ADF4360-3BCP - 1.95GHz Integer-N PLL | Analog Devices
MPN: ADF4360-3BCP ✓ פעילADF4360-3BCP סקירה
An integer-N PLL frequency synthesizer combines a phase-locked loop, frequency divider, reference input, and VCO to produce a stable programmable RF output. The ADF4360-3 family supports a divide-by-2 operating mode that provides an RF output from 800 MHz to 975 MHz, making the device useful where either a fundamental high-frequency output or a divided lower-frequency output is required.
Key features include the 1750 MHz nominal center frequency, operation up to 1.95 GHz, and an integrated VCO that reduces the number of external high-frequency components required in a synthesizer design. The 24-WFQFN exposed-pad package supports compact RF layouts, while its exposed thermal pad provides a path for heat transfer through the PCB. The industrial-grade component is identified as a no-lead, 24-terminal square package.
The ADF4360-3 architecture separates synthesis into an integer feedback divider and programmable VCO within one integrated circuit. Its divided output broadens application flexibility without requiring a second synthesizer for the 800 MHz to 975 MHz range. The divide-by-2 function is specifically called out by Analog Devices for the ADF4360-3, making that operating mode the key engineering distinction within the broader ADF4360 family.
Typical uses include cellular and baseband RF systems, local oscillators, wireless infrastructure, instrumentation, and frequency-generation modules. A designer can select the output frequency through the synthesizer programming interface and use the reference and feedback paths to establish phase lock. The integrated VCO is particularly useful when board area, component count, and repeatable RF performance are more important than the flexibility of a discrete VCO implementation.
PCB implementation requires careful treatment of the reference, feedback, supply, and RF output paths. Keep the exposed pad connected to a low-impedance ground plane and follow the manufacturer's pin-description table and reference-layout guidance when assigning tracks. Validate loop-filter component values, reference-divider settings, and output power for the intended channel plan before releasing a production layout.
This product page consolidates the ADF4360-3 frequency ranges, package details, application guidance, comparison information, and sourcing workflow into one engineering-focused reference. It also distinguishes exact drop-in alternatives from related family members whose tuning ranges or MPN suffixes serve different design requirements.
חלופות תחליף ישיר עבור ADF4360-3BCP — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם ADF4360-3BCP (אותו גורם צורה וטביעת רגל) — שונים ב Divide-by-2 RF Output Range, Package.
ADF4360-3BCPZ
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
ADF4360-3BCP מפרטים
| Product Type | Integer-N frequency synthesizer with integrated voltage-controlled oscillator |
| Designed Center Frequency | 1750 MHz |
| Maximum Operating Frequency | 1.95 GHz |
| Divide-by-2 RF Output Range | 800 MHz to 975 MHz |
| Synthesizer Architecture | Integer-N PLL |
| VCO Integration | Fully integrated voltage-controlled oscillator |
| Reference Input Logic | CMOS |
| סוג פלט | Clock output |
| Frequency Divider | Selectable divider or multiplier function |
| מארז | 24-WFQFN exposed-pad CSP, 4 mm x 4 mm |
| Terminal Count | 24 terminals |
| Mounting Form | No-lead surface mount |
| Temperature Grade | Industrial grade |
מדריך תצורת פינים של ADF4360-3BCP 24-wfqfn exposed-pad csp, 4 mm x 4 mm
תצורת פינים עבור ADF4360-3BCP (מארזת 24-wfqfn exposed-pad csp, 4 mm x 4 mm). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.
אין נתוני פריסת פינים מפורטים עבור ADF4360-3BCP.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
ADF4360-3BCP מתאים עבור 6 יישוםs: Cellular RF Local Oscillator, Baseband Frequency Generation, Wireless Infrastructure RF Module, Instrumentation and Test Equipment, Low-Band Divided RF Output, Compact RF Synthesizer Subcircuit.
Cellular RF Local Oscillator
The ADF4360-3BCP fits cellular RF systems requiring a programmable local oscillator near the ADF4360-3 center frequency of 1750 MHz. Its fully integrated integer-N synthesizer and VCO consolidate the phase detector, divider, oscillator, and associated functions into one device, reducing the number of high-frequency components on the RF board. Operation up to 1.95 GHz supports the upper part of the device's specified range, while the divide-by-2 output covering 800 MHz to 975 MHz provides additional channel options. The 24-WFQFN exposed-pad package also helps keep the implementation compact, although correct grounding and RF trace control remain essential for predictable phase noise and output behavior.
מומלץ
Baseband Frequency Generation
ADF4360-3BCP can generate a programmable RF reference for baseband processing chains that require a stable carrier or local-oscillator source. The integrated VCO supports a design centered on 1750 MHz, and the integer-N architecture allows channel placement through programmable divider and reference-path settings. For systems operating below the fundamental band, the documented divide-by-2 mode produces 800 MHz to 975 MHz. A compact 4 mm by 4 mm 24-WFQFN package helps reduce board area, but engineers should calculate loop-filter values for the selected reference and division ratio, then confirm lock range and phase-noise performance on the assembled board.
מומלץ
Wireless Infrastructure RF Module
The ADF4360-3BCP is appropriate for wireless infrastructure modules that require a compact, programmable RF source within the ADF4360-3 operating band. Its 1750 MHz designed center frequency and 1.95 GHz maximum operating frequency cover equipment intended for that portion of the RF spectrum. Integrating the VCO with the integer-N synthesizer reduces the assembly burden associated with separate oscillator and divider arrangements. The exposed-pad package requires a deliberate thermal and ground-plane layout, while the reference and feedback paths need controlled routing to prevent degradation of phase noise and lock performance. Final qualification should include temperature, supply sensitivity, channel-plan, and output-power testing.
מומלץ
Instrumentation and Test Equipment
ADF4360-3BCP can serve as the programmable RF source inside instrumentation requiring a deterministic local oscillator. Its operation to 1.95 GHz makes it suitable for instruments whose translated or generated signals fall within the ADF4360-3 range, while the divide-by-2 mode adds an 800 MHz to 975 MHz option for lower-frequency test points. The fully integrated VCO reduces the need for discrete frequency-generation hardware, although reference phase noise, loop bandwidth, and output-buffer settings directly influence the quality of the generated signal. Designers should use the manufacturer application information to select loop-filter values and preserve short, controlled RF paths.
מומלץ
Low-Band Divided RF Output
The ADF4360-3BCP supports a distinct divided-output mode that delivers an RF signal from 800 MHz to 975 MHz. This feature allows a system to reuse the integrated synthesizer for lower-frequency conversion or signal-generation needs without moving immediately to a different PLL family. The document's 1750 MHz designed center frequency remains central to the VCO architecture, so the frequency plan should account for the relationship between the fundamental tuning range and the divided output. In implementation, verify divider configuration, lock behavior, reference ratio, and RF-output routing against the Analog Devices datasheet before integrating the device into a production frequency plan.
מומלץ
Compact RF Synthesizer Subcircuit
ADF4360-3BCP is useful when a board requires a high-frequency synthesizer in a compact surface-mount footprint. The 24-terminal WFQFN package measures 4 mm by 4 mm and includes an exposed pad, allowing a compact placement while providing a direct route for heat transfer through the PCB. Its integrated integer-N synthesizer and VCO eliminate a separate VCO, divider, and phase-detector arrangement from the BOM. The trade-off is careful RF implementation: the exposed pad must be tied to the ground structure as directed, and the reference, feedback, and output paths must follow the manufacturer's layout guidance to preserve synthesizer performance.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור ADF4360-3BCP — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | ADF4360-3BCPZ | ADF4360-1BCP | ADF4360-7BCPZ |
|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Product Architecture | Integer-N synthesizer with integrated VCO | Integer-N synthesizer with integrated VCO | Integer-N synthesizer with integrated VCO | Integer-N synthesizer with integrated VCO |
מבדילים עיקריים
- Closely related same-frequency ordering option (לעומתADF4360-3BCPZ)
- Integrated VCO reduces separate RF component count (לעומתADF4360-1BCP)
- Selected tuning band distinguishes it from the higher-frequency family (לעומתADF4360-7BCPZ)
הערות תכנון
Use the Analog Devices reference-layout and pin-description guidance when assigning the 24-WFQFN terminals. Place the input, output, and loop-filter connections close to their intended IC pins, preserve continuous ground references beneath the device, and connect the exposed pad to a low-impedance ground plane. Keep the RF output path short and controlled, and avoid routing high-current or switching-node copper beneath sensitive reference and feedback traces.
Treat the reference and feedback paths as RF-sensitive rather than ordinary digital interconnects. Use short routes, continuous return planes, and symmetrical placement where practical to minimize parasitic inductance and sensitivity to radiated interference. The synthesizer's lock range and phase-noise performance depend on the complete loop, including PCB parasitics, so validate the assembled board with the intended reference frequency, divider settings, supply conditions, and output channel plan.
The exposed thermal pad is an integral part of the 24-WFQFN package and must be connected to the PCB ground structure according to the manufacturer layout instructions. Provide adequate exposed copper and thermal-via density to transfer heat without disturbing RF return paths. Avoid placing a thermally isolated keepout beneath the pad, since it can increase junction temperature and reduce the margin available for sustained RF operation.
מידע על תאימות
Compliance status requires confirmation for the exact ADF4360-3BCP ordering code. The related ADF4360-3BCPZ suffix indicates a lead-finish configuration, but that does not establish the full compliance profile of ADF4360-3BCP.