ADS7813U - 16-Bit SAR ADC, 20 µs, 5V | Texas Instruments
MPN: ADS7813U ✓ פעילADS7813U סקירה
A sampling ADC is a data-conversion device that acquires an analog voltage with a sample-and-hold circuit and converts it into a digital value through successive approximation. The ADS7813 belongs to the SAR ADC hierarchy, where the conversion register compares the sampled input against a trial DAC value. This architecture is appropriate for instrumentation and industrial systems requiring deterministic conversion timing, serial output, and moderate conversion speed without a continuous clock.
The ADS7813 integrates a complete 16-bit capacitor-based SAR converter, sample-and-hold circuitry, clock, reference, and serial interface. Its maximum conversion time is 20 µs, while its serial interface supports straightforward communication with embedded processors. Configurable input ranges provide flexibility for bipolar instrumentation signals and single-ended industrial sensor outputs, reducing the need for external range-switching hardware.
Operation from a single +5 V supply simplifies system power architecture, and the low-power design supports battery-instrumented and space-constrained equipment. The converter is available in a 16-pin SOIC package, identified by TI ordering code DW, with an operating temperature range of −40 °C to +85 °C. Its 16-bit resolution provides 65,536 nominal code levels, making it useful for measurements requiring more precision than a typical 12-bit converter.
Typical uses include industrial process measurement, laboratory data acquisition, sensor-interface modules, panel instrumentation, and embedded control systems. The serial interface helps reduce connection count, while selectable input ranges support bipolar sensor conditioning and unipolar transducer outputs. System designers must still account for input bandwidth, reference accuracy, source impedance, digital-interface timing, and analog noise when establishing achievable measurement precision.
A practical design consideration is that the nominal 16-bit resolution does not guarantee 16-bit absolute accuracy. Reference-voltage error, offset, gain error, comparator behavior, input-source impedance, and PCB noise can reduce end-to-end accuracy. The manufacturer datasheet should be used to select grounding, decoupling, reference-capacitor, and analog-layout arrangements for the selected input range.
This page consolidates verified manufacturer and distributor information, explicitly identified package and lifecycle details, practical ADI signal-chain companions, drop-in alternatives, and engineering guidance that are not presented as a substitute for the complete manufacturer datasheet. Pricing shown here reflects the verified distributor observation as of 2026-10-29.
חלופות תחליף ישיר עבור ADS7813U — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם ADS7813U (אותו גורם צורה וטביעת רגל) — שונים ב Package, Architecture, Mounting Type, Resolution, Input Type.
ADS7813UB/1K
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←ADS7813UE4
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
ADS7813PG4
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←ADS7809U
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←ADS8509IDW
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
ADS7813U דירוגים מרביים ומאפיינים חשמליים
| ADC Type | Successive Approximation Register (SAR) |
| רזולוציה | 16 bit |
| Number of Analog Inputs | 1 input |
| Architecture | Capacitor-based 16-bit SAR A/D |
| Maximum Conversion Time | 20 µs maximum |
| מתח אספקה | +5 V single supply |
| Input Type | Bipolar and unipolar |
| Supported Input Range | ±10 V, ±5 V, 0 V to 10 V, or 0.5 V to 4.5 V |
| Additional Input Range | 0.3 V to 2.8 V high-impedance input range |
| Output Interface | Serial interface |
| Interface Compatibility | SPI-compatible serial output with daisy-chain (TAG) capability |
| Internal Functions | Sample-and-hold, clock, reference, and serial data interface |
| Reference Configuration | Internal or external reference |
| טווח טמפרטורת פעולה | −40 °C to +85 °C |
| מארז | 16-pin SOIC, DW package |
| סוג הרכבה | Surface mount |
| RoHS Compliance | Compliant |
| REACH Compliance | Compliant |
| PFAS Status | No |
| Conflict Minerals | DRC Conflict Free |
מדריך תצורת פינים של ADS7813U 16-pin soic, dw package
תצורת פינים עבור ADS7813U (מארזת 16-pin soic, dw package). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.
אין נתוני פריסת פינים מפורטים עבור ADS7813U.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
ADS7813U מתאים עבור 6 יישוםs: Industrial Process Measurement, Laboratory Data Acquisition, Precision Sensor Signal Conditioning, Battery-Powered Field Instruments, Panel Meter and Monitoring Equipment, Embedded Control Signal Acquisition.
Industrial Process Measurement
The ADS7813U fits industrial process measurement because its 16-bit SAR architecture and maximum 20 µs conversion time provide a useful balance between resolution and acquisition speed. According to the Texas Instruments manufacturer datasheet, the converter can measure bipolar ±10 V or ±5 V inputs as well as unipolar 0–10 V and 0.5–4.5 V signals. Place the ADC behind an input-protection and scaling network, then use its serial output to digitize pressure, temperature, or level transmitter outputs. The −40 °C to +85 °C operating range supports many industrial ambient conditions, although actual accuracy depends on the external reference, conditioning circuit, grounding, and calibration.
Laboratory Data Acquisition
The ADS7813U is suitable for laboratory data-acquisition front ends that need 16-bit numerical resolution without a high-speed flash converter. The Texas Instruments datasheet specifies a 20 µs maximum conversion time and a serial interface, allowing a controller to retrieve each conversion result over a compact connection. Select the ±5 V, ±10 V, or 0.5–4.5 V range to match the instrument's signal source, and apply calibrated attenuation when operating above the selected input span. Because no sampling-rate figure was supplied in the verified data, acquisition software should base its timing on the confirmed 20 µs maximum conversion time and validate the complete clock, settling, and data-transfer sequence.
Precision Sensor Signal Conditioning
The ADS7813U can digitize low-level sensor outputs while preserving 16-bit nominal resolution and offering a documented 0.3 V to 2.8 V high-impedance input range. According to the Texas Instruments ADS7813 manufacturer information, this additional range supports low-level transducer outputs when the surrounding circuit can preserve signal integrity. Use a low-noise reference, controlled sensor excitation, and an appropriate anti-alias filter ahead of the ADC. Source impedance and settling requirements must be checked in the datasheet because the nominal code count alone does not establish practical accuracy. The serial interface also reduces the number of interconnects compared with a parallel ADC.
Battery-Powered Field Instruments
The ADS7813U suits compact field instruments because it is described by Texas Instruments as a low-power, single +5 V SAR converter with a maximum conversion time of 20 µs. The 16-pin SOIC package supports conventional surface-mount assembly, while the serial interface limits PCB routing and connector demand. Battery-operated equipment can power the analog section from the same +5 V rail as appropriate digital circuitry, provided each subsystem's current budget and regulator efficiency are verified. Because the verified data does not provide quiescent current or standby-mode consumption, a battery-life calculation must use the manufacturer datasheet rather than infer power consumption from the conversion-time rating.
Panel Meter and Monitoring Equipment
The ADS7813U is appropriate for digital panel meters and monitoring equipment that convert analog process or sensor signals into stable numeric readings. Its 16-bit resolution, selectable unipolar ranges, and configurable bipolar ranges allow one converter architecture to serve several signal levels. The serial data interface reduces the number of traces between the ADC and display or controller hardware, which is valuable in compact panels. For reliable measurements, route the analog input away from switching supplies and digital clocks, provide local supply bypassing, and use a stable reference. The published −40 °C to +85 °C range supports many enclosure environments, but the final product still requires system-level EMC and temperature validation.
Embedded Control Signal Acquisition
The ADS7813U can serve as the analog acquisition element in an embedded control system that monitors slower process variables while a microcontroller or other controller performs regulation. The 20 µs maximum conversion time permits reasonably prompt measurements, and the serial interface is practical for connecting the converter to embedded processors. Select the range that provides useful signal headroom without unnecessarily amplifying noise. A software state machine should account for conversion completion, data transfer, reference settling, and any multiplexing in the analog front end. The 16-bit nominal result should also be filtered or calibrated in software when the application requires repeatable measurements rather than simply the converter's full code range.
נתוני עזר הנדסיים עבור ADS7813U — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | ADS7813UB | ADS7813UE4 | ADS7813P | ADS7809U | ADS8509IDW |
|---|---|---|---|---|---|---|
| Package | 16-pin SOIC (DW) | 16-pin SOIC (DW) - same | 16-pin SOIC (DW) - same | 16-pin SOIC (DW) - same | 16-pin SOIC (DW) - same | 16-pin SOIC (DW) - same |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
מבדילים עיקריים
- Broader verified input-range selection (לעומתADS7809U)
- Confirmed maximum conversion time (לעומתADS8509IDW)
- Direct ADS7813-family ordering compatibility (לעומתADS7813P)
הערות תכנון
Route the analog input as a short, quiet trace directly from the conditioning network to the ADC and keep it away from switching-regulator outputs, digital clock lines, and high-current return paths. According to the Texas Instruments ADS7813 family information, the converter includes a sample-and-hold stage; nevertheless, PCB leakage, parasitic pickup, and input-network impedance can still perturb a 16-bit measurement. Use a continuous ground plane, quiet analog ground connections where appropriate, and place any input filter close to the ADC pins.
Provide local bypass capacitance at the +5 V supply pins and use the reference components and capacitor values specified in the manufacturer datasheet. Do not substitute guessed reference-capacitor values because reference settling affects conversion accuracy. The verified information establishes single +5 V operation but does not provide the complete recommended capacitor list, quiescent current, or supply ripple sensitivity. Those values must therefore be obtained from the Rev. C manufacturer datasheet before releasing the power tree.
Do not assume that a 16-bit output always provides 16 bits of useful measurement accuracy. Reference-voltage error, offset, gain error, integral nonlinearity, input noise, and source-impedance settling can reduce practical precision. When replacing ADS7813U with ADS7813UB, ADS7813UE4, ADS7813P, ADS7809U, or ADS8509IDW, verify the input range, acquisition time, conversion timing, interface polarity, and software conversion routine. Pin compatibility alone does not prove timing or measurement equivalence.
Treat the serial interface as a digital signal-integrity path and verify data setup, hold, conversion-complete, and clock timing against the selected operating mode. The verified sources describe an SPI-compatible serial output and TAG daisy-chain capability but do not include complete timing diagrams. For long traces or noisy environments, use controlled-impedance routing where appropriate, keep return paths continuous, and avoid sharing switching-node copper with the ADC reference and analog input.
מידע על תאימות
The verified Abacus listing identifies ADS7813U as EU RoHS compliant, REACH compliant, PFAS-free, and DRC Conflict Free. No verified evidence was supplied for AEC-Q100, lead-free, or halogen-free status. The Rev. C designation appears in the verified Texas Instruments part-details snippet; no page count was asserted from the third-party PDF listing.
