Microchip Technology

ATTINY26-16MU - 16MHz 8-Bit AVR MCU | Microchip Technology

MPN: ATTINY26-16MU ✓ פעיל
32-VQFN (5 mm x 5 mm) Package 16 MHz Speed 2 KB (1K x 16 bits) Memory
כמות הזמנה מינימלית: 1 |

ATTINY26-16MU סקירה

The Microchip Technology ATTINY26-16MU is an 8-bit AVR RISC microcontroller with a 16 MHz clock, 2 KB of Flash program memory, and a 32-pin VQFN package measuring 5 mm by 5 mm. The device also includes 128 bytes of EEPROM and 128 bytes of internal SRAM, making it suitable for compact embedded control, sensing, and low-power automation products. Its industrial-temperature ordering code is -16MU, and the -MUR option denotes a reel-packed production variant.

A microcontroller is a programmable control component that integrates a processor core, nonvolatile memory, working memory, and peripherals such as timers and analog converters on one integrated circuit. The ATTINY26 belongs to the AVR family of 8-bit RISC controllers, a category positioned between simple logic controllers and higher-performance 32-bit microcontrollers. Its compact footprint and low component count help reduce board area, assembly cost, and overall system complexity.

The ATTINY26-16MU provides 2 KB of Flash memory organized as 1K by 16 bits, 128 bytes of EEPROM for retained configuration, and 128 bytes of SRAM for working variables. According to the Microchip ATtiny26 Summary Datasheet (1477S), the device includes one 8/16-bit timer/counter with prescaler and one 8/10-bit high-speed timer/counter with PWM support. The Mouser product record also identifies an integrated ADC, expanding the range of analog measurements that can be handled without an external converter.

At 16 MHz, the AVR core executes a compact instruction set suited to event-driven control loops, pulse generation, signal counting, and small protocol stacks. Its 8-bit architecture simplifies timer arithmetic and register access, while flash-based firmware allows field updates through the AVR programming interface. The internal EEPROM gives designers a place to store calibration values, serial numbers, or configuration data without adding an external memory component.

Typical uses include motor-speed control, LED lighting, sensor-conditioning nodes, small appliance controls, and industrial automation modules. The 32-VQFN package is especially useful in space-constrained products where a 20-pin SOIC would be too large. Because the exposed-pad package requires careful layout, designers should follow the manufacturer land-pattern and thermal-via guidance rather than treating it as a leaded package.

When designing the PCB, reserve the programming interface, verify the ADC input voltage limits, and confirm that the operating supply matches the device specification. Place input and decoupling capacitors close to their associated pins, and provide adequate thermal copper under the exposed pad. Firmware should include watchdog, brownout, and unused-port handling appropriate to the end product.

This page combines the official device characteristics, package details, and programming guidance with a drop-in comparison, application analysis, and practical layout notes. It is intended to help engineers evaluate the ATTINY26-16MU quickly while still requiring verification against the complete manufacturer documentation before a production release.

חלופות תחליף ישיר עבור ATTINY26-16MU — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם ATTINY26-16MU (אותו גורם צורה וטביעת רגל) — שונים ב EEPROM, Package, Maximum Clock Frequency, Architecture, Flash Memory.

Microchip Technology
EEPROM: 128 B
Package: 32-VQFN (5x5 mm)
Maximum Clock Frequency: 20 MHz
השווה עם ATTINY26-16MU →
Microchip Technology
EEPROM: 256 B
Package: 32-VQFN (5 x 5 mm)
Maximum Clock Frequency: 20 MHz
השווה עם ATTINY26-16MU →

ATTINY261A-MU

✅ Drop-In
Microchip Technology
📦 32-VQFN (5 mm x 5 mm)
8-bit RISC-based AVR microcontroller · 20 MHz · 2 KB Flash (1K x 16) · 128 B · 128 B · 16 · 32 · 8-bit with compare modes

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

ATTINY461A-MU

✅ Drop-In
Microchip Technology
📦 32-VQFN (5 mm x 5 mm)
8-bit AVR RISC · 20 MHz · 4 KB (2K x 16) · 256 B · 256 B · 16 lines · 32 · 8-bit with compare modes

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

ATTINY26-16MU דירוגים מרביים ומאפיינים חשמליים

Product Type 8-bit AVR RISC Microcontroller
תדר שעון מקסימלי 16 MHz
Flash Memory 2 KB (1K x 16 bits)
EEPROM 128 bytes
Internal SRAM 128 bytes
ADC Integrated ADC
Timer/Counter 1 8/16-bit with prescaler
Timer/Counter 2 8/10-bit high-speed with PWM
מארז 32-VQFN (5 mm x 5 mm)
סוג הרכבה Surface Mount
Programming Interface AVR ISP
Core Architecture AVR 8-bit RISC
סטטוס RoHS unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable

מדריך תצורת פינים של ATTINY26-16MU 32-vqfn (5 mm x 5 mm)

תצורת פינים עבור ATTINY26-16MU (מארזת 32-vqfn (5 mm x 5 mm)). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת 32-vqfn (5 mm x 5 mm) עבור ATTINY26-16MU

אין נתוני פריסת פינים מפורטים עבור ATTINY26-16MU.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

ATTINY26-16MU מתאים עבור 6 יישוםs: Small DC Motor and Fan Control, Industrial Sensor Conditioning Node, LED Lighting and Dimming Controller, Battery-Powered Remote Control, Appliance and Household Control Module, Power-Supply Auxiliary Controller.

🔧

Small DC Motor and Fan Control

The ATTINY26-16MU is appropriate for compact motor and fan controllers because its 8/10-bit high-speed timer provides PWM output while the 16 MHz clock supports fast feedback calculations. The 2 KB Flash footprint is sufficient for a dedicated speed-control loop, direction logic, and fault handling, and 128 bytes of EEPROM can retain calibration values. Place the MCU close to the driver circuitry to minimize switching-node coupling, and use the PWM output to control a transistor or MOSFET gate drive. The 32-VQFN footprint saves board area, although the exposed pad requires proper thermal-via placement.

🏭

Industrial Sensor Conditioning Node

The integrated ADC and 128 bytes of SRAM make the ATTINY26-16MU useful for a compact sensor node that converts analog inputs into local switching or reporting signals. A 16 MHz AVR core can sample, filter, and threshold a sensor signal without requiring an external converter, while 2 KB of Flash accommodates a focused acquisition routine. Keep analog traces short and separate from digital timing paths, and reference the pin-description table before assigning ADC channels. For designs needing greater program flexibility, ATMEGA48PA-MN provides a higher-resource AVR alternative.

💡

LED Lighting and Dimming Controller

The ATTINY26-16MU fits LED drivers and dimming modules because its PWM-capable high-speed timer can generate the required duty cycle from a 16 MHz clock. The compact 32-VQFN package also leaves more board area for the power stage than a larger leaded controller. Firmware can implement current regulation, soft start, thermal derating, and open-load detection within the available 2 KB Flash. Route the PWM trace away from sensitive analog feedback and use the exposed pad as the thermal and ground connection specified by the package drawing.

📱

Battery-Powered Remote Control

An ATTINY26-16MU-based remote can combine button decoding, wake-up handling, and an encoded output in a very small board. Its 128-byte EEPROM provides a convenient location for pairing codes or configuration, while the limited 128-byte SRAM is adequate for short control frames and stack use. An event-driven firmware design avoids unnecessary continuous processing and supports longer battery life. Select the supply and operating limits from the complete manufacturer documentation, and confirm programmer-signal levels before adding an ISP connector to a low-energy design.

🔧

Appliance and Household Control Module

The ATTINY26-16MU is suitable for dedicated appliance controls that coordinate buttons, relays, LEDs, and a small motor or heater command. Its 16 MHz processing rate permits responsive debouncing and state-machine control, while the 2 KB Flash is appropriate for a focused application rather than a connectivity-heavy firmware stack. The 32-VQFN package reduces size in products where every millimeter matters. Add appropriate protection for relay contacts and mains-connected nodes, and isolate switching transients from the controller ground and signal routing.

⚡

Power-Supply Auxiliary Controller

The ATTINY26-16MU can manage auxiliary functions in a power module, including fan control, status LEDs, button handling, and supervisory logic around a primary converter. Its timers support periodic measurement and PWM commands, while the ADC permits monitoring an analog control point. Keep the controller separated from high-dv/dt switching nodes, provide a stable local supply, and route the exposed pad to a quiet ground structure. ATMEGA1609-MF is a useful comparison point when the design requires more flash, RAM, or general-purpose peripheral capacity.

What are the key specifications of ATTINY26-16MU?
The ATTINY26-16MU is an 8-bit AVR RISC microcontroller operating at up to 16 MHz, with 2 KB of Flash memory, 128 bytes of EEPROM, 128 bytes of SRAM, and an integrated ADC. The Microchip ATtiny26 Summary Datasheet (1477S) also identifies an 8/16-bit timer/counter with prescaler and an 8/10-bit high-speed timer/counter with PWM. The device is packaged in a 5 mm by 5 mm, 32-pin VQFN for compact embedded designs.
Where can I download the ATTINY26-16MU datasheet PDF?
The official Microchip ATtiny26 Summary Datasheet is available as the 1477S PDF on the Microchip document server. It summarizes the AVR architecture, memory organization, timers, analog converter, package options, and development tools for the ATtiny26 family. Use the ATtiny26 product page together with this document when checking device-specific limits, electrical characteristics, and the 32-VQFN land pattern.
Where can I find the ATTINY26-16MU pinout?
The ATTINY26-16MU pinout is shown in the pin-description and package-drawing sections of the Microchip ATtiny26 Summary Datasheet (1477S). Because this is a 32-pin VQFN with an exposed thermal pad, use the numbered pin configuration diagram together with the package dimensions and land-pattern guidance. The exposed pad is a thermal and electrical connection to ground rather than a normal signal pin.
What is the memory configuration of the ATTINY26-16MU?
The ATTINY26-16MU contains 2 KB of Flash program memory organized as 1K by 16 bits, 128 bytes of EEPROM, and 128 bytes of internal SRAM. According to the Microchip ATtiny26 Summary Datasheet (1477S), the Flash array stores executable firmware, the EEPROM retains configuration or calibration data across power cycles, and the SRAM supports stack and working-variable storage. Its 128-byte SRAM makes compact data-handling routines practical.
Does ATTINY26-16MU have an ADC and PWM capability?
Yes, the ATTINY26-16MU includes an analog-to-digital converter and PWM-capable timer resources. The Microchip ATtiny26 Summary Datasheet (1477S) identifies one 8/10-bit high-speed timer/counter with PWM, while the product record identifies an integrated ADC. These peripherals support analog sensor acquisition, duty-cycle-controlled power stages, lighting regulation, and periodic sampling without requiring separate analog or timing ICs.
Can ATTINY261A-MU replace ATTINY26-16MU?
The ATTINY261A-MU is the closest same-family candidate in a comparable 32-VQFN configuration, but it should be treated as a design review rather than an automatic substitution. Both devices are 16 MHz AVR controllers with 2 KB of Flash, while the ATTINY261A family provides additional peripheral and timer resources. Confirm the exact pin mapping, analog functions, timer channels, and application firmware in the manufacturer documentation before releasing it as a drop-in replacement.
When should I choose ATTINY26-16MU instead of ATTINY261A-MU?
Choose the ATTINY26-16MU when the application needs the established 2 KB AVR platform, modest timer requirements, and a compact 32-VQFN footprint without paying for additional controllers. Select the ATTINY261A-MU when a project benefits from the expanded peripheral set of the newer family or needs broader control capability. Both should be evaluated against the same ADC, PWM, pin-multiplexing, and firmware requirements.
Is ATTINY26-16MU suitable for low-power sensor nodes?
The ATTINY26-16MU is suitable for compact low-power sensing because it combines 2 KB of Flash, 128 bytes of EEPROM, 128 bytes of SRAM, timers, and an ADC in one small package. Its 8-bit AVR core can remain event-driven and spend limited time processing sensor inputs. Confirm the active and sleep-mode current figures against the Microchip ATtiny26 Summary Datasheet (1477S) for the chosen clock, peripheral, and ADC configuration.
What is the best drop-in replacement for ATTINY26-16MU?
The ATTINY261A-MU is the most practical same-brand candidate for a 32-VQFN replacement because it retains the 16 MHz, 2 KB Flash, 128-byte EEPROM, and 128-byte SRAM class of device. No verified cross-brand AVR drop-in replacement is identified for this package because competitors generally use different instruction sets and peripheral assignments. Verify the complete pin and peripheral mapping before treating either part as interchangeable.
What can replace ATTINY26-16MU in an existing design?
An existing design can be evaluated against the ATTINY261A-MU in the same 32-VQFN family, with special attention to ADC inputs, PWM outputs, timer functions, and pin multiplexing. The ATTINY26-16MUR uses the same device in reel packaging, but it is a logistics variant rather than a functional upgrade. A cross-brand controller may require firmware changes, a different development toolchain, or PCB modifications.
What are the common ATTINY26-16MU design pitfalls?
The most common design risks are treating the 32-VQFN exposed pad like a normal pin, neglecting its thermal and ground connection, and assuming that any 32-pin MCU is firmware-compatible. Follow the manufacturer package drawing for pad geometry and vias, confirm the exact pin-description table, and verify every ADC, power, programming, and timer connection. Prototype the programmed board before committing the layout to volume production.
Can ATTINY26-16MU be programmed with AVR IDE and the AVR toolchain?
Yes, the ATtiny26 is supported by the AVR development ecosystem, and the Microchip ATtiny26 Summary Datasheet (1477S) mentions macro assemblers, debuggers, simulators, in-circuit emulators, and evaluation kits. The device can be developed in AVR IDE or another GCC-based AVR workflow, then programmed through the ISP interface. Keep the ISP connector accessible and follow the voltage-level guidance for the selected programmer.
What is the ATTINY26-16MU price at XAIPART?
Current commercial terms for the ATTINY26-16MU are handled through the Request a Quote form on this page. Submit the required quantity, target date, and shipment destination so the order can be reviewed against current component sourcing. The form is the appropriate route for obtaining current availability, lead-time, and unit-price confirmation without relying on an outdated listing.
Is ATTINY26-16MU in stock and what is its lead time?
Stock and lead time for the ATTINY26-16MU should be confirmed through the Request a Quote form on this page. Include your required quantity, production schedule, and acceptable packing format when submitting the request. This allows procurement to check the current channel position and schedule for the exact 32-VQFN ordering code, ATTINY26-16MU, rather than a different package suffix.
How do I choose between ATTINY26-16MU and ATTINY461A-MU?
Choose the ATTINY26-16MU for a 2 KB Flash control design, and consider the ATTINY461A-MU when a larger Flash footprint or expanded timer resources would simplify the firmware. Both belong to the 8-bit AVR ecosystem and use a compact 32-VQFN option. The decisive factors are memory capacity, ADC and PWM channel requirements, timer architecture, pin mapping, software support, and qualification expectations for the finished product.

נתוני עזר הנדסיים עבור ATTINY26-16MU — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the ATTINY26-16MU for a compact, dedicated controller with modest firmware, an ADC, PWM timing, and a 32-VQFN footprint. Its 2 KB Flash and 128-byte SRAM favor focused sensing, lighting, motor, or appliance-control functions where a larger controller would add unnecessary cost and complexity. Consider the ATTINY261A-MU when the project can benefit from additional timer and peripheral resources while remaining in the AVR ecosystem. Consider the ATTINY461A-MU when greater memory or broader control capability justifies the added resources. Neither same-family candidate should be treated as an automatic substitution: verify the exact 32-pin assignments, ADC channels, PWM outputs, timing functions, programming signals, and exposed-pad requirements. Cross-brand controllers may require a different instruction set, toolchain, firmware, and PCB review.

השוואה עם חלופות

פרמטר מוצר זה ATTINY261A-MU ATTINY461A-MU
Brand Microchip Technology Microchip Technology Microchip Technology
Package 32-VQFN (5 mm x 5 mm) 32-VQFN (5 mm x 5 mm) 32-VQFN (5 mm x 5 mm)
Architecture 8-bit AVR RISC 8-bit AVR RISC 8-bit AVR RISC
Development Ecosystem AVR ISP, AVR IDE, GCC-based AVR toolchain AVR toolchain AVR toolchain

מבדילים עיקריים

  • Compact 32-VQFN implementation with dedicated analog and timing resources (לעומתATTINY261A-MU)
  • Smallest memory footprint in the identified same-package candidates (לעומתATTINY461A-MU)
  • Established AVR development path for compact embedded products (לעומתATTINY261A-MU)

הערות תכנון

Use the 32-VQFN land pattern and exposed-pad connection from the Microchip package drawing. Place the exposed pad on a ground plane and add thermal vias only where the package guidance permits; a generic via pattern copied from another 5 mm QFN can change soldering or thermal performance. Keep the ISP programming pads accessible, and route high-current switching paths around the controller area to reduce ground-bounce coupling.

Treat ADC inputs as sensitive nets even though the converter is integrated. Keep analog traces short, place the analog source close to the relevant pin, and avoid routing them beside PWM outputs, relay drivers, or switching-node connections. If the signal source has meaningful impedance, include a suitable sampling network and verify acquisition timing in firmware. The 16 MHz CPU clock does not remove the need for clean analog layout.

Do not substitute the ATTINY26-16SU in a 32-VQFN design; it uses a different package and land pattern. Likewise, the ATTINY26-16MUR is a reel-packaging order code rather than a functional upgrade. Verify ADC channels, timer outputs, programming pins, power pins, and exposed-pad grounding against the exact device documentation before releasing firmware or authorizing PCB production.

Confirm the device operating-voltage range, ADC reference, and brownout behavior in the complete ATtiny26 documentation before selecting the local supply. Decoupling capacitors should be placed directly at the supply pins with short ground returns, and analog ground should connect to the main ground plane at a controlled point. For battery applications, measure current across sleep, timer, ADC, and active states rather than relying on a single headline consumption figure.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The Microchip ATtiny26 Summary Datasheet (1477S) identifies the ATtiny26 family and its development tools. Specific RoHS, REACH, halogen-free, and conflict-minerals declarations for this ordering code require confirmation from the current manufacturer product or declaration documents.

הנתונים אומתו בתאריך: 2026-11-19 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

attiny26 datasheet attiny26 16su datasheet attiny26 pinout attiny26 arduino ide ATTINY26-16MU datasheet pdf ATTINY26-16MU pinout ATTINY26-16MU specifications ATTINY26-16MU equivalent ATTINY26-16MU replacement ATTINY26-16MU vs ATTINY261A-MU ATTINY26-16MU 32 VQFN footprint Microchip ATTINY26-16MU ATTINY26-16MU price ATTINY26-16MU stock ATTINY26-16MU AVR programming

רכיבים ומונחים קשורים

Microchip Technology ATTINY26-16MU ATTINY261A-MU ATTINY461A-MU ATtiny26 AVR AVR RISC microcontroller 8-bit microcontroller TinyAVR Flash memory EEPROM internal SRAM analog-to-digital converter PWM 16 MHz clock 32-VQFN package QFN package family surface-mount package exposed pad AVR ISP AVR IDE industrial automation motor control LED lighting sensor node
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר