Microchip Technology

ATMEGA8-16MI - 16MHz 8-Bit AVR MCU | Microchip Technology

MPN: ATMEGA8-16MI ✓ פעיל
2.7V to 5.5V Vdss 32-VQFN, 5x5 mm Package 16 MHz Speed 8KB (4K x 16 bits) Memory
כמות הזמנה מינימלית: 1 |

ATMEGA8-16MI סקירה

Microchip Technology ATMEGA8-16MI is an 8-bit AVR RISC microcontroller rated for operation at 16MHz, with 8KB of in-system programmable Flash, 512 bytes of EEPROM, 1KB of SRAM, and 23 general-purpose I/O lines in a 32-VQFN 5x5 mm surface-mount package. Its 10-bit ADC supports 6 or 8 analog channels, while the AVR architecture provides up to 16 MIPS throughput at 16MHz.

An 8-bit microcontroller is a compact embedded-control semiconductor that combines a processor core, program memory, data memory, and peripherals on one die. The ATmega8 belongs to the AVR family of 8-bit RISC-based microcontrollers, a product type within embedded processors and integrated circuits. Its combination of deterministic instruction execution, serial interfaces, analog conversion, and modest memory requirements makes it suitable for controllers that monitor inputs and operate actuators without requiring a complex operating system.

Key features include 8KB of Flash organized as 4K by 16 bits, 1KB of internal SRAM, 512 bytes of EEPROM, and 23 general-purpose I/O lines. The device also provides an ADC with 10-bit resolution, SPI, I2C, and UART/USART connectivity. Read-while-write Flash capability supports firmware update workflows, while the three 32-bit general-purpose working-register groups provide fast operand handling in the AVR register architecture.

The ATmega8 executes most instructions in a single clock cycle and supports up to 16 MIPS at its 16MHz operating speed. Its supply range is 2.7V to 5.5V, allowing operation in both 3.3V and 5V embedded systems. The 32-VQFN package uses a compact 5x5 mm footprint suitable for space-constrained equipment, although its exposed-pad thermal design requires careful PCB layout and adequate copper for heat dissipation.

Typical applications include industrial sensing and control, compact motor or actuator controllers, instrument interfaces, communication modules, and embedded products requiring analog measurement plus serial connectivity. The UART/USART can connect the controller to a host computer, while SPI and I2C support expansion devices, sensors, memory, or displays. The ADC is useful for monitoring potentiometers, dividers, temperature sensors, and other analog system signals.

When laying out a board, route the analog and digital grounds carefully, provide local decoupling at VCC and AVCC, and preserve the recommended exposed-pad copper area. Confirm the external clock configuration, ADC reference voltage, fuse settings, and programmed flash contents before production. The industrial-grade ordering code should be validated against the temperature limits and qualification requirements of the finished equipment.

This product page combines the manufacturer specifications with package, application, sourcing, and replacement guidance. It also distinguishes true same-footprint alternatives from devices that only offer similar functionality, helping engineers assess PCB reuse, memory capacity, peripheral compatibility, and operating conditions before selecting a replacement.

חלופות תחליף ישיר עבור ATMEGA8-16MI — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם ATMEGA8-16MI (אותו גורם צורה וטביעת רגל) — שונים ב Program Memory Type.

Microchip Technology
Program Memory Type: Flash
השווה עם ATMEGA8-16MI →

ATMEGA8-16MU

✅ Drop-In
Microchip Technology
📦 32-VQFN (5x5 mm)
AVR 8-bit RISC · 8-bit · 16 MHz · Flash · 8KB (4K x 16) · In-System Programmable (ISP) · 512B · 4.5 V to 5.5 V

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

ATMEGA8-16MI דירוגים מרביים ומאפיינים חשמליים

Microcontroller Type 8-bit AVR RISC microcontroller
תדר שעון מקסימלי 16 MHz
Maximum Throughput 16 MIPS
Program Flash Memory 8KB (4K x 16 bits)
Program Memory Type In-system programmable Flash with read-while-write capability
EEPROM Memory 512 bytes
SRAM Memory 1KB
General-Purpose I/O Lines 23
General-Purpose Working Registers 32
ADC Resolution 10 bits
ADC Channels 6 or 8 channels
Serial Interfaces SPI, I2C, UART/USART
Operating Voltage Range 2.7V to 5.5V
מארז 32-VQFN, 5x5 mm
סוג הרכבה Surface Mount
Instruction Architecture Advanced RISC architecture
Instruction Count 130 instructions

מדריך תצורת פינים של ATMEGA8-16MI 32-vqfn, 5x5 mm

תצורת פינים עבור ATMEGA8-16MI (מארזת 32-vqfn, 5x5 mm). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת 32-vqfn, 5x5 mm עבור ATMEGA8-16MI

אין נתוני פריסת פינים מפורטים עבור ATMEGA8-16MI.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

ATMEGA8-16MI מתאים עבור 6 יישוםs: Industrial Sensor and Control Node, Compact Motor and Actuator Controller, Serial Instrument Interface, Communication and Protocol Hub, Analog Monitoring Panel, Battery-Powered Embedded Module.

🏭

Industrial Sensor and Control Node

The ATMEGA8-16MI fits compact sensing and control nodes that combine analog measurements with digital outputs. Its 10-bit ADC can acquire as many as 8 analog channels, while 23 general-purpose I/O lines provide connections for sensors, indicators, interlocks, and discrete actuators. At 16MHz the AVR core provides up to 16 MIPS, allowing the firmware to filter measurements and update outputs without an external processor. The 2.7V to 5.5V operating range supports both 3.3V and 5V industrial electronics, although the power design must preserve a stable analog reference. Use SPI or I2C when a controller must interface with an external sensor or memory device.

⚡

Compact Motor and Actuator Controller

The ATMEGA8-16MI can serve as the supervisory controller in a small motor, solenoid, or actuator module. Its 23 I/O lines allow a designer to assign command inputs, direction controls, limit-sensor inputs, status indicators, and fault outputs while retaining the 8-bit core for sequencing and protection logic. The 16MHz clock provides a practical balance between response time and power consumption, and the 1KB SRAM supports task state, counters, and communication buffers. An external transistor or motor driver remains necessary for higher current loads. Firmware should include defined startup delays, current-limit checks, and safe output states so that a reset does not unintentionally energize the actuator.

🖥️

Serial Instrument Interface

The ATMEGA8-16MI is appropriate for instruments that need a local control processor and a simple host connection. Its UART/USART supports asynchronous serial communication, while SPI and I2C provide dedicated paths for sensors, displays, or configuration memory. The 8KB of programmable Flash is sufficient for protocol handling, calibration tables, command parsing, and status reporting, while 512 bytes of EEPROM can retain limited setup values. With a 16MHz core speed, the device can service serial traffic and perform real-time control tasks. Designers should calculate baud-rate error, include ESD protection on exposed connectors, and use a defined termination strategy for long or noisy communication lines.

🌐

Communication and Protocol Hub

The ATMEGA8-16MI can act as a compact protocol-conversion or command-distribution hub when a design includes several serial devices. The UART/USART provides a host-facing channel, while SPI and I2C support slower peripherals or configuration devices. Its 8-bit architecture, 16MHz maximum clock, and 1KB SRAM are suitable for lightweight framing, address translation, checksum calculation, and status aggregation rather than high-throughput protocol stacks. Firmware design should define message timeouts, buffer ownership, and bus fault recovery to prevent one peripheral from blocking the entire controller. Keep sensitive clock or communication traces away from switching regulators and noisy motor stages.

📺

Analog Monitoring Panel

The ATMEGA8-16MI supports small analog monitoring panels where several changing signals must be converted and reported. Its 10-bit ADC, available with 6 or 8 channels, can monitor dividers, potentiometers, thermistors, or conditioned sensor outputs, while the digital I/O can operate local indicators or acknowledge external events. The 16MHz operating rate provides ample headroom for oversampling, filtering, calibration, and serial reporting. Accurate measurements depend on the ADC reference, input impedance, sampling time, and grounding arrangement, so analog traces should be separated from switching-node paths. A dedicated analog-supply arrangement and local bypass capacitors help maintain repeatable readings when the controller shares a board with relays or display circuitry.

🧩

Battery-Powered Embedded Module

The ATMEGA8-16MI can support compact embedded modules where a 3.3V supply is available and low board area matters. Its 2.7V minimum operating voltage fits regulated 3.3V rails, while the 32-VQFN 5x5 mm package leaves room for supporting circuits. The 16MHz AVR core permits responsive control, and the 8KB Flash footprint is appropriate for compact firmware rather than elaborate graphical interfaces. Low-power design still depends on the selected ATmega8 clock and fuse configuration, peripheral shutdown behavior, and the external load on the supply. During prototype validation, measure active-current and sleep-current paths with the final firmware because package choice alone does not determine battery life.

What are the key specifications of ATMEGA8-16MI that engineers should know?
The ATMEGA8-16MI is a 16MHz 8-bit AVR microcontroller with 8KB of programmable Flash, 1KB of SRAM, 512 bytes of EEPROM, 23 I/O lines, and a 10-bit ADC. According to the Microchip ATmega8 product page, it combines three serial-interface families—SPI, I2C, and UART/USART—with read-while-write Flash capability in a compact 32-VQFN package.
What is the operating voltage of ATMEGA8-16MI?
The ATMEGA8-16MI operates from 2.7V to 5.5V. According to the ATmega8 technical documentation, this range supports both 3.3V and 5V embedded designs. The selected regulator should maintain the required voltage at the microcontroller power and analog-supply pins under transient load, while board-level decoupling should be placed close to those pins.
How much memory does the ATMEGA8-16MI contain?
The ATMEGA8-16MI contains 8KB of in-system programmable Flash, 1KB of SRAM, and 512 bytes of EEPROM. According to the Microchip ATmega8 product page, Flash is organized as 4K by 16 bits and supports read-while-write operation. These resources suit compact firmware with moderate state retention and limited nonvolatile configuration storage.
Where can I download the ATMEGA8-16MI datasheet PDF?
The official ATMEGA8-16MI technical information begins on the Microchip ATmega8 product page, where device documentation and family-level data can be accessed. According to Microchip, the family uses an advanced RISC core with 8KB of ISP Flash, 512 bytes of EEPROM, 1KB of SRAM, 23 I/O lines, and three timers. Use the ordering-information table to confirm package and grade details.
Where can I find the ATMEGA8-16MI pinout and pin diagram?
The ATMEGA8-16MI uses a 32-VQFN package, and its complete numbered pin diagram must be assigned from the pin-description table in the official ATmega8 documentation. According to Microchip, the device includes 23 general-purpose I/O lines plus power, ground, reset, clock, programming, and analog functions. Do not rely on a generic 32-pin diagram without checking the package-specific assignments.
What is the ATMEGA8-16MI internal architecture?
The ATMEGA8-16MI combines an AVR 8-bit RISC core, 32 general-purpose working registers, Flash program memory, SRAM, EEPROM, and integrated peripherals. According to the Microchip product description, the architecture supports 130 instructions and executes most instructions in one clock cycle. This structure favors compact, predictable control firmware over operating-system-heavy workloads.
What can replace the ATMEGA8-16MI?
The closest documented same-footprint replacement is the ATMEGA8-16MU, which uses the same 32-VQFN format and retains 8KB Flash, 1KB SRAM, 512 bytes of EEPROM, and a 16MHz maximum clock. Because the ordering-grade and thermal requirements still require verification, treat it as a candidate replacement rather than an automatic substitution for every production design.
Is ATMEGA8-16MU the same as ATMEGA8-16MI?
The ATMEGA8-16MU is closely related to the ATMEGA8-16MI and is listed as a direct comparison part with the same 8-bit AVR core, 16MHz speed, 8KB Flash, 1KB SRAM, and 512-byte EEPROM. The ordering suffix identifies the device grade or packing configuration, so confirm the package, temperature range, qualification, and assembly requirements before approving a substitution.
When should I choose ATMEGA8-16MI over ATMEGA8-16MU?
Choose the ATMEGA8-16MI when the finished product specifically requires the industrial ATmega8 ordering configuration in a 32-VQFN package. The ATMEGA8-16MU offers similar core and memory resources, but it is preferable only after its operating-temperature range, qualification status, and exact ordering code have been checked against the target product requirements.
Is ATMEGA8-16MI suitable for analog sensor measurement?
The ATMEGA8-16MI is suitable for basic analog sensor measurement because it includes a 10-bit ADC with 6 or 8 channels. According to Microchip, the device also provides 23 general-purpose I/O lines and SPI, I2C, and UART/USART interfaces. Stable ADC results still depend on a suitable reference, input filtering, grounding, and correct ADC prescaler and conversion settings.
What is the difference between ATMEGA8-16MI and ATMEGA128A-MU?
The ATMEGA8-16MI is an 8-bit AVR device with 8KB Flash, 1KB SRAM, 512 bytes of EEPROM, 16MHz speed, and SPI, I2C, and UART/USART interfaces. The comparison listing identifies ATMEGA128A-MU as another 16MHz 8-bit AVR device, but it belongs to a much larger-memory family and is therefore not a drop-in functional match for the ATMEGA8-16MI.
Where can I buy ATMEGA8-16MI and check its price?
Use the Request a Quote form on this page to request current ATMEGA8-16MI price, inventory status, lead time, and minimum-order quantity. The structured sourcing information is refreshed from current channel data, while the commercial request form provides a direct way to confirm the exact MPN, 32-VQFN package, and required quantity with XAIPART.
What is the lead time for ATMEGA8-16MI?
The current lead time for ATMEGA8-16MI depends on live inventory, package allocation, and production scheduling. Submit the exact MPN and required quantity through the Request a Quote form on this page so that current availability, lead time, minimum order quantity, and delivery terms can be confirmed before committing the component to a build schedule.
Is ATMEGA8-16MI in stock?
Stock status for ATMEGA8-16MI can change as channel inventory and manufacturer allocation are updated. Use the Request a Quote form on this page to request the current stock position for the exact 32-VQFN ordering code and your required quantity. Include the target date in the request when inventory must arrive before a specific production milestone.
What design considerations matter for a 32-VQFN ATMEGA8-16MI PCB?
The main PCB considerations are exposed-pad heat flow, short supply paths, analog grounding, and signal integrity around programming and clock pins. According to Microchip, this is a 32-VQFN 5x5 mm package, so the land pattern and pin assignments should be taken directly from the package drawing. Place decoupling capacitors close to their supply pins and avoid routing fast or analog signals through thermal-relief discontinuities.
Does ATMEGA8-16MI support RoHS, REACH, and automotive qualification?
The ATMEGA8-16MI must be assessed against current environmental and automotive procurement requirements before release. The listed technical data confirms its 8-bit AVR configuration, 16MHz speed, memory configuration, and 32-VQFN package, but it does not explicitly state its RoHS, REACH, or AEC-Q100 status. Request the current manufacturer compliance declaration for the exact ordering code.

נתוני עזר הנדסיים עבור ATMEGA8-16MI — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the ATMEGA8-16MI when the product specification calls for the industrial ATmega8 ordering configuration in a 32-VQFN package and when 8KB Flash, 1KB SRAM, and 512-byte EEPROM are sufficient. It is well suited to compact sensing, monitoring, and serial-control products with 10-bit analog measurement requirements. The ATMEGA8-16MU is the closest documented same-footprint alternative because it preserves the 16MHz clock, memory configuration, ADC, and serial peripherals; however, verify its suffix-specific temperature, qualification, and assembly requirements before substitution. The ATMEGA128A-MU and smaller PIC families are not drop-in choices because they change memory capacity, pin assignments, tooling, or firmware architecture. For products requiring substantially more code storage, SRAM, peripherals, or a modern low-power architecture, treat a migration to another AVR or mixed-signal MCU as a PCB-redesign project rather than a component substitution.

השוואה עם חלופות

פרמטר מוצר זה ATMEGA8-16MU
Brand Microchip Technology Microchip Technology
Package 32-VQFN (5x5 mm) 32-VQFN (5x5 mm)
Core 8-bit AVR RISC 8-bit AVR RISC
Maximum Clock Frequency 16MHz 16MHz
Program Flash Memory 8KB (4K x 16 bits) 8KB
SRAM Memory 1KB 1KB
EEPROM Memory 512 bytes 512 bytes
ADC Resolution 10 bits, 6 or 8 channels 10 bits, 6 or 8 channels
Operating Voltage Range 2.7V to 5.5V 2.7V to 5.5V
Ordering-Grade Suffix I suffix U suffix; grade and qualification differences must be checked
Serial Interfaces SPI, I2C, UART/USART SPI, I2C, UART/USART

מבדילים עיקריים

  • Direct industrial-grade ordering configuration (לעומתATMEGA8-16MU)
  • Compact 32-VQFN implementation (לעומתATMEGA8-16MU)
  • Integrated analog and serial resources (לעומתATMEGA8-16MU)

הערות תכנון

Use the package drawing for the 32-VQFN land pattern, exposed-pad geometry, and mask openings rather than constructing the footprint from the body dimensions alone. Place VCC and AVCC bypass capacitors close to their respective pins, route the exposed pad to the ground plane according to the recommended layout, and keep programming, reset, and clock traces short. A continuity review between the schematic pin names and the final footprint is essential before fabrication.

Separate analog inputs from digital switching paths and give the ADC reference a low-impedance source. Route the reference and analog ground through quiet regions of the PCB, and use a consistent ground strategy beneath the analog section. If the module also contains relays, motor drivers, or DC-DC converters, maintain physical spacing between those stages and the ATmega8-16MI so switching transients do not dominate the measured analog signal.

Do not approve a replacement based only on speed and memory capacity. Verify the exact package pinout, suffix-specific temperature range, clock limits, ADC channels, programming method, and fuse or boot configuration. The ATMEGA8-16MU is a close 32-VQFN candidate, but its ordering-grade suffix differs; qualification and operating-temperature requirements must be checked before treating it as an unqualified drop-in replacement.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The current manufacturer product information confirms the ATmega8 family and ATMEGA8-16MI ordering code but does not explicitly provide RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. Request the current compliance documents for the exact MPN before procurement.

הנתונים אומתו בתאריך: 2026-11-09 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

ATMEGA8-16MI datasheet ATMEGA8-16MI pinout ATMEGA8-16MI price ATMEGA8-16MI 32-VQFN footprint ATMEGA8-16MI equivalent ATMEGA8-16MI replacement ATMEGA8-16MI vs ATMEGA8-16MU ATMEGA8-16MI internal architecture ATMEGA8-16MI block diagram ATMEGA8-16MI 16MHz 8KB Flash ATMEGA8-16MI SMD microcontroller ATMEGA8-16MI ADC channels ATMEGA8-16MI pin diagram Microchip ATMEGA8-16MI ATMEGA8-16MI SPI I2C UART

רכיבים ומונחים קשורים

Microchip Technology ATMEGA8-16MI ATMEGA8-16MU ATmega8 AVR 8-bit microcontroller RISC architecture embedded microcontroller embedded processor integrated circuit semiconductor in-system programmable Flash read-while-write Flash SRAM EEPROM 10-bit ADC SPI I2C UART/USART 32-VQFN QFN family surface-mount package SMD 16MHz 16 MIPS 2.7V to 5.5V industrial control sensor monitoring serial interface 23 general-purpose I/O lines
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר