ADS826E/1K - 10-Bit 60-MSPS ADC | Texas Instruments
MPN: ADS826E/1K ✓ פעילADS826E/1K סקירה
An ADC is an analog-to-digital converter, a data-acquisition IC that samples a continuous voltage and converts it into a numeric value. The ADS826E belongs to the pipelined ADC hierarchy, with architecture optimized for conversion speed, parallel data transfer, and applications requiring repeated sampling at high rates. Its place within the broader semiconductor hierarchy is signal-chain interface IC, suitable for industrial measurement, communications, instrumentation, and embedded control systems.
Key features include 10-bit resolution, a 60 MSPS conversion rate, one input channel, proprietary pipelined conversion, parallel word access, and CMOS construction. The differential-input option supports balanced analog signaling, while single-ended operation accommodates common source-referenced signals. Internal-reference operation simplifies standalone designs, and external-reference support allows designers to improve stability, scale the conversion range, or share a precision reference across multiple converters.
The parallel interface makes the ADS826E especially appropriate for systems in which the ADC can connect directly to a field-programmable gate array, digital signal processor, or dedicated data-capture logic. At 60 MSPS, it can capture 60 million conversion results per second. Designers should account for acquisition timing, output settling, clock jitter, analog input bandwidth, and digital data-capture latency when sizing the surrounding signal chain.
Typical applications include communications infrastructure, industrial data acquisition, instrumentation, control systems, test equipment, and embedded signal processing. The differential-input architecture is useful when the source has low amplitude or when common-mode noise must be rejected. A parallel-output system may require careful partitioning between the analog input stage, clock source, logic device, memory, and downstream processor.
Place the analog input and reference circuitry close to the converter, provide a clean return path for each analog input, and route the 10-bit output bus away from high-current switching nodes. Clock and output timing depend on the complete board environment, so use the acquisition timing diagrams in the manufacturer datasheet to establish setup and hold requirements for the connected digital logic.
This page combines the device specifications, compatible family options, interface timing considerations, and application guidance needed for initial design review. It also identifies where a design engineer must verify the complete pin assignment and timing details in the manufacturer datasheet before releasing a PCB layout.
חלופות תחליף ישיר עבור ADS826E/1K — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם ADS826E/1K (אותו גורם צורה וטביעת רגל) — שונים ב Reference, Sampling Rate.
ADS825E/1K
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←ADS823E/1K
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
ADS828E/1K
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
ADS822E/1K
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←ADS826E/1K דירוגים מרביים ומאפיינים חשמליים
| רזולוציה | 10 bit |
| קצב דגימה | 60 MSPS |
| Number of Input Channels | 1 channel |
| Conversion Architecture | Proprietary pipelined method |
| Output Interface | 10-bit parallel |
| Input Type | Single-ended or differential |
| Reference | Internal or external reference |
| Internal Reference Disable | Supported |
| Nominal Supply Voltage | 5 V |
| Process Technology | CMOS |
| מארז | 28-pin SSOP |
| Package Type | Gull-wing rectangular SSOP |
| Shipping Package | Tape and reel |
| טווח טמפרטורת פעולה | -40°C to +85°C |
| Temperature Grade | Industrial |
| Digital Output | Parallel word access |
| סטטוס RoHS | Unknown |
| REACH Status | Unknown |
מדריך תצורת פינים של ADS826E/1K tape and reel
תצורת פינים עבור ADS826E/1K (מארזת tape and reel). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.
אין נתוני פריסת פינים מפורטים עבור ADS826E/1K.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
ADS826E/1K מתאים עבור 6 יישוםs: Communications Signal Acquisition, Industrial Data-Acquisition System, Precision Test and Measurement, Audio and Control Signal Processing, Video and Imaging Interface, Embedded Real-Time Monitoring.
Communications Signal Acquisition
The ADS826E/1K is suitable for communications front ends that require rapid conversion and a parallel digital interface. Its 60 MSPS sampling rate provides substantial bandwidth for intermediate-frequency or baseband analysis, while the 10-bit output can feed an FPGA, DSP, or digital capture logic. Differential input can improve rejection of common-mode noise when the analog source is balanced. The principal design consideration is clock and data-capture timing: the connected logic must satisfy the acquisition and output timing specified by the manufacturer datasheet.
מומלץ
Industrial Data-Acquisition System
ADS826E/1K can form the conversion stage of an industrial acquisition system that samples sensors or process-control signals at high rate. The 60 MSPS capability reduces acquisition time for fast transients, while single-ended input supports simple grounded sensor interfaces and differential input supports balanced measurement chains. Its -40°C to +85°C industrial temperature range suits equipment operating across extended ambient conditions. Layout should keep the analog path short and isolate high-current switching nodes from the converter input and clock lines.
מומלץ
Precision Test and Measurement
The ADS826E/1K is appropriate for bench and production test systems that need to capture waveforms or sensor outputs rapidly through a parallel ADC. At 60 MSPS and 10-bit resolution, it balances sampling bandwidth against a straightforward digital interface. External-reference operation allows a precision reference to define the measurement range and improve repeatability when multiple channels must share a common reference. Designers should calculate the required input bandwidth and sampling aperture independently of the nominal converter rate.
מומלץ
Audio and Control Signal Processing
ADS826E/1K can serve as the high-rate sampling element in mixed-signal audio and control systems where the source waveform must be digitized before digital filtering or closed-loop control. The 10-bit parallel output enables direct connection to configurable logic, while the 60 MSPS rate supports substantially more samples per signal cycle than typical low-rate control ADCs. Differential input is useful for reducing susceptibility to ground-coupled noise. Clock jitter, input settling, and converter output timing remain the principal constraints.
מומלץ
Video and Imaging Interface
ADS826E/1K can contribute to high-speed imaging and video measurement chains requiring rapid digitization of an analog video or pixel signal. The 60 MSPS pipelined converter produces 10-bit parallel data for FPGA-based processing, while differential input suits balanced video-source architectures. A 10-bit result limits quantization granularity, so the complete signal chain must account for gain, reference accuracy, and analog bandwidth. Keep the 28-pin SSOP close to the acquisition FPGA to minimize data-bus routing and timing skew.
מומלץ
Embedded Real-Time Monitoring
ADS826E/1K supports embedded monitoring systems that must observe rapidly changing analog quantities and perform thresholding, filtering, or event analysis in digital logic. A 60 MSPS sampling rate captures more detail in short transients, while the 10-bit parallel bus can feed a programmable logic device or microprocessor peripheral. Single-ended operation is appropriate for simpler transducers, whereas differential input improves common-mode rejection. Firmware and hardware should include acquisition timing margins, reference settling, and appropriate input protection.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור ADS826E/1K — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | ADS825E/1K | ADS823E/1K | ADS828E/1K | ADS822E/1K |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 28-pin SSOP | 28-pin SSOP - same package | 28-pin SSOP - same package | 28-pin SSOP - same package | 28-pin SSOP - same package |
| Resolution | 10 bit | 10 bit | 10 bit | 10 bit | 10 bit |
| Sampling Rate | 60 MSPS | 40 MSPS | 40 MSPS | 75 MSPS | 40 MSPS |
| Input Channels | 1 channel | 1 channel | 1 channel | 1 channel | 1 channel |
| Conversion Architecture | Pipelined | Pipelined | Pipelined | Pipelined | Pipelined |
| Output Interface | 10-bit parallel | 10-bit parallel | 10-bit parallel | 10-bit parallel | 10-bit parallel |
| Input Type | Single-ended or differential | Single-ended or differential | Single-ended or differential | Single-ended or differential | Single-ended or differential |
| Reference | Internal or external | Internal or external | Internal or external | Internal or external | Internal or external |
מבדילים עיקריים
- Higher sampling rate than the 40 MSPS ADS82x family options (לעומתADS825E/1K)
- More sampling headroom than the 40 MSPS family members (לעומתADS823E/1K)
- Lower sampling rate than the 75 MSPS ADS828 (לעומתADS828E/1K)
הערות תכנון
Route the analog input, reference, and clock paths as short as practical, and place input decoupling close to the corresponding converter pins. Keep the 10-bit parallel bus away from inductors, switching-regulator nodes, and high-current return paths. A compact ground strategy beneath the analog section is generally preferable to a long ground connection through a large loop.
Design the clock source and acquisition chain around the converter's sampling aperture. Use a low-jitter clock, provide a continuous return path, and avoid routing the clock adjacent to parallel output lines where simultaneous switching can increase coupling. Review acquisition and output timing in the manufacturer datasheet, including setup and hold requirements for the FPGA, DSP, or capture logic.
Use separate, well-decoupled supply paths for the analog and digital portions of the converter as recommended in the manufacturer application circuit. Place stable ceramic decoupling at the supply pins and use a quiet reference network when accuracy matters. Verify power-up sequencing, bypass capacitance, and the allowable range of each supply rail against the complete datasheet before board release.
Do not treat a pin-compatible family member as an unconditional substitute. The ADS825E/1K, ADS823E/1K, and ADS822E/1K provide 40 MSPS, while ADS828E/1K provides 75 MSPS, compared with 60 MSPS for ADS826E/1K. Recheck acquisition bandwidth, output timing, reference implementation, and downstream logic constraints before approving a replacement.
מידע על תאימות
The device is categorized as an industrial-grade IC, but no specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration appears in the listed technical records. AEC-Q100 is not applicable to this industrial ADC designation.