AK5366VQ - 24-Bit 48kHz ADC with PGA/ALC | AKM Audio
MPN: AK5366VQ ✓ פעילAK5366VQ סקירה
An ADC is a data-acquisition and signal-conversion integrated circuit that converts an analog voltage into a digital representation. In audio equipment, the converter's bit depth helps describe the numerical resolution of each sample, while its sampling rate determines how many samples are processed each second. The AK5366VQ operates as a 24-bit ADC at 48 kHz and is specifically oriented toward consumer audio and digital recording rather than general-purpose high-speed instrumentation.
The selector allows multiple analog input paths to be routed to the conversion system, reducing the need for external source-selection circuitry in multi-source audio products. The PGA provides controllable analog gain before digitization, allowing the front end to better match source levels to the converter range. The ALC function helps maintain a more consistent signal level when input amplitudes vary. Together, these functions simplify the audio signal path while reducing the number of discrete conditioning blocks required around the ADC.
The AK5366 series documentation also identifies the AKD5366VR-A as an evaluation board for the 24-bit, 48 kHz digital-audio ADC, with an input circuit and a digital-interface transmitter. This reference implementation is useful for evaluating the conversion architecture and input-conditioning behavior before integrating AK5366VQ into a finished audio product. Exact electrical limits, interface timing, clocking requirements, and pin assignments should be confirmed in the manufacturer datasheet before schematic capture.
Typical applications include consumer-audio analog input sections, digital recorders, microphone preamplifier interfaces, home-audio equipment, and other products that combine selectable analog sources with gain and level-control functions. The AK5366VQ is particularly relevant when a design needs one audio ADC rather than separate selector, gain-control, and conversion stages.
For implementation, begin with the manufacturer pin description and typical application circuit, then allocate the analog, digital, clock, and power sections according to those recommendations. Preserve the recommended input and output component values around the converter, and verify clock timing and digital-interface settings against the device documentation before production testing.
This product page consolidates the exact AK5366VQ series description, packaging information, sourcing references, application guidance, and replacement-screening criteria into a design-focused resource. For current commercial availability, use the Request a Quote form on this page and confirm production quantities, lifecycle status, and delivery timing before placing an order.
חלופות תחליף ישיר עבור AK5366VQ — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
אין חלופות תואמות Drop-in עבור מוצר זה.
בקשת חלופותAK5366VQ דירוגים מרביים ומאפיינים חשמליים
| Device Type | 24-bit sampling ADC |
| קצב דגימה | 48 kHz |
| רזולוציה | 24 bit |
| Input Selector | Integrated selector |
| Programmable Gain Amplifier | Integrated PGA |
| Automatic Level Control | Integrated ALC |
| Signal Category | Analog audio |
| Primary Application | Consumer audio and digital recording |
| Manufacturer | Asahi Kasei Microdevices/AKM |
| Series | AK5366 |
| Package Type | Tray |
| Evaluation Board | AKD5366VR-A |
מדריך תצורת פינים של AK5366VQ tray
תצורת פינים עבור AK5366VQ (מארזת tray). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.
אין נתוני פריסת פינים מפורטים עבור AK5366VQ.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
AK5366VQ מתאים עבור 6 יישוםs: Consumer Audio ADC Front End, Digital Recording Equipment, Multi-Source Audio Selector, Microphone Preamplifier Interface, Home Audio Equipment, Audio Data-Acquisition Front End.
Consumer Audio ADC Front End
The AK5366VQ fits a consumer-audio front end that must convert analog sound signals at 24-bit resolution and 48 kHz while minimizing the number of separate conditioning components. Its integrated selector routes audio sources, the PGA applies programmable analog gain, and the ALC helps maintain a consistent level as source amplitude changes. This consolidation is useful in compact audio products where component count and analog routing complexity matter. Designers should follow the manufacturer application circuit for input and output component values, clocking, grounding, and digital-interface routing. The AKD5366VR-A evaluation board provides a relevant development platform with an input circuit and digital-interface transmitter.
מומלץ
Digital Recording Equipment
AK5366VQ is appropriate for digital-recording products that capture selected analog audio sources and require conversion, gain adjustment, and level control in one device. The 24-bit, 48 kHz conversion format matches consumer-audio recording requirements, while the selector supports multiple source paths and the PGA allows the analog level to be matched before conversion. Integrating these functions can reduce external analog switching and conditioning complexity. Clock generation, supported digital-audio modes, analog reference connections, and bypass or mute behavior must be checked in the manufacturer datasheet before schematic release.
מומלץ
Multi-Source Audio Selector
The AK5366VQ's integrated selector makes it suitable for products accepting more than one analog audio source, such as line input, microphone input, or another playback path. Source selection occurs within the dedicated audio ADC rather than through a separate system-level switching stage, which can simplify signal routing and reduce the number of components around the converter. The PGA then provides a controllable gain stage and the ALC addresses signal-level variation. Board designers should assign each input according to the manufacturer pin table and verify impedance, biasing, and grounding requirements for every selected source.
מומלץ
Microphone Preamplifier Interface
AK5366VQ can serve as the conversion element in a microphone-oriented input interface when its PGA and ALC functions are configured for the required operating range. The PGA provides signal conditioning ahead of the 24-bit, 48 kHz conversion stage, while ALC can help accommodate input-level changes associated with different speaking or recording conditions. Because microphone biasing, source impedance, and gain limits are application-dependent, engineers must follow the datasheet for the selected input configuration. The AKD5366VR-A board is useful for evaluating the input circuit and digital-interface behavior before integrating the production IC.
מומלץ
Home Audio Equipment
AK5366VQ is suitable for home-audio equipment requiring a dedicated analog-to-digital stage for recording, monitoring, or media functions. A 24-bit, 48 kHz ADC provides the stated conversion format, while the integrated selector, PGA, and ALC support practical input-conditioning requirements in consumer devices. Using one audio converter can reduce discrete front-end complexity and standardize the analog signal path. For a new design, verify supply rails, clock sources, digital-audio routing, and PCB placement against the manufacturer guidance, and use the evaluation board for early acoustic and interface testing.
מומלץ
Audio Data-Acquisition Front End
AK5366VQ can serve as a focused audio data-acquisition front end when the required sample rate is 48 kHz and a 24-bit numerical format is appropriate. The selector manages multiple inputs, the PGA conditions their level, and the ALC helps stabilize signal amplitude before conversion. Compared with a general-purpose data-acquisition ADC, the integration can reduce the surrounding analog subsystem. Engineers should still perform system-level noise, aliasing, clock-jitter, and dynamic-range checks using the evaluation board and the manufacturer's application circuit rather than assuming generic ADC performance applies.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור AK5366VQ — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה |
|---|---|
| Device Type | 24-bit sampling ADC |
| Sampling Rate | 48 kHz |
| Resolution | 24 bit |
| Input Selector | Integrated |
| Programmable Gain Amplifier | Integrated PGA |
| Automatic Level Control | Integrated ALC |
| Brand | Asahi Kasei Microdevices |
| Package | Tray package |
| Primary Application | Consumer audio and digital recording |
הערות תכנון
Use the AK5366 manufacturer typical-application layout as the starting point for analog, digital, clock, and power connections. Keep the converter's analog input paths compact, maintain the recommended grounding topology, and route digital-audio and clock signals away from sensitive audio inputs. Because the exact pinout and layout recommendations are not reproduced on this page, use the datasheet's pin table and layout example during schematic and PCB review.
Do not treat the AKD5366VR-A evaluation board as a production IC or assume that AK5366VR is pin-compatible with AK5366VQ. The evaluation board is a development platform with an input circuit and digital-interface transmitter, and the available product information does not establish equivalent package terminals. Confirm production-device pins, supply requirements, clocking, and interface modes directly from the AK5366 documentation before releasing a design.
Plan the clock and digital-audio routing as a controlled signal path rather than as ordinary board wiring. Follow the manufacturer's clock topology and interface timing requirements, keep clock traces short where the datasheet recommends it, and provide return paths that do not cross the analog input area. Validate jitter, signal integrity, and data timing at the intended 48 kHz operating mode using the evaluation board before production release.
Determine the power architecture from the AK5366VQ supply-voltage and current limits in the manufacturer datasheet. Separate analog and digital supply paths where the reference design specifies filtering or local decoupling, and place the recommended bypass capacitors close to their assigned pins. Do not use supply-current figures from a different ADC as substitutes; evaluate the actual mode, clock rate, interface activity, and thermal conditions used by the product.
מידע על תאימות
No product-specific compliance declarations are identified in the available AK5366VQ product information.