ADUM1447ARWZ-RL7 - Quad-Channel Digital Isolator | Analog Devices
MPN: ADUM1447ARWZ-RL7 ✓ פעילADUM1447ARWZ-RL7 סקירה
A digital isolator is a component that provides galvanic isolation between two circuits while allowing digital signals to pass across the isolation barrier. It uses capacitive or magnetic coupling to transfer data without a direct electrical connection, protecting sensitive electronics from high voltages, ground loops, and noise. Digital isolators are essential in systems where safety, signal integrity, and noise immunity are critical, such as in industrial automation, medical devices, and isolated power supplies.
Key features of the ADUM1447ARWZ-RL7 include its low power consumption (0.6 mA per channel at 3.3 V), high CMTI of 25 kV/µs, and a wide operating temperature range of -40°C to +125°C. The device supports a data rate of 2 Mbps, which is suitable for most control and communication interfaces. It also features a default output state of high when the input power is not applied, ensuring fail-safe operation in safety-critical systems.
Technically, the ADuM1447 uses Analog Devices' iCoupler technology, which employs chip-scale transformers to achieve isolation. This technology provides superior performance compared to optocouplers, including higher data rates, lower power consumption, and better reliability. The device is fully specified over the entire operating range, with propagation delay of 23 ns and pulse width distortion of 3 ns, ensuring accurate signal transmission.
Typical applications include isolated SPI, UART, and I2C interfaces, as well as isolated sensor data acquisition, motor control, and power supply monitoring. The ADUM1447ARWZ-RL7 is particularly suited for battery-powered or energy-harvesting systems where low power is critical.
When designing with this device, ensure that the bypass capacitors are placed close to the VDD1 and VDD2 pins to minimize noise. Also, consider the isolation rating and creepage requirements for your specific application to maintain safety standards.
חלופות תחליף ישיר עבור ADUM1447ARWZ-RL7 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם ADUM1447ARWZ-RL7 (אותו גורם צורה וטביעת רגל) — שונים ב Package, Supply Voltage (VDD1/VDD2), Propagation Delay, Pulse Width Distortion.
ADUM1447ARWZ
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←ADUM1447ARWZ-RL7
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←ADUM1447ARWZ-RL7 מפרטים
| Number of Channels | 4 |
| Isolation Voltage | 2500 Vrms |
| קצב נתונים | 2 Mbps |
| Common-Mode Transient Immunity (CMTI) | 25 kV/µs |
| Propagation Delay | 23 ns |
| Pulse Width Distortion | 3 ns |
| Supply Voltage (VDD1/VDD2) | 3.0 V to 5.5 V |
| Quiescent Current per Channel | 0.6 mA at 3.3 V |
| טווח טמפרטורת פעולה | -40°C to +125°C |
| מארז | 16-SOIC-W (0.300" width) |
| סוג הרכבה | Surface Mount |
| Default Output State | High |
| סטטוס RoHS | Compliant |
| Isolation Technology | iCoupler |
תצורת פינים של ADUM1447ARWZ-RL7
| פין 1 | VDD1 — Supply voltage for side 1 |
| פין 2 | GND1 — Ground for side 1 |
| פין 3 | VIA — Input channel A |
| פין 4 | VOA — Output channel A |
| פין 5 | VIB — Input channel B |
| פין 6 | VOB — Output channel B |
| פין 7 | VIC — Input channel C |
| פין 8 | VOC — Output channel C |
| פין 9 | VID — Input channel D |
| פין 10 | VOD — Output channel D |
| פין 11 | GND2 — Ground for side 2 |
| פין 12 | VDD2 — Supply voltage for side 2 |
| פין 13 | NC — No connect |
| פין 14 | NC — No connect |
| פין 15 | NC — No connect |
| פין 16 | NC — No connect |
יישומים טיפוסיים
ADUM1447ARWZ-RL7 מתאים עבור 6 יישוםs: Industrial Automation, Medical Devices, Isolated Power Supplies, Communication Interfaces, Motor Control, Data Acquisition Systems.
Industrial Automation
The ADUM1447ARWZ-RL7 provides galvanic isolation for industrial control signals, protecting microcontrollers from high-voltage transients and ground loops. With 2500 Vrms isolation and 25 kV/µs CMTI, it ensures reliable communication in noisy factory environments. Its low power consumption (0.6 mA per channel) is ideal for field sensors and actuators. The 2 Mbps data rate supports common industrial protocols like Modbus and CAN. The wide temperature range (-40°C to +125°C) suits harsh industrial conditions.
מומלץ
Medical Devices
In medical equipment, patient safety requires galvanic isolation between high-voltage sections and user-accessible parts. The ADUM1447ARWZ-RL7 provides 2500 Vrms isolation, meeting basic insulation requirements. Its low power consumption is beneficial for battery-operated devices like portable monitors. The high CMTI ensures stable operation in the presence of defibrillator discharges or electrosurgical interference. The 2 Mbps data rate is sufficient for vital sign monitoring and data acquisition.
מומלץ
Isolated Power Supplies
The ADUM1447ARWZ-RL7 is used in isolated power supply feedback loops to transfer PWM control signals across the isolation barrier. Its 2 Mbps data rate and 23 ns propagation delay allow precise control of switching regulators. The low quiescent current minimizes power loss, improving efficiency. The 2500 Vrms isolation rating ensures safe separation between primary and secondary sides. The device's default high output state provides fail-safe operation in case of power loss.
מומלץ
Communication Interfaces
The ADUM1447ARWZ-RL7 isolates UART, SPI, and I2C lines in communication systems, preventing ground loops and noise coupling. Its four channels can isolate multiple signal lines in a single package, saving board space. The 2 Mbps data rate supports standard UART speeds and low-speed SPI. The high CMTI ensures reliable data transmission in electrically noisy environments. The wide supply range (3.0 V to 5.5 V) allows interfacing with various logic levels.
מומלץ
Motor Control
In motor drives, the ADUM1447ARWZ-RL7 isolates gate driver signals from the microcontroller, protecting low-voltage logic from high-voltage transients. Its 25 kV/µs CMTI ensures reliable operation in the presence of fast switching noise. The 2 Mbps data rate is sufficient for PWM signals up to 100 kHz. The wide temperature range and low power consumption make it suitable for industrial motor control cabinets. The default high output state prevents unintended motor activation during power-up.
מומלץ
Data Acquisition Systems
The ADUM1447ARWZ-RL7 isolates digital data lines between sensors and data acquisition systems, preventing ground loops and noise. Its low power consumption is ideal for remote sensor nodes. The 2 Mbps data rate supports high-speed ADC data transfer. The 2500 Vrms isolation protects sensitive measurement equipment from high common-mode voltages. The device's small SOIC-W package is suitable for space-constrained designs.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור ADUM1447ARWZ-RL7 — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | ADUM1447ARQZ-RL7 | ADUM1447ARSZ-RL7 | ADUM1447ARWZ |
|---|---|---|---|---|
| Package | 16-SOIC-W | 16-QSOP | 16-SOIC-N | 16-SOIC-W |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Isolation Voltage | 2500 Vrms | 2500 Vrms | 2500 Vrms | 2500 Vrms |
| Data Rate | 2 Mbps | 2 Mbps | 2 Mbps | 2 Mbps |
| CMTI | 25 kV/µs | 25 kV/µs | 25 kV/µs | 25 kV/µs |
| Supply Voltage | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V |
| Quiescent Current | 0.6 mA/ch | 0.6 mA/ch | 0.6 mA/ch | 0.6 mA/ch |
| Operating Temperature | -40°C to +125°C | -40°C to +125°C | -40°C to +125°C | -40°C to +125°C |
מבדילים עיקריים
- Low power consumption (לעומתADUM1447ARQZ-RL7)
- Package variety (לעומתADUM1447ARSZ-RL7)
- Tape and reel packaging (לעומתADUM1447ARWZ)
הערות תכנון
Place 0.1 µF bypass capacitors close to VDD1 and VDD2 pins to minimize noise. Use a solid ground plane under the device to reduce EMI. Ensure adequate creepage distance between the two sides of the isolation barrier on the PCB to maintain the rated isolation voltage.
The ADUM1447ARWZ-RL7 consumes only 0.6 mA per channel at 3.3 V, making it suitable for low-power designs. However, ensure that the power supply can handle the total current for all channels and any load on the outputs. Use separate supply decoupling for VDD1 and VDD2 to prevent coupling between the two sides.
Do not exceed the absolute maximum ratings for supply voltage (7 V) or input/output voltages. Ensure that the input signals do not exceed the supply voltage. Also, verify that the default output state (high) is acceptable for your application, as it may cause unintended activation of connected circuits during power-up.
מידע על תאימות
RoHS compliance confirmed by Analog Devices. AEC-Q100 qualification not specified for this part.
