ADSP-2171BS-133 16-Bit 33 MIPS DSP | Analog Devices
MPN: ADSP-2171BS-133 ✓ פעילADSP-2171BS-133 סקירה
A digital signal processor, or DSP, is a microprocessor architecture optimized for repetitive numerical operations such as filtering, modulation, transform, and waveform calculations. The ADSP-2171 belongs to the broader embedded processor hierarchy, where DSP instructions execute directly on sampled or generated data. Compared with a general-purpose microcontroller, this DSP is intended to reduce the overhead of high-volume arithmetic and to simplify real-time signal-processing implementations.
The principal operating characteristics are its 16-bit fixed-point architecture, 33 MIPS execution rate, 5 V supply, two serial ports, host port, and 24-bit external data bus. According to the ADSP-2171/ADSP-2172/ADSP-2173 datasheet, every instruction can execute in a single processor cycle. The 30 ns instruction-cycle specification corresponds to a 33.33 MHz instruction rate, while the listed maximum clock frequency is 16.67 MHz. These figures must be understood together: the processor architecture can complete an instruction every 30 ns under its specified operating conditions.
The ADSP-2171 is fabricated using a high-speed, double-metal, low-power CMOS process. Program storage, program RAM, serial interfaces, host-interface logic, and external memory addressing are integrated on one device, allowing a compact implementation of a dedicated signal-processing subsystem. The family is offered in 128-pin TQFP and PQFP packages. The -133 ordering code denotes the 16.67 MHz grade, while the BS portion identifies the package configuration used by this part.
Typical applications include industrial control, communications, audio and waveform processing, instrumentation, and embedded systems requiring deterministic numeric computation. The two serial ports can support peripheral or host data movement, while the host port provides an additional mechanism for communicating with a host processor. The 24-bit external data bus allows access to external data and program storage when internal memory is insufficient.
For new designs, use the manufacturer pin-description table and package drawing to assign every signal, especially supply, ground, clock, reset, and serial-interface connections. Confirm the complete memory map, external-memory timing, and pin multiplexing in the ADSP-217x hardware reference material before finalizing the PCB. The operating temperature grade, qualification status, lifecycle state, and exact decoupling requirements should also be confirmed for the production configuration.
This page consolidates the key ADSP-2171BS-133 electrical, package, interface, and application information with a focused comparison of the closest documented family members. It also identifies practical design checks and sourcing questions that are often distributed across product listings, datasheets, and cross-reference results, helping engineers evaluate the processor before beginning schematic or PCB work.
חלופות תחליף ישיר עבור ADSP-2171BS-133 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
ADSP-2172BS-133
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
ADSP-2173BS-133
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
ADSP-2171BS-133 מפרטים
| Product Type | 16-bit digital signal processor and single-chip microcomputer |
| Processor Architecture | 16-bit fixed-point DSP |
| Maximum Instruction Rate | 33 MIPS |
| תדר שעון מקסימלי | 16.67 MHz |
| Instruction Cycle Time | 30 ns |
| מתח אספקה | 5 V |
| External Data Bus Width | 24 bit |
| Serial Port Count | 2 ports |
| Host Port | 1 host port |
| Program ROM | 24-bit program ROM architecture |
| Program RAM | 24-bit program RAM architecture |
| Process Technology | High-speed, double-metal, low-power CMOS |
| מארז | 128-pin PQFP/TQFP plastic package |
| Terminal Count | 128 terminals |
| סוג הרכבה | Surface mount |
| טווח טמפרטורת פעולה | -40 °C to +85 °C |
| Application Classification | Industrial digital signal processing |
| Execution Model | Single-cycle instruction execution |
מדריך תצורת פינים של ADSP-2171BS-133 128-pin pqfp/tqfp plastic package
תצורת פינים עבור ADSP-2171BS-133 (מארזת 128-pin pqfp/tqfp plastic package). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.
אין נתוני פריסת פינים מפורטים עבור ADSP-2171BS-133.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
ADSP-2171BS-133 מתאים עבור 6 יישוםs: Industrial Control Systems, Digital Communications, Audio and Waveform Processing, Test and Measurement Instrumentation, Power and Energy Monitoring, Embedded Instrumentation and Control.
Industrial Control Systems
The ADSP-2171BS-133 fits real-time industrial control blocks that perform filtering, feedback calculation, or signal conditioning. Its 30 ns instruction-cycle time supports deterministic execution, while the 16-bit fixed-point architecture is appropriate for many digital control and measurement algorithms. Two serial ports can connect converters or peripheral devices, the host port supports supervisory communication, and the 24-bit external data bus can extend access to external memory. The 5 V supply and -40 °C to +85 °C temperature range support industrial equipment, although each power rail and interface voltage must remain compatible with the complete controller architecture.
מומלץ
Digital Communications
The ADSP-2171BS-133 can support modem, receiver, transmitter, and signal-processing functions where fixed-point numerical throughput is more useful than general-purpose control flexibility. At 33 MIPS, the processor can execute each instruction in a stated 30 ns cycle, making it suitable for repetitive filtering and demodulation routines. The two serial ports provide paths for digital converters or other serial peripherals, while the host port and external bus allow a host processor or external memory to participate in the data path. Designers should allocate external memory according to the ADSP-217x memory map and validate serial timing against the connected transceiver.
מומלץ
Audio and Waveform Processing
The ADSP-2171BS-133 is appropriate for fixed-point audio filtering, waveform generation, mixing, and real-time sample processing. Its 16-bit datapath and 30 ns instruction cycle provide a direct path for common digital signal-processing kernels, while two serial ports can connect audio converters using suitable serial formats. External program or data storage can be supported through the 24-bit external data bus when internal memory is insufficient. For a production audio design, confirm serial-port mapping, sample-rate timing, clock source configuration, and output latency in the hardware reference material rather than relying only on the family description.
מומלץ
Test and Measurement Instrumentation
The ADSP-2171BS-133 can serve as the numeric engine in instrumentation that performs sampling, filtering, calibration, and real-time analysis. The 33 MIPS instruction rate is useful for deterministic digital filtering and measurement algorithms, while the host port offers a control path to a supervisory processor or test interface. The 24-bit external bus permits use of external memory for larger trace or sample buffers. Board-level implementation must preserve the processor's 5 V supply requirements, provide a supported clock source, and follow the manufacturer pin assignment for the host port and external address and data buses.
מומלץ
Power and Energy Monitoring
The ADSP-2171BS-133 is suitable for embedded metering and energy-monitoring functions that require recurring numeric operations on sampled current, voltage, or sensor data. Fixed-point processing can implement filters, RMS calculations, accumulation, and compensation routines with predictable instruction timing. Its two serial ports can connect serial converters or sensors, while the host port can report processed results to a system controller. The design should budget arithmetic scaling and overflow margin, verify the external-memory interface when storing histories, and use the manufacturer clock and reset requirements to establish accurate measurement timing.
מומלץ
Embedded Instrumentation and Control
The ADSP-2171BS-133 can combine real-time signal analysis with host-controlled operation in embedded instrumentation. A host processor can use the dedicated host port for commands and status exchange while the DSP handles filters, transforms, or control calculations through local program and data space. The processor's -40 °C to +85 °C range supports many industrial embedded environments, and its surface-mount PQFP/TQFP package simplifies board integration. Firmware should account for the processor's 5 V supply, confirm reset and boot behavior, and use the ADSP-217x memory map to avoid conflicts between internal and external address regions.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור ADSP-2171BS-133 — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | ADSP-2172BS-133 | ADSP-2173BS-133 |
|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Package | 128-pin PQFP/TQFP | 128-pin PQFP/TQFP family configuration | 128-pin PQFP/TQFP family configuration |
| Processor Architecture | 16-bit fixed-point DSP | 16-bit fixed-point DSP | 16-bit fixed-point DSP |
| Supply Voltage | 5 V | 5.0 V | 3.3 V |
| Maximum Clock Frequency | 16.67 MHz | 16.67 MHz | 16.67 MHz |
| Instruction Rate | 33 MIPS | 33 MIPS | 33 MIPS |
| Instruction Cycle Time | 30 ns | 30 ns | 30 ns |
| External Data Bus | 24 bit | 24 bit | 24 bit |
| Program ROM | 24-bit program ROM architecture | 24-bit program ROM architecture with 8K words of 24-bit program ROM | 24-bit program ROM architecture |
| Serial and Host Interfaces | 2 serial ports and 1 host port | 2 serial ports and 1 host port | 2 serial ports and 1 host port |
מבדילים עיקריים
- Matches the established 5 V ADSP-2171 platform (לעומתADSP-2173BS-133)
- Does not add the ADSP-2172 program-ROM capacity (לעומתADSP-2172BS-133)
- Uses the 16.67 MHz grade with a 30 ns instruction cycle (לעומתADSP-2172BS-133)
הערות תכנון
Route the 24-bit external data bus and external address bus with controlled impedance, short traces, and continuous return paths. Place any external memory close enough to the DSP for the documented bus timing to remain valid. Because the target uses a 128-pin PQFP/TQFP package, allocate the land pattern directly from the Analog Devices package drawing rather than scaling a generic QFP footprint.
The ADSP-2171BS-133 belongs to the 5 V ADSP-2171 family, not the 3.3 V ADSP-2173 family. Follow the manufacturer power-pin and decoupling requirements exactly, including the required voltage tolerance and connection of every power and ground terminal. Confirm interface levels with connected peripherals so that the 5 V DSP domain does not inadvertently expose inputs to an incompatible voltage.
Keep the clock source and support components close to the associated DSP pins, and provide a stable reset path with no excessive ringing or uncontrolled trace length. The host port, serial ports, and external memory bus should be grouped according to signal function. Review the pin-description table for multiplexed and reserved signals before final routing, and do not leave unspecified package terminals unconsidered.
Do not treat ADSP-2171, ADSP-2172, and ADSP-2173 as interchangeable simply because they share the ADSP-217x name. The family differs in supply voltage and memory resources, and the ordering suffix also identifies speed and package details. A replacement must be checked against the exact clock rate, supply voltage, program-memory map, boot process, serial-port multiplexing, and package pinout.
מידע על תאימות
The ADSP-2171 family is identified for industrial use with a -40 °C to +85 °C operating temperature range. Explicit compliance and qualification statements were not established by the cited product information.