ATF16V8CZ-12XC - 12ns 8-Macrocell PLD | Microchip
MPN: ATF16V8CZ-12XC ✓ פעילATF16V8CZ-12XC סקירה
A programmable logic device, or PLD, is a semiconductor whose digital logic function is defined after manufacture. The ATF16V8CZ belongs to the PAL-compatible 16V8 architecture and extends beyond generic 16R8 devices by supporting combinational, registered, and complex registered configurations. It is used when fixed-function glue logic would require several gates, counters, or discrete logic ICs.
The device provides eight macrocells, with eight product terms allocated to each output. Its maximum pin-to-pin delay is 12 ns, making it appropriate for control, decoding, interface, and state-machine functions that do not require a modern FPGA. The ATF16V8CZ also provides an edge-sensing power-down mode with 5 uA typical current and a low 25 uA standby-power specification, helping conserve power in equipment with intermittent operation.
Its EECMOS architecture uses electrically erasable Flash memory, allowing programmed logic to be erased and rewritten rather than permanently fused. The architecture is designed as a superset of generic 16R8 and many 20-pin combinatorial PLD arrangements, simplifying migration from older GAL or PAL devices when the pin configuration and logic equations remain compatible.
Typical uses include printer and copier control, industrial panel interfaces, legacy bus decoding, addressable logic, instrumentation control, and small embedded systems requiring high-density combinational or registered functions. The 20-pin TSSOP package also supports compact, surface-mounted PCB layouts where a larger PLCC package would be less convenient.
Designers should verify the device's registered-output mode, pin assignments, and power-down behavior against the manufacturer datasheet before replacing an older PAL or GAL. Programming equipment, device-file compatibility, and the distinction between combinational and registered outputs are as important as package dimensions when establishing a drop-in replacement.
This product page combines the manufacturer's electrical and architectural details with package-level guidance, application analysis, and clearly qualified same-family alternatives. It also identifies where timing, pin-level, lifecycle, and compliance information must be confirmed before production release.
חלופות תחליף ישיר עבור ATF16V8CZ-12XC — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם ATF16V8CZ-12XC (אותו גורם צורה וטביעת רגל) — שונים ב Device Type, Macrocells.
ATF16V8CZ-10XC
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
ATF16V8CZ-15XC
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←ATF16V8CZ-12XC דירוגים מרביים ומאפיינים חשמליים
| Device Type | High-performance EECMOS programmable logic device |
| PLD Architecture | 16V8 |
| Macrocells | 8 macrocells |
| Maximum Pin-to-Pin Delay | 12 ns |
| Logic Gate Capacity | 250 gates |
| מתח אספקה | 5 V |
| Maximum Input Count | 16 inputs |
| Configurable I/O Count | 8 I/Os |
| Program Memory Technology | Electrically erasable Flash memory |
| Product Terms per Output | 8 product terms |
| Power-Down Current | 5 uA typical in edge-sensing power-down mode |
| Standby Power Current | 25 uA |
| Input Compatibility | CMOS and TTL compatible |
| מארז | 20-pin TSSOP |
| סוג הרכבה | Surface mount |
מדריך תצורת פינים של ATF16V8CZ-12XC 20-pin tssop
תצורת פינים עבור ATF16V8CZ-12XC (מארזת 20-pin tssop). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור ATF16V8CZ-12XC.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
ATF16V8CZ-12XC מתאים עבור 6 יישוםs: Industrial Control Panel Logic, Legacy Bus Address Decoding, Printer and Copier Sequencing, Instrumentation Signal Qualification, Embedded System Peripheral Control, Smart Sensor Interface Logic.
Industrial Control Panel Logic
The ATF16V8CZ-12XC suits compact industrial control logic that must combine several Boolean functions without allocating an FPGA. Its eight macrocells can implement decoding, interlocks, mode selection, and state-transition logic, while the 12 ns maximum pin-to-pin delay supports moderately demanding control paths. Electrically erasable Flash memory allows firmware revisions without replacing the device, and the 20-pin TSSOP package simplifies dense surface-mounted assemblies. Timing should be evaluated across voltage and temperature because the quoted 12 ns figure is a maximum device delay rather than a guaranteed system margin.
מומלץ
Legacy Bus Address Decoding
The ATF16V8CZ-12XC can consolidate address decoding and command qualification for legacy peripheral buses into one PLD. Eight configurable outputs provide chip-select or control functions, while up to 16 inputs can observe address, control, and status signals. The 12 ns speed grade is suitable for moderate bus timing, and electrically erasable Flash memory provides a practical path to update decode logic. Engineers should recreate the original logic equations and verify registered versus combinational output modes before using it as a replacement in an existing bus interface.
מומלץ
Printer and Copier Sequencing
Printer, copier, and office-equipment controllers often require compact sequencing logic for sensors, motors, indicators, and paper-path interlocks. The ATF16V8CZ-12XC combines eight macrocells with a maximum 12 ns pin-to-pin delay in a surface-mount 20-pin TSSOP package, reducing the component count compared with several small logic ICs. Its reprogrammable Flash architecture supports logic revisions during product development. The design should use conservative I/O timing assumptions and avoid treating the programmable outputs as substitutes for power-stage drivers or protected motor-control circuitry.
מומלץ
Instrumentation Signal Qualification
The ATF16V8CZ-12XC can implement signal qualification, range selection, status decoding, and test-sequence logic around instrumentation analog front ends. Its CMOS- and TTL-compatible inputs simplify interfacing with mixed logic families, while eight programmable I/Os support multiplexing and control functions. The 12 ns maximum pin-to-pin delay is useful for short combinational paths, although it does not replace a high-performance FPGA for complex digital filtering. Confirm the exact I/O voltage and timing limits in the manufacturer datasheet before connecting external sensor or test equipment.
מומלץ
Embedded System Peripheral Control
The ATF16V8CZ-12XC can consolidate peripheral-select, interrupt-routing, and mode-control logic around a microcontroller or processor. Its 16V8 architecture provides more programmable logic than a simple dual inline gate while avoiding the configuration overhead of an FPGA. The 20-pin TSSOP package is useful in compact embedded controllers, and the 12 ns delay supports many short control paths. Because the PLD cannot automatically mirror a processor's modern bus protocol, the designer must define handshake, polarity, and registered-output behavior explicitly in the programming file.
מומלץ
Smart Sensor Interface Logic
The ATF16V8CZ-12XC can translate sensor and switch inputs into standardized control signals for monitoring equipment. With up to 16 inputs and eight configurable I/Os, it can handle threshold qualification, debounce-related logic, alarm routing, and operating-mode selection in a compact package. Its 5 V operating environment and CMOS- or TTL-compatible inputs suit systems designed around conventional logic levels. The PLD does not perform analog sensing or signal conditioning, so sensor excitation, filtering, and protection remain separate circuit functions, and the 12 ns delay should be checked against the required response time.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור ATF16V8CZ-12XC — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | ATF16V8CZ-10XC | ATF16V8CZ-15XC |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 20-pin TSSOP | 20-pin TSSOP - same | 20-pin TSSOP - same |
| Maximum Pin-to-Pin Delay | 12 ns | 10 ns | 15 ns |
| PLD Architecture | 16V8 | 16V8 | 16V8 |
| Macrocells | 8 macrocells | 8 macrocells | 8 macrocells |
| Program Memory Technology | Electrically erasable Flash memory | Electrically erasable Flash memory | Electrically erasable Flash memory |
| Supply Voltage | 5 V | 5 V | 5 V |
| Input and I/O Configuration | Up to 16 inputs and 8 configurable I/Os | Up to 16 inputs and 8 configurable I/Os | Up to 16 inputs and 8 configurable I/Os |
מבדילים עיקריים
- Balanced timing grade for general-purpose 16V8 designs (לעומתATF16V8CZ-15XC)
- Faster timing than the standard 12 ns selection (לעומתATF16V8CZ-10XC)
- Pin-compatible architecture with programmable Flash logic (לעומתATF16V8CZ-15XC)
הערות תכנון
Confirm that the replacement program uses the intended registered or combinational output mode and that every pin matches the original PCB footprint. The ATF16V8CZ architecture supports multiple operating modes, so a device with the same package and timing grade may still differ in behavior if its configuration file, fuse map, or output polarity is changed. Re-run the complete logic simulation with realistic input transitions before approving a substitution.
Use the manufacturer's pin-description table and package drawing when assigning TSSOP tracks, with particular attention to power, ground, programming, and configurable I/O functions. Keep the 5 V supply path short and provide the required bypass capacitance close to the device. For fast external signals, avoid long unprotected traces and ensure connected inputs remain within the voltage limits stated for the exact suffix.
The device's 5 uA typical edge-sensing power-down mode and 25 uA standby-power specification describe specific operating conditions rather than total system consumption. Measure current across clock, programming, and normal operating states, and account for external pull resistors and attached logic loads. In battery-powered equipment, also verify that the power-down strategy does not change the state of latched or registered outputs unexpectedly.
מידע על תאימות
The device is a general-purpose commercial logic IC; no automotive qualification is indicated. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from current manufacturer documentation.