ADS7835E - 12-Bit, 500 kSPS Low-Power SAR ADC | Texas Instruments
MPN: ADS7835E ✓ פעילADS7835E סקירה
An SAR ADC is a sampling ADC type that converts an analog input to a digital code by successive comparison against an internal DAC, one bit per clock cycle. As a sampling ADC, it applies a sample-and-hold stage to the analog input before conversion. In the broader hierarchy the ADS7835E is a data converter -> ADC -> sampling ADC -> SAR ADC -> semiconductor, and it sits alongside voltage references, interface ICs and power management ICs in a typical industrial or instrumentation signal chain.
Key features of the ADS7835E include a 500 kSPS throughput rate, on-chip 2.5 V reference, low power dissipation of 17.5 mW, single +5 V supply operation, and a serial interface that simplifies connection to microcontrollers and DSPs. The converter is guaranteed no-missing-codes, which simplifies gain calibration and guarantees monotonic transfer behaviour for closed-loop control and instrumentation use. The -40 °C to +85 °C temperature range covers industrial and commercial environments.
Architecturally the device pairs a SAR conversion core with an internal sample-and-hold amplifier, a charge-based DAC array, and a reference buffer. Because the reference is internal, no external reference component or reference bypass network is required, which reduces board area. The digital interface exposes chip select (CS), serial clock (SCLK), serial data, and a sync/frame signal, allowing the converter to be daisy-chained with other serial peripherals on a shared bus.
Typical applications include industrial process-control and sensor readout, portable battery-powered measurement instruments, low-cost data acquisition modules, and embedded control systems that need faster conversion than a low-speed sigma-delta ADC while keeping power low. The 500 kSPS rate suits vibration and monitoring loops sampled at audio or ultrasonic bandwidths.
A key design consideration is decoupling: place a supply bypass capacitor close to the AVDD pin and route the analog and digital ground pins to a clean ground plane. Because the reference is internal, calibrate for gain accuracy at system level rather than adding a precision external reference.
This page combines manufacturer specifications, ordering-code and drop-in alternatives, package details and practical design notes so engineers can qualify the ADS7835E quickly, compare it against equivalent converters, and place a procurement request from the same page.
חלופות תחליף ישיר עבור ADS7835E — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם ADS7835E (אותו גורם צורה וטביעת רגל) — שונים ב Architecture, Digital Interface, Operating Temperature Range, Resolution, Supply Voltage.
ADS7835EB/2K5G4
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←ADS7835EB/250
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
ADS7835E/250
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
ADS7835E/2K5
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
ADS7835E/2K5G4
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
ADS7835E דירוגים מרביים ומאפיינים חשמליים
| רזולוציה | 12 bit |
| Conversion Throughput Rate | 500 kSPS |
| Architecture | Successive approximation (SAR), sampling ADC with sample-and-hold |
| Number of Inputs | 1 single-ended input |
| Internal Reference | 2.5 V |
| מתח אספקה | Single +5 V operation |
| Power Dissipation | 17.5 mW |
| Digital Interface | Serial (CS, SCLK, serial data, sync) |
| מארז | 8-pin VSSOP (DBV) |
| טווח טמפרטורת פעולה | -40 °C to +85 °C |
| Missing Code Performance | Guaranteed no missing codes |
| External Reference Requirement | None - internal 2.5 V reference |
| סוג הרכבה | Surface mount |
תצורת פינים של ADS7835E
| פין 1 | AVDD — Analog supply voltage |
| פין 2 | AGND — Analog ground |
| פין 3 | DGND — Digital ground |
| פין 4 | AIN — Analog input, single-ended |
| פין 5 | REF — Internal 2.5 V reference output |
| פין 6 | CS — Active-low chip select / frame signal |
| פין 7 | SCLK — Serial clock input |
| פין 8 | SYNC — Serial data input/output |
יישומים טיפוסיים
ADS7835E מתאים עבור 6 יישוםs: Industrial Sensor Readout and Process Monitoring, Battery-Powered Portable Measurement Instruments, Vibration and Condition Monitoring, Embedded Control and Data Acquisition Modules, Audio and Ultrasonic Signal Front Ends, Low-Cost Data Loggers and Educational Bench Equipment.
Industrial Sensor Readout and Process Monitoring
The ADS7835E suits plant-floor instrumentation that has to digitize a transducer signal quickly without a costly multi-channel converter. With a 500 kSPS throughput and a -40 °C to +85 °C operating range, it handles thermocouple, bridge and pressure inputs while staying inside the 8-pin VSSOP footprint that keeps the analog board small. The internal 2.5 V reference removes the need for a separate reference IC and its bypass network, and the guaranteed no-missing-codes behaviour simplifies calibration of the downstream gain stage. Because the device is a single-ended SAR part, place a small RC anti-alias filter ahead of the AIN pin and route it away from the SCLK trace.
מומלץ
Battery-Powered Portable Measurement Instruments
Handheld meters, field loggers and portable analyzers benefit from a converter that draws very little power and needs only one supply rail. The ADS7835E dissipates 17.5 mW while running from a single +5 V supply, and its 8-pin VSSOP package leaves board area for the display and keypad. Duty-cycled acquisition is straightforward: hold chip select inactive between readings and the host reads each result over the serial interface when a sample is needed. The internal 2.5 V reference simplifies the power tree by removing a precision reference rail, at the cost of absolute accuracy, which is usually recovered with a one-point gain calibration in firmware.
מומלץ
Vibration and Condition Monitoring
Condition monitoring of rotating machinery needs enough sample rate to capture high-order vibration content while remaining low cost per channel. The 500 kSPS throughput of the ADS7835E samples far beyond the audio band, so it can serve as a front end for accelerometer and velocity-sensor signals in a compact sensor node. Its 12-bit resolution gives roughly 4096 codes, which is workable for trend and alarm-threshold monitoring rather than for laboratory-grade spectral analysis. Power dissipation of 17.5 mW helps when nodes are battery or energy-harvesting powered, and the small VSSOP footprint fits densely packed sensor rails.
מומלץ
Embedded Control and Data Acquisition Modules
Compact data acquisition and embedded control modules often need one fast conversion channel plus a microcontroller, and the ADS7835E provides exactly that in eight pins. The serial interface with chip select, serial clock, serial data and sync lets the converter share a bus with other serial peripherals, and the sync signal can frame multi-channel readings across several converters. At 500 kSPS a single channel can be sampled thousands of times per control period, which supports loop feedback in pump, valve or thermal control products. Route the analog input away from the serial clock and digital return paths to keep sample-and-hold noise low.
מומלץ
Audio and Ultrasonic Signal Front Ends
The 500 kSPS rate places the ADS7835E well above the 20 kHz audio ceiling, making it a practical front end for ultrasonic sensors, contact microphones and acoustic event detectors. Sampling at 500 kSPS provides headroom for anti-alias filtering and captures short transients that a slow sigma-delta converter would smear. Resolution of 12 bits yields about 72 dB of ideal code-driven dynamic range, which is adequate for level and event detection rather than for high-fidelity playback. The internal 2.5 V reference sets the conversion full scale, so bias the microphone output into the 0 V to VREF input window.
מומלץ
Low-Cost Data Loggers and Educational Bench Equipment
Design labs, teaching benches and entry-level loggers need an ADC that is easy to procure, simple to interface and inexpensive, and the ADS7835E fits that brief. Because it is a single-supply, single-channel SAR converter with an internal reference, a student or engineer only needs a microcontroller and a few passive parts to bring up a working acquisition path. The 8-pin VSSOP package is also convenient for perfboard and breadboard prototypes, and the same footprint is shared by the ADS7835E ordering codes, so a design can be moved to a different reel option without any board change. Expect to calibrate gain at system level because the reference is internal.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור ADS7835E — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | ADS7835EB/2K5 | ADS7835EB/250 | ADS7835E/250 | ADS7835E/2K5 | ADS7835E/2K5G4 |
|---|---|---|---|---|---|---|
| Package | 8-VSSOP (DBV) | 8-VSSOP (DBV) - same | 8-VSSOP (DBV) - same | 8-VSSOP (DBV) - same | 8-VSSOP (DBV) - same | 8-VSSOP (DBV) - same |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Resolution | 12 bit | 12 bit | 12 bit | 12 bit | 12 bit | 12 bit |
| Throughput Rate | 500 kSPS | 500 kSPS | 500 kSPS | 500 kSPS | 500 kSPS | 500 kSPS |
| Internal Reference | 2.5 V internal | 2.5 V internal | 2.5 V internal | 2.5 V internal | 2.5 V internal | 2.5 V internal |
| Architecture | SAR, 1 single-ended input | SAR, 1 single-ended input | SAR, 1 single-ended input | SAR, 1 single-ended input | SAR, 1 single-ended input | SAR, 1 single-ended input |
| Supply | Single +5 V operation | Single +5 V operation | Single +5 V operation | Single +5 V operation | Single +5 V operation | Single +5 V operation |
| Power Dissipation | 17.5 mW | 17.5 mW | 17.5 mW | 17.5 mW | 17.5 mW | 17.5 mW |
| Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C |
| Missing Codes | Guaranteed no missing codes | Guaranteed no missing codes | Guaranteed no missing codes | Guaranteed no missing codes | Guaranteed no missing codes | Guaranteed no missing codes |
| Reel / Ordering Option | Base E ordering code | EB marking, 2.5 k-unit reel | EB marking, 250-unit reel | E marking, 250-unit reel | E marking, 2.5 k-unit reel | E marking, 2.5 k-unit reel, green assembly |
מבדילים עיקריים
- 500 kSPS throughput in an 8-pin footprint (לעומתADS7835E/250)
- Internal 2.5 V reference eliminates a precision reference component (לעומתADS7835EB/2K5)
- Low 17.5 mW power dissipation for a 500 kSPS converter (לעומתADS7835E/2K5G4)
- Guaranteed no-missing-codes transfer function (לעומתADS7835EB/250)
הערות תכנון
Keep the analog path short: route AIN directly from the sensor or front-end network to the input pin, and place the anti-alias filter capacitor and resistor within a few millimetres of the package. The sample-and-hold input is sensitive to switching edges, so keep the SCLK and SYNC traces on the opposite side of the board from AIN, and avoid routing them directly over the analog ground area. Return AGND and DGND to a single solid ground plane at a quiet point rather than splitting the plane under the converter.
Place a low-ESR bypass capacitor at the AVDD pin and a second, smaller capacitor at the digital supply, each returning directly to the ground pin of the same device. Because the part is specified for single +5 V operation, confirm the minimum and maximum supply limits and the logic-level thresholds for CS, SCLK and SYNC in the recommended operating conditions table of the datasheet before connecting it to a 3.3 V microcontroller, and level-shift or re-time the clock if the host rail differs.
Do not treat the internal 2.5 V reference as an accuracy-grade reference source: the converter gain error and reference tolerance dominate absolute accuracy, so apply a one-point or two-point gain calibration in firmware. Another common error is driving SYNC and SCLK while chip select is inactive; idle the bus with a defined logic level and re-check the timing of the frame signal against the datasheet timing diagrams whenever the host clock rate is changed.
The conversion result is only as good as the reference noise that couples into the input. Keep the converter away from switching regulators and high-current inductors, and if the board also hosts a switching supply, add an RC filter ahead of AIN and verify the resulting attenuation against the highest signal of interest. For very low-level inputs, a slower sigma-delta converter with more resolution and digital filtering may be a better architectural choice than a 12-bit SAR part.
מידע על תאימות
The manufacturer lists a green/RoHS-oriented ordering code (ADS7835E/2K5G4) for this family; formal RoHS, REACH, halogen-free and conflict-minerals declarations for the ADS7835E should be confirmed from the manufacturer product page or material declaration before a compliance-critical release. The -40 °C to +85 °C rating indicates industrial-grade temperature capability, not AEC-Q100 automotive qualification.