Silicon Labs

C8051F330P - 25MHz 8-bit Mixed-Signal MCU | Silicon Labs

MPN: C8051F330P ✓ פעיל
24-pin DIP Package 25 MHz Speed 8 KB (8K x 8) Memory
כמות הזמנה מינימלית: 1 |

C8051F330P סקירה

The Silicon Labs C8051F330P is an 8-bit, 25 MHz mixed-signal microcontroller with 8 KB of Flash memory in a 24-pin DIP package. It combines an 8051-compatible core, on-chip mixed-signal resources, in-system programming, and on-chip Silicon Labs 2-Wire debug support for compact embedded-control designs.

A mixed-signal microcontroller is a system-on-a-chip device that integrates digital processing and analog measurement or control functions. Within the embedded-control hierarchy, the C8051F330P belongs to the 8-bit MCU family, where the CPU executes control logic while integrated peripherals acquire and condition sensor signals. This combination can reduce component count in instruments, industrial controllers, and compact automation products.

The device operates with an 8-bit architecture at up to 25 MHz and provides 8 KB of Flash program memory. The C8051F330P also includes a 10-channel ADC according to its published part specifications. Its 24-DIP format provides a through-hole footprint suitable for prototypes, educational platforms, and systems assembled with conventional insertion techniques.

The C8051F33x family combines a pipelined 8051-compatible core with mixed-signal peripherals and serial interfaces. On-chip Silicon Labs 2-Wire debug circuitry supports non-intrusive, full-speed, in-circuit debugging of the programmed device in the end application. In-system programming also allows firmware loading and updates without removing the microcontroller from its circuit.

Typical uses include compact industrial controllers, sensor interfaces, digital panel meters, temperature-measurement equipment, and small motor-control subsystems. The 10-channel ADC supports applications that need several analog inputs, while 8 KB of Flash constrains firmware size and makes organized memory planning important for production designs.

The primary design consideration is package selection. The C8051F330P uses a 24-pin DIP package rather than the smaller QFN-20 package used by the C8051F330-GM. PCB designers should therefore preserve the DIP footprint and verify connector, programming-tool, and firmware compatibility before releasing a layout.

This page combines the C8051F330P technical specifications, manufacturer documentation links, package information, application guidance, and a structured comparison framework to support component selection and PCB planning.

חלופות תחליף ישיר עבור C8051F330P — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

C8051F331P

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 24-DIP (0.300 in / 7.62 mm pitch)
Same 24-DIP footprint and pin-out, same 25 MHz pipelined 8051 core, but on-chip flash is reduced versus the 8 KB of the C8051F330P (smaller program memory budget)

📋 חלופה להתייחסות (לא בקטלוג)

C8051F332P

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 24-DIP (0.300 in / 7.62 mm pitch)
Same 24-DIP footprint and pin-out, same 25 MHz pipelined 8051 core, flash size and peripheral mix differ slightly from the 8 KB C8051F330P

📋 חלופה להתייחסות (לא בקטלוג)

C8051F333P

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 24-DIP (0.300 in / 7.62 mm pitch)
Same 24-DIP footprint and pin-out with identical clock rate, higher flash and converter resources than the 8 KB C8051F330P

📋 חלופה להתייחסות (לא בקטלוג)

C8051F334P

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 24-DIP (0.300 in / 7.62 mm pitch)
Same 24-DIP footprint, pin-out and 25 MHz core; additional analog resources relative to the 8 KB C8051F330P

📋 חלופה להתייחסות (לא בקטלוג)

C8051F335P

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 24-DIP (0.300 in / 7.62 mm pitch)
Same 24-DIP footprint and pin-out with more on-chip memory and mixed-signal resources than the C8051F330P

📋 חלופה להתייחסות (לא בקטלוג)

C8051F336P

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 24-DIP (0.300 in / 7.62 mm pitch)
Same 24-DIP footprint and pin-out, identical pipelined 8051 core at up to 25 MHz, greater memory and peripheral capability than the C8051F330P

📋 חלופה להתייחסות (לא בקטלוג)

C8051F330P דירוגים מרביים ומאפיינים חשמליים

Microcontroller Type 8-bit mixed-signal system-on-chip MCU
CPU Architecture Pipelined 8051-compatible core
Data Width 8 bit
תדר שעון מקסימלי 25 MHz
Flash Memory 8 KB (8K x 8)
מארז 24-pin DIP
Total Pin Count 24 pins
ADC Channels 10 channels
Programming Method In-system programming
Debug Interface On-chip Silicon Labs 2-Wire (C2) debug

מדריך תצורת פינים של C8051F330P 24-pin dip

תצורת פינים עבור C8051F330P (מארזת 24-pin dip). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת 24-pin dip עבור C8051F330P

אין נתוני פריסת פינים מפורטים עבור C8051F330P.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

C8051F330P מתאים עבור 6 יישוםs: Compact Industrial Sensor Controller, Digital Panel Meter, Temperature and Process Measurement, Small Motor and Actuator Control, Programmable Logic Controller, Educational and Rapid Prototyping Platform.

🏭

Compact Industrial Sensor Controller

The C8051F330P fits compact sensor controllers because its 10-channel ADC can accept several analog measurements while the 25 MHz 8051-compatible core handles filtering, thresholding, and control logic. The 8 KB Flash capacity supports a focused firmware image for calibration, acquisition routines, and actuator commands. Its 24-pin DIP package also simplifies prototype assembly and socket-based serviceability. Before deployment, verify the operating-temperature limits and analog input characteristics against the manufacturer datasheet.

📺

Digital Panel Meter

The C8051F330P can serve as the processing center of a digital panel meter, using its 10-channel ADC for multiplexed sensor inputs and its 25 MHz clock for acquisition sequencing, calibration, filtering, and display updates. The 8-bit datapath is appropriate for ordinary measurement and control tasks when the firmware remains within the 8 KB Flash limit. A DIP-based board also supports educational builds, hand-assembled prototypes, and straightforward socket replacement during development.

🌡️

Temperature and Process Measurement

For temperature and process measurement, the C8051F330P can combine multiple analog channels with digital compensation and control functions on one device. Its 10-channel ADC reduces the number of external signal-conditioning inputs, while the 25 MHz execution rate supports responsive sampling and filtering. The 8 KB Flash budget requires disciplined organization for conversion routines, calibration coefficients, fault handling, and communications. Validate sensor linearity and input limits in the final analog signal chain.

⚙️

Small Motor and Actuator Control

The C8051F330P can act as the supervisory controller for a small actuator or motor subsystem where an 8-bit MCU must combine digital command logic with analog feedback. The 25 MHz core supports faster control-loop execution than a basic low-speed microcontroller, and the 10-channel ADC can monitor feedback or supervisory conditions. The 24-pin DIP package offers a straightforward development footprint, but drive-stage isolation, timing margins, and fault shutdown behavior must be designed around the external power components.

🔧

Programmable Logic Controller

The C8051F330P is appropriate for compact programmable logic controller modules that combine digital inputs, analog monitoring, timers, and local control functions. Its 8-bit 8051-compatible architecture is easy to target for deterministic embedded logic, while the 10-channel ADC adds measurement capability without a separate converter. The 24-DIP package allows convenient laboratory programming and replacement. Production designs should account for the 8 KB firmware limit and add communications only when their code and data requirements fit the device.

🧑‍🏫

Educational and Rapid Prototyping Platform

The C8051F330P works well in education and rapid-prototyping platforms because it combines a familiar 8051-compatible core, in-system programming, on-chip C2 debug, 8 KB Flash, and a 10-channel ADC in a 24-pin DIP package. Students can mount the device on a solderless board, connect sensors through the analog inputs, and debug firmware in the assembled circuit. The through-hole package is especially convenient for demonstration boards, but each prototype still needs regulated supply decoupling and a correctly oriented programming interface.

What are the key specifications of C8051F330P that engineers should know?
The C8051F330P is an 8-bit mixed-signal microcontroller operating at up to 25 MHz, with 8 KB of Flash memory, a 10-channel ADC, and a 24-pin DIP package. According to the Silicon Labs C8051F33x datasheet, the device uses a pipelined 8051-compatible core. It also includes on-chip Silicon Labs 2-Wire debug circuitry and supports in-system programming, allowing engineers to develop and debug firmware in the assembled application.
Where can I download the C8051F330P datasheet PDF?
The official C8051F33x family datasheet is available from Silicon Labs at https://www.silabs.com/documents/public/data-sheets/C8051F33x.pdf. It covers the C8051F330 and related family members, including the 8051-compatible core, Flash and RAM organization, mixed-signal peripherals, electrical characteristics, package information, and programming details. Use the pin-description and package-outline sections when assigning the C8051F330P signals in a PCB design.
Where can I find the C8051F330P pinout?
Use the pin-assignment table in the official Silicon Labs C8051F33x datasheet to find the C8051F330P pinout and package details. The C8051F330P uses a 24-pin DIP package, so the PCB footprint must follow the numbering and orientation defined by that datasheet. Before fabrication, verify the power, ground, reset, programming, analog-input, and digital-I/O assignments against the exact C8051F330P ordering information.
What is the C8051F330P clock speed and memory configuration?
The C8051F330P runs at up to 25 MHz and contains 8 KB of Flash memory organized as 8K x 8. According to the Silicon Labs C8051F33x datasheet, the MCU uses a high-speed pipelined 8051-compatible core. The 8 KB program-memory ceiling requires firmware designers to budget code and constant storage carefully, particularly when adding protocols, calibration tables, or multiple control algorithms.
How many ADC channels does the C8051F330P have?
The C8051F330P has a 10-channel ADC. This gives a compact design several analog inputs for sensors, potentiometers, or status feedback without requiring a separate external converter. According to the published C8051F330P specifications, the device also includes an 8-bit CPU operating at up to 25 MHz and 8 KB of Flash, making it suitable for compact mixed-signal control systems with several measured inputs.
Can C8051F330P be programmed and debugged in circuit?
Yes. The C8051F330P supports in-system programming and includes on-chip Silicon Labs 2-Wire debug circuitry. According to the Silicon Labs C8051F33x datasheet, the C2 debug interface provides non-intrusive, full-speed, in-circuit debugging of the production device installed in the end application. Keep the programming and debug interface accessible, and route it so programming activity does not interfere with sensitive analog measurements.
C8051F330P vs C8051F330-GM: which package should I choose?
Choose the C8051F330P when a 24-pin DIP footprint is required, and choose the C8051F330-GM when a compact 4 x 4 mm QFN-20 layout is more important. The C8051F330-GM manufacturer page specifies 25 MHz performance, 8 KB of Flash, and 0.75 KB of RAM, while the C8051F330P is listed as a 24-DIP. These package choices are not directly interchangeable without a PCB redesign.
Is C8051F330P suitable for industrial sensor-control systems?
The C8051F330P is suitable for compact sensor-control systems that fit within 8 KB of Flash and use a 24-pin DIP footprint. Its 25 MHz 8051-compatible core can execute control logic, while the 10-channel ADC supports several analog inputs. For factory deployment, verify the operating-temperature range, electrical limits, EMC requirements, and long-term supply status against the manufacturer documentation before approving the design.
When should I choose C8051F330P over C8051F330-GM?
Choose the C8051F330P when through-hole assembly, breadboard prototyping, socketed modules, or a readily inspectable 24-DIP footprint is important. Choose the C8051F330-GM when board area is the priority and the manufacturer specifies a 4 x 4 mm QFN-20 package. The same 25 MHz and 8 KB Flash family positioning does not make the packages drop-in compatible, so the PCB footprint and assembly method must drive the decision.
What can replace the C8051F330P?
No verified drop-in replacement was identified for the C8051F330P. The C8051F330-GM is a closely related family member with the same 25 MHz core speed and 8 KB Flash configuration, but it uses QFN-20 rather than the target's 24-pin DIP package and therefore is not a pin-to-pin replacement. Request a quote for the exact C8051F330P, or use the Request a Quote form to ask about qualified supply options.
Is C8051F330P the same as C8051F330-GM?
No. The C8051F330P and C8051F330-GM share the C8051F330 device family, a 25 MHz 8051-compatible core, and 8 KB of Flash, but their packages differ. The C8051F330P is a 24-pin DIP, whereas the C8051F330-GM is a 4 x 4 mm QFN-20. The QFN version therefore requires a different footprint, different assembly process, and a redesigned land pattern.
Where can I buy C8051F330P online?
Use the Request a Quote form on this page to request current C8051F330P availability, pricing, and order routing. The form is the appropriate commercial channel for this offer and lets the quote team confirm the exact 24-DIP ordering code, quantity, and delivery schedule. Avoid approving an order from a listing that omits the full suffix or shows a different package, because the C8051F330-GM is not mechanically interchangeable.
What is the price of C8051F330P?
Current C8051F330P pricing is handled through the Request a Quote form on this page. The quote can be prepared for the exact 24-DIP device and your requested quantity, allowing the commercial terms and supply schedule to reflect the current order. Price and availability can change with order quantity and market conditions, so request a current quotation before budgeting or placing a purchase order.
What is the lead time for C8051F330P?
Submit the C8051F330P quantity and required delivery date through the Request a Quote form on this page. The quote team can confirm the current lead time, minimum order quantity, and available shipment schedule for the exact 24-DIP part. For production planning, include the target build date and any approved alternate-part rules in the request rather than assuming a fixed delivery interval.
Is C8051F330P in stock?
Request current C8051F330P stock status through the Request a Quote form on this page. The quote team can confirm the available quantity and delivery schedule for the exact 24-DIP ordering code. Because inventory can change quickly, provide your required quantity, project date, and acceptable packaging constraints in the request before committing the component count into a production schedule.
What is the best cross-brand equivalent for C8051F330P?
No cross-brand drop-in equivalent for the C8051F330P was verified. A valid equivalent would require the same 24-pin DIP pinout, compatible power and I/O characteristics, equivalent 8-bit processing performance, and sufficient memory and analog resources. The 10-channel ADC, 25 MHz clock, 8 KB Flash configuration, in-system programming, and Silicon Labs C2 debug interface must also be checked at the firmware and tool level.

נתוני עזר הנדסיים עבור C8051F330P — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the C8051F330P for prototypes, educational platforms, socketed modules, and through-hole assemblies that require an 8051-compatible MCU with a 10-channel ADC, 25 MHz clock, 8 KB Flash, and integrated in-circuit debugging. It is a sensible option when easy replacement and simple breadboard or conventional DIP assembly matter more than minimizing board area. Choose the C8051F330-GM when a 4 x 4 mm QFN-20 footprint is required; it shares the 25 MHz and 8 KB Flash family characteristics but requires a different PCB footprint and surface-mount process. Do not select either family member as a generic substitute without checking memory, peripherals, package, electrical limits, programming, and firmware compatibility. No verified same-package drop-in replacement was identified, so an existing C8051F330P layout should retain the exact 24-DIP pin assignment.

השוואה עם חלופות

פרמטר מוצר זה
Brand Silicon Labs
Package 24-pin DIP
CPU Architecture 8051-compatible core
Data Width 8 bit
Maximum Clock Frequency 25 MHz
Flash Memory 8 KB
ADC Channels 10 channels
Programming and Debug In-system programming with on-chip Silicon Labs 2-Wire debug

מבדילים עיקריים

  • Through-hole package option (לעומתC8051F330-GM)
  • Mixed-signal integration (לעומתC8051F330-GM)
  • Production integration and debug access (לעומתC8051F330-GM)

הערות תכנון

Assign the PCB footprint from the exact 24-pin DIP package drawing in the C8051F33x datasheet, including pin spacing and the notch or pin-1 orientation. Do not reuse a QFN-20 footprint for the C8051F330-P. Keep the programming and C2 debug interface accessible, route sensitive analog inputs away from switching nodes, and place the required bypass capacitors close to their associated supply pins.

The 8 KB Flash limit is the most immediate firmware constraint. Map code and constant storage early, avoid duplicating library routines, and reserve margin for calibration tables, bootloader functions, and future fixes. Do not treat the C8051F330-GM as a pin-compatible substitute because it uses QFN-20; although both are associated with the same device family, their PCB footprints and assembly requirements differ.

The 10-channel ADC should be connected to a planned analog signal chain rather than used as a general-purpose logic input bank. Keep sensor wiring short where practical, provide a defined analog ground strategy, and separate analog traces from high-current switching paths. Review the manufacturer's ADC input range, sampling requirements, and recommended acquisition circuit before fixing the signal-conditioning component values.

Plan the supply network around the electrical limits and decoupling recommendations in the manufacturer datasheet. Place bulk and high-frequency bypass components close to the device, maintain a low-impedance return path, and keep programming-tool ground connections compatible with the analog reference arrangement. Do not infer the operating voltage range from generic 8051 expectations; confirm it for the exact C8051F330P before powering a prototype.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The manufacturer documentation confirms the mixed-signal MCU identity, package, Flash configuration, clock speed, ADC channel count, programming support, and debug interface. Compliance status for the exact ordering code requires confirmation from the manufacturer or its current product documentation.

חיפושים קשורים

c8051f330 datasheet C8051F330P datasheet C8051F330P pinout C8051F330P specifications C8051F330P 24 pin DIP C8051F330P 25MHz C8051F330P 8KB Flash C8051F330P ADC C8051F330P equivalent C8051F330P replacement C8051F330P price Silicon Labs C8051F330P C8051F330P vs C8051F330-GM C8051F330P application circuit

רכיבים ומונחים קשורים

Silicon Labs C8051F330P C8051F330-GM C8051F33x 8-bit microcontroller MCU mixed-signal microcontroller system-on-a-chip 8051-compatible core embedded controller in-system programming Silicon Labs 2-Wire C2 debug interface ADC 10-channel ADC Flash memory 8 KB Flash 25 MHz clock 24-pin DIP QFN-20 industrial sensor control digital panel meter process measurement small motor control
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר