it is an interface IC, analog front end, and image-sensor signal-chain component. Combining the analog front end, converter, timing generator, and programmable timing control simplifies the design of digital camera systems compared with separate sensor-interface and timing blocks.

Key features of the AD9895KBC include its 12-bit A/D conversion, programmable gain, ESD protection, logic-level input and output interfaces, and programmable timing generation. The timing core supports fine adjustment of high-speed clocks, with different stated resolution at 20 MHz and 30 MHz operating points. These characteristics make the device relevant to CCD-based imaging systems requiring coordinated sensor timing, signal conversion, and programmable analog control.

The AD9895 architecture is intended for high-speed image-signal acquisition. Its integrated analog front end handles the sensor-side signal path, while the timing generator coordinates the required clock phases and reset levels. The programmable gain function provides an additional degree of control for matching the analog signal to the converter range. For camera designers, the central design consideration is preserving signal integrity across the CCD output, analog input, reference, clock, and digital interface networks while meeting the timing requirements of the target imaging sensor.

Typical applications include digital still cameras, CCD imaging modules, professional camera systems, and embedded vision equipment that uses compatible CCD sensors. The same integration can reduce board area and the number of separately coordinated timing components, although system-level timing, grounding, decoupling, and clock-layout decisions remain essential. The 64-CSPBGA package is compact but uses a fine-pitch land pattern and requires careful PCB assembly and thermal management.

For robust implementation, follow the Analog Devices AD9895 datasheet for the complete pin description, recommended power-supply connections, bypass-capacitor values, clocking limits, and timing-generator configuration. Verify the sensor-specific vertical and horizontal timing sequences, analog input range, reference-voltage requirements, and allowable operating temperature before releasing a production layout.

This page combines the manufacturer product description, exact package and pricing references, verified replacement candidates, and practical integration guidance for engineers evaluating the AD9895KBC in CCD-based imaging equipment.

חלופות תחליף ישיר עבור AD9895KBC — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

AD9895KBCZ

✅ Drop-In
📦 64-CSPBGA (9 x 9 mm)
Same 64-CSPBGA terminals and principal performance characteristics; ordering-code qualification and lifecycle attributes should be checked

📋 חלופה להתייחסות (לא בקטלוג)

AD9895KBCZRL

✅ Drop-In
📦 64-CSPBGA (9 x 9 mm)
Same 64-CSPBGA package and functional replacement characteristics; rolling-tape ordering and qualification details require confirmation

📋 חלופה להתייחסות (לא בקטלוג)

AD9895KBC דירוגים מרביים ומאפיינים חשמליים

Product Type CCD signal processor with integrated analog front end and A/D converter
ADC Resolution 12 bit
Input Interface Logic input
Output Interface Logic output
Programmable Gain Yes
ESD Protection Yes
Timing Generator Fully programmable
Timing Resolution at 20 MHz 1 ns
Timing Resolution at 30 MHz 700 ps
מארז 64-CSPBGA (9 x 9 mm)
מספר פינים 64 pins
Terminal Pitch 0.8 mm
טמפרטורת פעולה -20 °C to +85 °C
סוג הרכבה Surface mount
סטטוס RoHS RoHS

מדריך תצורת פינים של AD9895KBC 64-cspbga (9 x 9 mm)

תצורת פינים עבור AD9895KBC (מארזת 64-cspbga (9 x 9 mm)). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת 64-cspbga (9 x 9 mm) עבור AD9895KBC

אין נתוני פריסת פינים מפורטים עבור AD9895KBC.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

AD9895KBC מתאים עבור 6 יישוםs: Digital Still Camera, CCD Imaging Module, Professional Camera, Industrial Vision Equipment, Security Camera, Machine Vision Camera.

📷

Digital Still Camera

The AD9895KBC fits a digital still camera because it combines the CCD analog front end, 12-bit A/D conversion, programmable gain, ESD protection, and timing generation in one device. According to Analog Devices, the Precision Timing core provides 1 ns adjustment resolution at 20 MHz and 700 ps resolution at 30 MHz, allowing the camera designer to coordinate sensor clocks precisely. The integrated signal chain can reduce board area and simplify coordination between the image sensor and digital imaging pipeline. Designers should still configure the timing generator for the selected CCD, validate all clock phases at operating temperature, and follow the manufacturer bypass-capacitor and layout recommendations.

🧩

CCD Imaging Module

The AD9895KBC is suitable for a compact CCD imaging module where analog capture, conversion, and sensor timing must operate as a coordinated signal chain. Its 12-bit converter and programmable gain provide control over the CCD-derived analog signal, while the integrated timing generator supports precise high-speed clock adjustment. The 64-CSPBGA package can help reduce module area, but its 0.8 mm terminal pitch demands accurate fanout and assembly processes. Confirm the module's analog bandwidth, reference requirements, sensor timing sequence, and power-supply layout against the Analog Devices documentation before releasing hardware.

🎥

Professional Camera

The AD9895KBC is appropriate for a professional imaging system that needs precise CCD timing together with an integrated analog front end. Its programmable timing core, adjustable gain, and 12-bit conversion provide a compact interface between a compatible CCD sensor and subsequent image-processing electronics. The stated operating range of -20 °C to +85 °C covers many industrial and indoor imaging environments, while the 9 mm by 9 mm CSPBGA package supports compact camera electronics. System validation should include sensor timing margin, analog-noise assessment, reference stability, and PCB-level signal-integrity checks.

🏭

Industrial Vision Equipment

The AD9895KBC can serve in industrial vision equipment built around a compatible CCD array and requiring deterministic clock phasing. The integrated A/D converter, programmable gain, and programmable timing generator create a compact sensor-interface block, while the 64-CSPBGA package minimizes the footprint compared with several discrete functions. Its stated -20 °C to +85 °C range is useful for controlled factory environments but should be reviewed for outdoor or temperature-extended installations. Validate clock jitter, analog settling, power rejection, and sensor-specific timing under the final enclosure and power-supply conditions.

🎥

Security Camera

The AD9895KBC is applicable to CCD-based security camera designs that require integrated conversion and programmable sensor timing. The 12-bit analog front end and programmable gain help condition the CCD output, while the timing core permits controlled clock adjustment for stable image acquisition. Integration reduces the number of separate interface functions and can simplify enclosure space inside a compact camera. For continuous operation, verify thermal behavior of the CSPBGA assembly, quality of bypass connections, allowable clock configurations, and the exact CCD timing program before production deployment.

📱

Machine Vision Camera

The AD9895KBC fits a machine vision camera when the selected CCD sensor requires programmable timing and the design benefits from a consolidated analog front end and 12-bit converter. Adjustable timing resolution supports controlled clock phasing, while programmable gain provides an additional calibration dimension for the sensor signal path. The 64-CSPBGA land pattern makes board reuse possible between AD9895KBC and the documented replacement candidates, provided ordering and qualification requirements are satisfied. Production validation should include sensor-to-ADC timing, gain calibration, reference accuracy, and signal-integrity testing across the complete operating temperature range.

סיכום מוצרים מומלצים

AD9895KBCZ Direct-ordering replacement for the same CCD signal-processing function בשימוש ב-: Digital Still Camera, CCD Imaging Module, Professional Camera, Security Camera, Machine Vision Camera AD9895KBCZRL Documented replacement candidate with the same package family בשימוש ב-: Industrial Vision Equipment
What is the AD9895KBC?
The AD9895KBC is an Analog Devices 12-bit CCD signal processor that combines an analog front end, A/D conversion, and a programmable timing generator for digital still camera systems. According to the Analog Devices product page, the device is designed for CCD imaging and includes a Precision Timing core for adjustable high-speed clocks. It is packaged in a 64-CSPBGA package measuring 9 mm by 9 mm.
What are the key specifications of AD9895KBC?
The AD9895KBC combines a 12-bit A/D converter, programmable gain, ESD protection, logic input and logic output interfaces, and a fully programmable timing generator in a 64-CSPBGA package. According to the Analog Devices product page, its Precision Timing core provides 1 ns timing resolution at 20 MHz operation and 700 ps resolution at 30 MHz operation. The stated operating temperature range is -20 °C to +85 °C.
Where can I download the AD9895KBC datasheet PDF?
The AD9895KBC datasheet and product information are available through the official Analog Devices AD9895 product page at https://www.analog.com/en/products/ad9895.html. Use the manufacturer document for the authoritative pin descriptions, electrical characteristics, timing-generator register details, recommended application circuit, PCB requirements, and package drawings. The page is the appropriate starting point for production design and board-layout verification.
Where can I find the AD9895KBC pinout?
The AD9895KBC pinout is identified in the official Analog Devices AD9895 documentation as a 64-CSPBGA package with a 0.8 mm terminal pitch. Use the pin-description table and package drawing in the manufacturer datasheet before assigning PCB nets. A complete 64-pin net list is not reproduced on this page, so production layouts should be checked directly against the Analog Devices package documentation.
What is the difference between AD9895KBC and AD9895KBCZ?
The AD9895KBC and AD9895KBCZ are identified by the cross-reference information as having consistent terminals, packages, and principal performance characteristics, making the KBCZ a direct replacement without modification of the existing circuit. Both are Analog Devices 12-bit CCD signal processors in the 64-CSPBGA package family. The exact ordering-code differences should still be checked against the manufacturer datasheet before a production release.
Can AD9895KBCZ replace AD9895KBC?
Yes, AD9895KBCZ is identified as a drop-in replacement for AD9895KBC because the terminals and packages are consistent and the principal functional and performance characteristics match. The replacement uses the same 64-CSPBGA land pattern and therefore does not require circuit modification. Confirm operating-temperature, qualification, and sourcing requirements before approving the substitution for production.
What is the best drop-in replacement for AD9895KBC?
AD9895KBCZ is the strongest documented drop-in replacement for AD9895KBC because the cross-reference information explicitly states consistent terminals and packages with matching principal performance characteristics. It retains the 64-CSPBGA package used by the target and requires no PCB modification. AD9895KBCZRL is also listed as a replacement candidate, but qualification and order-code details should be confirmed before design approval.
AD9895KBC vs AD9895KBCZ - which is better for a CCD camera?
AD9895KBCZ is generally the better choice for a new design when its current ordering status and sourcing conditions are suitable, because it is explicitly documented as a direct replacement with matching terminals, package, and principal performance characteristics. AD9895KBC remains appropriate for an existing qualified design or an exact ongoing sourcing requirement. Both are 12-bit CCD signal processors with programmable timing and analog front-end functions.
When should I choose AD9895KBC over AD9895KBCZ?
Choose AD9895KBC when maintaining an existing design whose BOM, qualification records, or approved supply chain already specify that exact ordering code. Choose AD9895KBCZ when the manufacturer or an authorized supply channel confirms it as the maintained replacement and the product-level qualification requirements remain satisfied. Because both use the same 64-CSPBGA package, the selection should be driven by ordering status, certification, and procurement continuity rather than PCB rework.
Is AD9895KBC suitable for digital still camera applications?
Yes, AD9895KBC is specifically described by Analog Devices as a highly integrated CCD signal processor for digital still camera applications. It combines a complete analog front end, A/D conversion, a programmable timing generator, programmable gain, and ESD protection. Its 1 ns timing resolution at 20 MHz and 700 ps resolution at 30 MHz support precise timing control in compatible CCD imaging systems.
What can replace AD9895KBC?
AD9895KBCZ can directly replace AD9895KBC because the available cross-reference information states that the package, terminals, and principal performance characteristics are consistent. AD9895KBCZRL is also identified as a replacement candidate for the same Analog Devices device family. Both candidates must be checked for ordering-code, temperature, qualification, and supply requirements before production approval.
Is AD9895KBC the same as AD9895KBCZ?
The AD9895KBC and AD9895KBCZ have the same core device functionality and the same 64-CSPBGA package, and AD9895KBCZ is documented as a complete replacement requiring no circuit modification. They are not necessarily identical in every commercial or qualification attribute, so the ordering-code suffix should still be reviewed against the manufacturer's product records before substitution.
What is the best Analog Devices equivalent for AD9895KBC?
AD9895KBCZ is the best documented Analog Devices equivalent for AD9895KBC in this drop-in comparison. It retains the 64-CSPBGA package, matching terminals, 12-bit CCD signal-processing function, programmable timing architecture, and principal electrical characteristics. No cross-manufacturer equivalent with the same package and verified pin compatibility was established, so an unqualified substitute should not be assumed.
How is the AD9895KBC timing generator used in a camera design?
The AD9895KBC timing generator controls the required clock phases and sensor timing while its analog front end acquires and converts the CCD output signal. According to the Analog Devices product page, the Precision Timing core supports 1 ns resolution at 20 MHz and 700 ps resolution at 30 MHz. A production implementation must program the generator for the selected CCD and validate horizontal and vertical timing at the system level.
Where can I buy AD9895KBC and what is its lead time?
Use the Request a Quote form on this page to ask about AD9895KBC availability, current lead time, minimum order quantity, and volume pricing. The part is shown as available with a stated quantity of 5000 in one catalog listing, but current stock and delivery timing should be confirmed during quotation. The AD9895KBC is also listed for order through its manufacturer product ecosystem.

נתוני עזר הנדסיים עבור AD9895KBC — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose AD9895KBC when the design is tied to an existing approved BOM, qualification record, or exact supplier requirement for that ordering code. It integrates a 12-bit A/D converter, programmable gain, ESD protection, and a programmable CCD timing generator into a 64-CSPBGA package, making it appropriate for digital still cameras, CCD modules, and machine vision equipment. AD9895KBCZ is the preferred replacement candidate when a direct, same-package alternative is required because the documented terminals and principal performance characteristics match. AD9895KBCZRL is another same-package replacement candidate, subject to review of its rolling-tape ordering and qualification details. No cross-manufacturer part was verified as both pin-compatible and parametrically equivalent, so do not approve an unrelated competitor solely from similar catalog specifications. For any substitution, confirm supply status, operating-temperature requirements, lifecycle status, sensor timing, and the manufacturer application circuit before production release.

השוואה עם חלופות

פרמטר מוצר זה AD9895KBCZ AD9895KBCZRL
Brand Analog Devices Analog Devices Analog Devices
Package 64-CSPBGA (9 x 9 mm) 64-CSPBGA (9 x 9 mm) 64-CSPBGA (9 x 9 mm)
Product Type CCD signal processor and generator CCD signal processor and generator CCD signal processor and generator
ADC Resolution 12 bit 12 bit 12 bit
Timing Resolution at 20 MHz 1 ns 1 ns 1 ns
Timing Resolution at 30 MHz 700 ps 700 ps 700 ps
Programmable Gain Yes Yes Yes
Operating Temperature -20 °C to +85 °C -20 °C to +85 °C -20 °C to +85 °C
Terminal Pitch 0.8 mm 0.8 mm 0.8 mm
ESD Protection Yes Yes Yes

מבדילים עיקריים

  • Integrated CCD analog front end, converter, and timing generator (לעומתAD9895KBCZ)
  • Fine high-speed clock adjustment (לעומתAD9895KBCZRL)
  • Compact sensor-interface integration (לעומתAD9895KBCZ)

הערות תכנון

Use the Analog Devices AD9895 package drawing and pin-description table to create the 64-CSPBGA fanout. Keep analog sensor inputs, voltage references, timing outputs, and digital interface nets on controlled routing layers, and avoid routing high-speed digital signals beneath sensitive analog paths. The 0.8 mm terminal pitch makes small assembly registration errors significant, so inspect pad geometry, solder-mask definitions, and stencil apertures before fabrication.

Implement the power network with the decoupling values and placement shown in the manufacturer application information. Place required bypass capacitors immediately adjacent to their associated supply pins and minimize loop area between each capacitor and the device. If multiple supply domains are used, establish their sequencing and ramp behavior with the analog and digital portions of the camera architecture rather than relying on incidental PCB return paths.

Validate the complete CCD-to-ADC signal path with the target sensor rather than treating the converter resolution as a guarantee of usable image fidelity. Check analog bandwidth, source impedance, gain settings, clock edge placement, and sampling aperture against the operating mode. Use the Precision Timing core's 1 ns resolution at 20 MHz and 700 ps resolution at 30 MHz as design controls, then confirm timing margins in simulation and on hardware.

Do not substitute AD9895KBCZ or AD9895KBCZRL solely because they use the same package. Before replacing an existing device, compare ordering-code attributes, operating-temperature requirements, qualification status, production lifecycle, and approved supplier chain. Reconfirm the register map, timing defaults, and pin-level functions against the applicable Analog Devices documentation because package equivalence alone does not complete engineering approval.

מידע על תאימות

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The JLCPCB part listing identifies the AD9895KBC as RoHS. No additional REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was established.

הנתונים אומתו בתאריך: 2026-11-19 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

AD9895KBC datasheet AD9895KBC pinout AD9895KBC datasheet pdf AD9895KBC equivalent AD9895KBC replacement AD9895KBC cross reference AD9895KBC vs AD9895KBCZ AD9895KBC price AD9895KBC stock Analog Devices AD9895KBC AD9895KBC 64 CSPBGA AD9895KBC digital still camera AD9895KBC application circuit AD9895KBC timing generator AD9895KBC programmable gain

רכיבים ומונחים קשורים

Analog Devices AD9895KBC AD9895KBCZ AD9895KBCZRL AD9895 CCD signal processor analog front end AFE interface IC A/D converter 12-bit ADC programmable gain programmable timing generator Precision Timing core digital still camera CCD image sensor machine vision industrial vision ESD protection logic input logic output 64-CSPBGA BGA package family surface mount SMD
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר