ADF4360-8BCPRL - 65-400 MHz Integer-N VCO | Analog Devices
MPN: ADF4360-8BCPRL ✓ פעילADF4360-8BCPRL סקירה
An integer-N frequency synthesizer is a phase-locked-loop-based clock and RF signal generator that produces an output frequency selected through integer division of a reference clock. The ADF4360-8 belongs to the frequency synthesizer, clock generator, and RF signal-chain hierarchy. Its external-inductor VCO core allows the center frequency to be established with external components rather than a fixed on-chip resonator.
The device operates from 3 V to 3.6 V and supports 1.8 V-compatible serial-interface logic. Key features include programmable output power, a three-wire serial interface, digital lock detect, and hardware and software power-down modes. These controls support orderly clock management in RF test equipment, cellular infrastructure, telemetry systems, and other frequency-generation equipment.
The integrated architecture reduces the number of external frequency-generation components while retaining direct digital control of the synthesizer. External inductors determine the 65 MHz to 400 MHz operating band, while the integer-N divider establishes the output relationship to the reference frequency. The exposed thermal pad provides the primary heat-spreading path from the 24-lead LFCSP package.
Typical uses include cellular baseband and RF test systems, local oscillator generation, wireless transceiver subsystems, and instrumentation requiring programmable RF outputs. The device is particularly suitable where a compact synthesizer with an integrated VCO is preferable to a PLL and separate VCO assembly.
Use the manufacturer pin-description table when assigning PCB tracks, and connect the exposed pad to the appropriate ground-plane structure. Follow the recommended decoupling and external-inductor layout because the PLL/VCO loop can be affected by supply impedance and high-frequency grounding quality.
חלופות תחליף ישיר עבור ADF4360-8BCPRL — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם ADF4360-8BCPRL (אותו גורם צורה וטביעת רגל) — שונים ב Device Type, Package, Serial Interface, VCO Frequency Setting.
ADF4360-8BCPZRL
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←ADF4360-8BCPZRL7
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
ADF4360-7BCPZRL7
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
ADF4360-8BCPRL מפרטים
| Device Type | Integrated integer-N frequency synthesizer and VCO |
| Output Frequency Range | 65 MHz to 400 MHz |
| Maximum Stated Frequency | 400 MHz |
| Minimum Stated Frequency | 65 MHz |
| מתח אספקה | 3 V to 3.6 V |
| Nominal Power Supply | 3.6 V |
| Logic Compatibility | 1.8 V compatible |
| Frequency Synthesis Architecture | Integer-N |
| Serial Interface | 3-wire serial interface |
| Output Power | Programmable |
| Lock Detect | Digital lock detect |
| Power-Down Modes | Hardware and software power-down |
| מארז | 24-lead LFCSP-24, 4 x 4 mm, exposed pad |
| סוג הרכבה | Surface mount |
| VCO Frequency Setting | External inductors |
מדריך תצורת פינים של ADF4360-8BCPRL 24-lead lfcsp-24, 4 x 4 mm, exposed pad
תצורת פינים עבור ADF4360-8BCPRL (מארזת 24-lead lfcsp-24, 4 x 4 mm, exposed pad). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.
אין נתוני פריסת פינים מפורטים עבור ADF4360-8BCPRL.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
ADF4360-8BCPRL מתאים עבור 6 יישוםs: Cellular RF Test Equipment, Wireless Transceiver Local Oscillator, Telemetry and Remote-Sensing RF, RF Signal Generators, Industrial RF Control Modules, Clocked RF Calibration Systems.
Cellular RF Test Equipment
The ADF4360-8BCPRL fits programmable RF-clock and local-oscillator generation in cellular test equipment because it combines an integer-N PLL with a VCO covering 65 MHz to 400 MHz. The synthesizer can generate the required test tone from a stable reference while retaining digital control over divider settings and output power. Its three-wire serial interface simplifies automated equipment control, and the digital lock-detect output provides a hardware indication that frequency acquisition is complete. The 4 x 4 mm LFCSP-24 footprint also supports compact instrument RF sections without requiring a separate VCO assembly.
מומלץ
Wireless Transceiver Local Oscillator
The ADF4360-8BCPRL can supply a programmable local-oscillator signal in wireless transceiver subsystems operating within 65 MHz to 400 MHz. Integrating the PLL, integer-N divider, and VCO reduces component count and provides a direct digital path for changing output frequency. Programmable output power allows the RF output to be matched to downstream circuitry, while lock detect supports reliable state management. The 1.8 V-compatible control interface and compact exposed-pad package are useful in radio modules where board area, supply headroom, and control simplicity are important constraints.
מומלץ
Telemetry and Remote-Sensing RF
The ADF4360-8BCPRL fits telemetry links that require an adjustable RF reference or carrier within the 65 MHz to 400 MHz range. The integer-N architecture provides repeatable frequency relationships to a reference source, and the integrated VCO removes the need for a discrete resonator. Hardware and software power-down functions allow the synthesizer to remain inactive when no transmission is required, helping conserve system power. The three-wire interface can share a control bus with other telemetry electronics, and the compact package helps meet size constraints in field-mounted or portable sensing equipment.
מומלץ
RF Signal Generators
The ADF4360-8BCPRL is suitable for the RF oscillator section of compact signal generators because it combines programmable frequency synthesis with an integrated VCO. Its 65 MHz to 400 MHz range covers a useful portion of test and measurement equipment, and the digital control interface enables automated sweep control. Adjustable output power provides flexibility when driving amplifiers, mixers, or receiver front ends, while the lock-detect signal can coordinate measurement sequencing. The exposed-pad LFCSP package must be connected to an appropriate thermal and ground structure to support reliable operation.
מומלץ
Industrial RF Control Modules
The ADF4360-8BCPRL can generate a controlled RF signal for industrial RF-control, identification, and monitoring modules operating in the 65 MHz to 400 MHz band. Integrating the VCO and integer-N divider reduces the number of discrete frequency-generation components, while the serial interface permits centralized configuration and status monitoring. Programmable output power helps accommodate different antenna and cable environments, and power-down control supports duty-cycled operation. The 3 V to 3.6 V supply requirement must be reconciled with the rest of the module, including sequencing and 1.8 V-compatible interface levels.
מומלץ
Clocked RF Calibration Systems
The ADF4360-8BCPRL is appropriate for calibration systems that synthesize precise, digitally selectable RF frequencies between 65 MHz and 400 MHz. The integer-N divider establishes frequency relationships to the calibration reference, while programmable output power supports repeatable measurements across different test paths. Lock detect allows the controller to pause until the synthesizer is stable before beginning a measurement. The compact LFCSP-24 package preserves board area in multi-channel calibration fixtures, but each device still requires correct external inductors, decoupling, and a low-impedance ground-plane design to achieve intended phase-noise and lock performance.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור ADF4360-8BCPRL — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | ADF4360-8BCPZRL | ADF4360-8BCPZRL7 | ADF4360-7BCPZRL7 |
|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | LFCSP-24, 4 x 4 mm, exposed pad | 24-WFQFN exposed-pad CSP, 4 x 4 mm | 24-WFQFN exposed-pad CSP, 4 x 4 mm | 24-lead package family, 4 x 4 mm |
| Product Family | ADF4360-8 | ADF4360-8 | ADF4360-8 | ADF4360-7 |
מבדילים עיקריים
- ADF4360-8 frequency band coverage (לעומתADF4360-7BCPZRL7)
- Closest ADF4360-8 family option (לעומתADF4360-8BCPZRL)
- Single-chip frequency generation (לעומתADF4360-8BCPZRL7)
הערות תכנון
Route the supply, ground, serial-interface, and external-inductor connections exactly as shown in the Analog Devices ADF4360-8 evaluation-board layout. Keep the VCO inductor and associated loop area compact, provide a low-impedance ground return, and place input and output decoupling capacitors close to their relevant pins. The exposed pad should connect to the recommended ground-plane structure with short thermal-via paths so the PLL and VCO maintain predictable RF behavior.
Do not substitute an ADF4360-7 member merely because it uses a similar 24-lead exposed-pad package. The ADF4360-8 operates across 65 MHz to 400 MHz, while the ADF4360-7 belongs to a different frequency band. Confirm the complete external-inductor calculation, frequency limits, register map, and RF output requirements before using the lower-band alternative. Likewise, verify the exact ordering suffix when moving between ADF4360-8BCPRL and ADF4360-8BCPZRL variants.
Separate the synthesizer's supply routing from noisy switching-converter paths where possible. Use the manufacturer-specified bypass capacitors at the supply pins and keep the exposed pad connected to a low-impedance thermal and ground structure. The ADF4360-8BCPRL accepts a 3 V to 3.6 V supply and 1.8 V-compatible logic, so verify that the supply ramps and interface levels remain within the limits defined by the manufacturer datasheet.
Treat the VCO output and feedback paths as controlled RF connections, even when the synthesized frequency is relatively low. Minimize discontinuities, keep the inductor orientation consistent with the reference layout, and keep digital control traces away from sensitive RF nodes. After lock is detected, evaluate phase noise and output stability across temperature and supply variation because nominal frequency accuracy alone does not establish adequate RF performance for a communications signal chain.
מידע על תאימות
Compliance status was not stated in the manufacturer product information or other cited listings. The ADF4360-7 comparison reference mentions RoHS and REACH, but it does not provide a definitive status for the target MPN.