ATMEGA329PA-AUR - 8-bit AVR MCU, 32KB Flash, 20MHz, 64-TQFP | Microchip
MPN: ATMEGA329PA-AUR ✓ פעילATMEGA329PA-AUR סקירה
An 8-bit AVR microcontroller is a single-chip computer based on the Harvard-architecture AVR (Alf and Vegard's RISC processor) instruction set introduced by Atmel (now Microchip). It belongs to the broader microcontroller hierarchy: MCU -> 8-bit MCU -> AVR family -> ATmega series -> picoPower sub-series. picoPower variants add advanced sleep modes and reduced active current for battery-driven designs, positioning the AVR between ultra-low-power MSP430 and high-performance Cortex-M0 in the embedded computing spectrum.
Key features include a 6-channel 10-bit ADC, two 8-bit and one 16-bit timer/counter with PWM, a USART, SPI and TWI (I2C) serial interfaces, an LCD controller (up to 4x25 segments), an analog comparator, a JTAG debug interface, and six software-selectable power-saving modes. The device supports read-while-write self-programming and operates from 2.7 V to 5.5 V, making it compatible with both 3.3 V and 5 V logic systems.
Architecturally, the ATMEGA329PA-AUR combines a 32 KB self-programmable Flash with separate 1 KB EEPROM and 2 KB SRAM, allowing firmware upgrades in the field without external bootloaders. The integrated QTouch peripheral-touch-controller support and on-chip LCD driver reduce BOM cost for HMI designs, while the JTAG and debugWIRE interfaces streamline development with tools such as Microchip Studio 7 and the AVR Dragon.
Typical applications include industrial control panels, consumer appliances with LCD displays, portable medical devices, security and alarm panels, sensor hubs, and battery-powered IoT endpoints. The wide operating voltage range and rich peripherals also suit automotive body controllers and home-automation gateways.
A key design consideration is supply-voltage headroom: at 20 MHz the core needs 4.5 V to 5.5 V, while lower clock targets up to 10 MHz can run at 2.7 V. Designers should also enable the brown-out detector and unused-pin pull-ups to reduce quiescent current in battery-driven designs.
This page synthesizes distributor pricing, drop-in TQFP-64 alternatives, and practical design notes not found in the standalone manufacturer datasheet.
חלופות תחליף ישיר עבור ATMEGA329PA-AUR — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם ATMEGA329PA-AUR (אותו גורם צורה וטביעת רגל) — שונים ב Package, LCD Controller, RoHS Status, Core Architecture, Supply Voltage Range.
ATMEGA329P-20AU
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←ATMEGA329-16AU
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←ATMEGA329A-AU
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←ATMEGA3290PA-AUR
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←ATMEGA3290P-20AUR
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←ATMEGA325PA-AUR
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←ATMEGA329PA-AUR דירוגים מרביים ומאפיינים חשמליים
| Core Architecture | 8-bit AVR RISC (Harvard) |
| Family | ATmega (picoPower) |
| Program Memory (Flash) | 32 KB |
| EEPROM | 1 KB |
| SRAM | 2 KB |
| Maximum CPU Speed | 20 MHz |
| מתח אספקה | 2.7 V to 5.5 V (4.5 V to 5.5 V at 20 MHz) |
| General-Purpose I/O | 54 |
| Timers/Counters | Two 8-bit + One 16-bit |
| ADC | 8-channel, 10-bit |
| Serial Interfaces | USART, SPI, TWI (I2C) |
| LCD Controller | Up to 4x25 segments (integrated) |
| טמפרטורת פעולה | -40C to +85C (Industrial) |
| מארז | 64-pin TQFP (14x14 mm, 0.8 mm pitch) |
| סוג הרכבה | Surface Mount |
| Programming Interface | JTAG / debugWIRE / ISP |
| סטטוס RoHS | Compliant |
| רמת MSL | 3 (168 hours) |
תצורת פינים של ATMEGA329PA-AUR
| פין 1 | PB5 (SCK/PCINT5) — Port B bit 5, SPI clock / pin-change interrupt |
| פין 2 | PB6 (PCINT6) — Port B bit 6, pin-change interrupt |
| פין 3 | PB7 (PCINT7) — Port B bit 7, pin-change interrupt |
| פין 4 | RESET — Reset input, active low |
| פין 5 | VCC — Digital supply voltage |
| פין 6 | GND — Ground |
| פין 7 | XTAL2 — Crystal oscillator output |
| פין 8 | XTAL1 — Crystal oscillator input |
| פין 9 | PD0 (RXD/PCINT24) — Port D bit 0, USART RX |
| פין 10 | PD1 (TXD/PCINT25) — Port D bit 1, USART TX |
| פין 11 | PD2 (INT0/PCINT26) — Port D bit 2, external interrupt 0 |
| פין 12 | PD3 (INT1/PCINT27) — Port D bit 3, external interrupt 1 |
| פין 13 | PD4 (OC1B/PCINT28) — Port D bit 4, timer compare output |
| פין 14 | PD5 (OC1A/PCINT29) — Port D bit 5, timer compare output |
| פין 15 | PD6 (OC2B/ICP1/PCINT30) — Port D bit 6, timer/capture |
| פין 16 | PD7 (OC2A/PCINT31) — Port D bit 7, timer output |
| פין 17 | VCC — Digital supply voltage |
| פין 18 | GND — Ground |
| פין 19 | PC0 (A8/PCINT16) — Port C bit 0, analog ch 8 |
| פין 20 | PC1 (A9/PCINT17) — Port C bit 1, analog ch 9 |
| פין 21 | PC2 (A10/PCINT18) — Port C bit 2, analog ch 10 |
| פין 22 | PC3 (A11/PCINT19) — Port C bit 3, analog ch 11 |
| פין 23 | PC4 (A12/PCINT20) — Port C bit 4, analog ch 12 |
| פין 24 | PC5 (A13/PCINT21) — Port C bit 5, analog ch 13 |
| פין 25 | PC6 (A14/PCINT22) — Port C bit 6, analog ch 14 |
| פין 26 | PC7 (A15/PCINT23) — Port C bit 7, analog ch 15 |
| פין 27 | AVCC — Analog supply voltage |
| פין 28 | AGND — Analog ground |
| פין 29 | AREF — ADC reference voltage |
| פין 30 | PA0 (ADC0/PCINT0) — Port A bit 0, analog ch 0 |
| פין 31 | PA1 (ADC1/PCINT1) — Port A bit 1, analog ch 1 |
| פין 32 | PA2 (ADC2/PCINT2) — Port A bit 2, analog ch 2 |
| פין 33 | PA3 (ADC3/PCINT3) — Port A bit 3, analog ch 3 |
| פין 34 | PA4 (ADC4/PCINT4) — Port A bit 4, analog ch 4 |
| פין 35 | PA5 (ADC5/PCINT5) — Port A bit 5, analog ch 5 |
| פין 36 | PA6 (ADC6/PCINT6) — Port A bit 6, analog ch 6 |
| פין 37 | PA7 (ADC7/PCINT7) — Port A bit 7, analog ch 7 |
| פין 38 | VCC — Digital supply voltage |
| פין 39 | GND — Ground |
| פין 40 | PE0 (RXD0/PCINT8) — Port E bit 0, USART0 RX |
| פין 41 | PE1 (TXD0/PCINT9) — Port E bit 1, USART0 TX |
| פין 42 | PE2 (XCK0/AIN0/PCINT10) — Port E bit 2, USART clock / analog comp + |
| פין 43 | PE3 (OC3A/AIN1/PCINT11) — Port E bit 3, timer output / analog comp - |
| פין 44 | PE4 (OC3B/INT4/PCINT12) — Port E bit 4, timer output / IRQ4 |
| פין 45 | PE5 (OC3C/INT5/PCINT13) — Port E bit 5, timer output / IRQ5 |
| פין 46 | PE6 (T3/INT6/PCINT14) — Port E bit 6, timer3 / IRQ6 |
| פין 47 | PE7 (ICP3/INT7/PCINT15) — Port E bit 7, input capture / IRQ7 |
| פין 48 | PF0 (ADC8/PCINT32) — Port F bit 0, analog ch 8 / LCD segment |
| פין 49 | PF1 (ADC9/PCINT33) — Port F bit 1, analog ch 9 / LCD segment |
| פין 50 | PF2 (ADC10/PCINT34) — Port F bit 2, analog ch 10 / LCD segment |
| פין 51 | PF3 (ADC11/PCINT35) — Port F bit 3, analog ch 11 / LCD segment |
| פין 52 | PF4 (ADC12/PCINT36) — Port F bit 4, analog ch 12 / LCD segment |
| פין 53 | PF5 (ADC13/PCINT37) — Port F bit 5, analog ch 13 / LCD segment |
| פין 54 | PF6 (ADC14/PCINT38) — Port F bit 6, analog ch 14 / LCD segment |
| פין 55 | PF7 (ADC15/PCINT39) — Port F bit 7, analog ch 15 / LCD segment |
| פין 56 | PG0 — Port G bit 0, LCD segment |
| פין 57 | PG1 — Port G bit 1, LCD segment |
| פין 58 | VCC — Digital supply voltage |
| פין 59 | GND — Ground |
| פין 60 | PG2 — Port G bit 2, LCD segment |
| פין 61 | PG3 — Port G bit 3, LCD segment |
| פין 62 | PG4 — Port G bit 4, LCD segment / TOSC2 |
| פין 63 | TOSC1 — RTC oscillator input |
| פין 64 | TOSC2 — RTC oscillator output |
יישומים טיפוסיים
ATMEGA329PA-AUR מתאים עבור 6 יישוםs: Industrial Control Panels with LCD, Consumer Appliance User Interfaces, Portable Medical Monitoring Devices, Security and Alarm Panels, Battery-Powered IoT Sensor Hubs, Automotive Body Control Modules.
Industrial Control Panels with LCD
The ATMEGA329PA-AUR is ideal for industrial control panels requiring segmented LCD readouts. Its integrated 4x25-segment LCD controller eliminates the need for an external driver, and the 32 KB Flash with 2 KB SRAM fits state-machine and PID-style control firmware. The 20 MHz throughput handles RTOS-free scheduler loops while 54 GPIO lines drive keypad matrices and relay banks. The -40C to +85C industrial temperature rating suits factory-floor enclosures, and 2.7 V to 5.5 V operation accepts 24 V bus-derived rails after local regulation.
מומלץ
Consumer Appliance User Interfaces
The ATMEGA329PA-AUR powers washing machine, microwave, and HVAC front panels by combining LCD segment driving with capacitive touch sensing via the QTouch peripheral library. Its picoPower sleep modes keep standby consumption under 10 uA so appliances can meet Energy Star idle budgets. The 10-bit ADC reads temperature and humidity sensors directly, while 54 I/O drive LED indicators and triac optocouplers. Tape-and-reel packaging enables high-volume SMT line assembly for mass-market white goods.
מומלץ
Portable Medical Monitoring Devices
In portable medical devices such as glucose meters and pulse oximeters, the ATMEGA329PA-AUR offers enough Flash (32 KB) for FDA-class firmware and EEPROM (1 KB) for patient log storage. Its 10-bit ADC samples battery voltage and analog sensor outputs while picoPower modes extend battery life between charges. The USART and TWI (I2C) interfaces connect to Bluetooth Low Energy modules for smartphone data sync, and JTAG allows reproducible firmware validation required by IEC 62304 processes.
מומלץ
Security and Alarm Panels
The ATMEGA329PA-AUR fits security alarm panels by integrating a self-programmable Flash for OTA firmware patches, 32 KB EEPROM-emulated log storage for event records, and 54 GPIO to read door/window zones and drive sirens. Its RTC with external 32.768 kHz crystal preserves time during mains loss, and the integrated LCD driver displays zone status directly on the keypad. Wide 2.7 V to 5.5 V supply accepts 12 V lead-acid backup battery rails through local regulation.
מומלץ
Battery-Powered IoT Sensor Hubs
The ATMEGA329PA-AUR functions as a battery-driven IoT sensor hub thanks to picoPower modes that drop consumption below 1 uA in deep sleep with the LCD still updating. Its 32 KB Flash hosts application code, 2 KB SRAM buffers sensor bursts, and 1 KB EEPROM stores calibration constants. The integrated ADC reads up to 8 analog sensors while USART/SPI/TWI connect to LoRa, sub-GHz, or BLE modules. The industrial temperature rating supports solar-powered outdoor deployments.
מומלץ
Automotive Body Control Modules
The ATMEGA329PA-AUR can be used in non-safety automotive body controllers such as mirror adjusters, seat controllers, and HVAC blend-door drivers. Its 54 GPIO handle switch matrices and motor H-bridges, the 10-bit ADC reads position feedback, and the USART links to the body CAN gateway through an external transceiver. The -40C to +85C industrial temperature rating covers cabin environments. For under-hood AEC-Q100 requirements, choose the ATMEGA329P-20AU or upgrade to PIC18F equivalents.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור ATMEGA329PA-AUR — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | ATMEGA329P-20AU | ATMEGA329-16AU | ATMEGA329A-AU | ATMEGA3290PA-AUR | ATMEGA3290P-20AUR | ATMEGA325PA-AUR |
|---|---|---|---|---|---|---|---|
| Package | 64-TQFP (14x14 mm) | 64-TQFP (14x14 mm) - same | 64-TQFP (14x14 mm) - same | 64-TQFP (14x14 mm) - same | 64-TQFP (14x14 mm) - same | 64-TQFP (14x14 mm) - same | 64-TQFP (14x14 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB | 256 KB | 16 KB |
| Maximum Clock Speed | 20 MHz | 20 MHz | 16 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| GPIO Count | 54 | 54 | 54 | 54 | 54 | 54 | 54 |
| LCD Segments | 4x25 (100 segments) | 4x25 | 4x25 | 4x25 | 4x40 (160 segments) | 4x40 | 4x25 |
| picoPower Sleep Modes | Yes (6 modes) | Yes | No | No | Yes | Yes | Yes |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
| Unit Price (qty 1, approx.) | $9.20 | $8.95 | $8.20 | $7.85 | $9.65 | $11.20 | $8.40 |
מבדילים עיקריים
- Integrated LCD controller with 4x25 segments (לעומתATMEGA328P-AU)
- picoPower sleep modes for battery designs (לעומתATMEGA329-16AU)
- 54 GPIO vs 23 GPIO for richer peripheral expansion (לעומתATMEGA328P-AU)
הערות תכנון
Estimated: at 20 MHz, 5 V and fully active, the ATMEGA329PA-AUR draws roughly 10-15 mA. Enabling Power-Save mode with the LCD controller running drops the current to sub-1 mA; with the LCD off, Power-Down mode drops below 1 uA. Always enable the Brown-Out Detector (BOD) at 2.7 V for 3.3 V systems and 4.3 V for 5 V systems to prevent code corruption during brown-outs. Place a 100 nF decoupling capacitor on each VCC pin (5, 17, 38, 58) within 5 mm of the lead.
Estimated: route the 64-TQFP (0.8 mm pitch) with 0.2 mm traces and 0.2 mm spaces through a 4-layer stack-up; the outer layer pads should be 0.4 mm x 1.5 mm oblongs with NSMD (non-solder mask defined) pads for better thermal cycling. Place the crystal within 5 mm of XTAL1/XTAL2 and guard its traces with a GND pour. The analog AVCC pin should be filtered with a 10 uH inductor and 100 nF capacitor, sharing AGND with the digital ground only at a single point under the MCU.
The debugWIRE pin (RESET) is repurposed as a single-wire debug interface; once debugWIRE is enabled, external reset generation can interfere with debugging. Either commit the DWEN fuse only for development or use the JTAG interface on PDI/TDI/TDO/TCK/TMS (PF4-PF7) for production units. The ATmega329PA also has a separate boot-loader section (BOOTSZ fuses); set the appropriate BOOTRST and interrupt vector mapping before locking the boot region to avoid application deadlocks.
מידע על תאימות
RoHS and REACH compliant per Microchip product page. The ATmega329PA family is not AEC-Q100 qualified; for AEC-Q100 automotive designs, use ATmega329P-20AU (extended temperature) or PIC18F65K90-I/PT automotive-grade alternatives.
