Analog Devices

ADV7281AWBCPZ-M - 10-Bit SDTV Video Decoder | Analog Devices

MPN: ADV7281AWBCPZ-M ✓ פעיל
1.71 V to 1.89 V Vdss 32-LFCSP, 5 mm × 5 mm Package
כמות הזמנה מינימלית: 1 |

ADV7281AWBCPZ-M סקירה

The Analog Devices ADV7281AWBCPZ-M is a 10-bit, 4-times-oversampled multiformat SDTV video decoder fabricated in a 1.8 V CMOS process and housed in a 32-LFCSP 5 mm × 5 mm package. It automatically recognizes worldwide NTSC, PAL, and SECAM analog baseband video and supports composite, S-Video, and component-video inputs. The decoder converts qualifying analog video into digital component data while providing an I2C-compatible control interface and integrated diagnostic outputs.

A video decoder is a mixed-signal semiconductor that converts analog baseband video into digital pixels. It sits between an analog video source and a digital video processor, display controller, capture system, or automotive infotainment platform. By combining format detection, 10-bit digitization, four-times oversampling, and serial configuration in one package, the ADV7281-M reduces the number of external conversion and identification components required for standard-definition video ingestion.

The ADV7281-M family provides six analog video inputs, two STB diagnostic pins, and three general-purpose outputs. Its multiformat architecture recognizes NTSC, PAL, and SECAM signals without a fixed regional setting. The 10-bit conversion path supports SDTV processing, while four-times oversampling improves sampling of the incoming analog waveform. Serial programming uses a two-wire, bidirectional I2C-compatible port, allowing a system controller to configure registers and read device status.

According to the Analog Devices ADV7281 product page, the decoder operates from a 1.71 V to 1.89 V supply range and supports an ambient temperature range of -40°C to +105°C. These values suit compact industrial, consumer, and automotive equipment where a single low-voltage digital process must coexist with analog video inputs. Differential video inputs are specifically identified for the ADV7281-M configuration, helping the analog input network target the decoder’s expected signal characteristics.

Typical uses include legacy video capture, industrial inspection equipment, broadcast monitoring, security-camera interfaces, set-top-box service designs, and automotive display systems that must accept composite, S-Video, or component analog video. The automatic standards detection is particularly useful in systems shared across regions because it reduces the number of manual configuration choices. The three general-purpose outputs and two STB diagnostic pins can support status, timing, or test functions when the host board and firmware provide the required circuits.

The analog input network, power distribution, and digital interface layout determine practical performance. Differential source impedances should be matched, input filtering should preserve the intended video bandwidth, and I2C pull-ups should be sized for the bus voltage and capacitance. The exposed-pad construction also requires adequate PCB copper and a controlled thermal path. Because the LFCSP layout is not represented by an exact package-diagram library entry, use the manufacturer pin-definition table when assigning tracks.

This page combines the manufacturer’s multiformat-decoder description with engineering-focused selection guidance, interface considerations, and package-level replacement analysis. It is designed to help engineers distinguish the standard-device variant from reel-ordering codes, select the correct Analog Devices family member, and plan PCB changes before committing to an analog-video ingestion architecture.

חלופות תחליף ישיר עבור ADV7281AWBCPZ-M — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

ADV7281AWBCPZ-M-RL

✅ Drop-In
Analog Devices
📦 32-LFCSP (5 mm × 5 mm)
10-bit oversampled SDTV video decoder · Single differential input · 10 bit · 4x · SDTV · 2-wire serial bidirectional interface, I2C compatible · 8-bit parallel YCrCb 4:2:2 output · ITU-R BT.656

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

ADV7281A-M

✅ Drop-In
📦 32-LFCSP (5 mm × 5 mm)
Same pinout and software compatibility as ADV7281-M, but uses the updated IDENT code and MIPI-oriented output configuration.

📋 חלופה להתייחסות (לא בקטלוג)

ADV7281-M

✅ Drop-In
📦 32-LFCSP (5 mm × 5 mm)
Same 10-bit multiformat decoder family and six-input architecture; ordering-code and configuration differences require firmware confirmation.

📋 חלופה להתייחסות (לא בקטלוג)

ADV7281-MA

✅ Drop-In
📦 32-LFCSP (5 mm × 5 mm)
Same multiformat 10-bit decoding platform, but the -MA model provides eight analog inputs versus six for ADV7281-M, a 33% input-count increase.

📋 חלופה להתייחסות (לא בקטלוג)

ADV7281A

✅ Drop-In
📦 32-LFCSP (5 mm × 5 mm)
Same pinout and software-compatible decoder platform as the MIPI-oriented ADV7281A-M family; the updated IDENT code must match the host driver.

📋 חלופה להתייחסות (לא בקטלוג)

ADV7281AWBCPZ-M דירוגים מרביים ומאפיינים חשמליים

Video Decoder Resolution 10 bit
Oversampling Ratio 4×
Supported Video Standard NTSC, PAL, and SECAM
Supported Video Formats Composite, S-Video, and component video
Analog Inputs 6 inputs
General-Purpose Outputs 3 outputs
STB Diagnostic Pins 2 pins
Control Interface 2-wire serial bidirectional, I2C-compatible
Digital Output Format YCrCb 4:2:2 component video
Supply Voltage Range 1.71 V to 1.89 V
Process Technology 1.8 V CMOS
טווח טמפרטורת פעולה -40°C to +105°C
מארז 32-LFCSP, 5 mm × 5 mm
סוג הרכבה Surface mount
Input Type Differential analog video inputs
Automatic Format Detection Supported

מדריך תצורת פינים של ADV7281AWBCPZ-M 32-lfcsp, 5 mm × 5 mm

תצורת פינים עבור ADV7281AWBCPZ-M (מארזת 32-lfcsp, 5 mm × 5 mm). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.

תרשים פינים של מארזת 32-lfcsp, 5 mm × 5 mm עבור ADV7281AWBCPZ-M

אין נתוני פריסת פינים מפורטים עבור ADV7281AWBCPZ-M.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

ADV7281AWBCPZ-M מתאים עבור 6 יישוםs: Automotive Infotainment Video Input, Industrial Video Inspection, Broadcast Video Monitoring, Security Camera Interface, Legacy Video Capture System, Set-Top Box and Media Adapter.

🚗

Automotive Infotainment Video Input

The ADV7281AWBCPZ-M is suitable for automotive infotainment platforms that must ingest legacy analog video from cameras, navigation displays, or external media interfaces. Its 10-bit conversion path, automatic NTSC/PAL/SECAM detection, and -40°C to +105°C operating range support robust SDTV decoding across temperature variation. The six analog inputs permit multiple source candidates to be routed into the decoder, while the I2C-compatible interface lets the vehicle domain controller select configurations and monitor status. Differential inputs should be terminated and filtered according to the manufacturer reference design, and the 1.71 V to 1.89 V supply must be produced by a low-noise rail. Host software must account for the digital output interface and IDENT value used by the selected ADV7281 family member.

🏭

Industrial Video Inspection

The ADV7281AWBCPZ-M can serve as the analog front end for industrial inspection equipment that receives composite, S-Video, or component video from cameras or legacy production systems. Automatic format detection avoids manually switching between NTSC, PAL, and SECAM sources, while four-times oversampling supports a stable 10-bit digitization path for SDTV analysis. The three general-purpose outputs can participate in status or routing functions when the system firmware assigns them appropriately. Because industrial installations may route long cables into the equipment, use balanced source connections, controlled impedance, and grounded protection components at the connector. The low-voltage digital supply should be isolated from analog switching noise, and the I2C bus should remain physically separated from sensitive video traces where practical.

🌐

Broadcast Video Monitoring

The ADV7281AWBCPZ-M is appropriate for broadcast monitoring equipment that accepts analog baseband feeds and converts them into digital component-video data for analysis or recording. It recognizes NTSC, PAL, and SECAM automatically, enabling one platform to monitor sources from different standards. The decoder produces YCrCb 4:2:2 data, which is compatible with downstream image-processing workflows that rely on separate luminance and chroma information. The I2C-compatible serial interface permits remote register configuration and status monitoring, which is useful in racks where direct access is inconvenient. Designers should preserve signal integrity from the connector through the differential input network, maintain a clean 1.8 V supply, and verify that the downstream processor accepts the output timing and data format enabled in the decoder registers.

🎥

Security Camera Interface

The ADV7281AWBCPZ-M can bridge an analog surveillance-camera output into a digital video pipeline when legacy cameras must coexist with network-based recording systems. Automatic detection of NTSC, PAL, or SECAM is useful in installations that mix camera generations and regional standards. Six analog inputs allow several cameras or test points to be connected, and the two STB diagnostic pins provide additional status-related resources for a carefully designed motherboard. Use surge protection and source isolation at external connectors, maintain matched impedances on differential inputs, and keep switching regulators and their high-current paths away from the analog input section. Firmware must verify signal lock and timing before accepting decoded frames, while the serial control bus provides a path to read status and adjust configuration.

🖥️

Legacy Video Capture System

The ADV7281AWBCPZ-M is well suited to legacy video-capture equipment requiring digitization of composite, S-Video, or component sources. Its 10-bit ADC path and four-times oversampling provide the foundation for SDTV image capture, while automatic format detection simplifies operation across mixed source populations. The decoder can feed a downstream processor through the family’s digital video interface, with the I2C-compatible port used for configuration and diagnostic reads. Care is required when converting to the host processor’s preferred format: YCrCb 4:2:2 output may require color-space and chroma-format handling in the capture pipeline. PCB layout should minimize analog trace lengths, provide uninterrupted ground returns, and place bypass capacitors near the decoder supply pins. Firmware should include timing-lock and input-selection checks before recording begins.

📺

Set-Top Box and Media Adapter

The ADV7281AWBCPZ-M can support set-top-box, television, or media-adapter designs that retain analog video compatibility while the rest of the system moves to digital processing. Automatic NTSC, PAL, and SECAM detection allows a single product variant to serve multiple broadcast regions, and the composite, S-Video, and component inputs cover common legacy connectors. The I2C-compatible interface integrates naturally with a system controller responsible for startup, channel selection, and diagnostics. In a consumer enclosure, protect the external analog inputs against ESD and cable transients while retaining controlled differential impedance. Keep the 1.8 V decoder supply filtered from display-related switching noise, and confirm that the downstream video engine accepts YCrCb 4:2:2 data with the timing generated by the ADV7281 configuration.

What is the ADV7281AWBCPZ-M?
The ADV7281AWBCPZ-M is a 10-bit, 4-times-oversampled SDTV video decoder that converts NTSC, PAL, or SECAM analog baseband video into YCrCb 4:2:2 component data. According to the Analog Devices ADV7281 product page, the device supports composite, S-Video, and component-video inputs and uses an I2C-compatible control interface.
What video standards does ADV7281AWBCPZ-M support?
The ADV7281AWBCPZ-M automatically detects NTSC, PAL, and SECAM analog baseband video signals. Its supported signal formats include composite video, S-Video, and component video. This multiformat capability lets one decoder design cover multiple regional television standards while the system configures the analog input path and reads operating status over the serial interface.
What is the supply voltage of ADV7281AWBCPZ-M?
The ADV7281AWBCPZ-M operates from 1.71 V to 1.89 V. The Analog Devices ADV7281 product page identifies the device as a 1.8 V CMOS multiformat video decoder, so the board supply and decoupling network should be designed for that narrow 180 mV operating range. Verify signal amplitudes and I2C logic levels against the manufacturer datasheet.
What package does ADV7281AWBCPZ-M use?
The ADV7281AWBCPZ-M uses a 32-LFCSP package measuring 5 mm × 5 mm. The surface-mount package includes a thermal pad that requires careful PCB layout and adequate copper for heat transfer. Use the manufacturer pin-description table when assigning tracks because an exact LFCSP-32 drawing is not included in the package-diagram library.
Where can I download the ADV7281AWBCPZ-M datasheet?
The official ADV7281AWBCPZ-M technical information is available from the Analog Devices ADV7281 product page at analog.com. That page provides the device family description and links to manufacturer documentation. The visible product listing identifies the part as a 10-bit, four-times-oversampled SDTV decoder with differential inputs.
Where can I find the ADV7281AWBCPZ-M pinout?
The ADV7281AWBCPZ-M pinout is identified in the manufacturer’s ADV7281 datasheet under the package-pin and pin-description tables. The device is supplied in a 32-LFCSP 5 mm × 5 mm package, so the exposed pad must also be reviewed as part of the land pattern and thermal design.
What is the operating temperature range of ADV7281AWBCPZ-M?
The ADV7281AWBCPZ-M supports an operating ambient temperature range of -40°C to +105°C. This range is stated by Analog Devices and makes the decoder suitable for temperature-constrained industrial and automotive environments. Confirm the complete temperature and electrical limits for the exact ordering code in the manufacturer datasheet.
How does ADV7281AWBCPZ-M compare with ADV7281A-M?
The ADV7281A-M is the MIPI-oriented model of the ADV7281A and has the same pinout and software compatibility as the ADV7281-M, except for an updated IDENT code. According to Analog Devices, both families decode analog baseband video into YCrCb 4:2:2 data. The ADV7281A-M is the closer choice when the host processor uses the MIPI CSI-2 output arrangement.
What can replace ADV7281AWBCPZ-M?
The ADV7281AWBCPZ-M-RL is the same base device offered with a reel-ordering suffix, while ADV7281A-M provides the same pinout and software compatibility with an updated IDENT code and MIPI-oriented output. A replacement must be checked for pinout, interface protocol, IDENT value, voltage range, and host-driver support before it is treated as a drop-in device.
When should I choose ADV7281AWBCPZ-M over ADV7281A-M?
Choose ADV7281AWBCPZ-M when the host interface and firmware are designed around the ADV7281-M output configuration. Choose ADV7281A-M when the system uses the MIPI-oriented ADV7281A interface and its corresponding IDENT code. Analog Devices states that the ADV7281A-M has the same pinout and software compatibility as the ADV7281-M except for that updated IDENT value.
Is ADV7281AWBCPZ-M suitable for automotive video systems?
The ADV7281AWBCPZ-M supports an ambient temperature range of -40°C to +105°C and differential analog video inputs, making it suitable for many automotive video-ingestion designs. Its 1.71 V to 1.89 V supply range also fits low-voltage digital systems. Vehicle qualification requirements and the exact ordering code must still be checked against the manufacturer documentation.
How does the I2C interface work on ADV7281AWBCPZ-M?
The ADV7281AWBCPZ-M uses a two-wire, serial, bidirectional interface that is I2C-compatible. This bus allows the host controller to configure decoder registers and retrieve status information. The board must provide compatible pull-ups and observe the voltage, timing, and addressing requirements in the manufacturer datasheet; the interface should not be treated as a general-purpose high-speed video data link.
How many analog inputs does ADV7281AWBCPZ-M have?
The ADV7281-M configuration provides six analog inputs, two STB diagnostic pins, and three general-purpose outputs. Six inputs give the board several candidate sources for composite, S-Video, or component video, while the diagnostic and general-purpose pins support status or board-specific functions. Actual routing depends on the pin-description table and the selected signal architecture.
Where can I request a quote for ADV7281AWBCPZ-M?
Use the Request a Quote form on this page to request current unit availability, quantity pricing, and lead time for ADV7281AWBCPZ-M. The form is the appropriate channel because pricing and inventory can change with order quantity and market conditions. Include your target quantity, package preference, and required delivery date in the request.
What are the key specifications of ADV7281AWBCPZ-M that engineers should know?
The essential specifications are 10-bit video decoding, 4× oversampling, a 1.71 V to 1.89 V supply range, a -40°C to +105°C operating range, and a 32-LFCSP 5 mm × 5 mm package. The device automatically recognizes NTSC, PAL, and SECAM signals, accepts composite, S-Video, and component inputs, and is configured through an I2C-compatible interface.

נתוני עזר הנדסיים עבור ADV7281AWBCPZ-M — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose ADV7281AWBCPZ-M when the design requires the ADV7281-M family’s established host interface and firmware, and six analog inputs are sufficient. Choose ADV7281A-M when the downstream processor uses the MIPI-oriented ADV7281A output and the firmware can recognize its updated IDENT code; its same pinout simplifies PCB reuse. Choose ADV7281-MA when eight analog inputs are useful, accepting that the extra two inputs may affect signal routing, board area, and validation. Use ADV7281AWBCPZ-M-RL when purchasing documentation requires the reel-ordering suffix. Before approving any replacement, verify the exact ordering code, package land pattern, analog-input count, output protocol, IDENT value, supply range, and host-driver support. The decoder’s 10-bit resolution, automatic NTSC/PAL/SECAM detection, and multiformat analog input capability remain central to the family selection.

השוואה עם חלופות

פרמטר מוצר זה ADV7281AWBCPZ-M-RL ADV7281A-M ADV7281-M ADV7281-MA ADV7281A
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 32-LFCSP (5 mm × 5 mm) 32-LFCSP (5 mm × 5 mm) 32-LFCSP (5 mm × 5 mm) 32-LFCSP (5 mm × 5 mm) 32-LFCSP (5 mm × 5 mm) 32-LFCSP (5 mm × 5 mm)
Video Resolution 10 bit 10 bit 10 bit 10 bit 10 bit 10 bit
Oversampling Ratio 4× 4× 4× 4× 4× 4×
Supply Voltage Range 1.71 V to 1.89 V 1.71 V to 1.89 V 1.71 V to 1.89 V 1.71 V to 1.89 V 1.71 V to 1.89 V 1.71 V to 1.89 V
Operating Temperature Range -40°C to +105°C -40°C to +105°C -40°C to +105°C -40°C to +105°C -40°C to +105°C -40°C to +105°C
Analog Input Count 6 inputs 6 inputs 6 inputs 6 inputs 8 inputs 6 inputs
Supported Video Standards NTSC, PAL, and SECAM NTSC, PAL, and SECAM NTSC, PAL, and SECAM NTSC, PAL, and SECAM NTSC, PAL, and SECAM NTSC, PAL, and SECAM
Supported Analog Formats Composite, S-Video, and component video Composite, S-Video, and component video Composite, S-Video, and component video Composite, S-Video, and component video Composite, S-Video, and component video Composite, S-Video, and component video
Host Interface Orientation ADV7281-M parallel family interface ADV7281-M parallel family interface MIPI-oriented interface with updated IDENT code ADV7281-M parallel family interface ADV7281-M parallel family interface MIPI-oriented interface

מבדילים עיקריים

  • Broad standard detection in one decoder (לעומתADV7281-MA)
  • Direct compatibility with existing ADV7281-M host software (לעומתADV7281A-M)
  • Exact base-device option for reel procurement (לעומתADV7281AWBCPZ-M-RL)
  • Four-times oversampled 10-bit conversion (לעומתADV7281AWBCPZ-M-RL)

הערות תכנון

Keep the six differential analog inputs short, symmetric, and referenced to a continuous ground plane. Match each input pair through the connector, protection network, and routing layer, and avoid placing high-speed digital traces beneath the analog inputs. Place the input network close to the decoder and follow the manufacturer reference layout so that ESD components and filtering do not create impedance discontinuities that appear as ringing or unstable format detection.

Design the 1.71 V to 1.89 V supply around the decoder's low-voltage requirements. Use local high-frequency bypass capacitance at the supply pins and route the power connection through the exposed thermal pad as directed by the manufacturer land pattern. Keep switching-converter loops and inductors away from the analog inputs. Because the allowable supply window is only 180 mV, verify startup, load regulation, and tolerance across the complete temperature range rather than relying on a nominal 1.8 V rail.

Treat the analog video inputs as high-impedance, high-frequency signal paths rather than ordinary power or logic nets. Maintain consistent pair spacing, provide a nearby quiet ground reference, and validate the complete source impedance with the chosen protection components. Four-times oversampling does not compensate for a poorly terminated analog front end. During bring-up, check signal presence, synchronization, and format detection before evaluating decoded image quality or changing digital-video timing.

The 32-LFCSP package uses an exposed pad to transfer heat into the PCB. Provide solderable thermal-pad land area, follow the manufacturer’s solder-mask and paste guidance, and avoid accidental voiding during assembly. Use copper on both sides where board rules permit and add thermal vias only when they do not compromise the analog return path. Track junction temperature in high-ambient enclosures rather than assuming that the small package is inherently thermally sufficient.

Do not substitute ADV7281A-M without checking the IDENT code and host-side interface configuration. Analog Devices describes it as pin-compatible and software compatible with ADV7281-M except for the updated IDENT code, but a boot driver that identifies only the original code may reject the device. Likewise, confirm that every alternative has the intended analog-input count, output protocol, and firmware support before releasing a PCB revision.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The manufacturer product page and product listings do not explicitly state the requested compliance fields for this ordering code. Automotive suitability should not be treated as AEC-Q100 qualification without the exact manufacturer declaration.

הנתונים אומתו בתאריך: 2026-11-16 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

ADV7281AWBCPZ-M ADV7281AWBCPZ-M datasheet ADV7281AWBCPZ-M datasheet pdf ADV7281AWBCPZ-M pinout ADV7281AWBCPZ-M price ADV7281AWBCPZ-M stock ADV7281AWBCPZ-M equivalent ADV7281AWBCPZ-M replacement ADV7281AWBCPZ-M vs ADV7281A-M Analog Devices ADV7281AWBCPZ-M ADV7281AWBCPZ-M 32-LFCSP ADV7281AWBCPZ-M analog video decoder

רכיבים ומונחים קשורים

Analog Devices ADV7281AWBCPZ-M ADV7281AWBCPZ-M-RL ADV7281A-M ADV7281-M ADV7281-MA ADV7281A video decoder multiformat video decoder mixed-signal semiconductor analog baseband video composite video S-Video component video NTSC PAL SECAM YCrCb 4:2:2 10-bit ADC 4× oversampling I2C 1.8 V CMOS 32-LFCSP surface mount differential analog input
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר